Probing the formation mechanism and chemical states of carbon-supported Pt-Ru nanoparticles by in situ X-ray absorption spectroscopy

The understanding of the formation mechanism of nanoparticles is essential for the successful particle design and scaling-up process. This paper reports findings of an X-ray absorption spectroscopy (XAS) investigation, comprised of X-ray absorption near-edge structure (XANES) and extended X-ray absorption fine structure (EXAFS) regions, to understand the mechanism of the carbon-supported Pt-Ru nanoparticles (NPs) formation process. We have utilized Watanabe's colloidal reduction method to synthesize Pt-Ru/C NPs. We slightly modified the Watanabe method by introducing a mixing and heat treatment step of Pt and Ru oxidic species at 100 degrees C for 8 h with a view to enhance the mixing efficiency of the precursor species, thereby one can achieve improved homogeneity and atomic distribution in the resultant Pt-Ru/C NPs. During the reduction process, in situ XAS measurements allowed us to follow the evolution of Pt and Ru environments and their chemical states. The Pt LIII-edge XAS indicates that when H2PtCl6 is treated with NaHSO3, the platinum compound is found to be reduced to a Pt(II) form corresponding to the anionic complex [Pt(SO3)4]6-. Further oxidation of this anionic complex with hydrogen peroxide forms dispersed [Pt(OH)6]2- species. Analysis of Ru K-edge XAS results confirms the reduction of RuIIICl3 to [RuII(OH)4]2- species upon addition of NaHSO3. Addition of hydrogen peroxide to [RuII(OH)4]2- causes dehydrogenation and forms RuOx species. Mixing of [Pt(OH)6]2- and RuOx species and heat treatment at 100 degrees C for 8 h produced a colloidal sol containing both Pt and Ru metallic as well as ionic contributions. The reduction of this colloidal mixture at 300 degrees C in hydrogen atmosphere for 2 h forms Pt-Ru nanoparticles as indicated by the presence of Pt and Ru atoms in the first coordination shell. Determination of the alloying extent or atomic distribution of Pt and Ru atoms in the resulting Pt-Ru/C NPs reveals that the alloying extent of Ru (JRu) is greater than that of the alloying extent of Pt (JPt). The XAS results support the Pt-rich core and Ru-rich shell structure with a considerable amount of segregation in the Pt region and with less segregation in the Ru region for the obtained Pt-Ru/C NPs.     

聚乙烯吡咯烷酮对Pt/Ru双金属纳米簇的结构和催化性能影响

以乙二醇为还原剂,通过微波热辐射制备得到稳定的Pt/Ru双金属胶体纳米簇,各颗粒粒径在1~2nm范围。考察了聚合物聚乙烯吡咯烷酮（PVP）对Pt/Ru双金属纳米簇表面原子组成及催化性能的影响。结果表明,PVP与金属前体之间的不同相互作用影响Pt/Ru双金属纳米簇的形成。在Pt/Ru双金属纳米簇形成之前加入PVP,Pt原子更容易富集在双金属表面,有利于增加Pt在催化反应中的作用。在PVP稳定的Pt/Ru双金属纳米簇中,除了零价态的Pt、Ru单质外,还存在氧化态的Pt化合物,归因于PVP与Pt前体的相互作用。在环己烯加氢反应中,PVP-Pt/Ru双金属纳米簇显示出比单金属纳米簇更优越的催化性能。     

聚乙烯吡咯烷酮对Pt/Ru双金属纳米簇的结构和催化性能影响

以乙二醇为还原剂,通过微波热辐射制备得到稳定的Pt/Ru双金属胶体纳米簇,各颗粒粒径在1~2 nm范围。考察了聚合物聚乙烯吡咯烷酮(PVP)对Pt/Ru双金属纳米簇表面原子组成及催化性能的影响。结果表明,PVP与金属前体之间的不同相互作用影响Pt/Ru双金属纳米簇的形成。在Pt/Ru双金属纳米簇形成之前加入PVP,Pt原子更容易富集在双金属表面,有利于增加Pt在催化反应中的作用。在PVP稳定的Pt/Ru双金属纳米簇中,除了零价态的Pt、Ru单质外,还存在氧化态的Pt化合物,归因于PVP与Pt前体的相互作用。在环己烯加氢反应中,PVP-Pt/Ru双金属纳米簇显示出比单金属纳米簇更优越的催化性能。     

Formation of Pt-Ru nanoparticles in ethylene glycol solution: an in situ X-ray absorption spectroscopy study

The chemical state and formation mechanism of Pt-Ru nanoparticles (NPs) synthesized by using ethylene glycol (EG) as a reducing agent and their stability have been examined by in situ X-ray absorption spectroscopy (XAS) at the Pt LIII and Ru K edges. It appears that the reduction of Pt(IV) and Ru(III) precursor salts by EG is not a straightforward reaction but involves different intermediate steps. The pH control of the reaction mixture containing Pt(IV) and Ru(III) precursor salts in EG to 11 led to the reduction of Pt(IV) to Pt(II) corresponding to [PtCl4](2-) whereas Ru(III)Cl3 is changed to the [Ru(OH)6](3-) species. Refluxing the mixture containing [PtCl4](2-) and [Ru(OH)6](3-) species at 160 degrees C for 0.5 h produces Pt-Ru NPs as indicated by the presence of Pt and Ru in the first coordination shell of the respective metals. No change in XAS structural parameters is found when the reaction time is further increased, indicating that the Pt-Ru NPs formed are extremely stable and less prone to aggregation. XAS structural parameters suggest a Pt-rich core and a Ru-rich shell structure for the final Pt-Ru NPs. Due to the inherent advantages of the EG reduction method, the atomic distribution and alloying extent of Pt and Ru in the Pt-Ru NPs synthesized by the EG method are higher than those of the Pt-Ru/C NPs synthesized by a modified Watanabe method.     

Pt3Ru6 clusters supported on gamma-Al2O3: synthesis from Pt3Ru6(CO)21(mu3-H)(mu-H)3, structural characterization, and catalysis of ethylene hydrogenation and n-butane hydrogenolysis

The supported clusters Pt-Ru/gamma-Al2O3 were prepared by adsorption of the bimetallic precursor Pt3Ru6(CO)21(mu3-H)(mu-H)3 from CH2Cl2 solution onto gamma-Al2O3 followed by decarbonylation in He at 300 degrees C. The resultant supported clusters were characterized by infrared (IR) and extended X-ray absorption fine structure (EXAFS) spectroscopies and as catalysts for ethylene hydrogenation and n-butane hydrogenolysis. After adsorption, the nu(CO) peaks characterizing the precursor shifted to lower wavenumbers, and some of the hydroxyl bands of the support disappeared or changed, indicating that the CO ligands of the precursor interacted with support hydroxyl groups. The EXAFS results show that the metal core of the precursor remained essentially unchanged upon adsorption, but there were distortions of the metal core indicated by changes in the metal-metal distances. After decarbonylation of the supported clusters, the EXAFS data indicated that Pt and Ru atoms interacted with support oxygen atoms and that about half of the Pt-Ru bonds were maintained, with the composition of the metal frame remaining almost unchanged. The decarbonylated supported bimetallic clusters reported here are the first having essentially the same metal core composition as that of a precursor metal carbonyl, and they appear to be the best-defined supported bimetallic clusters. The material was found to be an active catalyst for ethylene hydrogenation and n-butane hydrogenolysis under conditions mild enough to prevent substantial cluster disruption.     

Synthesis of Pt/Ru bimetallic nanoparticles in high-temperature and high-pressure fluids

A high-temperature and high-pressure flow-reactor system was applied to the synthesis of monometallic ruthenium (Ru) nanoparticles and platinum/ruthenium (Pt/Ru) bimetallic nanoparticles using the thermal reduction of ruthenium ion (Ru(III)) and the mixture of platinum (Pt(IV)) and ruthenium ions in water and ethanol mixture in the presence of poly(N-vinyl-2-pyrrolidone). Monometallic Ru nanoparticles with an average diameter of ca. 2 nm were synthesized above 200 degrees C at 30 MPa. The monometallic Ru nanoparticles tended to make large aggregates in colloidal dispersions. By the reduction of the mixture solution of Pt(IV) and Ru(III) in water and ethanol above 200 degrees C at 30 MPa, Pt/Ru bimetallic nanoparticles with an average diameter of ca. 2.5 nm were synthesized with relatively small size distribution. The EXAFS spectra for the Pt/Ru bimetallic particles indicated that the particle possesses metallic bonds between Pt and Ru atoms in contrast to the case of the nanoparticles produced by thermal reduction under ambient pressure at 100 degrees C [M. Harada, N. Toshima, K. Yoshida, S. Isoda, J. Colloid Interface Sci. 283 (2005) 64], and that the Pt/Ru bimetallic particle has a Pt-core/Ru-shell structure.     

Characterization of Pt-Ru/C catalysts by X-ray absorption spectroscopy and temperature-programmed surface reaction

X-ray absorption spectroscopy (XAS) was employed to characterize carbon black supported Pt-Ru catalysts, which are commercially available to be utilized as the anode of polymeric-electrolyte-membrane fuel cells. Both Pt and Ru were found partially oxidized in the as-received form. Upon exposure to hydrogen at room temperature, the catalysts were completely reduced to the metallic state. The bimetallic nanoparticles on the Pt-Ru/C catalysts possess an inner core enriched in Pt, which is surrounded by a Ru-rich outer shell. Such a core–shell structure retained even at an elevated reduction temperature of 623 K. Temperature-programmed surface reaction (TPSR) was carried out to explore the reactivity of adsorbed CO toward hydrogen on various catalysts. Both the peak temperature of the TPSR profile and the amount of methane generated during the course of TPSR were sensitive to the surface composition of Pt–Ru nanoparticles. In combination of XAS and TPSR results, a slight difference in the nanostructure between two Pt-Ru/C catalysts was manifested.     

Sonochemically prepared platinum-ruthenium bimetallic nanoparticles

Colloidal bimetallic nanoparticles of Pt-Ru have been synthesized by sonochemical reduction of Pt(II) and Ru(III) in aqueous solutions. Transmission electron microscope (TEM) images indicate that sequential reduction of the Pt(II) followed by the Ru(III) produces particles with a core shell (Pt@Ru) morphology. In the presence of sodium dodecyl sulfate, SDS, as a stabilizer, the particles have diameters between 5 and 10 nm. When polyvinyl-2-pyrrolidone, PVP, is used as the stabilizer, the rate of reduction is much faster, giving ultrasmall bimetallic particles of approximately 5 nm diameter.     

Novel method for the synthesis of hydrophobic Pt-Ru nanoparticles and its application to preparing a Nafion-free anode for the direct methanol fuel cell

Pt-Ru alloy is a bimetallic catalyst most commonly used in the direct methanol fuel cell (DMFC). In this paper, a new process to synthesize an unsupported Pt-Ru colloid has been introduced. The characteristics of synthesized nanoparticles were identified by XRD, TEM/EDX, and SEM, and it shows that Ru atoms are incorporated into the Pt fcc structure and the well-dispersed particles (diameter approximately 4 nm) possess a Pt-rich feature. This catalyst shows a hydrophobic characteristic which can adsorb very well on the hydrophobic-treated carbon paper or carbon cloth without the need of Nafion. Accordingly, this method can avoid particle agglomeration, and the synthesized catalyst demonstrates strong adsorption with carbon paper. In addition, this colloid-type Nafion-free catalyst was measured via linear sweep voltammetry (LSV) and exhibited electrochemical activity for methanol oxidation comparable to the commercial one with Nafion binding.     

Evidence of Nonelectrochemical Shift Reaction on a CO-Tolerant High-Entropy State Pt-Ru Anode Catalyst for Reliable and Efficient Residential Fuel Cell Systems

A randomly mixed monodispersed nanosized Pt-Ru catalyst, an ultimate catalyst for CO oxidation reaction, was prepared by the rapid quenching method. The mechanism of CO oxidation reaction on the Pt-Ru anode catalyst was elucidated by investigating the relation between the rate of CO oxidation reaction and the current density. The rate of CO oxidation reaction increased with an increase in unoccupied sites kinetically formed by hydrogen oxidation reaction, and the rate was independent of anode potential. Results of extended X-ray absorption fine structure spectroscopy showed the combination of N(Pt-Ru)/(N(Pt-Ru) + N(Pt-Pt)) ? M(Ru)/(M(Pt) + M(Ru)) and N(Ru-Pt)/(N(Ru-Pt) + N(Ru-Ru)) ? M(Pt)/(M(Ru) + M(Pt)), where N(Pt-Ru)(N(Ru-Pt)), N(Pt-Pt)(N(Ru-Ru)), M(Pt), and M(Ru) are the coordination numbers from Pt(Ru) to Ru(Pt) and Pt (Ru) to Pt (Ru) and the molar ratios of Pt and Ru, respectively. This indicates that Pt and Ru were mixed with a completely random distribution. A high-entropy state of dispersion of Pt and Ru could be maintained by rapid quenching from a high temperature. It is concluded that a nonelectrochemical shift reaction on a randomly mixed Pt-Ru catalyst is important to enhance the efficiency of residential fuel cell systems under operation conditions.     

Promotion of the electrochemical activity of a bimetallic platinum-ruthenium catalyst by oxidation-induced segregation

An alloy catalyst of 15 wt % Pt(50)Ru(50)/C was prepared by the method of incipient wetness impregnation and activated by hydrogen reduction at 620 K. Physical characterization of the freshly reduced catalyst indicated that bimetallic crystallites, Pt rich in the shell and Ru rich in the core, were finely dispersed in a diameter of dPtRu approximately 2 nm on carbon support. The reduced catalyst was subsequently modified by oxidization in air. On increasing the temperature of oxidation (T(o)), atoms of Ru in the core were found segregated to the surface of bimetallic crystallites and oxidized to amorphous RuO(2). Crystalline RuO(2) (RucO(2)) was formed on extensive segregation at To > 520 K. Catalytic activity of the alloy catalyst for electro-oxidation of methanol was examined by cyclic voltammetry. Electrochemical activity of the Pt-Ru/C catalyst was found to be significantly enhanced by oxidation treatments. The enhancement was, therefore, attributed to the segregation of Ru and the formation of RucO(2). Extensive oxidation treatment at elevated temperatures of To > 600 K, however, caused the deactivation of the electroactivity. The deactivation should be the result of excessive oxidation of the carbon support.     

PtRu/氮掺杂碳电催化甲醇氧化及电解水析氢性能

将三聚氰胺、RuCl₃及炭黑以一定的比例分散于乙醇中,采用旋转蒸干及高温热处理合成了一种氮掺杂碳(NC)负载Ru的Ru/NC催化剂。采用硼氢化钠液相化学还原法合成了不同Pt、Ru负载量的PtRu/NC催化剂,并用于电催化甲醇氧化反应(MOR)及电催化分解水析氢反应(HER)。结果表明,合成的催化剂中Pt₁Ru/NC(Pt、Ru的实际负载量分别为1.14%、0.54%)表现出最优的MOR性能,质量活性达4.96 A·mg^-1_PtRu,且经10 000 s稳定性测试后质量活性保持在测试前的91.1%。同时,当电流密度为100mA·cm^-2时,Pt₁Ru/NC在 HER中表现出最低的过电位(103 mV)和最小的 Tafel斜率(15.29 mV·dec^-1)。通过 X射线衍射(XRD)、X射线光电子能谱(XPS)、透射电子显微镜(TEM)、扫描透射电子显微镜(STEM)、电感耦合等离子体发射光谱(ICP-OES)、STEM-能谱(STEM-EDS)技术表征了PtRu/NC双金属催化剂,其具有优异催化性能的原因如下：(1) PtRu双金属纳米颗粒高度分散于NC上;(2) Pt以纳米团簇或单原子形式负载于Ru上,后负载于NC,形成了Pt-Ru相分离结构;(3) Pt、Ru与N之间存在协同效应。     

Growth of PtRu Clusters on Ru(0001)‐Supported Monolayer Graphene Films

We report on results of a detailed scanning tunnelling microscopy study on the formation, size and size distribution, and internal structure of small bimetallic PtRu clusters on a graphene monolayer film supported on a Ru(0001) substrate. These clusters, with sizes around ～15 (Ru) or ～40 (Pt) atoms per cluster at the lowest coverage, are interesting model systems for the catalytic behaviour of small metal PtRu particles, for example for application in electrocatalytic oxidation reactions. The clusters were generated by sequential deposition of the two metals at room temperature. The data reveal a distinct influence of the deposition sequence on the cluster formation process, with Ru pre‐deposition followed by Pt deposition leading to predominantly bimetallic clusters, possibly with a core–shell‐type structure, while the reverse sequence results in co‐existent mono‐ and bimetallic clusters, where the latter are likely to intermix at the interface. The observations are related to the nucleation process of the respective metals on the templated surface, and the 2D growth behaviour of the two metals.     

Pt-Ru/GC电极对甲醇电催化氧化的研究

利用循环伏安法制备了Pt-Ru/GC电极并用于对甲醇的电催化氧化研究,考察了Pt、Ru原子比、沉积电位下限和沉积量对电极催化性能的影响,研究了电极催化性能的稳定性。结果表明Ru的加入对电极催化性能具有明显的改善作用,对甲醇的氧化电位范围明显变宽,氧化电流明显增大,电极的稳定性明显高于Pt/GC电极。在Pt、Ru原子比为1:1、沉积电位下限为-0.2V、沉积量为40r的条件下,Pt-Ru/GC电极对甲醇电催化氧化的性能最好。     

Pt-Ru/C催化剂在甲醇电氧化过程中的组成和结构变化

本文研究了Pt-Ru/C催化剂在甲醇电催化氧化过程中组成和结构的变化。结果表明:在扫描初期,Pt-Ru催化剂的表面处于富Ru状态,Pt-Ru催化剂显示出良好的协同效应,峰电位较低,峰电流密度也较小。随着扫描圈数的增加(1~35圈),催化剂表面Ru原子逐渐溶解,Pt-Ru协同效应减弱,峰电位逐渐增大;同时,随着Ru的溶解,催化剂表面Pt原子含量的增加,催化剂对甲醇氧化的峰电流密度逐渐增大。继续增加扫描圈数(36~80圈),催化剂表面Ru原子含量趋于稳定,但Pt原子发生表面重组,粒子粒径增大,从而导致催化剂对甲醇电氧化性能下降。     

Bifunctional electrocatalysis in pt-ru nanoparticle systems

Pt-Ru alloys are prominent electrocatalysts in fuel cell anodes as they feature a very high activity for the oxidation of reformate and methanol. The improved CO tolerance of these alloys has been discussed in relation to the so-called ligand and bifunctional mechanisms. Although these effects have been known for many years, they are still not completely understood. A new approach that bridges the gap between single crystals and practical catalysts is presented in this paper. Nanoparticulate model systems attached to an oxidized glassy carbon electrode were prepared by combining both ligand-stabilized and spontaneously deposited Pt and Ru nanoparticles. These electrodes showed very different voltammetric responses for CO and methanol oxidation. The cyclic voltammograms were deconvoluted into contributions attributed to Pt, Ru, and Pt-Ru contact regions to quantify the contribution of the latter to the bifunctional mechanism. Scanning transmission electron microscopy confirmed the proximity of Pt and Ru nanoparticles in the different samples.     

Electrocatalytic oxidation of ethylene glycol on Pt and Pt-Ru nanoparticles modified multi-walled carbon nanotubes

The synthesis and characterization of catalysts based on nanomaterials, supported on multi-walled carbon nanotubes (CNT) for ethylene glycol (EG) oxidation is investigated. Platinum (Pt) and platinum-ruthenium (Pt-Ru) nanoparticles are deposited on surface-oxidized multi-walled carbon nanotubes [Pt/CNT; Pt-Ru/CNT] by the aqueous solution reduction of the corresponding metal salts with glycerol. The electrocatalytic properties of the modified electrodes for oxidation of ethylene glycol in acidic solution have been studied by cyclic voltammetry (CV), and excellent activity is observed. This may be attributed to the small particle size of the metal nanoparticles, the efficacy of carbon nanotubes acting as good catalyst support and uniform dispersion of nanoparticles on CNT surfaces. The nature of the resulting nanoparticles decorated multiwalled carbon nanotubes are characterized by scanning electron microscopy (SEM) and transmission electron microscopic (TEM) analysis. The cyclic voltammetry response indicates that Pt-Ru/CNT catalyst displays a higher performance than Pt/CNT, which may be due to the efficiency of the nature of Ru species in Pt-Ru systems. The fabricated Pt and Pt-Ru nanoparticles decorated CNT electrodes shows better catalytic performance towards ethylene glycol oxidation than the corresponding nanoparticles decorated carbon electrodes, demonstrating that it is more promising for use in fuel cells.     

Nucleation and growth mechanism of Pd/Pt bimetallic clusters in sodium bis(2-ethylhexyl)sulfosuccinate (AOT) reverse micelles as studied by in situ X-ray absorption spectroscopy

We report in situ X-ray absorption spectroscopy (XAS) investigations on the formation of palladium-platinum (Pd/Pt) bimetallic clusters at the early stage within the water-in-oil microemulsion system of water/AOT/n-heptane. The reduction of palladium and platinum ions and the formation of corresponding clusters are monitored as a function of dosage of reducing agent, hydrazine (N(2)H(5)OH). Upon successive addition of the reducing agent, hydrazine (N(2)H(5)OH), five distinguishable steps are observed in the formation process of Pd/Pt clusters at the early stage. Both in situ X-ray absorption near-edge structure (XANES) and extended X-ray absorption fine structure (EXAFS) analysis for both the Pd K-edge and Pt L(III)-edge revealed the formation of Pd/Pt bimetallic clusters. A corresponding structural model is proposed for each step to provide a detailed insight into the nucleation and growth mechanism of Pd/Pt bimetallic clusters. We also discussed the atomic distribution of Pd and Pt atoms in Pd/Pt bimetallic clusters based on the calculated XAS structural parameters.     

Voltammetric surface dealloying of Pt bimetallic nanoparticles: an experimental and DFT computational analysis

Voltammetric dealloying of bimetallic platinum-copper (Pt-Cu) alloys has been shown to be an effective strategy to modify the surface electrocatalytic reactivity of Pt bimetallic nanoparticles (S. Koh and P. Strasser, J. Am. Chem. Soc., 2007, 129, 12624). Using cyclic voltammetry and structural XRD studies, we systematically characterize the Pt-Cu precursor compounds as well as the early stages of the selective Cu surface dissolution (dealloying) process for Pt(25)Cu(75), Pt(50)Cu(50), and Pt(75)Cu(25) alloy nanoparticles annealed at both low and high temperature. We also assess the impact of the synthesis conditions on the electrocatalytic reactivity for the oxygen reduction reaction (ORR). To gain atomistic insight into the observed voltammetric profiles, we compare our experimental results with periodic DFT calculations of trends in the thermodynamics of surface Cu dissolution potentials from highly stepped and kinked Pt(854) single crystal surfaces. The modeling suggests a dependence of the electrochemical Cu dissolution potentials on the detailed atomic environment (coordination number, nature of coordinating atoms) of the bimetallic Pt-Cu surfaces. The DFT-predicted shifts in electrochemical Cu dissolution potentials are shown to qualitatively account for the observed voltammetric profiles during Cu dealloying. Our study suggests that metal-specific energetics have to be taken into account to explain the detailed dealloying behavior of bimetallic surfaces.     

甲醇在欠电位沉积Ru修饰Pt电极上的催化氧化

采用欠电位沉积(upd)方法在Pt 表面沉积亚单层的Ru制备出upd-Ru/Pt 电极. 通过欠电位沉积前后电极在0.5 mol·L-1 H2SO4溶液中循环伏安图-152 - 128 mV(vs Ag/AgCl)电位范围内对氢区的数值积分确定Pt表面Ru 的覆盖度. 用电化学方法测试了甲醇在upd-Ru/Pt电极上的催化氧化, 并讨论分析了欠电位沉积电位和Ru的表面覆盖度对甲醇氧化的影响. 结果表明, Ru能够欠电位沉积到Pt表面. Pt表面欠电位沉积少量的Ru 即能大大促进甲醇的氧化.只要控制upd-Ru的沉积量, upd-Ru原子就能大大促进甲醇氧化而与沉积电位无关. Ru原子对甲醇氧化的促进作用与Ru和Pt是否形成合金无关, 而取决于Ru 在Pt表面的百分含量.