ansa-Zirconocene ester enolates: synthesis, structure, reaction with organo-lewis acids, and application to polymerization of methacrylates

The synthesis, structural characterization, and abstraction chemistry of ansa-zirconocene ester enolate complexes relevant to the isospecific polymerization of methacrylates are reported. Reactions of rac-(EBI)ZrMe(OTf) and rac-(EBI)Zr(OTf)(2) [EBI = C(2)H(4)(Ind)(2)] with 1 and 2 equiv of lithium isopropylisobutyrate in toluene produce the first examples of ansa-zirconocene mono- and diester enolate complexes: rac-(EBI)ZrMe[OC(O(i)Pr)=CMe(2)] (1) and rac-(EBI)Zr[OC(O(i)Pr)=CMe(2)](2) (2) in 89% and 50% isolated yields, respectively. The reaction of 1 with B(C(6)F(5))(3) was investigated in six different organic solvents; in THF at ambient temperature, this reaction cleanly produces the isolable cationic ansa-zirconocene ester enolate complex rac-(EBI)Zr(+)(THF)[OC(O(i)Pr)=CMe(2)][MeB(C(6)F(5))(3)](-) (3) in quantitative yield. The analogous reaction of 1 with Al(C(6)F(5))(3) in toluene, however, proceeds through a proposed novel, intramolecular proton transfer process in which propylene is eliminated from the isopropoxy group, subsequently producing a carboxylate-bridged tight ion pair rac-(EBI)Zr(+)(Me)OC((i)Pr)OAl(C(6)F(5))(3)(-) (4). In addition to standard spectroscopic and analytical characterizations for the isolated complexes 1-4, complexes 2 and 4 have also been structurally characterized by X-ray diffraction studies. Polymerization of methyl methacrylate (MMA) and n-butyl methacrylate (BMA) has been investigated using complexes 1, 3, and 4. Both the isolated cationic 3 and neutral 1 (the latter combined with B(C(6)F(5))(3) in situ) are highly active (10 min for quantitative MMA conversion) and highly isospecific ([mm] > 95% for PMMA; [mm] > 99% for PBMA) via enantiomorphic-site control, producing polymethacrylates with extremely narrow molecular weight distributions (M(w)/M(n) = 1.03). The aluminate complex 4, however, produces syndiotactic PMMA predominantly via chain-end control.     

Generation of cationic [Zr-[tert-butyl enolate]] reactive species: methyl abstraction versus hydride abstraction

Treatment of the neutral methyl-Zr-enolate [Cp(2)Zr(Me)[O(tBuO)C=CMe(2)]] (1) with one equivalent of B(C(6)F(5))(3) or [HNMe(2)Ph][B(C(6)F(5))(4)] as a methyl abstractor in THF at 0 degrees C leads to the selective formation of the free ion pair complex [Cp(2)Zr(THF)[O(tBuO)C=CMe(2)]](+) [anion](-) (2) (anion=MeB(C(6)F(5))(3) (-), B(C(6)F(5))(4) (-)), which is relevant to the controlled polymerization of methacrylates. Cation 2 rapidly decomposes at 20 degrees C in THF with release of one equivalent of isobutene to form the cationic Zr-carboxylate species [Cp(2)Zr(THF)(O(2)CiPr)](+) (3), through a proposed intramolecular proton transfer process from the tert-butoxy group to the enolate. The reaction of 1 with one equivalent of B(C(6)F(5))(3) or [HNMe(2)Ph][B(C(6)F(5))(4)] in CH(2)Cl(2) leads to the direct, rapid formation of the dimeric micro-isobutyrato-Zr dicationic species [[Cp(2)Zr[micro-(O(2)CiPr)]](2)](2+) (4), which gives 3 upon dissolution in THF. Contrastingly, when [Ph(3)C][B(C(6)F(5))(4)] is used to generate the cationic Zr-enolate species from 1 in CD(2)Cl(2), a 15:85 mixture of dicationic complexes 4 and [[Cp(2)Zr[micro-(O(2)C-C(Me)=CH(2))]](2)](2+)[B(C(6)F(5))(4)]]2-(5-[B(C(6)F(5))(4)](2)) is obtained quantitatively. The formation of 5 is proposed to arise from initial hydride abstraction from a methyl enolate group by Ph(3)C(+), as supported by the parallel production of Ph(3)CH, and subsequent elimination of methane and isobutene. In addition to standard spectroscopic and analytical characterizations for the isolated complexes 2-5, complexes 4 and 5 have also been structurally characterized by X-ray diffraction studies.     

Synthesis, structures, and reactivity of weakly coordinating anions with delocalized borate structure: the assessment of anion effects in metallocene polymerization catalysts.

The formation of adducts of tris(pentafluorophenyl)borane with strongly coordinating anions such as CN(-) and [M(CN)(4)](2)(-) (M = Ni, Pd) is a synthetically facile route to the bulky, very weakly coordinating anions [CN[B(C(6)F(5))(3)](2)](-) and [M[CNB(C(6)F(5))(3)](4)](2-) which are isolated as stable NHMe(2)Ph(+) and CPh(3)(+) salts. The crystal structures of [CPh(3)][CN[B(C(6)F(5))(3)](2)] (1), [CPh(3)][ClB(C(6)F(5))(3)] (2), [NHMe(2)Ph](2)[Ni[CNB(C(6)F(5))(3)](4)].2Me(2)CO (4b.2Me(2)CO), [CPh(3)](2)[Ni[CNB(C(6)F(5))(3)](4)].2CH(2)Cl(2) (4c.2CH(2)Cl(2)), and [CPh(3)](2)[Pd[CNB(C(6)F(5))(3)](4)].2CH(2)Cl(2) (5c.2CH(2)Cl(2)) are reported. The CN stretching frequencies in 4 and 5 are shifted by approximately 110 cm(-1) to higher wavenumbers compared to the parent tetracyano complexes in aqueous solution, although the M-C and C-N distances show no significant change on B(C(6)F(5))(3) coordination. Zirconocene dimethyl complexes L(2)ZrMe(2) [L(2) = Cp(2), SBI = rac-Me(2)Si(Ind)(2)] react with 1, 4c or 5c in benzene solution at 20 degrees C to give the salts of binuclear methyl-bridged cations, [(L(2)ZrMe)(2)(mu-Me)][CN[B(C(6)F(5))(3)](2)] and [(L(2)ZrMe)(2)(mu-Me)](2)[M[CNB(C(6)F(5))(3)](4)]. The reactivity of these species in solution was studied in comparison with the known [[(SBI)ZrMe](2)(mu-Me)][B(C(6)F(5))(4)]. While the latter reacts with excess [CPh(3)][B(C(6)F(5))(4)] in benzene to give the mononuclear ion pair [(SBI)ZrMe(+).B(C(6)F(5))(4)(-)] in a pseudo-first-order reaction, k = 3 x 10(-4) s(-1), [(L(2)ZrMe)(2)(mu-Me)][CN[B(C(6)F(5))(3)](2)] reacts to give a mixture of L(2)ZrMe(mu-Me)B(C(6)F(5))(3) and L(2)ZrMe(mu-NC)B(C(6)F(5))(3). Recrystallization of [Cp' '(2)Zr(mu-Me)(2)AlMe(2)][CN[B(C(6)F(5))(3)](2)] affords Cp' '(2)ZrMe(mu-NC)B(C(6)F(5))(3) 6, the X-ray structure of which is reported. The stability of [(L(2)ZrMe)(2)(mu-Me)](+)X(-) decreases in the order X = [B(C(6)F(5))(4)] > [M[CNB(C(6)F(5))(3)](4)] > [CN[B(C(6)F(5))(3)](2)] and increases strongly with the steric bulk of L(2) = Cp(2) < SBI. Activation of (SBI)ZrMe(2) by 1 in the presence of AlBu(i)(3) gives extremely active ethene polymerization catalysts. Polymerization studies at 1-7 bar monomer pressure suggest that these, and by implication most other highly active ethene polymerization catalysts, are strongly mass-transport limited. By contrast, monitoring propene polymerization activities with the systems (SBI)ZrMe(2)/1/AlBu(i)(3) and CGCTiMe(2)/1/AlBu(i)(3) at 20 degrees C as a function of catalyst concentration demonstrates that in these cases mass-transport limitation is absent up to [metal] approximately 2 x 10(-5) mol L(-1). Propene polymerization activities decrease in the order [CN[B(C(6)F(5))(3)](2)](-) > [B(C(6)F(5))(4)](-) > [M[CNB(C(6)F(5))(3)](4)](2-) > [MeB(C(6)F(5))(3)](-), with differences in activation barriers relative to [CN[B(C(6)F(5))(3)](2)](-) of DeltaDeltaG = 1.1 (B(C(6)F(5))(4)(-)), 4.1 (Ni[CNB(C(6)F(5))(3)](4)(2-)) and 10.7-12.8 kJ mol(-)(1) (MeB(C(6)F(5))(3)(-)). The data suggest that even in the case of very bulky anions with delocalized negative charge the displacement of the anion by the monomer must be involved in the rate-limiting step.     

Reactivity of the bis(pentafluorophenyl)boranes ClB(C6F5)2 and [HB(C6F5)2]n towards late transition metal reagents

The reactivities of the highly electrophilic boranes ClB(C(6)F(5))(2) (1) and [HB(C(6)F(5))(2)](n) (2) towards a range of organometallic reagents featuring metals from Groups 7-10 have been investigated. Salt elimination chemistry is observed 1 between and the nucleophilic anions eta(5)-C(5)R(5))Fe(CO)(2)](-)(R = H or Me) and [Mn(CO)(5)](-), leading to the generation of the novel boryl complexes (eta(5)-C(5)R(5))Fe(CO)(2)B(C(6)F(5))(2)[R = H (3) or Me (4)] and (OC)(5)MnB(C(6)F(5))(2) (5). Such systems are designed to probe the extent to which the strongly sigma-donor boryl ligand can also act as a pi-acceptor; a variety of spectroscopic, structural and computational probes imply that even with such strongly electron withdrawing boryl substituents, the pi component of the metal-boron linkage is a relatively minor one. Similar reactivity is observed towards the hydridomanganese anion [(eta(5)-C(5)H(4)Me)Mn(CO)(2)H](-), generating a thermally labile product identified spectroscopically as (eta(5)-C(5)H(4)Me)Mn(CO)(2)(H)B(C(6)F(5))(2) (6). Boranes 1 and 2 display different patterns of reactivity towards low-valent platinum and rhodium complexes than those demonstrated previously for less electrophilic reagents. Thus, reaction of 1 with (Ph(3)P)(2)Pt(H(2)C=CH(2)) ultimately generates EtB(C(6)F(5))(2) (10) as the major boron-containing product, together with cis-(Ph(3)P)(2)PtCl(2) and trans-(Ph(3)P)(2)Pt(C(6)F(5))Cl (9). The cationic platinum hydride [(Ph(3)P)(3)PtH](+) is identified as an intermediate in the reaction pathway. Reaction of with [(Ph(3)P)(2)Rh(mu-Cl)](2), in toluene on the other hand, appears to proceed via ligand abstraction with both Ph(3)P.HB(C(6)F(5))(2) (11) and the arene rhodium(I) cation [(Ph(3)P)(2)Rh(eta(6)-C(6)H(5)Me)](+) (14) ultimately being formed.     

Synthesis, characterization, and application of two Al(OR(F))3 Lewis superacids

We report herein the synthesis and full characterization of the donor-free Lewis superacids Al(OR(F))(3) with OR(F) = OC(CF(3))(3) (1) and OC(C(5)F(10))C(6)F(5) (2), the stabilization of 1 as adducts with the very weak Lewis bases PhF, 1,2-F(2)C(6)H(4), and SO(2), as well as the internal C-F activation pathway of 1 leading to Al(2)(F)(OR(F))(5) (4) and trimeric [FAl(OR(F))(2)](3) (5, OR(F) = OC(CF(3))(3)). Insights have been gained from NMR studies, single-crystal structure determinations, and DFT calculations. The usefulness of these Lewis acids for halide abstractions has been demonstrated by reactions with trityl chloride (NMR; crystal structures). The trityl salts allow the introduction of new, heteroleptic weakly coordinating [Cl-Al(OR(F))(3)](-) anions, for example, by hydride or alkyl abstraction reactions.     

Activation of

Reversible C(6)F(5) transfer takes place between the boron centers in the anion formed by methide abstraction from [MeZr{N(SiMe(3))(2)}(3)] or [Cp(2)ZrMe(2)] (L(n)M-CH(3) in the reaction scheme) by the perfluorinated diborane 1. The solution chemistry of the metallocenium ion pairs formed from 1 and [Cp(2)ZrMe(2)] is correlated with the observed ethylene polymerization behavior of 1 in comparison to the monoborane B(C(6)F(5))(3), the related diborane 1,2-C(6)H(4)[B(C(6)F(5))(2)](2), and the 9,10-diboraanthracene compound 9,10-(C(6)F(5))(2)C(12)B(2)F(8).     

Synthesis,structural characterization,and reactions of cyclic organohydroborate half-zirconocene compounds

Cyclic organohydroborate complexes of zirconium monocyclopentadienyl CpZr[(mu-H)(2)BC(5)H(10)](3), 1, and CpZr[(mu-H)(2)BC(8)H(14)](3), 2, were prepared from the reaction of CpZrCl(3) with 3 mol of K[H(2)BC(5)H(10)] and K[H(2)BC(8)H(10)], respectively, in diethyl ether. Compounds 1 and 2 react with the hydride ion abstracting agent B(C(6)F(5))(3) to form the same salt [CpZr(OEt)(OEt(2))(mu-OEt)](2)[HB(C(6)F(5))(3)](2), 5. The complexes CpZr(Cl)[(mu-H)(2)BC(8)H(14)](2), 3, and CpZr(Cl)[(mu-H)(2)BC(8)H(14)](2) [where Cp = C(5)(CH(3))(5)], 4, were prepared from the reaction of CpZrCl(3) and CpZrCl(3) with K[H(2)BC(8)H(10)] in 1:2 molar ratios, respectively. An alpha-hydrogen of a BC(8)H(14) unit forms an agostic interaction with Zr in compound 3 but not in 4. All of the compounds were characterized by single-crystal X-ray diffraction analysis.     

Synthesis and reactivity of bridging and terminal hydrosulfido palladium and platinum complexes. Crystal structures of [NBu4]2[(Pt(c6F5)2(mu-SH)]2], [Pt(C6F5)2(PPh3)[S(H)AgPPh3]], and [Pt(C6F5)2(PPh3)[S(AuPPh3)2]

The reactions of the hydroxo complexes [M(2)R(4)(mu-OH)(2)](2)(-) (M = Pd, R = C(6)F(5), C(6)Cl(5); M = Pt, R = C(6)F(5)), [[PdR(PPh(3))(mu-OH)](2)] (R = C(6)F(5), C(6)Cl(5)), and [[Pt(C(6)F(5))(2)](2)(mu-OH)(mu-pz)](2-) (pz = pyrazolate) with H(2)S yield the corresponding hydrosulfido complexes [M(2)(C(6)F(5))(4)(mu-SH)(2)](2-), [[PdR(PPh(3))(mu-SH)](2)], and [[Pt(C(6)F(5))(2)](2)(mu-SH)(mu-pz)](2-), respectively. The monomeric hydrosulfido complexes [M(C(6)F(5))(2)(SH)(PPh(3))](-) (M = Pd, Pt) have been prepared by reactions of the corresponding binuclear hydrosulfido complexes [M(2)(C(6)F(5))(4)(mu-SH)(2)](2-) with PPh(3) in the molar ratio 1:2, and they can be used as metalloligands toward Ag(PPh(3))(+) to form the heterodinuclear complex [(C(6)F(5))(2)(PPh(3))[S(H)AgPPh(3)]], and toward Au(PPh(3))(+) yielding the heterotrinuclear complexes [M(C(6)F(5))(2)(PPh(3))[S(AuPPh(3))(2)]]. The crystal structures of [NBu(4)](2)[[Pt(C(6)F(5))(2)(mu-SH)](2)], [Pt(C(6)F(5))(2)(PPh(3))[S(H)AgPPh(3)]], and [Pt(C(6)F(5))(2)(PPh(3))[S(AuPPh(3))(2)]] have been established by X-ray diffraction and show no short metal-metal interactions between the metallic centers.     

Condensation reactions of monomeric hydroxo palladium complexes with active methyl and methylene compounds

Heating a suspension of the monomeric hydroxo palladium complex of the type [Pd(N-N)(C(6)F(5))(OH)](N-N = bipy, Me(2)bipy, phen or tmeda) in methylketone (acetone or methylisobutylketone) under reflux affords the corresponding ketonyl palladium complex [Pd(N-N)(C(6)F(5))(CH(2)COR)]. On the other hand, the reaction of the hydroxo palladium complexes [Pd(N-N)(C(6)F(5))(OH)](N-N = bipy, phen or tmeda) with diethylmalonate or malononitrile yields the C-bound enolate palladium complexes [Pd(N-N)(CHX(2))(C(6)F(5))](X = CO(2)Et or CN), and the reaction of [Pd(N-N)(C(6)F(5))(OH)](N-N = bipy or phen) with nitromethane gives the nitromethyl palladium complexes [Pd(N-N)(CH(2)NO(2))(C(6)F(5))]. [Pd(tmeda)(C(6)F(5))(OH)] catalyses the cyclotrimerization of malononitrile. The crystal structures of [Pd(bipy)(C(6)F(5))(CH(2)COMe)].1/2Me(2)CO, [Pd(tmeda)(C(6)F(5))[CH(CO(2)Et)(2)]], [Pd(tmeda)(C(6)F(5))[CH(CN)(2)]] and [Pd(tmeda)(C(6)F(5))(CH(2)NO(2))].1/2CH(2)Cl(2) have been established by X-ray diffraction.     

New insights into the polymerization of methyl methacrylate initiated by rare-earth borohydride complexes: a combined experimental and computational approach

Polymerization of methyl methacrylate (MMA) initiated by the rare-earth borohydride complexes [Ln(BH(4))(3)(thf)(3)] (Ln=Nd, Sm) or [Sm(BH(4))(Cp*)(2)(thf)] (Cp*=eta-C(5)Me(5)) proceeds at ambient temperature to give rather syndiotactic poly(methyl methacrylate) (PMMA) with molar masses M(n) higher than expected and quite broad molar mass distributions, which is consistent with a poor initiation efficiency. The polymerization of MMA was investigated by performing density functional theory (DFT) calculations on an eta-C(5)H(5) model metallocene and showed that in the reaction of [Eu(BH(4))(Cp)(2)] with MMA the borate [Eu(Cp)(2){(OBH(3))(OMe)C=C(Me)(2)}] (e-2) complex, which forms via the enolate [Eu(Cp)(2){O(OMe)C=C(Me)(2)}] (e), is calculated to be exergonic and is the most likely of all of the possible products. This product is favored because the reaction that leads to the formation of carboxylate [Eu(Cp)(2){OOC-C(Me)(=CH(2))}] (f) is thermodynamically favorable, but kinetically disfavored, and both of the potential products from a Markovnikov [Eu(Cp)(2){O(OMe)C-CH(Me)(CH(2)BH(3))}] (g) or anti-Markovnikov [Eu(Cp)(2){O(OMe)C-C(Me(2))(BH(3))}] (h) hydroboration reaction are also kinetically inaccessible. Similar computational results were obtained for the reaction of [Eu(BH(4))(3)] and MMA with all of the products showing extra stabilization. The DFT calculations performed by using [Eu(Cp)(2)(H)] to model the mechanism previously reported for the polymerization of MMA initiated by [Sm(Cp*)(2)(H)](2) confirmed the favorable exergonic formation of the intermediate [Eu(Cp)(2){O(OMe)C=C(Me)(2)}] (e') as the kinetic product, this enolate species ultimately leads to the formation of PMMA as experimentally observed. Replacing H by BH(4) thus prevents the 1,4-addition of the [Eu(BH(4))(Cp)(2)] borohydride ligand to the first incoming MMA molecule and instead favors the formation of the borate complex e-2. This intermediate is the somewhat active species in the polymerization of MMA initiated by the borohydride precursors [Ln(BH(4))(3)(thf)(3)] or [Sm(BH(4))(Cp*)(2)(thf)].     

Preparation and characterization of the argentates: [Ag[P(CF(3))(2)](2)](-), [Ag[(micro-P(CF(3))(2))M(CO)(5)](2)](-) (M = Cr, W), and [Ag[(micro-P(C(6)F(5))(2))W(CO)(5)](2)](-): X-ray crystal structure of [K(18-crown-6)][Ag[(micro-P(CF(3))(2))Cr(CO)(5)](2)

The first example of a mononuclear diphosphanidoargentate, bis[bis(trifluoromethyl)phosphanido]argentate, [Ag[P(CF(3))(2)](2)](-), is obtained via the reaction of HP(CF(3))(2) with [Ag(CN)(2)](-) and isolated as its [K(18-crown-6)] salt. When the cyclic phosphane (PCF(3))(4) is reacted with a slight excess of [K(18-crown-6)][Ag[P(CF(3))(2)](2)], selective insertion of one PCF(3) unit into each silver phosphorus bond is observed, which on the basis of NMR spectroscopic evidence suggests the [Ag[P(CF(3))P(CF(3))(2)](2)](-) ion. On treatment of the phosphane complexes [M(CO)(5)PH(CF(3))(2)] (M = Cr, W) with [K(18-crown-6)][Ag(CN)(2)], the analogous trinuclear argentates, [Ag[(micro-P(CF(3))(2))M(CO)(5)](2)](-), are formed. The chromium compound [K(18-crown-6)][Ag[(micro-P(CF(3))(2))Cr(CO)(5)](2)] crystallizes in a noncentrosymmetric space group Fdd2 (No. 43), a = 2970.2(6) pm, b = 1584.5(3) pm, c = 1787.0(4), V = 8.410(3) nm(3), Z = 8. The C(2) symmetric anion, [Ag[(micro-P(CF(3))(2))Cr(CO)(5)](2)](-), shows a nearly linear arrangement of the P-Ag-P unit. Although the bis(pentafluorophenyl)phosphanido compound [Ag[P(C(6)F(5))(2)](2)](-) has not been obtained so far, the synthesis of its trinuclear counterpart, [K(18-crown-6)][Ag[(micro-P(C(6)F(5))(2))W(CO)(5)](2)], was successful.     

Asymmetric Diels-Alder and Ficini reactions with alkylidene β-ketoesters catalyzed by chiral ruthenium PNNP complexes: mechanistic insight

Hydride abstraction from the β-position of the enolato ligand of the previously reported complex [Ru(3a-H)(PNNP)]PF(6) (5a; 3a-H is the enolate of 2-tert-butoxycarbonylcyclopentanone) with (Ph(3)C)PF(6) gives the dicationic complex [Ru(6a)(PNNP)](2+) (7a) as a single diastereoisomer, which contains the unsaturated β-ketoester 2-tert-butoxycarbonyl-2-cyclopenten-1-one (6a) as a chelating ligand. The methyl analogue 2-methoxycarbonylcyclopentanone (3b) gives [Ru(3b-H)(PNNP)]PF(6) as a mixture of noninterconverting diastereoisomers (ester group of 3b trans to P, 5b; or to N, 5c), which were separated by column chromatography. Hydride abstraction from 5b (or 5c) yields diastereomerically pure [Ru(6b)(PNNP)](2+) (7b or 7c). Complexes 7b and 7c do not interconvert at room temperature in CD(2)Cl(2) and form opposite enantiomers of the Diels-Alder adduct upon reaction with Dane's diene (1 equiv). X-ray studies of 7a, 5b, and 5c give insight into the origin of enantioselection and the sense of asymmetric induction in the previously reported asymmetric Diels-Alder and Ficini cycloaddition reactions with 2,3-disubstituted butadienes and ynamides, respectively. Stoichiometric reactions (substrate coordination, cycloaddition, and product displacement) between [Ru(OEt(2))(2)(PNNP)](2+) (2), 6b (or 6a), and Dane's diene (15, to give estrone derivatives) or N-benzyl-N-(cyclohexylethynyl)-4-methylbenzenesulfonamide (17, to give cyclobutenamides) suggest that product displacement from the catalyst is turnover limiting.     

Chiral fluorous dialkoxy-diamino zirconium complexes: synthesis and use in stereospecific polymerization of 1-hexene

New catalysts for the isospecific polymerization of 1-hexene based on cationic zirconium complexes incorporating the tetradentate fluorous dialkoxy-diamino ligands [OC(CF(3))(2)CH(2)N(Me)(CH(2))(2)N(Me)CH(2)C(CF(3))(2)O](2-) [(ON(2)NO)(2-)] and [OC(CF(3))(2)CH(2)N(Me)(1R,2R-C(6)H(10))N(Me)CH(2)C(CF(3))(2)O](2-) [(ON(Cy)NO)(2-)] have been developed. The chiral fluorous diamino-diol [(ON(Cy)NO)H(2), 2] was prepared by ring-opening of the fluorinated oxirane (CF(3))(2)COCH(2) with (R,R)-N,N'-dimethyl-1,2-cyclohexanediamine. Proligand 2 reacts cleanly with [Zr(CH(2)Ph)(4)] and [Ti(OiPr)(4)] precursors to give the corresponding dialkoxy complexes [Zr(CH(2)Ph)(2)(ON(Cy)NO)] (3) and [Ti(OiPr)(2)(ON(Cy)NO)] (4), respectively. An X-ray diffraction study revealed that 3 crystallizes as a 1:1 mixture of two diastereomers (Lambda-3 and Delta-3), both of which adopt a distorted octahedral structure with trans-O, cis-N, and cis-CH(2)Ph ligands. The two diastereomers Lambda-3 and Delta-3 adopt a C(2)-symmetric structure in toluene solution, as established by NMR spectroscopy. Cationic complexes [Zr(CH(2)Ph)(ON(2)NO)(THF)(n)](+) (n=0, anion=[B(C(6)F(5))(4)](-), 5; n=1, anion=[PhCH(2)B(C(6)F(5))(3)](-), 6) and [Zr(CH(2)Ph)(ON(Cy)NO)(THF)](+)[PhCH(2)B(C(6)F(5))(3)](-) (7) were generated from the neutral parent precursors [Zr(CH(2)Ph)(2)(ON(2)NO)] (H) and [Zr(CH(2)Ph)(2)(ON(Cy)NO)] (3), and their possible structures were determined on the basis of (1)H, (19)F, and (13)C NMR spectroscopy and DFT methods. The neutral zirconium complexes H and 3 (Lambda-3/Delta-3 mixture), when activated with B(C(6)F(5))(3) or [Ph(3)C](+)[B(C(6)F(5))(4)](-), catalyze the polymerization of 1-hexene with overall activities of up to 4500 kg PH mol Zr(-1) h(-1), to yield isotactic-enriched (up to 74 % mmmm) polymers with low-to-moderate molecular weights (M(w)=4800-47 200) and monodisperse molecular-weight distributions (M(w)/M(n)=1.17-1.79).     

Studies on the mechanism of B(C(6)F(5))(3)-catalyzed hydrosilation of carbonyl functions

The strong organoborane Lewis acid B(C(6)F(5))(3) catalyzes the hydrosilation (using R(3)SiH) of aromatic and aliphatic carbonyl functions at convenient rates with loadings of 1-4%. For aldehydes and ketones, the product silyl ethers are isolated in 75-96% yield; for esters, the aldehydes produced upon workup of the silyl acetal products can be obtained in 45-70% yield. Extensive mechanistic studies point to an unusual silane activation mechanism rather than one involving borane activation of the carbonyl function. Quantitative kinetic studies show that the least basic substrates are hydrosilated at the fastest rates; furthermore, increased concentrations of substrate have an inhibitory effect on the observed reaction rate. Paradoxically, the most basic substrates are reduced selectively, albeit at a slower rate, in competition experiments. The borane thus must dissociate from the carbonyl to activate the silane via hydride abstraction; the incipient silylium species then coordinates the most basic function, which is selectively reduced by [HB(C(6)F(5))(3)](-). In addition to the kinetic data, this mechanistic proposal is supported by a kinetic isotope effect of 1.4(5) for the hydrosilation of acetophenone, the observation that B(C(6)F(5))(3) catalyzes H/D and H/H scrambling in silanes in the absence of substrate, computational investigations, the synthesis of models for proposed intermediates, and other isotope labeling and crossover experiments.     

Reactions of Zn bis-ferrocenyl-β-diketiminates with [Ph3C][B(C6F5)4

The ZnMe complexes of bis-ferrocenyl-β-diketiminate ligands are prepared and the reactions with [Ph(3)C][B(C(6)F(5))(4)] are found to yield the salts [H(Ph(3)C)C(MeC(N(C(5)H(4))FeCp)(2)ZnMe] [B(C(6)F(5))(4)] and [CH(2)=C(MeC(N(C(5)H(4))FeCp)(2)ZnMe][B(C(6)F(5))(4)], derived from electrophilic substitution and hydride abstraction.     

Polyfluorinated Tris(pyrazolyl)borates. Syntheses and Spectroscopic and Structural Characterization of Group 1 and Group 11 Metal Complexes of [HB(3,5-(CF(3))(2)Pz)(3)](-) and [HB(3-(CF(3))Pz)(3)](-)

The fluorinated tris(pyrazolyl)borate ligands [HB(3,5-(CF(3))(2)Pz)(3)](-) and [HB(3-(CF(3))Pz)(3)](-) (where Pz = pyrazolyl) have been synthesized as their sodium salts from the corresponding pyrazoles and NaBH(4) in high yield. These sodium complexes and the related [HB(3,5-(CF(3))(2)Pz)(3)]K(DMAC) were used as ligand transfer agents in the preparation of the copper and silver complexes [HB(3,5-(CF(3))(2)Pz)(3)]Cu(DMAC), [HB(3,5-(CF(3))(2)Pz)(3)]CuPPh(3), [HB(3,5-(CF(3))(2)Pz)(3)]AgPPh(3), and [HB(3-(CF(3))Pz)(3)]AgPPh(3). Metal complexes of the fluorinated [HB(3,5-(CF(3))(2)Pz)(3)](-) ligand have highly electrophilic metal sites relative to their hydrocarbon analogs. This is evident from the formation of stable adducts with neutral oxygen donors such as H(2)O, dimethylacetamide, or thf. Furthermore, the metal compounds derived from fluorinated ligands show fairly long-range coupling between fluorines of the trifluoromethyl groups and the hydrogen, silver, or phosphorus. The solid state structures show that the fluorines are in close proximity to these nuclei, thus suggesting a possible through-space coupling mechanism. Crystal structures of the sodium adducts exhibit significant metal-fluorine interactions. The treatment of [HB(3,5-(CF(3))(2)Pz)(3)]Na(H(2)O) with Et(4)NBr led to [Et(4)N][HB(3,5-(CF(3))(2)Pz)(3)], which contains a well-separated [Et(4)N](+) cation and the [HB(3,5-(CF(3))(2)Pz)(3)](-) anion in the solid state. Crystal data with Mo Kalpha (lambda = 0.710 73 ?) at 193 K: [HB(3,5-(CF(3))(2)Pz)(3)]Na(H(2)O), C(15)H(6)BF(18)N(6)NaO, a = 7.992(2) ?, b = 15.049(2) ?, c = 9.934(2) ?, beta = 101.16(2) degrees, monoclinic, P2(1)/m, Z = 2; [{HB(3-(CF(3))Pz)(3)}Na(thf)](2), C(32)H(30)B(2)F(18)N(12)Na(2)O(2), a = 9.063(3) ?, b = 10.183(2) ?, c = 12.129(2) ?, alpha = 94.61(1) degrees, beta = 101.16(2) degrees, gamma = 95.66(2) degrees, triclinic, &Pmacr;1, Z = 1; [HB(3,5-(CF(3))(2)Pz)(3)]Cu(DMAC), C(19)H(13)BCuF(18)N(7)O, a = 15.124(4) ?, b = 8.833(2) ?, c = 21.637(6) ?, beta = 105.291(14) degrees, monoclinic, P2(1)/n, Z = 4; [HB(3,5-(CF(3))(2)Pz)(3)]CuPPh(3), C(33)H(19)BCuF(18)N(6)P, a = 9.1671(8) ?, b = 14.908(2) ?, c = 26.764(3) ?, beta = 94.891(1) degrees, monoclinic, P2(1)/c, Z = 4; [HB(3,5-(CF(3))(2)Pz)(3)]AgPPh(3).0.5C(6)H(14), C(36)H(26)AgBF(18)N(6)P, a = 13.929(2) ?, b = 16.498(2) ?, c = 18.752(2) ?, beta = 111.439(6) degrees, monoclinic, P2(1)/c, Z = 4; [Et(4)N][HB(3,5-(CF(3))(2)Pz)(3)], C(23)H(24)BF(18)N(7), a = 10.155(2) ?, b = 18.580(4) ?, c = 16.875(5) ?, beta = 99.01(2) degrees, monoclinic, P2(1)/n, Z = 4.     

Electrochemical preparation of the bis(ruthenocenium) dication

The electrochemical oxidation of ruthenocene (1) in CH(2)Cl(2)/[NBu(4)]A, where A = [B(C(6)F(5))(4)](-) or [B(C(6)H(3)(CF(3))(2))(4)](-), gives the dimeric dication [(RuCp(2))(2)](2+), 2(2+), in equilibrium with the 17-electron ruthenocenium ion 1(+). At room temperature the rapid equilibrium accounts for the quasi-Nernstian cyclic voltammetry (CV) behavior (E(1/2) = 0.41 V vs FeCp(2), A = [B(C(6)F(5))(4)](-)). Direct electrochemical evidence for 2(2+) is seen by CV and by bulk electrolysis at 243 K. The bis(ruthenocenium) dication undergoes a highly irreversible two-electron cathodic reaction at E(pc) ca. 0 V. Anodic electrolysis of 1 at 243 K using [B(C(6)H(3)(CF(3))(2))(4)](-) as the supporting electrolyte, followed by cathodic electrolysis of 2(2+), regenerates half of the original 1. Precipitation of 2(2+) occurs when the supporting electrolyte is [B(C(6)F(5))(4)](-), allowing facile isolation of [(RuCp(2))(2)][B(C(6)F(5))(4)](2). A second, unidentified, anodic product also reduces to give back ruthenocene. Digital simulations of the CV curves of 1 at 243 K give a dimerization equilibrium constant of 9 x 10(4) M(-1) for K(eq) = [(RuCp(2))(2)(2+)]/2 [RuCp(2)](+) in CH(2)Cl(2)/0.1 M [NBu(4)][B(C(6)F(5))(4)].     

Synthesis and structure of amido- and imido(pentafluorophenyl)borane zirconocene and hafnocene complexes: N-H and B-H activation

Treatment of Me(2)S·B(C(6)F(5))(n) H(3-n) (n=1 or 2) with ammonia yields the corresponding adducts. H(3)N·B(C(6)F(5))H(2) dimerises in the solid state through N-H···H-B dihydrogen interactions. The adducts can be deprotonated to give lithium amidoboranes Li[NH(2)B(C(6)F(5))(n)H(3-n)]. Reaction of the n=2 reagent with [Cp(2)ZrCl(2)] leads to disubstitution, but [Cp(2)Zr{NH(2)B(C(6)F(5))(2)H}(2)] is in equilibrium with the product of β-hydride elimination [Cp(2)Zr(H){NH(2)B(C(6)F(5))(2)H}], which proves to be the major isolated solid. The analogous reaction with [Cp(2)HfCl(2)] gives a mixture of [Cp(2)Hf{NH(2)B(C(6)F(5))(2)H}(2)] and the N-H activation product [Cp(2)Hf{NHB(C(6)F(5 )(2)H}]. [Cp(2)Zr{NH(2)B(C(6)F(5))(2)H}(2)]·PhMe and [Cp(2)Hf{NH(2)B(C(6)F(5))(2)H}(2)]·4(thf) exhibit β-B-agostic chelate bonding of one of the two amidoborane ligands in the solid state. The agostic hydride is invariably coordinated to the outside of the metallocene wedge. Exceptionally, [Cp(2)Hf{NH(2)B(C(6)F(5))(2)H}(2)]?PhMe has a structure in which the two amidoborane ligands adopt an intermediate coordination mode, in which neither is definitively agostic. [Cp(2)Hf{NHB(C(6)F(5))(2)H}] has a formally dianionic imidoborane ligand chelating through an agostic interaction, but the bond-length distribution suggests a contribution from a zwitterionic amidoborane resonance structure. Treatment of the zwitterions [Cp(2)MMe(μ-Me)B(C(6)F(5))(3)] (M=Zr, Hf) with Li[NH(2)B(C(6)F(5))(n)H(3-n)] (n=2) results in [Cp(2) MMe{NH(2)B(C(6)F(5))(2)H}] complexes, for which the spectroscopic data, particularly (1)J(B,H), again suggest β-B-agostic interactions. The reactions proceed similarly for the structurally encumbered [Cp'(2)ZrMe(μ-Me)B(C(6)F(5))(3)] precursor (Cp'=1,3-C(5)H(3)(SiMe(3))(2) , n=1 or 2) to give [Cp'(2)ZrMe{NH(2)B(C(6)F(5))(n)H(3-n)}], both of which have been structurally characterised and show chelating, agostic amidoborane coordination. In contrast, the analogous hafnium chemistry leads to the recovery of [Cp'(2)HfMe(2)] and the formation of Li[HB(C(6)F(5))(3)] through hydride abstraction.     

Rearrangement reactions of the transient lewis acids (CF(3))(3)B and (CF(3))(3)BCF(2): an experimental and theoretical study

Short-lived (CF(3))(3)B and (CF(3))(3)BCF(2) are generated as intermediates by thermal dissociation of (CF(3))(3)BCO and F(-) abstraction from the weak coordinating anion [B(CF(3))(4)](-), respectively. Both Lewis acids cannot be detected because of their instability with respect to rearrangement reactions at the B-C-F moiety. A cascade of 1,2-fluorine shifts to boron followed by perfluoroalkyl group migrations and also difluorocarbene transfer reactions occur. In the gas phase, (CF(3))(3)B rearranges to a mixture of linear perfluoroalkyldifluoroboranes C(n)()F(2)(n)()(+1)BF(2) (n = 2-7), while the respective reactions of (CF(3))(3)BCF(2) result in a mixture of linear (n = 2-4) and branched monoperfluoroalkyldifluoroboranes, e.g., (C(2)F(5))(CF(3))FCBF(2). For comparison, the reactions of [CF(3)BF(3)](-) and [C(2)F(5)BF(3)](-) with AsF(5) are studied, and the products in the case of [CF(3)BF(3)](-) are BF(3) and C(2)F(5)BF(2) whereas in the case of [C(2)F(5)BF(3)](-), C(2)F(5)BF(2) is the sole product. In contrast to reports in the literature, it is found that CF(3)BF(2) is too unstable at room temperature to be detected. The decomposition of (CF(3))(3)BCO in anhydrous HF leads to a mixture of the new conjugate Br?nsted-Lewis acids [H(2)F][(CF(3))(3)BF] and [H(2)F][C(2)F(5)BF(3)]. All reactions are modeled by density functional calculations. The energy barriers of the transition states are low in agreement with the experimental results that (CF(3))(3)B and (CF(3))(3)BCF(2) are short-lived intermediates. Since CF(2) complexes are key intermediates in the rearrangement reactions of (CF(3))(3)B and (CF(3))(3)BCF(2), CF(2) affinities of some perfluoroalkylfluoroboranes are presented. CF(2) affinities are compared to CO and F(-) affinities of selected boranes showing a trend in Lewis acidity, and its influence on the stability of the complexes is discussed. Fluoride ion affinities are calculated for a variety of different fluoroboranes, including perfluorocarboranes, and compared to those of the title compounds.     

Solid-state NMR spectroscopic study of coordination compounds of XeF(2) with metal cations and the crystal structure of [Ba(XeF(2))(5)][AsF(6)](2)

The coordination compounds [Mg(XeF(2))(2)][AsF(6)](2), [Mg(XeF(2))(4)][AsF(6)](2), [Ca(XeF(2))(2.5)][AsF(6)](2), [Ba(XeF(2))(3)][AsF(6)](2), and [Ba(XeF(2))(5)][AsF(60](2) were characterized by solid-state (19)F and (129)Xe magic-angle spinning NMR spectroscopy. The (19)F and (129)Xe NMR data of [Mg(XeF(2))(2)][AsF(6)](2), [Mg(XeF(2)(4)][AsF(6)](2), and [Ca(XeF(2))(2.5)][AsF(6)](2) were correlated with the previously determined crystal structures. The isotropic (19)F chemical shifts and (1)J((129)Xe-(19)F) coupling constants were used to distinguish the terminal and bridging coordination modes of XeF(2). Chemical-shift and coupling-constant calculations for [Mg(XeF(2))(4)][AsF(6)](2) confirmed the assignment of terminal and bridging chemical-shift and coupling-constant ranges. The NMR spectroscopic data of [Ba(XeF(2))(3)][AsF(6)](2) and [Ba(XeF(2))(5)][AsF(6)](2) indicate the absence of any terminal XeF(2) ligands, which was verified for [Ba(XeF(2))(5)][AsF(6)](2) by its X-ray crystal structure. The adduct [Ba(XeF(2))(5)][AsF(6)](2) crystallizes in the space group Fmmm, with a = 11.6604(14) Angstrom, b = 13.658(2) Angstrom, c = 13.7802(17) Angstrom, V = 2194.5(5) Angstrom(3) at -73 degrees C, Z = 4, and R = 0.0350 and contains two crystallographically independent bridging XeF(2) molecules and one nonligating XeF(2) molecule. The AsF(6-) anions in [Mg(XeF(2))(4)][AsF(6)](2), [Ca(XeF(2))(2.5)][AsF(6)](2), [Ba(XeF(2))(3)][AsF(6)](2), and [Ba(XeF(2))(5)][AsF(6)](2) were shown to be fluxional with the fluorines-on-arsenic being equivalent on the NMR time scale, emulating perfectly octahedral anion symmetry.