Aqueous-processed insulating polymer/nanocrystal solar cells with effective suppression of the leakage current and carrier recombination

As one of the most environmentally friendly photovoltaic(PV) conversion equipments,aqueousprocessed CdTe nanocrystal solar cells(NC SCs) have attracted great interest in recent years because of their excellent properties such as high charge-carrier mobility and broad absorption.However,two issues including interfacial recombination and leakage current seriously restrict their performance.In this paper,insulating polymer poly(vinyl pyrrolidone)(PVP) is introduced into CdTe NC SCs to solve the problems.The experimental results of transmission electron microscopy(TEM),atomic force micro scopy(AFM) and dark current measurements,etc.,demonstrate the leakage current is effectively suppressed by introducing PVP.Through further designing device structure,the reduction of interfacial recombination after introducing PVP is confirmed.By strategically taking the advantages of PVP properties(e.g.,water solubility and thermostability),the power conversion efficiency of the devices with PVP is enhanced by almost 37% compared to pure CdTe devices.This work demonstrates an effective and low-cost method to fabricate NC SCs via aqueous route.Moreover,it also proves that appropriate content of insulating polymer is of beneficial in promoting the PV performance.     

Asymmetric leakage in (Ba,Sr)TiO3 nanoparticle/parylene‐C composite capacitors

Nanoparticle polymer composite capacitors have been examined for some time as a route to high performance, printable capacitors. One approach to creating these composites is to use a particle film together with vapor deposited polymers, which can yield high performance, but also forms a structurally asymmetric device. The performance of a nanoparticle (Ba, Sr)TiO₃ (BST)/parylene‐C composite capacitor is compared to that of a nanoparticle BST capacitor without the polymer layer under both directions of bias. The composite device shows a five orders of magnitude improvement in the leakage current under positive bias of the bottom electrode relative to the pure‐particle device, and four orders of magnitude improvement when the top electrode is positively biased. The voltage tolerance of the device is also improved and asymmetric (44 V vs. 28 V in bottom and top positive bias, respectively). This study demonstrates the advantage of this class of composite device construction, but also shows that proper application of the device bias in this type of asymmetrical system can yield an additional benefit. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2013     

Influence of conformational changes of co(III)–poly-N-vinyl-2-methylimidazole complexes on electron-transfer reactions of the complexes

In order to study the effect of conformational changes in electron-transfer reactions of Co(III)–polymer complexes, cis-[Co(III)(en)₂LCl]Cl₂, where the ligand L is PVI(poly-N-vinyl-2-methylimidazole) or NEI (N-ethylimidazole), was prepared. Electrontransfer reactions with ferrous sulfate or FeEDTA^2? were examined mainly with respect to the effects of the degree of coordination, ionic strength, composition of reaction solvent, in relation to the conformational changes. In the reduction by FeEDTA^2?, an increase in the degree of coordination of Co(III)–PVI brought about an extreme increase in its reactivity, while it was almost unity in the reduction by ferrous sulfate. With an increase in the ionic strength, the reactivity decreased due to the electrostatic shielding in the reduction by FeEDTA^2?. It was noticed that the reaction of Co(III)–PVI was much more enthalpically disadvantageous due to the shrinkage of the polymer chain than that of Co(III)–NEI, when neutral salts were added. In an aqueous alcoholic solvent, an increase in the alcohol concentration accelerated the reaction with FeEDTA^2?, and especially in the reaction of Co(III)-PVI, the maximum and minimum points of the reactivity were observed. On increasing the reaction temperature, the maximum and minimum points shifted to lower alcohol concentration. These phenomena are discussed in regard to the conformational changes of Co(III)–PVI.     

Effect of the Conformation of Polymer Chain on the Reduction Rate of Polyacrylatopentaamminecobalt(III) by Polymer-Bound Ferrous Chelates and the Excited State of Tris(Bipyridine)Ruthenium(Ii)

Electron transfer reactions of Co(NH₃)₅PAA (PAA = polyacrylic acid) with either the polyanionic polymer-bound ferrous chelate, Fe¹¹P-SS (P-SS = vinylbenzylaminediacetate-co-styrenesulfonate) or the uncharged polymer-bound ferrous chelate, Fe¹¹P-VPRo (P-VPRo = vinylbenzylaminediacetate-co-vinylpyrrolidone), and the Ru(bpy)²⁺ ₃ photosensitized reduction of Co(NH₃)₅PAA have been investigated in aqueous solutions at pH 5.4, I = 0.06 (I is ionic strength), and 25°C. For the ferrous chelate reductions, the second-order rate constants for Fe¹¹-PSS and Fe¹¹P-VPRo were almost equal to that for the corresponding nonpolymer-bound ferrous chelate, Fe¹¹BDA (BDA = benzylaminediacetate). The results indicate that there is no appreciable steric hindrance due to the polymer chains of the polymer-bound ferrous chelates and that the effect of columbic repulsion force between the polyanion chains can be ignored for the reaction of Co(NH₃)₅PAA with Fe¹¹P-SS. The results also suggest that there are two kinds of the pendant Co(III) species, “reactive” and “inert.” The inert Co(III) species are shielded by the polymer chains from attack of the Fe(II) chelates that are present in the bulk solutions. A similar reaction behavior was observed in the Ru(bpy)²⁺ ₃ photosensitized reduction of Co(NH₃)₅PAA at pH 5.4. For the Co(III) complex having an extremely few Co(III) complex moieties on the polymer chain, almost all of the Co(III) groups were hardly reduced by the excited state of Ru(bpy)²⁺ ₃, and reverse quenching occurred due to binding of the Ru(bpy)²⁺ ₃ to the polyacrylic acid chain of the polymer complex. On the other hand, for Co(NH₃)₅PAA with a relatively large number of the Co(III) moieties on the polymer chain, lifetime measurements at a higher concentration of the Ru(bpy)²⁺ ₃ showed a double-exponential fit, which suggests that there are two parallel decay processes. The fast and slow components mainly correspond to the decays: Ru(bpy)²⁺ ₃ quenched by Co(III) and reverse quenching due to binding of Ru(bpy)²⁺ ₃ into the compact polymer chains.     

Copper(II) ion-selective microelectrochemical transistor

A device has been developed for the measurement of copper(II) ions (Cu⁺⁺) in aqueous medium. The device reported here is an electrochemical transistor that consists of two platinum electrodes separated by 100-μm spacing and bridged with an anodically grown polycarbazole film. The undoped polycarbazole film is observed to be highly selective for the Cu(II) ions. In a completed device, the conductivity of the polycarbazole film changes on addition of Cu (II)ions. This change in conductivity is attributed to the conformational changes in the polymer phase on occupation of the Cu(II) ions, without affecting electron/proton transfer. The device turns on by adding 2.5×10⁻⁶ M Cu(II) ions and reaches a saturation region above a concentration of 10⁻⁴ M Cu(II) ions. In this concentration range, the plot of I _D vs log[Cu(II)] is linear. The selectivity of the device for other metal ions such as Cu(I), Co(II), Fe(II), Fe(III), Zn(II), and Pb(II) is also studied.     

Metal complex-substituted polysiloxanes as novel coatings for capillary electrophoresis and capillary electrochromatography

Two novel polysiloxane-based polymers, which contain metal complexes, have been prepared. To prepare the Co(TACN)3+(2) (TACN= 1,4,7-triazacyclononane) based polymers, an orthoamide derivative of TACN was added to bromobutane-substituted methylpolysiloxane and hydrolyzed with base. Co(II) was then coordinated to the TACN, followed by cobalt oxidation to make polymer A or followed by N-octyl TACN coordination and cobalt oxidation to make polymer B. In both materials, TACN forms thermodynamically and kinetically stable Co(TACN)3+(2) complexes in which the six coordination sites of the Co(III) are occupied by nitrogens from the TACN. The polymers were coated on fused-silica capillary columns and spherical silica particles, which were used for capillary electrophoresis and capillary electrochromatography, respectively. The open and packed columns showed strong and pH-independent reversed electroosmotic flow.     

Enhanced cooperativity through design: pendant Co(III)--salen polymer brush catalysts for the hydrolytic kinetic resolution of epichlorohydrin (salen=N,N'-bis(salicylidene)ethylenediamine dianion)

The Co(III)--salen-catalyzed (salen=N,N'-bis(salicylidene)ethylenediamine dianion) hydrolytic kinetic resolution (HKR) of racemic epoxides has emerged as a highly attractive and efficient method of synthesizing chiral C(3) building blocks for intermediates in larger, more complex molecules. HKR reaction rates have displayed a second order dependency on the concentration of active sites, and thus researchers have proposed a bimetallic transition state for the HKR mechanism. Here we report the utilization of pendant Co(III)--salen catalysts on silica supported polymer brushes as a catalyst for the HKR of epichlorohydrin. The novel polymer brush architecture provided a unique framework for promoting site-site interactions as required in the proposed bimetallic transition state of the HKR mechanism. Furthermore, the polymer brushes mimic the environment of soluble polymer-based catalysts, whereas the silica support permitted facile recovery and reuse of the catalyst. The polymer brush catalyst displayed increased activities over the soluble Jacobsen Co--salen catalyst and was observed to retain its high enantioselectivities (>99 %) after each of five reactions despite decreasing activities. Analysis indicated decomposition of the salen ligand as an underlying cause of catalyst deactivation.     

Synthesis of Some Polymer‐Metal Complexes and Elucidation of their Structures

In this study, the nine coordination polymers of Fe(III), Co(II) and Ni(II) salts have been synthesized using polyacrylamide (PAA), polt(ethylene glycol) (PEG) and poly(vinyl alcohol) (PVA) and their structures were characterized by magnetic and conductivity measurements, ultraviolet‐visible (UV‐VIS), FTIR spectroscopy and thermogravimetric analysis (TGA). The structures of Fe(III) complexes in the all coordination polymers were found as tetrahedral. The structures of PAA‐Co(II) coordination polymer was determined as octahedral geometry whereas PEG‐Co(II) and PVA‐Co(II) complexes showed as tetrahedral structure. PAA‐Ni(II) and PEG‐Ni(II) complexes have octahedral geometry, whereas PVA‐Ni(II) has a square planar structure. Besides, the stress‐strain experiments of PVA‐metal coordination polymers obtained rubber‐like structure were carried out and the value of breaking‐strain of PVA‐Ni(II) complex was found to be about 17% of vulcanized natural rubber. The conductivities of the resulting polymer‐metal complexes were measured by four‐probe technique and were found in the range 10^?5?10^?6 Scm^?1. Thus, it was suggested that they can be used in the field potential application of conducting polymers. TGA results revealed that among the complexes PEG‐Fe(III) and PVA‐Fe(III) complexes have the highest thermally stable.     

M(III)Dy(III)3 (M = Fe(III), Co(III)) complexes: three-blade propellers exhibiting slow relaxation of magnetization

[Dy(III)(HBpz(3))(2)](2+) moieties (HBpz(3)(-) = hydrotris(pyrazolyl)borate) and a 3d transition-metal ion (Fe(III) or Co(III)) have been rationally assembled using an dithiooxalato dianion ligand into 3d-4f [MDy(3)(HBpz(3))(6)(dto)(3)]·4CH(3)CN·2CH(2)Cl(2) (M = Fe (1), Co (2) complexes. Single-crystal X-ray studies reveal that three eight-coordinated Dy(III) centers in a square antiprismatic coordination environment are connecting to a central octahedral trivalent Fe or Co ion forming a propeller-type complex. The dynamics of the magnetization in the two isostructural compounds, modulated by the nature of the central M(III) metal ion, are remarkably different despite their analogous direct current (dc) magnetic properties. The slow relaxation of the magnetization observed for 2 mainly originates from isolated Dy ions, since a diamagnetic Co(III) metal ion links the magnetic Dy(III) ions. In the case of 1, the magnetic interaction between S = 1/2 Fe(III) ion and the three Dy(III) magnetic centers, although weak, generates a complex energy spectrum of magnetic states with low-lying excited states that induce a smaller energy gap than for 2 and thus a faster relaxation of the magnetization.     

Memristive Effect in Ti3C2Tx (MXene) Polyelectrolyte Multilayers

The emerging novel class of two-dimensional materials – MХenes – have attracted significant research attention. However, there are only few reports on using the most prominent member of the MXene family, Ti₃C₂T_x, as an active material for memristive devices within a polyelectrolyte matrix and its deposition on inert electrodes like ITO and Pt. In this study, we systematically investigate Ti₃C₂T_x MXenes synthesized with two classical delamination agents, such as lithium chloride and tetramethylammonium hydroxide, to identify the most suitable candidate for memristive device applications. The characteristics of memristors based on the hybrid structures consisting of MXene−polyelectrolyte multilayers, specifically polyethyleneimine (PEI) and poly(sodium 4-styrenesulfonate) (PSS) are explored. The PEI(MXene)/PSS memristor exhibits a voltage threshold (V_SET/RESET) range of 1.5–2.0 V, enabling the transition from a high-resistive state (HRS) to a low-resistive state (LRS), along with a significant current switching ratio of approximately two orders of magnitude. The observed V_SET/RESET difference of approximately 4 V is further supported by density functional theory (DFT) calculated redox potential. These findings underscore the potential of polyelectrolyte-based memristors, such as the in PEI−Ti₃C₂T_x−PSS system, in facilitating the development of highly functional, self-assembled memristive devices with diverse applications.     

Dinuclear Co(II)Co(III) mixed-valence and Co(III)Co(III) complexes with N- and O-donor ligands: characterization and water oxidation studies

The tridentate ligand N-methyl-N,N-bis(2-pyridylmethyl)amine (L) has been employed to synthesize a dinuclear Co(II)Co(III) mixed-valence complex containing μ-methoxo and μ-carboxylato bridging ligands, [LCo(II)(μ-carboxylato)bis(μ-methoxo)Co(III)L](ClO(4))(2). In this complex, the two pseudo-octahedral Co centers have an identical ligand environment, yet the average Co-N and Co-O bond distances at the two Co ions differ significantly. Electrochemical, spectroscopic, and magnetic susceptibility measurements confirm that it belongs to a localized Class II mixed-valence system, despite the presence of a short Co···Co distance of 3.021 ?. Oxidation of this Co(II)Co(III) complex leads to formation of the corresponding Co(III)Co(III) complex that was characterized structurally and spectroscopically. In addition, dinuclear and trinuclear μ-hydroxo Co(III) complexes have been obtained in the presence of phosphate anions and absence of methanol, respectively, suggesting that an additional bridging ligand is needed to stabilize the Co(III)bis(μ-hydroxo)Co(III) fragment. Moreover, the ability of the mixed-valence Co(II)Co(III) complex and the three related Co(III) complexes to electrocatalytically oxidize water was also investigated. The observed limited water oxidation catalytic ability for these systems suggests that a multinuclear Co cluster and/or presence of O-rich ligands may be needed for the generation of efficient molecular Co-based water oxidation catalysts.     

Study of the degradation of polyurethanes. III. Mechanism of the photodegradation of polyurethane

The effect of triplet sensitizers, benzophenone and anthraquinone and metal acetylacetonates [Co(II, III), Cu, Sn, and Ni] on the photodegradation of polyurethane was examined. Ultravioletvisible (UV-V) absorption spectra, gel formation, and luminescence emission of the polymer before and after irradiation were measured. Changes in UV-V absorption of the polymer and the formation of an insoluble fraction in the polymer were accelerated in the presence of the triplet sensitizers, and (Co(II, III)), Cu, and Sn acetylacetonates. Unirradiated polyurethane was excited by irradiation at 290 and 346 nm, and emitted light at 310 and 420 nm. After 1/2 hr irradiation emission of luminescence was observed at 430 nm, excitation at 290 and 346 nm; after 2hr irradiation at 530 nm, excitation at 420 nm was observed. The results suggest that photodegradation of the polyurethane proceeds via excited triplet states forming excimer between the polymers at the initial stage and exciplexes between the polymer and degradation products or intermediates after a certain irradiation.     

Hole injection/transport materials derived from Heck and sol-gel chemistry for application in solution-processed organic electronic devices

An organosilicate polymer, based on N,N'-diphenyl-N,N'-bis(4-((E)-2-(triethoxysilyl)vinyl)phenyl)biphenyl-4,4'-diamine (TEVS-TPD) with extended conjugation between the Si atom and the aromatic amine, was prepared under mild conditions via sequential Heck and sol-gel chemistry and used as an alternative to poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS), the most widely used planarizing hole injection/transport layer in solution-processed organic electronic devices. Spin-coating TEVS-TPD polymer solutions yield defect-free, uniform, thin films with excellent adhesion to the ITO electrode. Upon thermal cross-linking at 180 °C, the cross-linked polymer exhibits excellent solvent resistance and electrochemical stability. Solution-processed organic light emitting diode (OLED) devices using iridium-based triplet emitting layers and cross-linked TEVS-TPD films as a hole injection/transport layer show significantly improved performance including lower leakage current, lower turn-on voltage, higher luminance, and stability at high current density, as compared to the control device prepared with PEDOT:PSS.     

Solid phase extraction and determination of metal ions in aqueous samples using Quercetin modified Amberlite XAD-16 chelating polymer as metal extractant

A new chelating polymer has been developed using Amberlite XAD-16 anchored with Quercetin. The modified polymer was characterised by Fourier Transform Infra Red (FTIR) spectroscopy, thermogravimetric analysis, surface area analysis and elemental analysis. The Quercetin anchored polymer showed superior binding affinity for Cr(III), Mn(II), Fe(III), Co(II), Ni(II) and Cu(II) with greater than 95% adsorption under optimum conditions. The optimum pH conditions for the quantitative sorption of metal ions were studied. The developed method showed superior extraction qualities with high metal loading capacities of 387, 313, 195, 473, 210 and 320 µmol g^?1 for Cu(II), Co(II), Cr(III), Fe(III), Mn(II) and Ni(II), respectively. The rate of metal ion uptake i.e. kinetics studies performed under optimum levels, showed t _1/2 for Co(II), Cu(II), Cr(III), Fe(III), Mn(II) and Ni(II) is 20, 15, 25, 10, 30 and 15 min, respectively. Desorption of metal ions was effective with 10 mL of 2 M HCl prior to analysis using flame atomic absorption spectrophotometer. The chelating polymer was highly ion selective in nature even in the presence of interferent ions, with a high preconcentrating ability for the metal ions of interest. The developed chelating polymer was tested on its utility with synthetic and real samples like river, tap water samples and also with multivitamin tablets. It showed relative standard deviation (R.S.D.) values of/less than 3.0% reflecting on the accuracy and reproducibility of data using the newly developed chelating polymer.     

An ionic liquid form of DNA: redox-active molten salts of nucleic acids.

Ionic liquids are described that contain duplex DNA as the anion and polyether-decorated transition metal complexes based on M(MePEG-bpy)(3)(2+) as the cation (M = Fe, Co; MePEG-bpy = 4,4'-(CH(3)(OCH(2)CH(2))(7)OCO)(2)-2,2'-bipyridine). When the undiluted liquid DNA-or molten salt-is interrogated electrochemically by a microelectrode, the molten salts exhibit cyclic voltammograms due to the physical diffusion (D(PHYS)) of the polyether-transition metal complex. When M = Co(II), the cyclic voltammogram of the melt shows an oxidative wave due to the Co(III/II) couple at E(1/2) = 0.40 V (versus Ag/AgCl) and a D(PHYS) of 6 x 10(-12) cm(2)/s, which is significantly lower than that for Co(MePEG-bpy)(3)(ClO(4))(2) (D(PHYS) = 2.6 x 10(-10) cm(2)/s) due to greater viscosity provoked by the DNA polymer. When a 1:1 mixture is made of the Co(MePEG-bpy)(3).DNA and Fe(MePEG-bpy)(3)(ClO(4))(2) melts, two redox waves are observed. The first is due to the Co(III/II) couple, and the second is a catalytic wave due to oxidation of guanine in DNA by electrogenerated Fe(III) in the undiluted melt. Independent experiments show that the Fe(III) form of the complex selectively oxidizes guanine in duplex DNA. These DNA molten salts constitute a new class of materials whose properties can be controlled by nucleic acid sequence and that can be interrogated in undiluted form on microelectrode arrays.     

Synthesis and characterization of cobalt(III) tetraaza macrocyclic complexes containing chloro and azido ligands

The complexes [Co(L)Cl₂]Cl · 4H₂O (1) and [Co(L)(N₃)₂]N₃ · 2H₂O (2) (L = 3,14-dimethyl-2,6,13,17-tetraazatricyclo [14,4,0^1.18,0^7.12]docosane) have been synthesized, and structurally characterized by X-ray crystallography, spectroscopy and cyclic voltammetry. The crystal structure of (1) is centrosymmetric and the cobalt(III) atom has an axially elongated octahedral geometry with four nitrogen atoms of the macrocycle and two chloride ligands. The cobalt(III) ion in (2) is coordinated to four nitrogen atoms from the macrocycle, and two azide ligands in an octahedral environment, which forms the 1D polymer through hydrogen bonding contacts involving the cation, azide anion and solvent water molecules. Electronic spectra of the complexes also exhibit a low-spin octahedral environment. Cyclic voltammetry of the complexes undergoes a one-electron wave corresponding to Co(III)/Co(II) processes. The electronic spectra and electrochemical behaviors of the complexes are significantly affected by the nature of the axial ligands.     

Tuning of electronic structures of quasi-one-dimensional bromo-bridged Ni(III) complexes with strong electron-correlation by doping of Co(III) ions, [Ni(1-x)Co(x)(Chxn)(2)Br]Br(2)

We have succeeded in synthesizing the Ni(III) complexes doped by Co(III) ions, [Ni(1-x)Co(x)(chxn)(2)Br]Br(2) (x = 0, 0.043, 0.093, and 0.118) by using an electrochemical oxidation method. The single-crystal reflectance spectrum of x = 0.118 shows an intense CT band about 0.5 eV, which is lower than that of [Ni(chxn)(2)Br]Br(2) (1.3 eV). The single-crystal electrical conductivities at room temperature of these compounds increase with increase of the amounts of doping of Co(III) ions. In the ESR spectra, peak-to-peak line widths DeltaH(pp) at room temperature change about 600 G in [Ni(chxn)(2)Br]Br(2) to 200 G in x = 0.118. Such a large x dependence of DeltaH(pp) seems to be ascribed to the increasing contribution from the increasing Curie spins which have smaller line width. Therefore, we have tuned the electronic structures of quasi-one-dimensional bromo-bridged Ni(III) complexes with strong electron correlations by doping of Co(III) ions.     

Outer-sphere electron-transfer reactions of co(III)–polymer complexes in relation to its polymer effects

The outer-sphere electron-transfer reactions between [Co(III)(NH₃)₅L] (CIO₄)₃ [L = polyethyleneimine (PEI), L = NH₃(Amm)] or cis-[Co(III)(en)₂L′Cl]Cl₂ [L′ = poly-N-vinyl-2-methylimidazole(PVI), poly-4-vinylpyridine (PVP), N-ethylimidazole (NEI), pyridine (Py)] and various Fe(II) were studied. In the reaction with Fe(II)-(phen)₃²⁺, the reactivity of Co(III)–PEI was smaller than that of Co(III)–Amm due to the larger electrostatic repulsion. On the other hand, the reactivity of Co(III)–PEI was larger by a factor of 80 in the reaction with Fe(II)(H₂O)₆²⁺. From the results of rapid-scanning spectroscopy, the higher reactivity of Co(III)–PEI is caused by the coordination of free ethyleneimine residues in the Co(III)–PEI to Fe(II)–ion. Further more, the hydrophobic interaction between heteroaromatic polymer ligands and Fe(II)-(phen)₃²⁺ brought about the higher reactivities of Co(III)–PVI and Co(III)–PVP. Three interactions caused by the essential properties of polymers are discussed in relation to conformational changes.     

Preparation and characterization of ultrafine co and ni particles in a polymer matrix

A facile route for in situ synthesis of Co and Ni nanoparticles in a preorganized polyacrylamide gel is reported. Metal-polymer composites were prepared by gamma-irradiation at room temperature. The Co nanoparticles were roughly 3-5 nm in size and were stable in the polymer matrix in the presence of air. The presence of Co and Ni nanoparticles was established by their ability to transfer an electron to methyl viologen {paraquat: 1,1'-dimethyl 4,4'-dipyridinium dichloride; MV(2+) (Cl(-))(2)}. The Co and Ni nanoparticles were probed for their magnetic characteristics by a superconducting quantum interferometer device (SQUID) magnetometer and display a low superparamagnetic blocking temperature T(B) of about 13 and 10 K, respectively. The field-dependent magnetic behavior below T(B) displays the standard features corresponding to superparamagnetism, as expected for very small Co and Ni crystallites. This also suggests that particles are polycrystalline in nature.     

A Memristive Element Based on an Electrically Controlled Single-Molecule Reaction

The exponential proliferation of data during the information age has required the continuous exploration of novel storage paradigms, materials, and devices with increasing data density. As a step toward the ultimate limits in data density, the development of an electrically controllable single-molecule memristive element is reported. In this device, digital information is encoded through switching between two isomer states by applying a voltage signal to the molecular junction, and the information is read out by monitoring the electrical conductance of each isomer. The two states are cycled using an electrically controllable local-heating mechanism for the forward reaction and catalyzed by a single charge-transfer process for the reverse switching. This single-molecule device can be modulated in situ, is fully reversible, and does not display stochastic switching. The I–V curves of this single-molecule system also exhibit memristive character. These features suggest a new approach for the development of molecular switching systems and storage-class memories.