Organic vapor sensing properties and characterization of α-naphthylmethacrylate LB thin films

Determination of organic vapor sensing properties of α-Naphthylmethacrylate (α-NMA) monomer based Langmuir-Blodgett (LB) thin films was aimed in this study. LB thin film fabrication was performed on quartz glass and quartz crystal substrates in order to investigate the characterization and organic vapor properties of α-NMA materials by using UV-Visible, Atomic Force Microscopy (AFM) and Quartz Crystal Microbalance (QCM) techniques. π-A isotherm graph was taken and a suitable surface pressure value were primarily determined as 13?mN m^?1 for successful α-NMA LB thin film fabrication. Transfer ratio value was found to be ≥ 0.93 for quartz glass and quartz crystal substrates. The typical frequency shift per layer was obtained as 16.93?Hz/layer and the deposited mass onto a quartz crystal was calculated as 271.30?ng/layer (1.02?ng mm^?2). The sensing responses of α-NMA LB films against dichloromethane, chloroform, toluene and m-xylene were measured by QCM system. Dichloromethane created the maximum shift in the resonance frequency than other organic vapors used in this study. Results exhibited that α-NMA LB thin films were potential candidates for organic vapor sensing applications, especially high sensitive detection of dichloromethane at room temperature.     

Adsorption kinetics of a fluorescent dye in a long chain fatty acid matrix

This work reports the adsorption kinetics of a highly fluorescent laser dye rhodamine B (RhB) in a preformed stearic acid (SA) Langmuir monolayer. The reaction kinetics was studied by surface pressure-time (π-t) curve at constant area and in situ fluorescence imaging microscopy (FIM). Increase in surface pressure (at constant area) with time as well as increase in surface coverage of monolayer film at air-water interface provide direct evidence for the interaction. ATR-FTIR spectra also supported the interaction and consequent complexation in the complex films. UV-vis absorption and Fluorescence spectra of the complex Langmuir-Blodgett (LB) films confirm the presence of RhB molecules in the complex films transferred onto solid substrates. The outcome of this work clearly shows successful incorporation of RhB molecules into SA matrix without changing the photophysical characteristics of the dye, thus making the dye material as LB compatible.     

有机HTDIOO分子LB膜结构的AFM研究

利用原子力显微镜（AFM）对有机分子HTDIOO单层和多层LB膜结构进行了观察·实验结果表明，针尖与LB膜表面分子间的相互作用力会对成像的膜结构有影响．当悬臂针尖与LB膜表面分子的相互作用力较大时，针尖会扰动HTDIOO分子在单层LB膜中的有序排列．HTDIOO单层LB膜具有有序结构；而在多层LB膜中，HTDIOO分子则聚集在一起形成了一定的畴结构．     

有机HTDIOO分子LB膜结构的AFM研究

利用原子力显微镜（ＡＦＭ）对有机分子ＨＴＤＩＯＯ单层和多层ＬＢ膜结构进行了观察。实验结果表明，针尖与ＬＢ膜表面分子间的相互作用力会对成像的膜结构有影响。当悬臂针尖与ＬＢ膜表面分子的相互作用力较大时，针尖会扰动ＨＴＤＩＯＯ分子在单层ＬＢ膜中的有序排列。ＨＴＤＩＯＯ单层ＬＢ膜具有有序结构；而在多层ＬＢ膜中，ＨＴＤＩＯＯ分子则聚集在一起形成了一定的畴结构。     

Structural characterizations of oligopyridyl foldamers, α-helix mimetics

Protein-protein interactions are central to many biological processes, from intracellular communication to cytoskeleton assembly, and therefore represent an important class of targets for new therapeutics. The most common secondary structure in natural proteins is an α-helix. Small molecules seem to be attractive candidates for stabilizing or disrupting protein-protein interactions based on α-helices. In our study, we assessed the ability of oligopyridyl scaffolds to mimic the α-helical twist. The theoretical as well as experimental studies (X-ray diffraction and NMR) on conformations of bipyridines in the function of substituent and pyridine nitrogen positions were carried out. Furthermore, the experimental techniques showed that the conformations observed in bipyridines are maintained within a longer oligopyridyl scaffold (quaterpyridines). The alignment of the synthesized quaterpyridine with two methyl substituents showed that it is an α-helix foldamer; their methyl groups overlap very well with side chain positions, i and i + 3, of an ideal α-helix.     

pH值和钙离子对尖吻蝮蛇抗血小板凝集素二级结构的影响

尖吻蝮蛇毒中抗血小板凝集素是凝血因子IX/凝血因子X结合蛋白，它具有抗凝血和抑制血小板凝集双重活性。用红外光谱、拉曼光谱和CD谱研究了抗血小板凝集素的二级结构以及pH值和钙离子对其二级结构的影响。用CD谱测得，在水溶液中，抗血小板凝集素的主要骨架构象为β-折叠(26.3%)和α-螺旋(19.6%)结构。拉曼光谱显示，在粉末状态，其α-螺旋含量显著降低。CD谱还表明，抗血小板凝集素在pH值3.0～11.0范围内保持稳定的天然结构，钙离子诱导的抗血小板凝集素结构变化是可逆的，钙离子在稳定抗血小板凝集素的天然结构中起重要作用。     

Polymer-surfactant layered heterostructures by electropolymerization of phenosafranine in Langmuir-Blodgett films

Langmuir-Blodgett (LB) films of the water-soluble dye phenosafranine (PS) have been prepared by its adsorption from aqueous dye solution to an arachidic acid (AA) monolayer at the air-water interface. Atomic force microscopy (AFM) images of the LB films revealed the effect of change in pH of deposition on the degree of complexation of AA with the PS dye. Well-defined circular islands and holes were observed which disappeared with the increase in pH. Polarized absorption studies indicated that the dye molecules are oriented uniaxially with their long axis titled at a constant angle to the surface normal of the LB film. Within the restricted geometry of the LB film, the PS dye was electropolymerized to form a two-dimensional film of poly(phenosafranine) sandwiched between arachidic acid layers. The film was characterized by IR spectroscopy, cyclic voltammetry, and AFM. X-ray diffraction studies reveal the presence of a layer structure in the AA-PS LB film before and after polymerization. The polymer film showed highly anisotropic electrical conductivity of ca. 10 orders of magnitude. This indicates the formation of two-dimensional polyPS layers between arachidic acid layers resulting in a layered heterostructure film having alternate conducting and insulating regions. Also, the conductivity of the polyPS prepared from LB film was found to be approximately 2.5 times higher than the conductivity of polyPS prepared by solution polymerization method.     

Organization and properties of a conjugated poly(heteroarylene methines) at the air-water interface and in the Langmuir-Blodgett films

A poly(heteroarylene methine) derivative, poly[(2,5-thiophenediyl) (p-n-methyl, n-octylaminobenzylidene) (2,5-thiophenequinodimethaneiyl)] (PTABQ), has been synthesized and spread at the air-water interface. The influences of three kinds of solutions on PTABQ monolayer behavior at the air-water interface have been investigated via the measurements of the pi-A isotherm and film stability. The results show that all three kinds of PTABQ solutions are apt to form the stable and transferable monolayer film organized with the plane of its pi-system nearly perpendicular to the air-water interface. Moreover, the monolayer-forming ability of PTABQ can be improved by introducing a water-soluble amphiphilie as an extractable spread-aiding component, which is further proved by the AFM images and FTIR spectra of the transferred films. UV-visible absorption spectra indicate that the well-ordered layer-by-layer structure is successfully controlled in the LB films. The optical bandgap of PTABQ is reduced for the ordered arrangement of its molecules in LB films. The intrinsic electrical conductivity of PTABQ LB films is 8.1 x 10(-8) S/cm and the conductivity of iodine-doped films is 5.7 x 10(-7) S/cm.     

Effect of water and air-water interface on the structural modification of Ni-arachidate Langmuir-Blodgett films

Nickel arachidate (NiA) Langmuir-Blodgett (LB) films have been deposited on hydrophilic Si(0 0 1) substrates by three (up-down-up) and five (up-down-up-down-up) strokes. During deposition, substrates were kept inside the water subphase for different times after each down stroke. Structural information of all the LB films have been obtained from X-ray reflectivity (XRR) studies. One and two symmetric monolayer (SML) was deposited on top of the asymmetric monolayer (AML) in three and five stokes respectively. All the preformed LB films were then used to go through the air-water interface with the same speed that was used at the time of film deposition. Structural information obtained from the XRR studies show that mainly the top layer density decreases after passing through the air-water interface but the layered structure remains the same. Information obtained from both the XRR and atomic force microscopy (AFM) studies suggest that molecules peeled from the top SML layer do not reincorporate with the LB film through tail-tail hydrophobic interaction. Our study shows that NiA LB film has better stability compared with cadmium arachidate LB film inside the water subphase without forming any out-of-plane molecular reorganization.     

Fabrication of electrochemical transistor based on pi-conjugate polymer Langmuir-Blodgett film

We fabricated an efficient organic electrochemical transistor (OECT) composed of polymer Langmuir-Blodgett (LB) film. The pi-conjugated polymer LB film, which was constructed from a poly(N-dodecylacrylamide) (pDDA) and poly(3-hexylthiophene) (PHT) mixture, was used as a conduction channel layer to connect source and drain electrodes. The mixed-polymer LB film was characterized using UV-vis spectroscopy, X-ray diffraction (XRD), atomic force microscopy (AFM), and cyclic voltammetry. Subsequent UV spectra measurements, XRD measurements, and AFM measurements show that PHT forms a crystalline lamellar domain in the layered structure of pDDA. The OECT included 10 layers of the mixed-polymer LB film as the conduction channel layer. The OECT showed an on/off ratio of 1.1x10(4) and mobility of 7.5x10(-2) cm2 V(-1) s(-1) at low gate (VG=-1.2 V) and source-drain voltages (VDS=-0.5 V). Moreover, the necessary charge to operate the OECT was 1.1x10(-9) mol of e(-1) cm(-2), which was 2 orders smaller than the value reported using a similar device structure. The relatively high on/off ratio and low charge consumption suggest that this OECT, which is fabricated from pi-conjugated polymer LB films, is applicable to macroelectronic devices.     

Raman光谱研究铜锌超氧化物歧化酶及其金属取代衍生物的二级结构

本文测定了铜锌超氧化物歧化酶（Cu2Zn2SOD)及其金属取代衍生物Cu2Ni2SOD的Raman光谱,对图谱进行了归属,并定量测定了两种SOD的二级结构,同时对结构与活性的关系进行了讨论。     

生物活性胶原蛋白及明胶形态的表征研究

采用弱酸处理法,从新鲜牛皮中提取了胶原蛋白,通过与明胶对比,采用CD、AFM、FTIR和荧光方法对其结构形态进行了表征研究。结果表明,所提取胶原蛋白保持了固有的生物活性,具有典型的α-螺旋结构。首次建立了稳态荧光的表征方法,不仅与其他方法具有重要互补性,而且具有准确、灵敏、快捷的特点,是表征、研究胶原蛋白及其变性/复性行为的有效手段。     

Characterization of Langmuir and Langmuir-Blodgett films of a thiomacrocyclic ionophore by surface pressure and AFM

The new synthesized thiomacrocyclic ionophore 4-phenyl-4-sulfide-11-(1-oxodecyl)-1,7-dithia-11-aza-4-phosphacyclotetradecane has proven to form Langmuir and Langmuir-Blodgett (LB) films. This ionophore shows a large affinity for copper(II) ions. Thus, the influence of the subphase composition on the surface pressure-area isotherms has been studied. The LB films have been observed by AFM and the effect of the subphase composition and the deposition surface pressure on the LB films is discussed. AFM image morphology has been correlated to the ionophore molecular structure. Surface pressure-area isotherms and AFM images show that the presence of copper(II) ions has an important role in the film structure.     

Comparison of two force fields in MD-simulations of α-helical structures in keratins

Molecular dynamic (MD) simulations based on two different force fields, CVFF and CFF91, were carried out in order to check their feasibility for the structural investigation of the wool intermediate filament (IF) monomeric unit. Selecting an ideal α-helix as start conformation, all MD-simulations with CVFF in vaccum show the α-helix to be unstable. Independently of the amino acid sequence of the α-helix, a new helical structure with a larger diameter arises during the MD-simulation, due to a shift of the intrahelical hydrogen bonds. However in simulations with surrounding water the α-helix remains stable throughout the simulations with the CVFF force field. In contrast to this, MD-simulations in vaccume based on the CFF91 force field are able to determine different stabilities for the α-helical start conformation of various IF-segments, that agree well with secondary structure predictions. The simulation results obtained with CFF91 in vacuum can like wise be verified using an explicit water environment. We found that higher partial charges attributed to the atoms of the amide groups that form the intrahelical hydrogen bonds are the reason for the superiority of the CFF91 force field.     

Headgroup effects of template monolayers on the adsorption behavior and conformation of glucose oxidase adsorbed at air/liquid interfaces

Stearic acid (SA) and octadecylamine (ODA) monolayers at the air/liquid interface were used as template layers to adsorb glucose oxidase (GOx) from aqueous solution. The effect of the template monolayers on the adsorption behavior of GOx was studied in terms of the variation of surface pressure, the evolution of surface morphology observed by BAM and AFM, and the conformation of adsorbed GOx. The results show that the presence of a template monolayer can enhance the adsorption rate of GOx; furthermore, ODA has a higher ability, compared to SA, to adsorb GOx, which is attributed to the electrostatic attractive interaction between ODA and GOx. For adsorption performed on a bare surface or on an SA monolayer, the surface pressure approaches an equilibrium value (ca. 8 mN/m) after 2 to 3 h of adsorption and remains nearly constant in the following adsorption process. For the adsorption on an ODA monolayer, the surface pressure will increase further 1 to 2 h after approaching the first equilibrium pressure, which is termed the second adsorption stage. The measurement of circular dichroism (CD) spectroscopy indicates that the Langmuir-Blodgett films of adsorbed GOx transferred at the first equilibrium state (π = 8 mN/m) have mainly a β-sheet conformation, which is independent of the type of template monolayers. However, the ODA/GOx LB film transferred at the second adsorption stage has mainly an α-helix conformation. It is concluded that the specific interaction between ODA and GOx not only leads to a higher adsorption rate and adsorbed amount of GOx but also induces a conformation change in adsorbed GOx from β-sheet to α-helix. The present results indicate that is possible to control the conformation of adsorbed protein by selecting the appropriate template monolayer.     

A hydrogen peroxide biosensor based on Langmuir-Blodgett technique: Direct electron transfer of hemoglobin in octadecylamine layer

The present paper describes the modification of hemoglobin (Hb)-octadecylamine (ODA) Langmuir-Blodgett (LB) film on a gold electrode surface to develop a novel electrochemical biosensor for the detection of hydrogen peroxide. Atomic force microscopy (AFM) image of Hb-ODA LB film indicated Hb molecules existed in ODA layer in a well-ordered and compact form. The immobilized Hb displayed a couple of stable and well-defined redox peaks with an electron transfer rate constant of 4.58 ± 0.95 s⁻¹ and a formal potential of −185 mV (versus Ag/AgCl) in phosphate buffer (1.0 mM, pH 5.0) contain 0.1 M KCl at a scan rate of 200 mV s⁻¹, characteristic of Hb heme Fe(III)/Fe(II) redox couple. The formal potential of Hb heme Fe(III)/Fe(II) redox couple in ODA film shifted linearly between pH 5 and 8 with a slope of −23.8 mV pH⁻¹, suggesting that proton took part in electrochemical reaction. The ODA could accelerate the electron transfer between Hb and the electrode. This modified electrode showed an electrochemical activity to the reduction of hydrogen peroxide (H₂O₂) without the aid of any electron mediator.     

三聚噻吩的表面光电压谱研究

采用表面光电压和电场诱导表面光电压技术研究了三聚噻吩在外电场作用下的电子运动行为,结合三聚噻吩的UV光谱、极化子概念以及前线轨道理论,指认了三聚噻吩能级跃迁性质,即380nm附近的峰为带－带跃迁峰,477,465和600nm附近的峰是与单极化子有关的电子跃迁;而在770和990nm附近的峰则是与双极化子有关的电子跃迁峰。     

Wettability changes in the formation of polymeric multilayers on cellulose fibres and their influence on wet adhesion

Elucidating the assembly mechanism of the collagen at interfaces is important. In this work, the structures of type I collagen molecules adsorbed on bare mica and on LB films of propanediyl-bis(dimethyloctadecylammonium bromide) transferred onto mica at zero surface pressure was characterized by AFM. On mica, the granular morphologies randomly distributed as elongated structures were observed, which were resulted from the interlacement of the adsorbed collagen molecules. On the LB films, the topographical evolution of the adsorbed collagen layers upon the increasing adsorption time was investigated. After 30 s, the collagen assembled into network-like structure composed of the interwoven fibrils, called as the first adlayer, which was attributed to its adsorption on the LB film by means of a limited number of contact points followed by the lateral association. One minute later, the second adlayer was observed on the top of the first adlayer. Up to 5 min, collagen layers, formed by inter-twisted fibrils, were observed. Under the same conditions after 1 min adsorption on LB film, the AFM image of the layer obtained in the diluted hydrochloric acid solution is analogous to the result of the sample dried in air, indicating that it is the LB film that leads to the formation of the network structure of collagen and the formation of the network structures of collagen layers is tentatively ascribed to the self-assembly of type I collagen molecules on LB film, not to the dewetting of the collagen solution during drying.     

First-principles study of the crystal and electronic structures of α-tetragonal boron

The crystal and electronic structures of α-tetragonal (α-t) boron were investigated by first-principles calculation. Application of a simple model assuming 50 atoms in the unit cell indicated that α-t boron had a metallic density of state, thus contradicting the experimental fact that it is a p-type semiconductor. The presence of an additional two interstitial boron atoms at the 4c site made α-t boron semiconductive and the most stable. The cohesive energy per atom was as high as those of α- and β-rhombohedral boron, suggesting that α-t boron is produced more easily than was previously thought. The experimentally obtained α-t boron in nanobelt form had about two interstitial atoms at the 8i sites. We consider that the shallow potential at 8i sites generates low-energy phonon modes, which increase the entropy and consequently decrease the free energy at high temperatures. Calculation of the electronic band structure showed that the highest valence band had a larger dispersion from Γ to Z than from Γ to X; this indicated a strong anisotropy in hole conduction.     

Md-simulation of α-keratin intermediate filaments

In recent years powerful computer systems have become readily accessible to simulate complex chemical problems. Based on the primary structure of the intermediate filament monomer unit of wool, small sequences are selected. Their molecular dynamic behaviour is simulated, in order to investigate the secondary and tertiary structure as well as their stability. The simulations are carried out for a helical segment and a linker segment, selecting the ideal α-helix as start conformation. In vacuum all simulations show an unstable α-helix due to shifts of the intrahelical hydrogen bonds. So a new helical structure with a larger helix diameter is formed. However in simulations with surrounding water the α-helix remains stable throughout the simulation time. Up to now it has not been possible to dectect any fundamental difference in the molecular dynamic behaviour of the helical and the linker segment.