Biosorption of reactive dye from aqueous media using Saccharomyces cerevisiae biomass. Equilibrium and kinetic study

The biosorption Brilliant Red HE-3B reactive dye by nonliving biomass, Saccharomyces cerevisiae, in batch procedure was investigated. Equilibrium experimental data were analyzed using Freundlich, Langmuir and Dubinin — Radushkevich isotherm models and obtained capacity about 104.167 mg g^?1 at 20°C. The batch biosorption process followed the pseudo-second order kinetic model. The multi-linearity of the Weber-Morris plot suggests the presence of two main steps influencing the biosorption process: the intraparticle diffusion (pore diffusion), and the external mass transfer (film diffusion). The results obtained in batch experiments revealed that the biosorption of reactive dye by biomass is an endothermic physical-chemical process occurring mainly by electrostatic interaction between the positive charged surface of the biomass and the anionic dye molecules. The biosorption mechanism was confirmed by FT-IR spectroscopy and microscopy analysis      

Stereoselective preparation of mono- and bis-derivatives of pentacyclo[6.3.0.02,6.03,10.05,9] undecane (D 3-trishomocubane)

The rearrangement of easily accessible Cookson’s diketone with chlorosulfonic acid in chloroform followed by the acidic hydrolysis gave 6-chloro-7-hydroxy-dichloropentacyclo[6.3.0.0^2,6.0^3,10.0^5,9]undecane-4-one, whose syn-stereochemistry was assigned through the X-ray crystal structure analysis. This key structure was used for the stereoselective synthesis of the D ₃-trishomocubane derivatives as well as for the preparation of potential drugs bearing hydroxy- and amino-functional groups. A new multigram preparative synthesis of D ₃-trishomocubane was developed.      

Interfacial behavior of water bound to nitrocellulose containing residual nitric and sulfuric acids

To prepare nitrocellulose (NC), microcrystalline cellulose was treated in a mixture of nitric and sulfuric acids. Prepared NC containing a small amount of acids was studied at a different hydration degree (h = 10–1000 mg g^?1) in different dispersion media (chloroform-d, acetone-d₆ or their mixtures) using low-temperature ¹H NMR spectroscopy. The hydration degree and the presence of residual acids affected the temperature dependence of the chemical shifts of proton resonance of water bound to NC. The Gibbs free energy of bound water became less negative with increasing hydration rate. The chloroform and acetone media affect the behavior of bound-to-NC water unfrozen at T<273 K differently. Quantum chemical calculations were performed using ab initio (HF/6-31G(d,p)), DFT (B3LYP/6-31G(d,p)) and semiempirical PM7 methods to analyze the interfacial behavior of water interacting with NC containing residual amounts of nitric and sulfuric acids.      

Electrochemical determination of tyrosine in the presence of uric acid at a carbon paste electrode modified with multi-walled carbon nanotubes enhanced by sodium dodecyl sulfate

Tyrosine (Tyr) was quantitated with high sensitivity and selectivity in the presence of uric acid (UA) using a carbon paste electrode modified with multi-walled carbon nanotubes. Tyr and UA were catalytically oxidized with diffusion-controlled characteristics. They were determined simultaneously by differential pulse voltammetry with a potential difference of 350 mV. The electrocatalytic currents increase linearly with Tyr and UA concentrations 4×10^?7?1×10^?4 M and 3×10^?7?2×10^?4 M. Their detection limits were 1×10^?7 and 5.1×10^?8 M respectively. In the presence of sodium dodecyl sulfate the Tyr detection limit improved from 1×10^?7 to 6.9×10^?8 M. The electrode was successfully used to quantitate Tyr and UA in serum.      

Voltammetric quantitation at the mercury electrode of the anticholinergic drug flavoxate hydrochloride in bulk and in a pharmaceutical formulation

Flavoxate hydrochloride, 2-piperidinoethyl 3-methyl-4-oxo-2-phenyl-4-H-chromene-8-carboxylate, is a smooth muscle antispasmodic. Its electrochemical behavior was studied at the mercury electrode in buffered solutions containing 30% (v/v) methanol using dc-polarography, differential-pulse polarography, cyclic voltammetry, and linear sweep-and square-wave adsorptive stripping voltammetry. Sensitive and precise procedures were developed for determination of bulk flavoxate hydrochloride and in the pharmaceutical formulation Genurin® S.F, without sample pretreatment or extraction. Limits of quantitation (LOQ) of 1 × 10^?5, 5 × 10^?6, 1 × 10^?8 and 1 × 10^?9 M flavoxate hydrochloride were achieved by dc-polarography, differential-pulse polarography, linear sweep and square-wave adsorptive stripping voltammetric, respectively.      

A low-cost automated flow analyzer based on low temperature co-fired ceramic and LED photometer for ascorbic acid determination

An automated flow analyzer based on low temperature co-fired ceramic (LTCC), a solid-phase reactor (SPR) and a low-cost photometer was designed for ascorbic acid (AA) determination in pharmaceutical formulations. It consists of a peristaltic pump, three-way solenoid valves, SPR to chemically convert Cu(II) into Cu(I), and a LTCC device for mixing the liberated copper with bathocuproine and detection. The flow cell in the LTCC employed an ultrabright LED — photodiode photometer. The analyzer successfully determined AA in pharmaceutical formulations. The analytical curve from 8.5×10^?6 to 7.0×10^?4 M gave a detection limit of 7.0×10^?7 M and a RSD of 2.1% for a 2.0×10^?4 M AA solution (n = 10). A high sampling frequency of 102 h^?1 and low reagent and sample consumption (150 µL) resulted.      

Determination of lead in solution by solid phase extraction, elution, and spectrophotometric detection using 4-(2-pyridylazo)-resorcinol

Lead (+2) was selectively adsorbed on a solid phase extraction (SPE) gel (molecular recognition technology, MRT), quantitatively extracted, and spectrophotometrically determined as the Pb(II)-PAR (4-(2-pyridylazo)-resorcinol) complex. The linear range was 0.01 to 0.75 mg L^?1 and the detection limit was 6.4 µg L^?1. The MRT-SPE allows selective Pb(II) extraction from complex ion-rich matrices, which is difficult with other techniques. Interference from common matrix ions such as Fe²⁺, Ni²⁺, Cu²⁺ or Co²⁺ is minimized.      

Biodegradation of Benzo[a]Pyrene through the use of algae

In this work for disposal of the biologically hard decomposed pollutant Benzo[a]Pyrene (BaP) photooxidation Chlorella kessleri was used. The simulation model system under the different experimental conditions (varying biomass and light intensity) was evaluated. For quantitative analysis of the decrease in BaP, GC/MS technique was used. The highest degradation efficiency was achieved in the case of biomass from the culture of live algae (29%) and light intensity at level of 13.5 W m^?2. When the dry biomass was used, degradation under the same conditions was lower because of lack of enzymatic activity in the system.      

Formation of amyloid-like aggregates through the attachment of protein molecules to a Congo red scaffolding framework ordered under the influence of an electric field

This study describes a technique which makes it possible to introduce the amyloid-like order to protein aggregates by using the scaffolding framework built from supramolecular, fibrillar Congo red structures arranged in an electric field. The electric field was used not only to obtain a uniform orientation of the charged dye fibrils, but also to make the fibrils long, compact and rigid due to the delocalization of pi electrons, which favors ring stacking and, as a consequence, results in an increased tendency to self-assemble. The protein molecules (immunoglobulin L chain lambda, ferritin) attached to this easily adsorbing dye framework assume its ordered structure. The complex precipitating as plate-like fragments shows birefringence in polarized light. The parallel organization of fibrils can be observed with an electron microscope. The dye framework may be removed via reduction with sodium dithionite, leaving the aggregated protein molecules in the ordered state, as confirmed by X-ray diffraction studies.      

Cobalt electrodeposition onto polycrystalline gold from ammoniacal solutions

In the present work, the cobalt electrodeposition onto polycrystalline gold electrodes from aqueous solutions containing 0.01M CoSO₄ + 1 M (NH₄)₂SO₄ at pH=7 was analyzed. Linear voltammetry results suggested a change in the kinetic of the cobalt electrodeposition. In all cases, the nucleation rate (A), the number of active nucleation sites (N ₀) and the saturation number of nuclei (N _s ) values were potential dependent. The calculated Gibbs free energy (ΔG) for this system was 1.88×10^?20 J nuclei^?1 and the transfer coefficient for the Hydrogen Electroreduction Reaction (HER) was 0.47.      

Voltammetric behavior and quantitative determination of ambazone concentrations in urine and in a pharmaceutical formulation

The use of square wave adsorptive stripping voltammetry (SWAdSV) in conjunction with a cyclic renewable silver amalgam film electrode (Hg(Ag)FE) for the analytical determination of ambazone in urine samples and pharmaceutical formulations is described. A single reduction peak in Britton-Robinson buffer at pH 4.0 was detected at about ?1.4 V versus Ag/AgCl. Mechanistic studies have shown that the compound can act as an electrocatalyst. The method was validated. The analytical curve was linear in the concentration range from 1.0×10^?9 to 1.0×10^?7 mol L^?1. The detection and quantification limits were found to be 3.0×10^?10 mol L^?1 and 1.0×10^?9 mol L^?1, respectively. The proposed method was successfully applied to ambazone determination in real samples.      

Voltammetric behavior of rutin at a boron-doped diamond electrode. Its electroanalytical determination in a pharmaceutical formulation

This paper examined for the first time, the possibilities of the usage of a boron-doped diamond electrode for the redox behavior of rutin using cyclic and adsorptive stripping voltammetry. The cyclic voltammograms showed a pair of redox peaks at lower potentials followed by an irreversible oxidation peak at higher positive potential. Using square-wave adsorptive stripping voltammetry, the compound yielded a well-defined voltammetric response in Britton-Robinson buffer, pH 4.0 at +0.48 V (vs. Ag/AgCl) (after 60 s accumulations at a fixed potential of 0.2 V). The calibration curve was linear in the concentration range from 0.01 µg mL^?1 to 0.1 µg mL^?1 (1.64×10^?8 M ? 1.64×10^?7 M). A detection limit of 0.0017 µg mL^?1 (2.78×10^?9 M) was observed without any chemical modifications and electrochemical surface pretreatments. As an example, the practical applicability of boron-doped diamond electrode was tested with the measurement of rutin in dietary supplement products.      

Debromination of 2,4,6-tribromophenol coupled with biodegradation

The application effect of aluminium and their alloys and mixtures with nickel was studied for the complete hydrodebromination of 2,4,6-tribromophenol (TBP) to phenol in aqueous NaOH solution at room temperature. It was found that the Raney Al-Ni alloy can rapidly transform TBP to phenol. Removal efficiency of 25 mM TBP solution in aqueous NaOH (15 g L^?1) solution at the end of 1h reaction was 100% using 4 g L^?1 Al-Ni. The hydrodebromination is accompanied by the dissolution of aluminium and formation of soluble Al(OH)₄ ^?1 anions under these reaction conditions. After completion of the hydrodebromination reaction removal of the dissolved metals was achieved by precipitation of appropriate hydroxides by adjustment of the pH value and filtration, the filtrate was treated with Pseudomonas or Rhodococcus bacterial strains to degrade dissolved phenol. The combined application of both (chemical-biological) treatments produced degradations of 100% of aromatic compounds.      

The use of ultrasonic treatment for improvement of metrological performance of sorption atomic absorption determination of lead(II) and cadmium(II) traces

The optimal parameters for ultrasonic treatment (frequency 200–300 kHz, intensity 2–4 W cm^?2) were obtained to intensify Pb(II) and Cd(II) sorption concentration by carbon sorbent from apricot pit. The combined action of ultrasonic frequency of 18 kHz and 1 MHz on concentrate slurry increases its sedimentation stability from 3 to 180 minutes and decreases S_r value up to 7% at Pb(II), Cd(II) hybrid sorption atomic absorption determination in natural waters, brines, common salt.      

Spectrophotometric study of competitive complexation equilibria involving overlapped spectral responding species: Determination of the stability constant of bismuth-pyrophosphate complex

Spectrophotometric study of competitive complex formation equilibria involving overlapped spectral responding species applying a simple and versatile algorithm was carried out. The algorithm involves multivariable regression for calculation of equilibrium concentrations from multiwavelength data and mass action law for the stability constant calculation. The used regression functions are part of common statistical software. Stability constants and complex stoichiometry of competing equilibria were simultaneously determined. The species concentration profiles at several spectral overlapping and ??-coefficient of competing reaction were obtained. Non-absorbing bismuth ?? pyrophosphate (PPh) system was studied as a competitive reaction of bismuth ?? 4-(2-Pyridylazo) resorcinol (PAR) complex. The formation of Bi-PPh complex with 1:1 stoichiometry was proved in the studied concentration region (C_Bi = 1×10^?5 mol L^?1; C_PPh = 5×10^?6 ? 1×10^?4 mol L^?1). The stability constant of the complex at pH 1 and ?? = 1.0 have been determined: log?? = 4.2±0.2.      

Differential pulse adsorptive stripping voltammetric determination of methotrexate using a functionalized carbon nanotubes-modified glassy carbon electrode

A glassy carbon electrode (GC) containing multiwalled functionalized carbon nanotubes (MWCNTs) immobilized within a dihexadecylhydrogenphosphate film (DHP) is proposed as a nanostructured platform for determination of methotrexate (MTX) concentration (a drug used in cancer treatment) using differential pulse adsorptive stripping voltammetry (DPAdSV). The voltammograms for a MTX solution using MWCNTs-DHP/GC electrode presented an oxidation peak potential at 0.98 V vs. Ag/AgCl (3.0 mol L^?1 KCl) in a 0.1 mol L^?1 sulphuric acid. The apparent heterogeneous electron transfer rate constant of 0.46 s^?1 was calculated. The recovery area of 2.62×10^?9 mol cm² was also obtained. Under the optimal experimental conditions, the analytical curve was linear in the MTX concentration range from 5.0×10^?8 to 5.0×10^?6 mol L^?1, with a detection limit of 3.3×10^?8 mol L^?1. The MWCNTs-DHP/GC electrode can be easily prepared and was applied for the determination of MTX in pharmaceutical formulations, with results similar to those obtained using a high-performance liquid chromatography comparative method.      

Sensitive and fast determination of papaverine by adsorptive stripping voltammetry on renewable mercury film electrode

The renewable mercury film electrode, applied for the determination of papaverine traces using differential pulse adsorptive stripping voltammetry (DP AdSV) is presented. The calibration graph obtained for papaverine is linear from 1.25 nM (0.42 µg L^?1) to 95 nM (32.2 µg L^?1) for a preconcentration time of 60 s, with correlation coefficient of 0.998. For the renewable mercury electrode (Hg(Ag)FE) with a surface area of 9.1 mm² the detection limit for a preconcentration time of 60 s is 0.7 nM (0.24 µg L^?1). The repeatability of the method at a concentration level of the analyte as low as 17 µg L^?1, expressed as RSD is 3.3% (n=5). The proposed method was successfully applied and validated by studying the recovery of papaverine from drugs, urine and synthetic solution.      

Development of a nanocomposite system and its application in biosensors construction

The present work describes the development of a nanocomposite system and its application in construction of a new amperometric biosensor applied in the determination of total polyphenolic content from propolis extracts. The nanocomposite system was based on covalent immobilization of laccase on functionalized indium tin oxide nanoparticles and it was morphologically and structural characterized. The casting of the developed nanocomposite system on the surface of a screen-printed electrode was used for biosensor fabrication. The analytical performance characteristics of the settled biosensor were determined for rosmarinic acid, caffeic acid and catechol (as laccase specific substrate). The linearity was obtained in the range of 1.06×10^?6 ? 1.50×10^?5 mol L^?1 for rosmarinic acid, 1.90×10^?7 ? 2.80×10^?6 mol L^?1 for caffeic acid and 1.66×10^?6 ? 7.00×10^?6 mol L^?1 for catechol. A good sensitivity of amperometric biosensor 141.15 nA µmol^?1 L^?1 and fair detection limit 7.08×10^?8 mol L^?1 were obtained for caffeic acid. The results obtained for polyphenolic content of propolis extracts were compared with the chromatographic data obtained by liquid-chromatography with diode array detection.      

Copper(I) π-complexes with allyl derivatives of heterocyclic compounds: structural survey of their crystal engineering

In this review an exhaustive crystallochemical analysis of copper(I) π-complexes with allyl derivatives of heterocyclic compounds has been performed. Structural genesis of inorganic constituents starting from the simplest units to the most complicated aggregates was considered taking into account the specific role of Cu-(C=C) interaction, the construction of the organic ligands, the basicity and nucleophilic activity of their heteroatoms, as well as olefin Cu(I) π-complex preparation route.