Synthesis and optical properties of self-assembled flower-like CdS architectures by mixed solvothermal process

Self-assembled CdS architectures with flower-like structures have been synthesized by a mixed solvothermal method using ethylene glycol and oleic acid as the mixed solvent at 160°C for 12 h. The results of X-ray diffraction (XRD) patterns, field-emission scanning electron microscopy (FESEM) and transmission electron microscopy (TEM) images indicate that the product exists as the hexagonal wurtzite phase and conatins of larger numbers of flower-like CdS architectures with diameters of 1.8–3 μm. The selected-area electron diffraction (SAED) pattern and the high resolution transmission electron microscope (HRTEM) image reveal that the grain has better crystallinity. The optical properties of flower-like CdS architectures were also investigated by ultraviolet-visable (UV-vis) and photoluminescence spectroscopy at room temperature. A strong peak at 490 nm is shown in the UV-vis absorption, while an emission at 486 nm and another strong emission at 712 nm are shown in the PL spectrum.      

Optimization of synthesis procedure and structure characterization of manganese tungstate nanoplates

A simple and fast chemical method was used for synthesis of manganese tungstate nanoplates in flower-like clusters; while Taguchi robust design was employed as statistical method for optimization of the experimental parameters for the procedure. Ultrafine manganese tungstate plates in flower-like clusters were synthesized via a direct precipitation method involving addition of manganese ion solution to the aqueous tungstate reagent. Effects of various reaction conditions such as manganese and tungstate concentrations, flow rate of reagent addition and reactor temperature on the thickness of the synthesized manganese tungstate plates were investigated experimentally. Analysis of variance (ANOVA) showed that manganese tungstate nanoplates could be effectively synthesized by tuning significant parameters of precipitation procedure. Meanwhile, optimum conditions for synthesis of MnWO4 nanoplates via this simple, fast, and cost effective method were proposed. The structure and composition of the prepared nanoplates under optimum conditions were characterized by EDX, X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), FT-IR spectroscopy, and photoluminescence techniques.      

Effect of hydrothermal treatment on the structure of an aluminosilicate polymer

The effect of hydrothermal treatment on the structure of an aluminosilicate polymer prepared by a polycondensation reaction between silicate and hydroxoaluminate in alkaline aqueous solution was studied. The structural changes were investigated using X-ray diffraction analysis, Fourier-transform infrared spectroscopy, scanning electron microscopy imaging and thermogravimetric analysis. The results indicated that the amorphous aluminosilicate polymer transformed into a crystalline product during the hydrothermal treatment at 145°C. The crystalline phase was identified as a mineral of the zeolite group, most likely phillipsite. This transformation required an alkaline environment during the hydrothermal treatment.      

Synthesis and characterization of nanosized NiO2 and NiO using Triton® X-100

Nanosized NiO₂ particles with an average diameter of 15 nm are prepared by treating of Ni(NO₃)₂ · 6H₂O with an aqueous solution of KClO in the presence of Triton® X-100. This black fine powder of nickel peroxide was characterized by XRD diffraction, energy dispersive spectroscopy (EDS) and scanning electron microscopy (SEM). The as-prepared NiO₂ can be easily transformed to nanosized NiO merely by washing it with acetone. The obtained NiO has an average diameter of 40 nm and was characterized by the same means used for NiO₂. The nanoparticles of NiO₂ and NiO were obtained in high yields and purities.      

Polymer conjugates with potential biological activity based on new derivatives of 2-mercaptobenzoxazole-synthesis and characterization

New potentially biologically active compounds derived from 2-mercapto-benzoxazole were synthesized and coupled on polymeric support of poly (maleic anhydride-alt-vinyl acetate) for the preparation of polymer-drug conjugates with controlled drug release. All compounds were characterized by elemental and spectroscopy (FT-IR, ¹H-NMR) analysis. The toxicological tests recommend the products for further laboratory screening.      

Application of positron spectroscopy for investigation of threshold space of oil-gas rocks

This article considers the possibility of applying the positron annihilation spectroscopy method for investigating the pore space of rocks from oil-gas and methane-coal deposits. The diagnostics of the structure was performed using the method of spectrometry of angular correlation of annihilation rays (ACAR). Using the samples of porous silicon, the authors have shown the applicability of the ACAR method for determination of the average dimensions of spherical and cylindrical nanosized objects and their concentration      

Metals content of soil,leaves and wild fruit from Serbia

The concentrations of Zn, Mn, Fe, Pb, Ni, Cu and Cd in soil, leaves and edible wild fruit (Crataegus laevigata L., Cornus mas L. and Prunus spinosa L.) from southeast Serbia were determined by atomic absorption spectroscopy. Metal translocations from soil to fruit were calculated as well as their oral intake and health risk indices. Positive correlations were found among metal concentrations in soil, leaves and fruit.      

Preparation of selectively protected protoescigenin derivatives for synthesis of escin analogs and neoglycoconjugates

Protoescigenin, the main aglycone of horse chestnut saponin mixture known as escin, was selected as substrate for exploratory chemistry towards selective protection, followed by propargyl ether formation and subsequent condensation with azido-monosaccharides, to obtain novel triazole linked conjugates of the triterpene.      

Reaction of barbituric acid with organic azides and phosphonium ylides

Amination by organic azides has been carried out to provide aminobarbiturates by fusion of a triazole ring to the 5,6-positions of barbituric acid followed by cleavage and thermal elimination of nitrogen, whereas aza-Wittig reaction gave phosphoranylidene barbituric acid salts.      

Copper-cobalt ferrites as catalysts for methanol decomposition

Copper-cobalt ferrites with composition Cu_1?xCo_xFe₂O₄, where x= 0.2 and 0.8 were prepared by thermal treatment of co-precipitated precursor. The obtained materials were characterized by TG-DSC, XRD, Transmission and Conversion Electron Mössbauer spectroscopy and temperature programmed reduction with hydrogen. The catalytic properties of ferrites were tested in methanol decomposition to CO and hydrogen.      

Physico-chemical properties investigation of softwood surface after treatment with organic anhydride

Wood originating from a softwood species was subjected to chemical treatment by reaction with succinic anhydride in N, N-dimethylformamide at different concentration values. Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy analysis were used to study changes that occurred on a softwood surface. The extent of chemical treatment on softwood was evaluated by determining the weight percent gain values. Thermal properties of modified softwood and the water absorption were also evaluated. The chemical treatment with succinic anhydride influenced the thermal stability of the softwood samples with increasing anhydride concentration levels.      

The first synthesis of 3-deoxyoripavine and its utilization in the preparation of 10-deoxyaporphines and cyprodime

The synthesis of 3-deoxyoripavine (7) was realized as a novel and promising intermediate towards the synthesis of the important class of dopaminergic and/or serotonergic 10-deoxyaporphines and the special pharmacological tool µ opioid antagonist cyprodime. Generally, the preparation of these valuable biologically active compounds was achieved in remarkable yields.      

Temperature effect over structure and photochemical properties of nanostructured SnO<Subscript>2</Subscript> powders

We successfully synthesized tin dioxide nanoparticles with polyhedral morphology via an ethylene glycol assisted sol-gel approach. The structural characteristics of three tin dioxide samples were investigated after being thermally treated at 400°C, 600°C and 800°C. X-ray diffraction (XRD) patterns clearly show the formation of single phase tin dioxide nanoparticles, with crystallite size of 6–20 nm, in good correlation with Fourier transform infrared (FTIR) spectra. Transmission electron microscopy (TEM) analysis confirms the formation of 6nm polyhedral nanoparticles for the 400°C sample. Ultraviolet-visible (UV-Vis) and photoluminescence (PL) spectra suggest a high concentration of oxygen vacancies. The oxygen vacancy concentration increases with temperature, due to the combined action of the formation of V_O and the energetic O compensation. X-ray photoelectron spectroscopy (XPS) analysis also confirms the formation of single phase tin dioxide and the presence of oxygen vacancies in good agreement with UV-VIS and PL data.

Open image in new window

     

Quantification of sunscreen 2-phenylbenzimidazole-5-sulfonic acid in cosmetic products and water samples by HPTLC/densitometry with fluorescent detection

The water-soluble sunscreen 2-phenylbenzimidazole-5-sulfonic acid (PBS) was quantified in a sun-care product and water samples by thin layer chromatography followed by densitometric scanning in fluorescence mode (cut-off filter 370 nm, wavelength of excitation — 300 nm). Normal phase TLC was performed on silica gel 60 as stationary phase. Mobile phase used was ethyl acetate-ethanol-water 70:35:30 (v/v/v). The limit of detection (LOD) was 0.0004 μg spot-1, and the limit of quantification (LOQ) was — 0.001 μg spot^?1 without any sample pre-concentration.      

In vitro surface biocompatibility of high-content silicon-substituted calcium phosphate ceramics

The present work investigates surface biocompatibility of silicon-substituted calcium phosphate ceramics. Different silicon-substituted calcium phosphate ceramic bodies were prepared from co-precipitated powders by sintering at 1300°C. The in vitro bioactivity of the ceramics was assessed in simulated body fluid (SBF) at 37°C for periods up to 4 weeks. The changes in the surface morphology and composition were determined by scanning electron microscopy (SEM) coupled with electron probe microanalysis and energy dispersive spectrometer (EDX). Inductively coupled plasma optical emission spectroscopy (ICP-OES) was used to observe the change in ionic concentration of SBF after removal of the samples. The bioactivity of the ceramics increased with an increasing silicate ion substitution in a systematic way. The surface of ceramics with 2.23% silicon substitution was partially covered with apatite layer after one week, while ceramics with 8.1% silicon substitution were completely covered with apatite in the first week. The porous microstructure of high-concentration Si-substituted ceramics helps the dissolution of surface ions and the leaching process. This allows SBF to reach supersaturation in a short time and accelerate the deposition of apatite layer.      

Effects of mechanical activation on structure and photocatalytic properties of ZnO powders

Zinc oxide (ZnO) was mechanically activated in air using a planetary ball mill using varying milling speeds and time. The obtained samples were analyzed by X-ray diffraction analysis (XRD), scanning electron microscopy (SEM) and UV-Vis diffusion reflectance spectroscopy. The photocatalytic activity of the mechanically treated ZnO powders were investigated in the reaction of Malachite Green (MG) degradation in aqueous solution under UV-light irradiation. A decrease in the crystallite size (from 90 to 10 nm) accompanied by an increase of microstrains and lattice parameters were established applying different milling speeds. The agglomeration of the particles was observed by SEM analysis. The absorption spectra of the initial and mechanically activated ZnO samples show shifting of the band position from 360 to 330 nm, which can be related to decrease in the crystalline size. The ZnO powders activated at lower milling speeds (for shorter time intervals) exhibit highest photocatalytic activity.      

Enantioselective Michael additions of aldehydes to nitroalkenes catalyzed with ionically tagged organocatalyst

Enantioselective organocatalytic Michael additions affords useful building blocks for many biologically and medicinally relevant compounds. Ionically-tagged diphenylprolinol silyl ether efficiently catalyzes several Michael additions of aldehydes to nitroalkenes in ionic liquids. The Michael additions work well in ionic liquids; yields up to 95% and enantioselectivities up to 95% ee were achieved. Furthermore, in some cases, the catalytic system was reusable.      

Synthesis,structure and capacitive properties of cobalt hydroxide films on stainless steel substrates

Cobalt (hydro)oxide films on AISI 304 stainless steel and sintered metal fibre filter Bekipor ST 20AL3 were prepared using electrochemical deposition from neutral cobalt acetate solutions under galvanostatic conditions. Deposited films were structurally characterized using X-ray diffraction, Fourier transform infrared spectroscopy and scanning electron microscopy. All electrochemical measurements were performed in aqueous NaOH solution. Capacitive behavior of different films was evaluated using cyclic voltammetry data. The highest specific capacitance (965 F g^?1) was reached when Bekipor ST 20AL3 mesh was used as a support for electroactive substance.