Phenylquinoxaline–Aryl ester block copolymers

Phenylquinoxaline–aryl ester block copolymers were synthesized using well-defined phenolic hydroxyl terminated oligomers via a monomers/oligomer approach. Phenylquinoxaline oligomers with molecular weights of 5600 and 12,900 g/mol were prepared from the condensation of 1,4-bis(phenylglyoxalyl)benzene and 3,3′-diaminobenzidine in the presence of 4-hydroxylbenzil. The oligomers were copolymerized with isophthaloyl chloride and bisphenol A in tetrachloroethane to afford the desired phenylquinoxaline–aryl ester block copolymers. Copolymers with polyester compositions ranging from 15–50 wt % were prepared by controlling the monomers/oligomer stoichiometry. The majority of the materials displayed single phase morphologies with T_gs intermediate to the T_gs for the poly (phenylquinoxaline) and polyester homopolymers. Plots of the reciprocal of the T_g of the copolymers versus composition agreed well with values predicted by the Fox equation. A multiphase morphology was obtained for the copolymer with the highest polyester block length (? 13,000 g/mol), which displayed a T_g at 190 and 300°C indicative of a glassy–glassy system. Significant improvement in the elongations were observed for the copolymers relative to the poly(phenylquinoxaline) homopolymer. The improved elongations were obtained with minimal sacrifice to the modulus. These materials represent the first example of poly(phenylquinoxaline) block copolymers from well-defined phenylquinoxaline oligomers.     

Bis- or tetra-maleimides of substituted s-triazines chain-extended by imide,amide, and urea groups for fire- and heat-resistant applications

Novel phosphorylated bismaleimides and nonphosphorylated tetramaleimides containing substituted s-triazine rings (chain-extended by imide, amide, or urea groups) were prepared and polymerized. These polymer precursors were prepared by reacting 2,4-bis(4-aminophenoxy)-6-diethoxyphosphinyl-s-triazine or 2,4,6-tris(4-aminophenoxy)-s-triazine with maleic anhydride in combination with a bridging agent such as pyromellitic or benzophenone tetracarboxylic dianhydride, terephthaloyl chloride, and tolylene diisocyanate. The structure of polymer precursors was confirmed by infrared (IR) and proton nuclear magnetic resonance (¹H-NMR) spectroscopy and their curing behavior was investigated by differential thermal analysis (DTA). The phosphorylated bismaleimides were thermally polymerized at a lower temperature than did the corresponding nonphosphorylated tetramaleimides. Dynamic thermogravimetric analysis (TGA) showed that the nonphosphorylated and phosphorylated cured resins were stable up to 320–370 and 312–327°C, respectively, in nitrogen or air atmosphere. In addition, the latter afforded a relatively higher char yield. The relative thermal and thermooxidative stability of polymers with regard to the chemical structure of the bridging group was of the order imide > amide > urea. Upon isothermal aging the phosphorylated polymers exhibited a lower weight loss than did the corresponding nonphosphorylated polymers.     

Thermally resistant polymers containing the s-triazine ring

Aromatic dinitriles cyclize to form aromatic polymers containing the s-triazine ring. In this paper, these polymers are compared thermally with each other and with aromatic melamine polymers prepared via the aromatic diamine and cyanuric chloride. One perfluoroaromatic melamine polymer was prepared and compared with the other two types of polymers. The polymers (triazines and melamine) in which biphenyl was the backbone were increasingly stable up to 1000°C. in nitrogen. The triazine polymers as a group were the most stable. The perfluoroaromatic polymer was the most stable melamine up to 500°C. in air but was very unstable above 700°C.     

Poly-as-triazines

Two high molecular weight (η_inh > 1.0) soluble poly-as-triazines have been prepared by the solution polycondensation in m-cresol of 2,6-pyridinediyl dihydrazidine with p,p′-oxybis(phenyleneglyoxal hydrate) and with p,p′-oxydibenzil. Thermal characterization of the poly-as-triazines by TGA showed polymer decomposition temperatures of ～400°C after a 300°C cure in argon. Poly-as-triazines exhibited weight losses <8% after aging in static air at 316°C for 200 hr. Clear yellow films cast for m-cresol solutions exhibited good flexibility and toughness even after aging at 316°C for 200 hr in air and after refluxing in 10% aqueous potassium hydroxide solution for 24 hr.     

Thermosetting acetylene-terminated polyphenylquinoxalines

A series of acetylene-terminated phenylquinoxaline oligomers have been prepared which cure by addition, without the evolution of volatiles. The synthesis utilized the novel terminal acetylene end-capping reagent, 3-(3,4-diaminophenoxy)phenylacetylene. The end-capped oligomers were soluble (20–30%) in low-boiling organic solvents and exhibited a high degree of flow at their softening temperatures. Thermal analytical data obtained on the oligomers indicated initial softening in the vicinity of 160°C and a strong polymerization exotherm reaching a maximum at 274°C. Cured samples (8 hr at 280°C) exhibited T_g values of approximately 320°C. Mass spectrometry–thermogravimetric analysis of the polymers demonstrated that no volatiles were emitted during cure, and that decomposition of the resins initiated at 465°C. Synthetic routes to the acetylene terminated phenylquinoxaline oligomers and the end-capping reagent are discussed as well as the physical properties of the oligomer and cured system.     

Carborane polymers. IV. Polysiloxanes

Carboranes attached to silicon through straight-chain alkyl groups were prepared and characterized for thermal stability by TGA and molecular weight change on heating. The monomers for these polymers were prepared generally by platinum-catalyzed addition of a silylhydride to an alkenyl or dialkenyl carborane. Polymerization was effected by hydrolysis-condensation of chlorosilanes, ring opening of cyclosiloxanes, and condensation of alkoxy and chlorosilanes. Two types of polymer structures were prepared, one contained m-carborane in the chain backbone, the other contained o-carborane as pendant alkylcarborane groups. Both types were obtained as elastomers; however, higher proportions of carborane in the polymers reduced elasticity and finally resulted in nonelastomers. TGA of the backbone carborane siloxane polymer indicated degradation at 370°C. in nitrogen and at 235°C. in air. Chain scission, as determined by molecular weight decrease, was observed on heating in nitrogen at 350°C. TGA of the pendant carborane siloxane polymer indicated that degradation in nitrogen and in air occurred at greater than 400°C. However, chain scission, as determined by molecular weight decrease, was observed upon heating at 300°C. in nitrogen.     

Preparation and properties of high transition temperature aromatic polyphosphonates by phase-transfer-catalyzed polycondensation of phenylphosphonic dichloride with bisphenols

Aromatic polyphosphonates of high molecular weights were prepared from phenylphosphonic dichloride and bisphenols having rigid ring structures by the two-phase polycondensation in organic solvent–aqueous alkaline solution system with phase-transfer catalyst at 0°C or below. The effects of reaction solvent and catalyst on the inherent viscosities of the polymers formed are studied. The glass transition temperatures of the polyphosphonates with biphenyl, phenylindane, and diphenylfluorene units are 120, 124, and 188°C, respectively. These polymers are self-extinguishing and are readily soluble in solvents such as N,N-dimethylacetamide, pyridine, tetrahydrofuran, and chloroform. They began to lose weight above 300°C in air. Copolyphosphonates from combinations of bisphenols and phenylphosphonic dichloride are also prepared and characterized.     

Novel thermotropic esters‐based polymers with broad nematic processing windows

In this study, a new series of semiflexible liquid crystalline (LC) polyesters and poly(ester‐amide)s were synthesized and characterized. Polymers based on 4‐hydroxybenzoic acid (4‐HBA), 6‐hydroxy‐2‐naphthoic acid (HNA), suberic acid (SUA), and sebacic acid (SEA) were modified with hydroquinone (HQ) and different concentrations of 4‐acetamidophenol (AP) to obtain a polyester and two poly(ester‐amide)s, respectively. All polymers were successfully prepared using conventional melt‐condensation techniques. The polymers were characterized by inherent viscosity measurements, SEC, hot‐stage polarizing microscopy, DSC, and TGA. The mechanical behavior was investigated using DMTA and tensile testing. All linear polymers have T_gs in the range of 50–80 °C and melt between 120 and 150 °C. Our polymers display good thermooxidative stabilities (5% wt loss at ～ 400 °C) and exhibit homogeneous nematic melt behavior over a wide temperature range (ΔN ～ 250 °C). The liquid crystal phase was lost when high concentrations of nonlinear monomers such as 3‐HBA (>27 mol %) and resorcinol (RC) (>23 mol %) were incorporated. The LC polyester based on 4‐HBA/HNA/HQ/SUA/SEA could easily be processed into good quality films and fibers. The films display good mechanical properties (E′ ～ 4 GPa) and high toughness, that is, ～ 15% elongation at break, at room temperature. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6565–6574, 2008     

Synthesis and photoluminescence of linear and hyperbranched polyethers containing phenylquinoxaline units and flexible aliphatic spacers

Ultrahigh‐molecular‐weight linear polyethers were prepared through a reaction between the phenylquinoxaline monomers 2,3‐bis(4‐hydroxyphenyl)‐6‐fluoroquinoxaline and 2,3‐bis(4‐hydroxyphenyl)‐6‐(α,α,α‐trifluoromethyl)quinoxaline and 1,12‐dibromododecane. A new hyperbranched polyether containing a phenylquinoxaline moiety was also prepared from a new self‐polymerizable AB₂ monomer, 2,3‐bis(6‐bromohexyloxyphenyl)‐6‐(4‐hydroxyphenyloxy)quinoxaline. All the polyethers were amorphous and soluble in polar aprotic solvents. Their solution‐cast thin films were light yellow, ductile, and optically transparent. The polymers were thermally stable up to 350 °C and had glass‐transition temperatures in the range of 25–83 °C, which depended on the architecture and monomer structure. The monomers and polymers displayed fluorescence maxima in the blue‐light region in the range of 431–449 nm with relatively narrow peak widths; this indicated that they had pure and intense fluorescence. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3587–3603, 2004     

Synthesis,physical, and thermal properties of linear poly(dialkoxyphosphinyl-s-triazine)s

A novel class of linear poly(dialkoxyphosphinyl-s-triazine)s were prepared by interfacial or solution polycondensation reactions of various diamines such as ethylenediamine, hexamethy-lenediamine or bis(4-aminocyclohexyl)methane with 2-dialkoxyphosphinyl-4,6-dichloro-s-triazines. The latter were synthesized by reacting cyanuric chloride with an equimolar amount of trialkyl phosphite. The phosphorous-containing polymers were characterized by inherent viscosity measurements as well as by infrared (IR) and proton nuclear magnetic resonance (¹H-NMR) spectroscopy. The thermal properties of polymers were investigated by differential thermal analysis (DTA) and thermogravimetric analysis (TGA). Pyrolysis of all polymers was exothermic. Polymers were stable up to 150–200°C both in nitrogen and air atmosphere. They afforded 16–42% char yield at 700°C under anaerobic conditions.     

New force-field parameters for use in molecular simulations of s-triazine and cyanurate-containing systems. 1 — derivation and molecular structure synopsis

Cyanate ester resins are an emerging family of high performance polymers that are being studied for a variety of technological applications. The structure of the aromatic sym-triazine ring formed during cure of these polymers is investigated here by analysis of X-ray crystallographic data from a number of model compounds. The data show a preferred conformation of the ring structure with alternating internal bond angles of ca. 112° at nitrogen (C–N–C) and 128° at carbon (N–C–N). The C–N bond lengths are also shorter than those found in pyridine or pyrimidine, leading to a non-planar ring conformation. Force constants for the bond stretch, bend and torsional motions of the sym-triazine ring have also been calculated, using mopac, the semi-empirical quantum mechanics package.     

Synthesis and properties of poly[arylene ether (N-arylenebenzimidazole)]s

Poly(arylene ether)s containing N-arylenebenzimidazole groups were prepared by the aromatic nucleophilic displacement reaction of two new bis(hydroxyphenyl-N-arylenebenzimidazole)s with activated aromatic difluorides in sulfolane at 200°C in the presence of anhydrous potassium carbonate. The bis(hydroxyphenyl-N-arylenebenzimidazole)s were prepared from bis(o-aminoanilino) arylenes and phenyl-4-hydroxybenzoate. The polymers were soluble in N-methyl-2-pyrrolidinone and m-cresol and exhibited inherent viscosities from 0.37–0.86 dL/g and glass transition temperatures from 219–289°C. Thermogravimetric analyses showed 5% weight losses from 463–506°C in air and 467–522°C in nitrogen. Unoriented thin films exhibited tensile strengths, moduli, and break elongations at 23°C of 10.2–12.5 ksi, 318–365 ksi, and 4–7%, respectively, and at 177°C of 5.1–6.9 ksi, 256–296 ksi, and 1–5%, respectively. A 50 : 50 random copolymer prepared from 1,3-bis(4-fluorobenzoyl) benzene, 1,1'-(4,4'-biphenylene)-bis[2-(4-hydroxyphenyl)benzimidazole], and 5,5'-bis[2-(4-hydroxyphenyl)benzimidazole] exhibited higher moisture absorption and lower tensile properties than those predicted by a rule of mixtures relationship. The chemical, physical, and mechanical properties of these polymers are discussed. © 1993 John Wiley & Sons, Inc.?     

New poly(amide-imide)s syntheses. VII. Preparation and properties of poly(amide-imide)s derived from 1,5-bis(4-aminophenoxy) naphthalene,trimellitic anhydride,and various aromatic diamines

New bis(phenoxy)naphthalene-containing poly(amide-imide)s having an inherent viscosity in the range of 0.62–1.09 dL/g were prepared by the direct polycondensation of 1,5-bis(4-trimellitimidophenoxy) naphthalene ( I ) and various aromatic diamines using triphenyl phosphite and pyridine as condensing agents in N-methyl-2-pyrrolidone (NMP) in the presence of calcium chloride. The diimide-diacid (I) was prepared by the condensation of 1,5-bis(4-aminophenoxy) naphthalene and trimellitic anhydride. Most of the polymers were soluble in aprotic solvents such as NMP and N,N-dimethylacetamide (DMAc), and afforded transparent, flexible and tough films upon casting from DMAc solutions. Measurements of wide-angle X-ray diffraction revealed that those polymers containing p-phenylene or oxyphenylene groups were characterized as crystalline polymers. Tensile strength and initial moduli of the polymer films ranged from 61–86 MPa and 1.83–2.21 GPa, respectively. Glass transition temperatures of the polymers were in the range of 231–340°C. The melting points of the crystalline polymers ranged from 375–430°C. The 10% weight loss temperatures were above 512°C in nitrogen and 481°C in air. © 1993 John Wiley & Sons, Inc.     

Phenylated imide–quinoxaline copolymers

Phenylated, ordered imide–quinoxaline copolymers of high oxidative-thermal stability were prepared by one-step solution condensation of aromatic tetraamines with N,N′-bis(4-benzilyl)pyromellitimide. Polymerization in m-cresol leads to high molecular weight polymers that remain soluble. Thermal gravimetric analysis and isothermal decomposition at 400°C shows that these polymers are as stable as polyimides or polyquinoxalines. The polymer decomposition temperatures range between 495 and 550°C, depending upon structure. Also, the rate of isothermal decomposition at 400°C in air showed a strong dependency of weight loss on structure. Tough films were cast from solution.     

Preparation and properties of some water-soluble,comb-shaped,amphiphilic polymers

Water-soluble comb-shaped polymers were prepared through grafting of poly(ethylene glycol) monomethyl ethers (MPEG) onto acrylic and methacrylic ester copolymers by transesterification reactions. The grafting was alkali-catalyzed, and performed in refluxing toluene solution or in melt at 155°C. The grafting efficiency was found to be on the order of 1 graft/10 monomer units. Epoxy groups in glycidyl methacrylate copolymers were also utilized for grafting. The crude graft copolymers were purified through chromatography and characterized by NMR and IR spectroscopy. Polymers prepared from MPEG 2000 were crystalline with melting points 10–15°C lower than the MPEG used. All polymers were shown to be surface active with CMC on the order of 1.5 g/L, and surface tensions of 38–45 dyn/cm. When used as emulsifiers the graft copolymers containing bulky lipophilic ester groups (2-ethylhexyl t-butyl) gave oil-in-water (o/w) and water-in-oil (w/o) emulsions from xylene/water with higher stability than those containing straight chain ester groups (methyl nbutyl n-docecyl). The most stable emulsions were obtained by dissolving the polymers in the organic phase.     

Synthesis and properties of aromatic poly(ester amide)s with pendant phosphorus groups

Two series of phosphorus‐containing aromatic poly(ester amide)s with inherent viscosities of 0.46–3.20 dL/g were prepared by low‐temperature solution polycondensation from 1,4‐bis(3‐aminobenzoyloxy)‐2‐(6‐oxido‐6H‐dibenz〈c,e〉〈1,2〉oxaphosphorin‐6‐yl)naphthalene and 1,4‐bis(4‐aminobenzoyloxy)‐2‐(6‐oxido‐6H‐dibenz〈c,e〉〈1,2〉oxaphosphorin‐6‐yl)naphthalene with various aromatic diacid chlorides. All the poly(ester amide)s were amorphous and readily soluble in many organic solvents, such as N,N‐dimethylformamide, N,N‐dimethylacetamide (DMAc), and N‐methyl‐2‐pyrrolidone (NMP). Transparent, tough, and flexible films of these polymers were cast from DMAc and NMP solutions. Their casting films had tensile strengths of 71–214 MPa, elongations to break of 5–10%, and initial moduli of 2.3–6.0 GPa. These poly(ester amide)s had glass‐transition temperatures of 209–239 °C (m‐series) and 222–267 °C (p‐series). The degradation temperatures at 10% weight loss in nitrogen for these polymers ranged from 462 to 489 °C, and the char yields at 800 °C were 55–63%. Most of the poly(ester amide)s also showed a high char yield of 35–45%, even at 800 °C under a flow of air. The limited oxygen indices of these poly(ester amide)s were 35–46. © 2002 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 459–470, 2002; DOI 10.1002/pola.10129     

Polyimidines: A new class of polymers. III. A comparison of isomers of polypyromellitimidines

The cis (3,3,5,5-), trans (3,3,7,7-), oxo, and thio analogs of tetraphenylpyromellitide were polymerized with 1, 6-hexane diamine, p-phenylene diamine, and p,p'-diaminodiphenyl ether under various conditions. A comparison was then made of reactivity of the isomers and of the properties of the polymers. In general the thio monomers were more soluble and reactive than the oxo. They also gave more thermally stable polymers. The cis isomers of the monomers were more soluble than the trans, but the trans were more reactive. The least stable of the 12 polymers prepared was that from the cis–oxo monomer and 1,6-hexane diamine. It gave a 10% weight loss at 300°C in air and 340°C in nitrogen by TGA. The most stable polymer was from the reaction of the cis–thio pyromellitide with p,p'-diaminodiphenyl ether, which showed 10% weight losses by TGA at 560 and 650°C in air and nitrogen, respectively. The polymers were stable in hot dilute hydrochloric acid and sodium hydroxide. They were all soluble in chloroform, dimethylformamide, and sulfuric acid. Polymers that contained sulfur were also soluble in carbon tetrachloride, benzene, xylene, and toluene. Brittle films could be cast from solution or melt-pressed.     

Synthesis and properties of poly(arylene ether imide ketone)s

Poly(arylene ether ketone)s containing imide units were prepared by the aromatic nucleophilic displacement reaction of the potassium salts of bisphenols with bis(4-fluorobenzoyl)phthalimides in N-methyl-2-pyrrolidone at elevated temperature. The polymers having inherent viscosities of 0.34–0.77 dL/g were obtained in 2 h. The polymers exhibited glass transition temperatures ranging from 216 to 268°C and decomposition temperatures (5% weight loss under air atmosphere) ranging from 450–570°C mainly depending on the bisphenols used in the polymer synthesis. The isothermal TGA measurements (400°C under air or nitrogen atmosphere) revealed that the 4,4'-biphenol- and hydroquinone-based poly(arylene ether ketone imide)s belong to a superior class of heat resistant polymers. The mechanical properties of these polymers are also described. © 1994 John Wiley & Sons, Inc.     

High temperature phosphorylated or nonphosphorylated laminating resins based on maleimido-substituted aromatic s-triazines

Several new phosphorylated or nonphosphorylated maleimide or nadimide systems containing s-triazine rings were synthesized. Their synthesis was accomplished by simple methods utilizing readily available and relatively inexpensive starting materials. All polymer precursors were characterized by infrared (IR) and proton nuclear magnetic resonance (¹H-NMR) spectroscopy. They were thermally polymerized to heat-resistant laminating resins. Thermal characterization of monomers and their cured resins was achieved using differential thermal analysis (DTA), dynamic thermogravimetric analysis (TGA) and isothermal gravimetric analysis (IGA). The cured resins were stable up to 304–330°C both in nitrogen and air atmospheres and formed anaerobic char yield 49–59% at 800°C. The phosphorylated polymers showed a lower temperature of initial weight loss but afforded higher anaerobic char yield than did the corresponding nonphosphorylated polymers. The thermal properties of the polymers were correlated with their chemical structure.     

Synthesis and characterization of poly(arylene ether imidazole)s

Poly(arylene ether imidazole)s were prepared by the aromatic nucleophilic displacement reaction of a bisphenol imidazole with activated aromatic dihalides. The polymers had glass transition temperatures ranging from 230 to 318°C and number-average molecular weights as high as 82,000 g/mol. Thermogravimetric analysis showed a 5% weight loss occurring ～ 400°C in air and ～ 500°C in nitrogen. Typical neat resin mechanical properties obtained at room temperature included tensile strength and tensile modulus of 14.2 and 407 ksi and fracture energy (G_lc) of 23 in. lb/in.² Titanium-to-titanium tensile shear strengths measured at 23 and 200°C were 4800 and 3000 psi, respectively. In addition, preliminary data were obtained on carbon fiber laminates. The chemistry, physical, and mechanical properties of these polymers are discussed.