NMR spectra of model compounds of poly(vinyl chloride)

The NMR spectra of three stereoisomers of 2,4,6-trichloroheptane as model compounds of poly(vinyl chloride) have been studied. Spectra were observed at 60 and 100 Mc./sec., both at room temperature and at high temperatures. A spin-decoupling experiment was performed. Computational analysis of the spectra was carried out on an IBM 7090 computer. The difference of the chemical shifts of the two meso methylene protons at 60 Mc./sec. was found to be ca. 7 cps. for the isotactic three-unit model while it was ca. 16 cps. for the isotactic two-unit model or heterotactic three-unit model. The spectra of poly(vinyl chloride) were interpreted reasonably on the basis of this result. Observed values of vicinal coupling constants of model compounds were interpreted as the weighted means of those for several conformations, and the stable conformations of the models were determined.     

NMR studies of chlorinated poly(vinyl chloride) and polybutadiene

Molecular structures of chlorinated poly(vinyl chloride) and polybutadiene have been studied by high resolution NMR. The spectra of the chlorinated polymers give broad signals. New peaks appear in the lower fields of the ? CH₂? and ? CHCl? groups with increasing chlorine content. The chlorination of poly(vinyl chloride) takes place predominantly on ? CH₂? rather than on ? CHCl? , e.g., a 70% chlorinated polymer has about 10 mole-% of ? CCl₂? groups. Polybutadiene reacts first with chlorine by addition to give a head-to-head poly(vinyl chloride), and then the substitution of the hydrogen atom takes place. Chlorinated polybutadiene with 70% Cl has about 18 mole-% of ? CCl₂? . The multiplets characteristic of spin-spin couplings in the spectrum of the original poly(vinyl chloride) are still observed in that of the highly chlorinated product. This fact shows that a considerable number of poly(vinyl chloride) sequences of certain lengths persist in the highly chlorinated polymer.     

An NMR and DSC-investigation of the poly(vinyl chloride)-dioctylphthalate system

It has been demonstrated that the system poly(vinyl chloride)-dioctylphthalate (PVC-DOP) gives rise to distinct component lines in the wide-line NMR spectrum. These lines correspond to very different degrees of segmental mobility of the material within a large interval of temperatures. We consider that these component lines correspond to at least two PVC-phases of the samples since no established phase separation occurs and since the narrow line registered at higher temperatures vanishes at room temperature. DOP itself exhibits a very narrow line at room temperature. The DSC-results indicate a variety of phases since the transition region occurs over a wider temperature interval when the amount of DOP increases. The T_g of PVC also decreases nearly lineary with the DOP-content. This result indicates an inhomogeneous structure of the system.     

Photo-oxidation of poly(vinyl chloride)

Hydrogen chloride is evolved at an increasing rate in the light-induced oxidation of poly(vinyl chloride) films. These accelerated kinetics were shown to result from an increased absorption of light by the polyenes formed, since the quantum yield of dehydrochlorination (Φ_HCl = 0·015) is independent of the extent of the reaction in the dose range investigated. Determination of the quantum yields of the different processes involved indicate that, for each scission of the polymer backbone, 11 molecules of hydrogen chloride are evolved while three carbonyl groups, two hydroperoxides and 0·4 intermolecular crosslinks appear on the polymer chain. A mechanism that involves β-scissions of the tertiary alkoxy radicals, resulting from non-terminating interactions of α-chloro-peroxy radicals, is suggested to explain the observed increase of the polymer degradation in the presence of oxygen.     

Radiolysis of poly(vinyl chloride)

Allyl free-radical intermediates are detected by ultraviolet absorption at 255 mu in poly(vinyl chloride) irradiated at ?196°C and stored at 25°C. In vacuum at 25°C, allyl radicals are converted into polyenyl free radicals and polyenes. From the nature of allyl radical decay in vacuum, radical chain transfer between polyenyl radicals and poly(vinyl chloride) is inferred. Allyl and polyenyl free radicals are scavenged by oxygen on post-irradiation storage in air.     

Pyrolysis of poly(vinyl chloride)

A pyrolysis–gas chromatography–mass spectrometric technique has been developed to study the thermal degradation of poly(vinyl chlorides) polymerized at different temperatures. Hydrogen chloride and benzene evolution during successive stages of pyrolysis have been quantitatively determined and correlated to the tacticity and molecular weight of the polymer. It was found that lowering the temperature of polymerization and molecular weight depresses benzene evolution and increases char weight but does not affect the HCl yield. It is suggested that the syndiotactic trans microstructure favored at low temperature of polymerization yields polyenes which cannot cyclize to form benzene. As the molecular weight decreases, the increase in number of vinyl chain ends facilitates pyrolytic crosslinking and char formation.     

Photo-oxidation of poly(vinyl chloride)

The photo-oxidation of PVC has been studied over the temperature range 30–150°C. Initiation with ultraviolet (2537A) radiation has been correlated with the presence of minute amounts of ozone. The contribution of atomic oxygen and singlet oxygen (¹Δ_g) molecules to the initiation mechanism is discussed. The β-chloroketones probably formed in the photo-oxidation of PVC, decomposed according to a Norrish type I reaction without loss of chlorine atoms. The gaseous products of the photo-oxidation of PVC at 30°C were carbon dioxide, carbon monoxide, hydrogen, and methane. Hydrogen chloride was obtained only when PVC was heated at high temperatures. When PVC was photo-oxidized and then heated at high temperature, benzene was obtained in addition to hydrogen chloride. The gaseous products from the photo-oxidations of model compounds, such as 4-chloro-2-butanone and 2,4-dichloropentane, were also compared with those from PVC. Hydrogen chloride was detected only after photo-oxidation at temperatures of 25°C or higher. Therefore, it was concluded that hydrogen chloride is mainly a product of thermal decomposition. Since unsaturation was not observed in photo-oxidized PVC films, the cause of discoloration is unclear. When PVC was modified by stabilizers or additives, the oxidative degradation was further complicated by side reactions with the additives.     

Retardation of discoloration of poly(vinyl chloride) and decolorization of discolored poly(vinyl chloride) with diimide

Retardation of discoloration of poly(vinyl chloride) with diimide was studied in dimethylformamide at 130°C. with the use of p-toluenesulfonylhydrazide (PSH) as a source of diimide. A process was proposed that involved prolonging the induction periods of discoloration by inhibiting the development of conjugated polyene structure. The optimum proportion of PSH was one fourth of the poly(vinyl chloride), the best results. Furthermore, poly(vinyl chloride) discolored by thermal degradation in o-dichlorobenzene or gamma-ray irradiation under vacuum was decolorized in solution at 130°C. by addition of PSH. The decolorized poly(vinyl chloride) thus obtained was thermally stable compared with that obtained by oxidative methods.     

Thermal degradation of poly(vinyl chloride)

This paper presents an initial attempt at describing poly(vinyl chloride) (PVC) thermal degradation through a semi-detailed and lumped kinetic model. A mechanism of 40 species and pseudocomponents (molecules and radicals) involved in about 250 reactions permits quite a good reproduction of the main characteristics of PVC degradation and volatilization. The presence of the two step mechanism—the first step of which corresponds to dehydrochlorination and the second to the tar release and residue char formation—are correctly predicted both in quantitative terms and in the temperature ranges. The model was validated by comparison with several thermo gravimetric analyses, both dynamic at different heating rates, and isothermal. When compared with the typical one step global apparent degradation models, the approach proposed here spans quite large operative ranges, especially when it comes to predicting product distributions. The initial results of these product predictions, even though quite preliminary, are encouraging and confirm the validity of the model.     

Antioxidative stabilization of poly(vinyl chloride)

Halogenated resins such as poly(vinyl)chloride undergo rapid degradation when exposed to heat. Such degradation is significantly increased by oxygen, and it is believed that the induction of the process of decomposition is caused by autoxidation of the polymer, followed by extensive dehydrohalogenation. Sulfur-containing peroxide decomposers allow primary stabilization of PVC with organic compounds which are not HCl acceptors but prevent free radical cross-linking of the polymer. This implies a discolored polymer melt (due to loss of HCl and formation of polyenes) which nonetheless exhibits good long term stability (no cross-linking). The stabilization of labile chlorine atoms results from the oxidation of various chain irregularities, and thus the elimination of the early discoloration can be achieved by the use of small quantities of monohydrocarbyltin co-stabilizers. The relative performance of various antioxidant systems are reported and possible stabilization mechanisms are discussed.     

Photosensitized dehydrochlorination of poly(vinyl chloride)

The mechanism of the benzophenone-photosensitized degradation of films of poly-(vinyl chloride) was studied, both under vacuum and in the presence of oxygen. Initial rapid increases in absorption in the 340 nm region strongly implicate the ketyl radical in the initiation process which involves the abstraction by triplet benzophenone of a methylenic hydrogen from poly(vinyl chloride). Dehydrochlorination then occurs by a chain mechanism, and the conjugated polyene structure produced photosensitizes further initiation and, in the presence of oxygen, photo-oxidation of the polymer.     

Suspension polymerization of vinyl chloride and the processibility of poly(vinyl chloride)

The most important technological procedure in the production of PVC is the suspension polymerization of vinyl chloride, as processibility of the polymer may be influenced to a considerable extent by the choice of polymerization conditions. Structure heterogeneities in PVC powders manifest themselves in plasticized PVC by the occurrence of “fish eye” particles. This review concerns the formation and properties of these particles and discusses the causes of their difficult processibility. Also, the relation between polymerization process and PVC dehydrochlorination is discussed and a new mechanism of its initiation based on the reactivity of cisoid enone structures is proposed. These structures catalyze elimination of hydrogen chloride from regular units of PVC by an interchain enzyme-like mechanism giving rise to chloroallyl structures.     

Structure of chlorinated poly(vinyl chloride). V. Molecular parameters of chlorinated poly(vinyl chloride)

The molecular parameters of samples of chlorinated poly(vinyl chloride) (CPVC) and chlorinated β,β-dideuterated poly(vinyl chloride) (β,β-d₂-CPVC) were determined by gel permeation chromatography (GPC), light scattering, osmometry, and viscometry. Comparison of GPC, light scattering, osmometric, and viscometric data resulted in a discussion of the possibility of degradation and the causes of changes in the solution properties in chlorination of PVC and ββ-dideuterated poly(vinyl chloride) (ββ-d₂-PVC). The results obtained are discussed in relation to the mechanism of chlorination of PVC.     

NMR study of poly(vinyl formate)

The high resolution nuclear magnetic resonance spectrum of poly(vinyl formate), yielded, upon examination at 100 Mc./sec., and under the conditions of decoupling, information on the three tactic forms present. The normal and decoupled spectra indicate that only the CHO resonance is sensitive to the stereochemical configuration. The three components of the CHO resonance are tentatively assigned to isotactic (i), heterotactic (h), and syndiotactic (s) triads with increasing field strength, respectively. This assignment was made on the basis of poly(vinyl alcohol) and poly(vinyl acetate) derived from poly(vinyl formate). The results show that the tacticity is slightly dependent upon the temperature of free-radical polymerization.