Red Ionic Water‐Soluble Imidazolium‐Containing Polydiacetylene

Synthesis of a water‐soluble polydiacetylene has been achieved by topochemical polymerization in the solid state of the bis(N‐methylimidazolium)diacetylene monomer. Structural characterization for the monomer by X‐ray diffraction and NMR spectroscopy supports a photopolymerization initiated at the surface. Characterization of the polymer (NMR, UV and Raman spectroscopy, and dynamic light scattering) is given along with a molecular modelling interpretation of the polymerization in the solid state.

     

Assembly of Anionic Conjugated Polymer with 6‐O‐Modified PNP‐β‐Galactoside for Fluorescence Logic‐signal‐based Multiplex Detections of Enzymes

Anionic conjugated polymer (PFP‐SO) was assembled with a novel enzymatic substrate 6‐O‐modified PNP‐β‐galactoside ( 1 ) for sensitive multiplex enzyme detections. The PFP‐SO/ 1 /lipase/β‐galactosidase system has two chemical input signals which are Input 1 (lipase) and Input 2 (β‐galactosidase), and output optical signals such as fluorescence emission at 416 nm or 450 nm. Four types of logic gates, including YES, INH, NAND and AND, were successfully constructed and utilized for multiplex detections of lipase and β‐galactosidase in one tube.

     

Salt effect in the base-catalyzed polymerization of unsaturated amide compounds. IV. Polymerization of p-vinylbenzamide in the presence of LiCl/N,N,N′,N′-tetramethylethylenediamine

In the presence of lithium chloride and N,N,N′,N′-tetramethylethylenediamine, p-vinylbenzamide was polymerized in basic media to form a polymer with structure consisting of units due to both proton transfer and vinyl type polymerization, whereas in the presence of the salt alone the monomer underwent exclusively vinyl type of polymerization to give a polystyrene derivative:      

Reactivity of Diamine Monomers in Non‐Equilibrium Copolycondensation Toward Aromatic Copolyamides

Based on the Hammett equation, a general method is established to relate the polycondensation monomer reactivity with both the monomer structural parameters and the properties of the solvent used for the non‐equilibrium ternary copolycondensation to give copolyamides. Linear plots of the logarithm of the monomer reactivity ratio, log r, versus structure parameter ΔpK could be represented by the equation log r = ρΔpK.

Relationship between log r and ΔpK using THF as the solvent.     

Conformational and Dynamical Properties of the Isolated,Three‐Dimensional Single‐ and Double‐Tethered Polymer Chain on an Infinite Surface

By Monte Carlo simulations we provide insight into the isolated single‐ and double‐tethered (ST and DT) polymer chain attached to an impenetrable surface to elucidate open theoretical questions and guide future experiments investigating the impact of tethering on the genome packaging by concurrent visualisation of multiple loci along the chromosome(s). In the models, either one or both ends (at a grafting distance d) are fixed or the ST and DT chain are “annealed” by permitting the anchor(s) to diffuse laterally along the surface. We analyse chain self‐entanglement, intrachain segment correlations, the relationship between mean square physical distance and corresponding contour length and provide the first report on the diffusion behaviour.

     

One Decade of Microwave‐Assisted Polymerizations: Quo vadis?

The application of microwave irradiation in polymer syntheses and modifications is of continuously growing interest and has received significant international interest since the beginning of the millennium. Preceded by a review that was published 6 years ago, the present paper summarizes the most recent trends in this research area. Radical as well as step‐growth and ring‐opening polymerizations will be addressed; furthermore, the evolution from microwave‐assisted polymerizations to microwave‐assisted material fabrication will be described on the examples of polymeranalogous reactions, polymer/metal composites and bio‐based materials.

     

Ab-initioMRD–CI calculations on a C?NO2 decomposition pathway of nitrobenzene

To study molecular decomposition pathways it is necessary to use ab initio multireference determinant–configuration interaction or MCSCF (multiconfiguration SCF ) calculations. The MRD –CI (multireference double excitation–configuration interaction technique of Buenker and Peyerimhoff) calculations on the decomposition pathway of nitrobenzene were carried out using all of the occupied molecular orbitals in the region of the bond being dissociated, plus all of the virtual orbitals. An effective CI Hamiltonian was used into which were folded the effects of all of the occupied molecular orbitals from which excitations were not allowed. So far we have investigated the lowest ¹A₁, ³A₁, ¹A₂, ³A₂, ¹B₁, ³B₁, ¹B₂, ³B₂ states and are investigating the higher states. Our results show a wealth of structure in the potential energy surfaces for the various electronic states of nitrobenzene as a function of distance. A number of the states are predissociative and change dominant configuration one or more times along these potential energy surfaces.     

Isomérie Polyédrique dans des Spirophosphoranes Possédant le Groupement P?H

We have studied the temperature dependence of NMR spectra of six spirophosphoranes of the general formula: Experimental data show intramolecular isomerism which was explained by pseudo-rotation mechanism (Berry, Lit. 1). In all cases except one we also observed tautomerism between spirophosphorane and phosphite forms.     

The Role of Oxidation in the Migration Mechanism of Layered Silicate in Poly(propylene) Nanocomposites

Summary: Evidence of clay migration from the core to the surface of poly(propylene)/montmorillonite nanocomposites is provided. A three‐ to fivefold increase in the clay concentration of the surface is obtained during isothermal heating in oxidative atmosphere. The mechanism of migration is investigated by means of attenuated total reflectance Fourier transform infrared spectrometry. It is shown that oxygen plays a fundamental role in the migration mechanism.

ρ_Si versus c for the annealed samples.     

A Dual Colorimetric and Fluorometric Sensor for Lead Ion Based on Conjugated Polydiacetylenes

A PDA based sensor, derived from a di‐(2‐picolyl) amine (DPA) substituted diacetylene monomer, displayed a selective colorimetric change and a large fluorescence enhancement in the presence of lead ions. The lead selective PDA‐based chemosensor enabled easy detection of the presence of lead in 100% aqueous solution by the naked‐eye.

     

Synthesis of 2‐alkyl‐4,5‐aryl‐2H‐[1λ6,2,3,6]‐thiatriazine‐1,1‐dioxides

Sulphamoyl chlorides and chlorosulphonyl isocyanate react with monosubstituted hydrazones and alkylhydrazonates to sulphamoyl hydrazones and sulphamoyl hydrazonates respectively. Reaction of benzil monoalkylhydrazones with chlorosulphonyl isocyanate results in formation of 2‐alkyl‐4,5‐aryl‐2H‐ [1λ⁶,2,3,6]‐thiatriazine‐1,1‐dioxides.     

Molecular confirmation and crystal structure of the β form of poly(ethylene oxybenzoate)

The crystal structure of the β form of poly(ethylene oxybenzoate) was analyzed by x-ray diffraction. Four nearly extended molecular chains pass through a unit cell with parameters a = 8.19 Å, b = 11.07 Å, c (fiber axis) = 19.05 Å, β = 114.8°, and the space group P2₁/n-C. The structural difference between the α and β forms is mainly due to the internal rotation angles for the virtual bond and the ? CH₂? CH₂? bond. They are essentially in trans confirmation in the β form, while the α form contains cis and gauche (? CH₂? CH₂? ) conformations.     

Use of the Interpolyelectrolyte Complexes of Poly(acrylic acid)‐Chitosan as Inductors of Tolerance Against Pathogenic Fungi in Tomato (Lycopersicon esculentum Mill. var. Floradade)

The interpolyelectrolyte complexes of poly(acrylic acid)‐chitosan were investigated as inductor of systemic resistance potentially useful in the organic production of vegetables. These complexes, which are water soluble, were tested in tomato (Lycopersicon esculentum Mill. var. Floradade). The seed treatments were carried out using solutions consisting of 0.1 vol.‐% of the complex and 5 g · L^?1 NaCl in water. The data showed that this treatment produced a higher resistance to the attack by Fusarium oxysporum and Phytophthora capsici pathogens in tomato seedlings.

Formation of the interpolyelectrolyte complex of poly(acrylic acid) and chitosan.     

Polymerization of Methyl Methacrylate with Ni(II) α‐Diimine/MAO and Fe(II) and Co(II) Pyridyl Bis(imine)/MAO

Polymerizations of methyl methacrylate with (α‐diimine)nickel(II)/methylaluminoxane (MAO) and (pyridyl bis(imine))iron(II) and (pyridyl bis(imine))cobalt(II)/MAO are reported. Effects of structural variation of the ligand on the activities of catalysts and polymer microstructure are described. The catalyst systems gave syndio‐rich poly(methyl methacrylate). The α‐diimine system showed much higher activity than the pyridyl bis(imine) systems under similar polymerization conditions.

     

Mechanics of Homeotropically Ordered Smectic‐A Elastomers with Global Oblate Chain Conformation

Smectic‐A elastomers combine one‐dimensional translational order of rod‐like segments with the rubber elasticity of a polymer network. In recent years, detailed investigations were carried out on elastomers showing a global prolate chain conformation. In this communication, the first experiments on fluorinated S_A elastomers exhibiting a global oblate chain conformation are presented, where the polymer chains are on average compressed along the layer normal of the lamellar phase structure. The mechanical anisotropy is studied by means of thermoelastic experiments and stress–strain measurements. For the first time, the layer compression modulus B of smectic elastomers is directly measured. B is significantly larger as compared to conventional low molar mass liquid crystals and decreases significantly with increasing local disorder introduced by the isotropic crosslinker.

     

Investigation of the Crossover From Simple Liquid‐Like to a Polymer‐Like Behavior of Polyisoprene by Means of MD Simulations

The crossover from small‐molecule to polymer behavior in realistic models of PI at temperatures well above the glass transition is investigated by means of MD simulations. The molar masses range from the monomer to = 6 800 g · mol⁻¹ which is far from the critical value for entanglement in PI. It is shown that at this temperature the non‐Gaussian parameter almost vanishes in the Q‐range studied. This implies Gaussian behavior in almost all the Q‐range. From the mean square displacement and the incoherent scattering function behavior a smooth transition from the microscopic regime to the Rouse dynamics is observed. The Rouse behavior is achieved at chain molecular weights of about 1 000 g · mol⁻¹, which corresponds to 14 monomer units.

     

Massenspektrometrische Untersuchung organischer Stickstoffverbindungen. XXVII—Intramolekulare Redoxreaktionn bei ionisierten ortho-substituierten Nitroaromaten

Collisional activation demonstrates that the stable ions from o-nitrobenzaldehydedimethylacetale possess the structure of ionized o-nitroso benzoic acid methyl ester. Contrary to previous conclusions it is demonstrated that the structure of the stable ions (m/e 135) from different precursors [i.e. o-nitrobenzyl alcohol o-nitrobenzyl cyanide and o-nitrobenzaldoxime is best represented by 2,1-benzisoxazoline-3-one. Ionized o-nitrosobenzaldehtde rearranged to 2,1-benzisoxazoline-3-one prior to collision induced decomposition, whereas 2-benzoxazolinone and 3-hydroxy-1,2-benzisoxazole do not rearrange within 10^?5 s.     

Evaluation of the Electrophilicites and Band Gaps of Conductive Polymers: A New Model

It is shown that the obtained hardness and electrophilicity values of the short length oligomers for a heterocyclic conductive polymer from density functional theory method are quadraticly correlated to those obtained from semiempirical method. Therefore these quantities for all oligomers (up to 15 repeating units) are predicted using the obtained quadratic relations. Both of these predicted quantities for different oligomers are fitted to a new exponential model (Y = Y_∞ e^d/n) to estimate the electronic properties for the considered conjugated polymers. The calculated band gaps from this model show better agreement with the reported experimental data than those predicted by the previous models. Because of a wide range of variations, the electrophilicity could be a better index for investigating the doping effect in polymers than the hardness.

     

Propagation Rate Coefficient and Fraction of Mid‐Chain Radicals for Acrylic Acid Polymerization in Aqueous Solution

In acrylate polymerizations both SPRs and tertiary MCRs occur. Via pulsed laser polymerization, using a wide range of LPRRs, in conjunction with aqueous‐phase size‐exclusion chromatography, the polymerization of 1.35 mol · L⁻¹ acrylic acid in aqueous solution has been investigated at 6 °C. The sigmoidal decrease in the apparent propagation rate coefficient, k, towards lower LPRRs is in line with recent predictions. At the highest LPRRs, k approaches the rate coefficient of SPR propagation, k, whereas the limiting value of k at low LPRRs approaches the effective propagation rate coefficient, k, which allows for an estimate of the fraction of MCRs under polymerization conditions, x^MCR.