Solution properties of polymers of pyridinium and ammonium methacrylates

Solution properties of poly[1(2-hydroxyethyl)pyridiniumbenzene sulfonate methacrylate] and poly[1(2-hydroxyethyl)trimethylammoniumbenzene sulfonate methacrylate] were studied. Within a certain concentration range of some added low molecular weight electrolytes, phase separation occurs. The dependence of intrinsic viscosity on molecular weight was determined and the steric factor estimated for both polymers. For nonaqueous solvents, an extrapolation of the dependence of the refractive index increment of the polymer on the refractive index increment of the polymer on the refractive index of the solvent leads to an apparent refractive index of the polymer, different from the refractive index determined directly by the immersion method. Some peculiarities of light scattering in solutions with no electrolyte added are mentioned.     

Radiolysis of polymers of chlorine methacrylates

Polymers of α-chloroacrylate (MCA), 1-chloroethyl methacrylate (1CEMA), 2-chloroethyl methacrylate (2CEMA), 2,2,2-trichloroethyl methacrylate (trCEMA) and 1,2,2,2-tetrachloroethyl methacrylate (teCEMA) were γ-irradiated at 77 K. The primary radicals were generated by the abstraction of chlorine. They decay or change into chain end radicals upon warming up to room temperature.     

Solution properties of ion-containing polymers in polar solvents

The placement of ionic groups within the molecular structure of a polymer produces marked modification in physical properties. A large number of studies have been performed on these ion-containing polymers, but few have focused on the effects of anion–cation interactions (i.e., counterion binding or ionization) on hydrodynamic volume, especially as the molecular structure of the solvent and nature of counterion are varied. In this study changes in hydrodynamic volume are followed through reduced viscosity measurements as a function of the abovementioned molecular parameters. The dilute solution properties of various polyelectrolytes that contain sulfonate and carboxylate groups were investigated as a function of the counterion structure, charge density, molecular weight, and solvent structure. The polymeric materials were selected because of their specific chemical structure and physical properties. In the first instance a (2-acrylamide-2 methylpropanesulfonic acid)-acrylamide-sodium vinyl sulfonate terpolymer was synthesized and subsequently neutralized with a series of bases. Viscometric measurements on these materials indicate that the nature of the cation affects the ability of the polyelectrolyte to expand its hydrodynamic volume at low polymer levels. The magnitude of the molecular expansion is shown to be due in part to the ability of the counterion to dissociate from the backbone chain, which, in turn, is directly related to the solvent structure. The changes in solution behaviour of these inomers lend support for the existence of ion pairs (i.e., site binding) and ionized moieties on the polymer chains. Measurements performed in a variety of solvent systems further confirm this interpretation. In addition, and acrylamide-sodium vinyl sulfonate copolymer was partially hydrolyzed with sodium hydroxide to study the effect of varying the charge density at a constant degree of polymerization and counterion structure. The results show that the charge density has a significant effect on the magnitude of the reduced viscosity and dilute solution behaviour. These observations, made in aqueous and nonaqueous solvents, are related to the interrelation of hydrodynamic volume, counterion concentration, and site binding. Again the controlling factor is the degree of site binding of the counterion onto the polymer backbone. Finally, we observe that the increased hydrodynamic volume affects viscosity behavior beyond the polyelectrolyte effect regime. If the average charge density on the macromolecule is relative high and/or the molecular weight is large (≥ 10⁶) sufficient intermolecular interactions will occur to produce rapid changes in reduced viscosity.     

Photoconductivity and hole transport in polymers of aromatic amine-containing methacrylates

Substantial hole transport can be achieved in organic polymers simply by incorporating aromatic amine groups into the monomer. Hole mobilities similar to or greater than those in poly(N-vinyl-carbazole) (PVK) were measured in a series of high molecular weight arylamine-substituted polymethacrylates. The hole transport in these polymers is electric-field-dependent as in PVK, varying between E and E² within a range of 4 × 10⁴ ? ～9 × 10⁵ V/cm. The polymers also exhibit carrier generation in ultraviolet (UV) light in the range of absorption. Synthesis of the monomers, their polymerization, and the general properties of these polymers are discussed.     

Triplet state properties of pyridinium

Pyridinium phosphorescence originates at 334 nm and has a lifetime of 3.5 s; the quantum yield is roughly 0.04. The ODMR spectrum gives a zero-field splitting of |D| = 0.134 cm^?1, |E| = 0.030 cm^?1 . Implications for the lowest triplet state of pyridine are discussed.     

Synthesis and properties of hydroxide conductive polymers carrying dense aromatic side-chain quaternary ammonium groups

A series of hydroxide conductive polymers QTBMs carryingdense aromatic side-chain quaternary ammonium groups has been synthesized by using a new monomer of 3,3′-di(3′′,5′′-dimethylphenyl)-4,4′-difluorodiphenyl sulfone and other commercial monomers via polycondensation reaction, and subsequent bromination, quaternization and alkalization.The chemical structures of the ionomers were confirmed by ~1H-and ~(13)C-NMR spectroscopy. Water uptake, swelling ratio, hydroxide conductivity, the number of bonded water per ammonium group(λ), volumetric ion exchange capacity(IEC_(Vwet)), mechanical and thermal properties, and chemical stability were systematically evaluated for the series of QTBMs membranes. QTBMs showed IECs ranging from1.02 meq·g~(-1)to 2.11 meq·g~(-1); in particular, QTBM-60 membrane with the highest IEC(2.11 meq·g~(-1)) had very high hydroxide ion conductivity of 131.9 m S·cm~(-1) at 80 °C, which was attributed to the well assembled nano-channels with distinct phase separation evidenced by small-angle X-ray scattering(SAXS). It was found that the hydrated QTBMs membranes were mechanically stable with moderate water uptakes and swelling ratios, high chemical stability under the harsh alkaline conditions. This work provides a facile way to prepare anion exchange membranes(AEMs) with high performances for the application in alkaline fuel cells.     

Structure and properties of non-classical polymers. IV. Magnetic properties of polymers with superexchange interaction

It is shown that, for a new class of polymers, ferromagnetic superexchange may arise. The model polymers of the new class have specific electronic structure. In addition to the delocalized system of coupled π electrons, these polymers have singly occupied molecular orbitals localized within each monomer unit. The localized electrons are indirectly exchange coupled, mediated via delocalized orbitals. The resultant exchange interaction is ferromagnetically signed. It depends strongly on the energy gap of the delocalized π-electron system. The suggested model is close to the superexchange of some rare earth magnetics where magnetic f electrons interact indirectly due to delocalized s electron system. The theory of Ruderman, Kittel, Kasuya and Yosida is used in the quantitative treatment of the exchange interaction.     

Sulfur-containing polymers. XVIII. Preparation and properties of thiuram polysulfide polymers

Thiuram polysulfide polymers have been prepared from alkali metal bisdithiocarbamates either by oxidation with ammonium persulfate or by polycondensation with sulfur chlorides. In some cases, isothiocyanate formation and/or thiourea formation were noticed. The polymer properties were significantly affected by the diamines used. Polymers derived from p-phenylenediamine decomposed gradually at room temperature with the liberation of elemental sulfur. Polymers based on aliphatic primary diamines were more stable. Piperazine gave the most stable polymer.     

Solution properties of complexes between oxygen- and nitrogen-containing polymers and alkali metal salts

The results of investigations of the complexation of polymer ethers and polybases with alkali metal salts in organic solvents are discussed. The influence of different factors as nature of polymers, salts and solvents on the complexation process is considered.     

Solution properties of dendronized poly(hydroxy ethyl methacrylate) polymers

Four generations of dendronized polymers with a methacrylate backbone and hydroxy‐functionalized aliphatic polyester dendrons based on 2,2‐bis(methylol)propionic acid were studied in solutions by rheological measurements, dynamic light scattering, turbidimetry, and ¹H NMR self‐diffusion measurements to reveal the effect of increasing hydrophilicity and molecular size on their solution properties. The studied polymers were interesting new amphiphiles with a hydrophobic main chain and a hydrophilic shell. Evidence of aggregation upon the heating of the first‐generation polymer in an aqueous solution was obtained by dynamic light scattering and turbidimetry, reflecting the effect of the hydrophobic polymer backbone, whereas the higher generation polymers did not show aggregation upon heating. Although the dimensions of the polymers were observed to increase with increasing generation, all the polymers exhibited low viscosities and Newtonian flow behavior in both aqueous and dimethyl sulfoxide solutions. The relative viscosities of the polymers in water and dimethyl sulfoxide showed that the conformation of the polymers was somewhat more open in dimethyl sulfoxide, and this led to higher viscosities than those in water, in agreement with the ¹H NMR diffusion measurements, by which the dimensions were found to be larger for the polymers dissolved in dimethyl sulfoxide. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3674–3683, 2006     

Head-to-head vinyl polymers. V. Preparation and characterization of alternating head-to-head copolymers of alkyl acrylates with alkyl methacrylates

Alternating head-to-head (h-h) copolymers of methyl or n-butyl acrylates with the corresponding methacrylates were synthesized by alternating copolymerization of ethylene with citraconic anhydride, followed by esterification and Characterization. The respective equimolar (1:) head-to-tail (h-t) copolymers were also prepared by conventional radical copolymerization as comparison. The alternating, relatively low molecular weight h-h copolymers obtained showed softening, glass transition, and degradation temperatures somewhat higher than those displayed by the 1:1 h-t copolymers. After pyrolysis the main decomposition products from both h-h and h-t copolymers were alcohols, acrylates, and methacrylates. Furthermore, the ratios of alcohols to acrylates were larger for the h-h than for the h-t copolymers and smaller for the methyl than for the n-butyl esters.     

Redox behavior of pyridinium salts and their polymers having radical stabilizing groups

The redox behavior of pyridinium salts having various substituents capable of stabilizing pyridinyl radicals at the 4-position was investigated by cyclic voltammetry in water with a platinum electrode, and their redox potentials were more positive in the order of 4-substituents of acetyl > cyano > carbomethoxy > carbamide groups. Sodium dithionite was found to be suitable for a chemical reducing agent of the pyridinium salts. Two types of homopolymers with pendant 4-carbamido-pyridinium groups were prepared and their redox potentials were more positive than the corresponding model compounds. The positive shift might be caused by charge repulsion between the neighboring pyridinium cations on the polymer main chain in the oxidized state.     

Solution properties of ultrahigh molecular weight polymers. VII. Conformational characteristics of poly(butyl methacrylate)

The paper is concerned with light scattering studies on solutions of ultrahigh molecular weight poly(butyl methacrylate). The dependence of the radius of gyration and of the second virial coefficient on the weight-average molecular weight of the polymers was established in methyl ethyl ketone, dimethylformamide, and CCl₄. Short-range and long-range interactions were discussed in terms of the steric factor σ, of the interaction parameter B, and of the interpenetration function ψ(z).