"CAGE" VANADYL POLYCARBOXYLATE-THIOUREA COMPLEX FOR THE POLYMERIZATION OF ACRYLONITRILE

The polymerization of acrylonitrile (AN) in aqueous nitric acid initiated by " cage " vanadyl polycarboxylate (P=VO)-thiourea (TU) complex was investigated. The overall rate ofpolymerization isThe relationship between the induction period (τ) and the temperature of polymerization as well as the concentrations of reactants can be expressed as follows :The molecular weight of polyacrylonitrile increases with increasing monomer concentration and decreases with increasing temperature of polymerization and concentrations of vanadyl polycarboxylate and thioureaThe polymerization mechanism was proposed and discussed.     

Solvent effect in the polymerization of e-caprolactone initiated with diethylaluminum ethoxide

Kinetics of ϵ-caprolactone (ϵCL) polymerization initiated with diethylaluminum ethoxide in benzene (C₆H₆) and acetonitrile (CH₃CN) as solvents was studied and compared with the previously studied polymerization conducted in tetrahydrofuran (THF) solvent. Kinetic data were analyzed in terms of the kinetic scheme: “propagation with aggregation,” assuming that actually propagating active species (P_n*) aggregate reversibly into the unreactive (dormant) species . The determined equilibrium constants of deaggregation (K_da) decrease with decreasing solvent polarity, namely K_da (in mol²·L⁻²) = (1.3 ± 0.7)·10⁻² (CH₃CN), (1.8 ± 0.5)·10⁻⁵ (THF), (4.1 ± 0.7)·10⁻⁶(C₆H₆), whereas for the rate constants of propagation the opposite is true, k_p (in mol⁻¹·L·s⁻¹) = (7.5 ± 0.3)·10⁻³ (CH₃CN), (3.87 ± 0.01)·10⁻² (THF), (8.6 ± 0.9)·10⁻² (C₆H₆) (25°C). The latter effect is explained by a specific solvation (the stronger the higher solvent polarity) of the active species already in the ground state in the elementary reaction of the poly(ϵCL) chain growth: C₂H₅[OC(O)(CH₂)₅]_nO(SINGLE BOND)Al(C₂H₅)₂ + ϵCL → C₂H₅[OC(O)(CH₂)₅]_n+1O(SINGLE BOND)Al(C₂H₅)₂. © 1996 John Wiley & Sons, Inc.     

Kinetic studies of polymerization of propylene with active TiCl3–Zn(C2H5)2

In order to elucidate the structure of the Ziegler-Natta polymerization center, we have carried out some kinetic studies on the polymerization of propylene with active TiCl₃—Zn(C₂H₅)₂ in the temperature range of 25–56°C. and the Zn(C₂H₅)₂ concentration range of 4 × 10^?3–8 × 10^?2 mole/1., and compared the results with those obtained with active TiCl₃—Al(C₂H₅)₃. The following differences were found: (1) the activation energy of the stationary rate of polymerization is 6.5 kcal/mole with Zn(C₂H₅)₂ and 13.8 kcal./mole with Al(C₂H₅)₃; (2) the growth rate of the polymer chains with Zn(C₂H₅)₂ is about times slower at 43.5°C.; and (3) the polymerization centers formed with Zn(C₂H₅)₂ are more unstable. It can be concluded that the structure of the polymerization center with Zn(C₂H₅)₂ is different from that with Al(C₂H₅)₃.     

Über Cyanatverbindungen und deren reaktives Verhalten. X. 14N-NMR-Untersuchungen an einigen diamagnetischen Metall- und Triphenylzinnthiocyanatverbindungen sowie Kaliumselenocyanat

Chemical shifts and line-widths of the following soluble diamagnetic ¹⁴N-compounds are given: (NH₄)₂[Hg(SCN)₄], Sr(SCN)₂, K₂[Zn(NCS)₄] · 2 CH₃COCH₃, K₂[Zn(NCS)₄], K₄[Cd(NCS)₆], (C₆H₅)₃SnNCS, C₇H₇NH₃[(C₆H₅)₃Sn(NCS)₂], K[(C₆H₅)₃Sn(NCSe)₂] und KSeCN. Types of bonding of the NCY group (Y = S, Se) in these compounds are discussed and correlated to the measurements. Dependences of the line-widths upon different concentrations and temperatures are given for aqueous KSCN solutions.     

Cyclohexylethynyl complexes of CoII and FeII

This paper deals with the synthesis of six σ-cyclohexylethynyl complexes of Co^II and Fe^II and their characterization by chemical analysis, infrared and ¹H NMR spectra, and magnetic measurements. Four of them are six-coordinate complexes, unsubstituted or substituted, namely K₄[M(C≡C—C₆H₁₁)₆] nNH₃(M = Co, n = 2; M = Fe, n = 0), K₂[Co(C≡C₆H₁₁)₄(NH₃)₂] and K₄[Fe(CN)₄-(C≡C—C₆H₁₁)₂]. Two are four-coordinate complexes of formula [(Ph₃P)₂M-(C≡C₆H₁₁)₂] (M = Co, Fe). All are low-spin complexes, the magnetic moment for the six-coordinate Co(II) complexes, measured at various temperatures, being intermediate between low- and high-spin values.     

Kinetics of metal exchange reaction of Cu(II)-poly(vinyl alcohol) complex with Ca(II)-ethylenediamine-N,N,N′,N′-tetraacetic acid in aqueous solution

The kinetics of the metal exchange reaction between the Cu(II)-poly(vinyl alcohol) complex (Cu(II)-PVA) and Ca(II)-ethylenediamine-N,N,N′,N′-tetraacetic acid (Ca(II)-EDTA) were studied by mixing both solutions in a spectrophotometer at pH 9.7–11.0, at μ = 0.10(KNO₃) and at 25°C. The reaction is initiated by the formation of unstable Cu(II)-H-PVA by the attack of H⁺ to Cu(II)-PVA, and while both ligand exchange and metal exchange steps occur, the latter may be rate-determining. The kinetic expression of this reaction was determined as -d[Cu(II)-PVA]/dt = k[Cu(II)-PVA] [H⁺] [PVA]/[Ca(II)-EDTA], where k = k₁ + k′₂[H⁺], k₁ = 3.85 × 10⁻² sec⁻¹, k₂ = k′₂ · K^−H_Cu(II)-H-PVA 9.59 × 10⁵ 1 mol⁻¹ sec⁻¹.     

Melamine-mediated self-assembly of a Cu(II)–methylmalonate complex assisted by π+–π+ and anti-electrostatic H-bonding interactions

A Cu(II)-methylmalonate complex, (C₃H₇N₆)₄[Cu(II)(C₄H₄O₄)₂](H₂O)₄Cl₂ (1) (where C₃H₇N₆ = protonated melamine, C₄H₄O₄ = methylmalonic acid), has been synthesized from aqueous media and its crystal structure was determined by single-crystal X-ray diffraction. The anionic Cu(II)-methylmalonate complex mediated formation of interesting supramolecular assemblies in the solid state by means of ionic interactions with protonated melamine. Moreover, other forces such as antielectrostatic H-bonding and π⁺–π⁺ interactions also play a crucial role in defining the final 3-D architecture of 1. An interesting stacking among protonated melamine molecules is studied by DFT calculations. Lattice water molecules and chlorides form various hydrogen bonds to take part in the self-assembly processes.     

Dimeric copper(II) trimethylsilyl­acetate adducts with pyridine, 2‐­methylpyridine, 3‐methylpyridine and quinoline,and a polymeric copper(II) trimethylsilylacetate

In the crystals of bis(pyridine‐N)tetrakis(μ‐trimethylsilylacetato‐O:O′)dicopper(II), [Cu₂(C₅H₁₁O₂Si)₄(C₅H₅N)₂], (I), the dinuclear Cu^II complexes have cage structures with Cu?Cu distances of 2.632 (1) and 2.635 (1) Å. In the crystals of bis(2‐­methylpyridine‐N)tetrakis(μ‐trimethylsilylacetato‐O:O′)dicopper(II), [Cu₂(C₅H₁₁O₂Si)₄(C₆H₇N)₂], (II), bis­(3‐methylpyridine‐N)tetrakis(μ‐trimethylsilylacetato‐O:O′)dicopper(II), [Cu₂(C₅H₁₁O₂Si)₄(C₆H₇N)₂], (III), and bis(quinoline‐N)­tetrakis(μ‐­trimethylsilylacetato‐O:O′)dicopper(II), [Cu₂(C₅H₁₁O₂Si)₄(C₉H₇N)₂], (IV), the centrosymmetric dinuclear Cu^II complexes have a cage structure with Cu?Cu distances of 2.664 (1), 2.638 (3) and 2.665 (1) Å, respectively. In the crystals of catena‐poly­[tetrakis(μ‐trimethylsilylacetato‐O:O′)dicopper(II)], [Cu₂(C₅H₁₁O₂Si)₄]_n, (V), the dinuclear Cu^II units of a cage structure are linked by the cyclic Cu—O bonds at the apical positions to form a linear chain by use of a glide translation.     

Univalent Gallium Complexes of Simple and ansa‐Arene Ligands: Effects on the Polymerization of Isobutylene

Using [Ga(C₆H₅F)₂]⁺[Al(OR^F)₄]^?( 1 ) (R^F=C(CF₃)₃) as starting material, we isolated bis‐ and tris‐η⁶‐coordinated gallium(I) arene complex salts of p‐xylene (1,4‐Me₂C₆H₄), hexamethylbenzene (C₆Me₆), diphenylethane (PhC₂H₄Ph), and m‐terphenyl (1,3‐Ph₂C₆H₄): [Ga(1,4‐Me₂C₆H₄)_2.5]⁺ ( 2⁺ ), [Ga(C₆Me₆)₂]⁺ ( 3⁺ ), [Ga(PhC₂H₄Ph)]⁺ ( 4⁺ ) and [(C₆H₅F)Ga(μ‐1,3‐Ph₂C₆H₄)₂Ga(C₆H₅F)]²⁺ ( 5²⁺ ). 4⁺ is the first structurally characterized ansa‐like bent sandwich chelate of univalent gallium and 5²⁺ the first binuclear gallium(I) complex without a Ga?Ga bond. Beyond confirming the structural findings by multinuclear NMR spectroscopic investigations and density functional calculations (RI‐BP86/SV(P) level), [Ga(PhC₂H₄Ph)]⁺[Al(OR^F)₄]^?( 4 ) and [(C₆H₅F)Ga(μ‐1,3‐Ph₂C₆H₄)₂Ga(C₆H₅F)]²⁺{[Al(OR^F)₄] ^?}₂ ( 5 ), featuring ansa‐arene ligands, were tested as catalysts for the synthesis of highly reactive polyisobutylene (HR‐PIB). In comparison to the recently published 1 and the [Ga(1,3,5‐Me₃C₆H₃)₂]⁺[Al(OR^F)₄]^? salt ( 6 ) (1,3,5‐Me₃C₆H₃=mesitylene), 4 and 5 gave slightly reduced reactivities. This allowed for favorably increased polymerization temperatures of up to +15 °C, while yielding HR‐PIB with high contents of terminal olefinic double bonds (α‐contents=84–93 %), low molecular weights (M_n=1000–3000 g mol^?1) and good monomer conversions (up to 83 % in two hours). While the chelate complexes delivered more favorable results than 1 and 6 , the reaction kinetics resembled and thus concurred with the recently proposed coordinative polymerization mechanism.     

Halfsandwich Carbonylmetal Complexes of Vanadium,Chromium, and Manganese Containing Tri(1‐cyclohepta‐2, 4, 6‐trienyl)phosphane,P(C7H7)3

The photo‐induced substitution of a CO ligand has been used to prepare the halfsandwich complexes (η³‐C₃H₅)V(CO)₄[P(C₇H₇)₃] ( 1 ), (η⁵‐C₅H₅)V(CO)₃[P(C₇H₇)₃] ( 2 ), (η⁷‐C₇H₇)V(CO)₂[P(C₇H₇)₃] ( 3 ), (η⁶‐C₆H₃Me₃)Cr(CO)₂[P(C₇H₇)₃] ( 4 ), and (η⁵‐C₅H₅)Mn(CO)₂[P(C₇H₇)₃] ( 7 ), in which the olefinic phosphane is coordinated as a conventional two‐electron ligand through the lone pair of electrons at phosphorus. Some analogues, which are permethylated at the aromatic ring ( 2* , 4* , 7* ), were included for comparison. Subsequent photo‐elimination of another CO group from 4 or 7 converts the olefinic phosphane into a chelating four‐electron ligand, leading to (η⁶‐C₆H₃Me₃)Cr(CO)[P(C₇H₇)₂(η²‐C₇H₇)] ( 5 ) and (η⁵‐C₅H₅)Mn(CO)[P(C₇H₇)₂(η²‐C₇H₇)] ( 8 ), respectively. The η²‐coordinated double bond in 5 and 8 can be displaced by trimethylphosphite to give (η⁶‐C₆H₃Me₃)Cr(CO)[P(C₇H₇)₃][P(OMe)₃] ( 6 ) and (η⁵‐C₅H₅)Mn(CO)[P(C₇H₇)₃][P(OMe)₃] ( 9 ). The ³¹P and ¹³C NMR spectra of all complexes are discussed, and X‐ray structure analyses for 2 and 8 are presented. Prolonged irradiation of 7 and 8 led to a di(cycloheptatrienyl)phosphido‐bridged dimer, {(η⁵‐C₅H₅)Mn(CO)[P(C₇H₇)₂]}₂( 10 ).     

Über die Ammonolyse von Organometallen. XI. Die Ammonolyse von Diphenylbleijodid, — Bildung von Kaliumhexaamidoplumbat (IV)

The reaction of (C₆H₅)₂PbJ₂ (I) in liquid NH₃ with KNH₂ has been investigated. It results in the formation of K₂[Pb(NH₂)₆] (II). As intermediates could be isolated: (C₆H₅)₂PbJ₂ · 3NH₃ (III), (C₆H₅)₂PbNH (V) and K₂[(C₆H₅)₂Pb(NH₂)₄] (VIII).     

Synthesis and spectral studies of new N2S2 and N2O2 Mannich base ligands and their metal complexes

New Mannich bases bis(thiosemicarbazide methyl) phosphinic acid H₃L¹ and bis(1-phenylsemicarbazide methyl) phosphinic acid H₃L² were synthesized from condensation of phosphinic acid and formaldehyde with thiosemicarbazide and 1-phenylsemicarbazide, respectively. Monomeric complexes of these ligands, of general formula K₂[Cr^III(L ⁿ )Cl₂], K₃[Fe^II(L¹)Cl₂], K₃[Mn^II(L²)Cl₂], and K[M(L ⁿ )] (M = Co(II), Ni(II), Cu(II), Zn(II) or Cd(II); n = 1, 2) are reported. The mode of bonding and overall geometry of the complexes were determined through IR, UV-Vis, NMR, and mass spectral studies, magnetic moment measurements, elemental analysis, metal content, and conductance. These studies revealed octahedral geometries for the Cr(III), Mn(II), and Fe(II) complexes, square planar for Co(II), Ni(II), and Cu(II) complexes and tetrahedral for the Zn(II) and Cd(II) complexes. Complex formation via molar ratio in DMF solution has been investigated and results were consistent to those found in the solid complexes with a ratio of (M : L) as (1 : 1).     

STUDY ON THE POLYMERIZATION OF ACRYLONITRILE INITIATED BY POLYPROPYLENE-BASED VANADYL POLYIMIDODIACETATE——THIOUREA REDOX SYSTEM

The present paper deals with the kinetics of polymerization of acrylonitrile (AN) initialed by the redox system of polypropylene-based vanadyi polyimidodiacetate (PV)-thiourea (TU)in aqueous sulfuric acid in the temperature range from 25 to 40℃. The polymerization rate was measured by varying the concentrations of monomer, vanadyl polyimidodiacetate, thiourea and sulfuric acid. The overall rate of polymerization was summarized asRp=2.2×10~5e~(-6.560/RT) [AN]~(1.0)[PV]~(0.50)[TU]~(1.5)[H_2SO_4]~(2.0)The molecular weight of polyacrylonitrile based on the experimental data was:(?)=k 1/T [pv]~(0.50)[TU]~(1.5)[H_2SO_4]~(2.0)These results indicated that the chain radicals are terminated by combination and/or disproportionation rather than chain transfer. The cooperation effect of carboxylic groups and the macromolecular field effect of polymer supporter are the characters of vanadyl polyimidodiacetate such as the case reported in early paper.     

Azametalla-closo-dodecaboranes

The azaborate K₂[nido-NB₁₀H₁₁] is gained from nido-NB₁₀H₁₃ and K[BHEt₃] in a 1:2 ratio. The anion [NB₁₀H₁₁]^2?, which is isoelectronic with [C₂B₉H₁₁]^2?, reacts with [{η⁶-(C₆R₆) · RuCl₂}₂] (R = H, Me), [{η⁵-(C₅Me₅)RhCl₂}₂], or [Ni(PPh₃)₂Cl₂] to give the azametalla-closo-dodecaboranes MNB₁₀H₁₁ with M = (C₆Me₆)Ru ( 2 ), (C₆H₆)Ru ( 3 ), (C₅Me₅)Rh ( 4 ), and (Ph₃P)₂Ni ( 5 ), respectively. The azametallaborane K[Co(NB₁₀H₁₁)₂] ( 6 ), which contains a sandwich-type coordinated Co atom, is formed from K₂[NB₁₀H₁₁] and CoCl₂. The structure of 2 · CH₂Cl₂ was determined by X-ray diffraction. The products 2 – 6 can be derived from the icosahedral anion [B₁₂H₁₂]^2? on replacing a BH^2? moiety by the isoelectronic nitrene NH and a BH moiety by the isolobal metal-complex fragment M. The N atom is six-coordinated in the cluster skeletons 2 – 6 .     

Determination of the thermodynamic parameters,stoichiometry, and stability constants for complex formation of dicyclohexyl-18-crown-6 and 15-crown-5 with Y3+, La3+, and Hg2+ cations in binary solutions

The complexation of Y³⁺, La³⁺, and nd Hg²⁺ cations with macrocyclic ligands, dicyclohexyl-18-crown-6 (DCH18C6) and 15-crown-5 (15C5) have been studied in acetonitrile (AN)-N,N-dimethylformamide (DMF) binary solutions at different temperatures using conductometric method. The conductance data revealed 1: 1 [ML] stoichiometry for most complexes in pure DMF and AN-DMF binary solutions, except for the (DCH18C6-Y³⁺) complex in pure AN (1: 2, [ML₂]). The stability constants of DCH18C6-La³⁺ and 15C5-La³⁺ in pure AN were higher than in pure DMF at all temperatures. Nonlinear behavior was observed for the stability constants of complexes against the composition of AN-DMF binary solutions at all temperatures. The minimum log K _f value for the 15C5-La³⁺ complex in AN-DMF binary solutions was obtained at χ_AN = 0.5, which may be due to negative excess viscosities η^E of AN-DMF mixtures over the whole composition range with a minimum value of χ_AN = 0.5. Moreover, the selectivity order of DCH18C6 and 15C5 for Y³⁺, La³⁺, and Hg²⁺ cations 25°C depended on the AN-DMF ratio. The thermodynamic parameters (ΔH _C ⁰ ) for complex formation were obtained from the temperature dependences of the stability constants of the complexes using the van’t Hoff plots, and the standard entropy (ΔS _C ⁰ ) was calculated from the relationship: ΔG _{C, 298.15} ⁰ = ΔH _C ⁰ ? 298.15ΔS _C ⁰ .     

Mass spectra of some platinum clusters. Electron impact and field desorption studies of Ptn(CO)m(PR3)p complexes

The compounds Pt₃(CO)₃[P(C₆H₅)₃]₄ molecular weight 1717, Pt₄(CO)₅[P(C₆H₅)₃]₄ molecular weight 1968 and Pt₅(CO)₆[P(C₂H₅)₃]₄ molecular weight 1615 are thermally labile and are slowly solvolysed by tetrahydrofuran and acetone. They cannot be analysed by means of electron impact. Field desorption, however, shows the molecular ion and [M? xCO]⁺˙ peaks.     

Reactivity Studies of η5‐ Indenyl and η5‐Cp* Ruthenium(II) Complexes towards some Polypyridyl Ligands

The reaction of [(η⁵‐L³)Ru(PPh₃)₂Cl], where; L³ = C₉H₇ ( 1 ), C₅Me₅ (Cp*) ( 2 ) with acetonitrile in the presence of [NH₄][PF₆] yielded cationic complexes [(η⁵‐L³)Ru(PPh₃)₂(CH₃CN)][PF₆]; L³= C₉H₇ ([3]PF₆) and L³ = C₅Me₅ ([4]PF₆), respectively. Complexes [3]PF₆ and [4]PF₆ reacts with some polypyridyl ligands viz, 2,3‐bis (α‐pyridyl) pyrazine (bpp), 2,3‐bis (α‐pyridyl) quinoxaline (bpq) yielding the complexes of the formulation [(η⁵‐L³)Ru(PPh₃)(L²)]PF₆ where; L³ = C₉H₇, L² = bpp, ([5]PF₆), L³ = C₉H₇, L² = bpq, ([6]PF₆); L³ = C₅Me₅, L² = bpp, ([7]PF₆) and bpq, ([8]PF₆), respectively. However reaction of [(η⁵‐C₉H₇)Ru(PPh₃)₂(CH₃CN)][PF₆] ([3]PF₆) with the sterically demanding polypyridyl ligands, viz. 2,4,6‐tris(2‐pyridyl)‐1,3,5‐triazine (tptz) or tetra‐2‐pyridyl‐1,4‐pyrazine (tppz) leads to the formation of unexpected complexes [Ru(PPh₃)₂(L²)(CH₃CN)][PF₆]₂; L² = tppz ([9](PF₆)₂), tptz ([11](PF₆)₂) and [Ru(PPh₃)₂(L²)Cl][PF₆]; L² = tppz ([10]PF₆), tptz ([12]PF₆). The complexes were isolated as their hexafluorophosphate salts. They have been characterized on the basis of micro analytical and spectroscopic data. The crystal structures of the representative complexes were established by X‐ray crystallography.     

Kinetic studies and mechanism of triiron dodecacarbonyl reactions : I. Nucleophilic substitution in triiron dodecacarbonyl by triphenylphosphine in benzene

The kinetics of the reaction of triiron dodecacarbonyl with triphenylphosphine has been studied at various temperatures and different concentrations. It is a first order reaction with respect to Fe₃(CO)₁₂. P(C₆H₅)₃ reacts with Fe₃(CO)₁₂ according to the expression K_obsd = K[Fe₃(CO)₁₂] + K[P(C₆H₅)₃]/ [Fe₃(CO)₁₂]. Up to a certain ratio of P(C₆H₅)₃ to Fe₃(CO)₁₂ (approx. 10/1), after which K_obsd deviates from the above expression. K_obsd also depends upon the concentrations of both the reactants. An induction period is always observed which decreases with increase in temperature. Thermodynamic parameters for the reaction have also been calculated.     

Unusual 4‐arsonoanilinium cationic species in the hydrochloride salt of (4‐aminophenyl)arsonic acid and formed in the reaction of the acid with copper(II) sulfate,copper(II) chloride and cadmium chloride

Structures having the unusual protonated 4‐arsonoanilinium species, namely in the hydrochloride salt, C₆H₉AsNO₃⁺·Cl⁻, (I), and the complex salts formed from the reaction of (4‐aminophenyl)arsonic acid (p‐arsanilic acid) with copper(II) sulfate, i.e. hexaaquacopper(II) bis(4‐arsonoanilinium) disulfate dihydrate, (C₆H₉AsNO₃)₂[Cu(H₂O)₆](SO₄)₂·2H₂O, (II), with copper(II) chloride, i.e. poly[bis(4‐arsonoanilinium) [tetra‐μ‐chlorido‐cuprate(II)]], {(C₆H₉AsNO₃)₂[CuCl₄]}_n , (III), and with cadmium chloride, i.e. poly[bis(4‐arsonoanilinium) [tetra‐μ‐chlorido‐cadmate(II)]], {(C₆H₉AsNO₃)₂[CdCl₄]}_n , (IV), have been determined. In (II), the two 4‐arsonoanilinium cations are accompanied by [Cu(H₂O)₆]²⁺ cations with sulfate anions. In the isotypic complex salts (III) and (IV), they act as counter‐cations to the {[CuCl₄]²⁻}_n or {[CdCl₄]²⁻}_n anionic polymer sheets, respectively. In (II), the [Cu(H₂O)₆]²⁺ ion sits on a crystallographic centre of symmetry and displays a slightly distorted octahedral coordination geometry. The asymmetric unit for (II) contains, in addition to half the [Cu(H₂O)₆]²⁺ ion, one 4‐arsonoanilinium cation, a sulfate dianion and a solvent water molecule. Extensive O—H…O and N—H…O hydrogen bonds link all the species, giving an overall three‐dimensional structure. In (III), four of the chloride ligands are related by inversion [Cu—Cl = 2.2826 (8) and 2.2990 (9) Å], with the other two sites of the tetragonally distorted octahedral CuCl₆ unit occupied by symmetry‐generated Cl‐atom donors [Cu—Cl = 2.9833 (9) Å], forming a two‐dimensional coordination polymer network substructure lying parallel to (001). In the crystal, the polymer layers are linked across [001] by a number of bridging hydrogen bonds involving N—H…Cl interactions from head‐to‐head‐linked As—O—H…O 4‐arsonoanilinium cations. A three‐dimensional network structure is formed. Cd^II compound (IV) is isotypic with Cu^II complex (III), but with the central CdCl₆ complex repeat unit having a more regular M —Cl bond‐length range [2.5232 (12)–2.6931 (10) Å] compared to that in (III). This series of compounds represents the first reported crystal structures having the protonated 4‐arsonoanilinium species.     

Anionic polymerization of MMA and renewable methylene butyrolactones by resorbable potassium salts

Three resorbable potassium salts of hydride (K[H]), enolate Me₂C?C(OⁱPr)OK (K[E]), and allyl K[1,3‐(SiMe₃)₂C₃H₃] (K[A]) have been investigated for controlled anionic polymerization of methyl methacrylate (MMA) and its cyclic analogs, naturally renewable methylene butyrolactones including α‐methylene‐γ‐butyrolactone (MBL) and γ‐methyl‐α‐methylene‐γ‐butyrolactone (MMBL). When used alone at ambient temperature in toluene, these salts exhibit no (K[H]) to low (K[A]) to modest (K[E]) polymerization activity. Mixing of K[H] and Al(C₆F₅)₃ leads to the formation of an “ate” complex, K⁺[HAl(C₆F₅)₃]^?, which has been structurally characterized by X‐ray diffraction; this complex has a high polymerization activity producing atactic PMMA, but addition of another equiv of Al(C₆F₅)₃ further enhances both the rate and the efficiency of the polymerization, now producing syndiotactic PMMA with a narrow molecular weight (MW) distribution of 1.04. The K[H]/2Al(C₆F₅)₃ system also exhibits high activity for polymerization of (M)MBL. In sharp contrast, addition of Al(C₆F₅)₃ to K[A] shuts down the polymerization at various temperatures. The most active, controlled, and syndioselective polymerization system in this series is K[E]/2Al(C₆F₅)₃. Accordingly, the polymerization control and kinetics of this most effective system have been examined in more detail. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011