胆固醇分子印迹聚合有机凝胶的制备及其选择性吸附研究

以N-十八烷基马来酰胺酸(ODMA)为凝胶剂,在甲基丙烯酸β-羟乙酯、甲基丙烯酸、聚乙二醇二甲基丙烯酸酯和模板分子3-胆固醇酰氧基丙酸(COPA)混合物中自组装形成稳定的超分子有机凝胶,经UV原位光聚合,乙腈提取模板分子制备了胆固醇非共价印迹聚合有机凝胶.吸附实验在水/THF中进行.结果显示胆固醇非共价印迹聚合有机凝胶...     

胆固醇分子印迹的聚合有机凝胶及其吸附性能研究

报道了一种新型胆固醇分子印迹的聚合有机凝胶.以3-胆固醇酰氧基丙酸(COPA)为模板分子,通过可聚合凝胶剂N-十八烷基马来酰胺酸(ODMA)在甲基丙烯酸β-羟乙酯、甲基丙烯酸和聚乙二醇二甲基丙烯酸酯混合溶液的自组装,首先形成稳定的超分子有机凝胶,经UV光引发原位聚合,再经乙醇提取模板分子后制得胆固醇非共价印迹的聚合有机凝胶.偏光显微镜(POM)和场发射扫描电镜(FE-SEM)表明ODMA在单体混合物中自组装形成带状聚集体,这为其后形成的印迹聚合有机凝胶的孔穴稳定性提供了保证.印迹聚合有机凝胶对胆固醇的吸附效率可达到64%,并与ODMA和COPA的含量有关.实验表明,当ODMA的含量由1wt%增加到3 wt%时,吸附量由15.7 mg/g增加到22.9 mg/g.当COPA的含量由4 wt%增加到7 wt%时,吸附量由16.8 mg/g增加到22.2 mg/g.然而,当ODMA含量过多时,吸附量反而下降,这主要归因于体系网络密度的增加导致扩散阻力增加.而COPA含量过多时,可能干扰ODMA的自组装,影响印迹孔穴的稳定性,同样使得吸附量下降.     

DNOP磁性分子印迹聚合物的制备及其表征

以磁性Fe_3O_4为载体,邻苯二甲酸二正辛酯(DNOP)为模板,α-甲基丙烯酸为单体,乙二醇二乙基丙烯酸酯为交联剂,偶氮二异丁腈为引发剂,通过悬浮聚合的方法制备了DNOP磁性分子印迹聚合物。通过红外光谱和扫描电镜等对聚合物的结构和形态进行了表征,结合气相色谱(GC-FID检测器)技术考察了磁性印迹聚合物对DNOP的吸附性能。通过正交实验表明,当反应在70℃、模板:单体:交联剂=1∶6∶30、引发剂占单体和交联剂总质量的2.5%的条件下,该磁性印迹聚合物对DNOP的饱和吸附量为1.82 mg g~(-1)。等温吸附实验表明,该磁性分子印迹聚合物对DNOP有较好的吸附性能。     

L-组氨酸手性识别印迹固定相的制备及表征

以L-组氨酸为模板分子, 甲基丙烯酸为功能单体, 乙二醇二甲基丙烯酸酯为交联剂, 偶氮二异丁腈为引发剂, 在水-乙腈微乳体系中采用沉淀聚合方法制备了具有手性识别L-组氨酸功能的印迹微球. 采用静态平衡吸附实验及色谱分析探讨聚合微球对模板分子的选择识别吸附性能. 结果表明, 该印迹聚合物微球对模板分子存在两种结合位点, 最大表观结合量分别为33.04和24.16 μmol/g. 相对于常规的C18柱, 该印迹聚合物填充柱能够完全分离L-组氨酸和D-组氨酸, 分离度R为2.23, 选择因子为2.14. 利用差热分析、红外光谱及X射线衍射等技术表征聚合物微球的热性能及结构. 结果表明, 聚合物微球具有良好的热稳定性, 是一种具有部分晶体结构的聚合物.     

鞣花酸分子印迹聚合物的合成及其性能研究

以鞣花酸为模板分子,4-乙烯基吡啶(4-VP)为功能单体,二甲基丙烯酸乙二醇酯(EDMA)为交联剂,通过沉淀聚合法合成鞣花酸(EA)分子印迹聚合物(MIPs).采用红外光谱、比表面积测定、扫描电镜、静态吸附试验、选择性吸附试验对其结构和性能进行表征.结果表明:最佳制备条件为聚合温度65℃,以70 mL二甲基亚砜为致孔剂...     

核-壳型赤藓红分子印迹聚合物的制备及吸附性能的评价

以氨基化修饰的SiO_2为内核,人工合成色素赤藓红为模板,甲醇/水为溶剂,4-乙烯基吡啶为功能单体,二甲基丙烯酸乙二醇酯为交联剂,偶氮二异丁腈为引发剂,采用表面印迹技术,制备核-壳型赤藓红分子印迹聚合物。通过红外光谱对其结构进行表征,并通过动力学吸附、等温饱和吸附和实际样品加标实验对其吸附性能进行评价。结果表明,核-壳型赤藓红分子印迹聚合物具有较快的吸附能力,在15min左右达到吸附平衡,有较好的吸附容量,能够从复杂的食品样品中选择性吸附模板,且回收可达85%。     

烟酸分子印迹聚合物的制备及分子识别性能的研究

以烟酸(NA)为模板分子、4-乙烯基吡啶(4-VP)为功能单体、二甲基丙烯酸乙二醇酯(EGDMA)为交联剂、偶氮二异丁腈(AIBN)为引发剂,分别采用本体聚合法和溶胀聚合法制备了分子印迹聚合物MIP1及MIP2.静态平衡结合实验表明,MIP1、MIP2对NA的结合量Q分别为193.56、215.35 μmol/g,均大...     

咪草烟分子印迹聚合物的制备及其选择性吸附性能的研究

以丙烯酸为聚合单体,TMPTA为交联剂,AIBN为引发剂,咪草烟为模板分子,采用在低温光聚合的方法,制备了对咪草烟分子具有选择性识别能力的分子印迹聚合物．通过IR和HPLC表征,咪草烟分子印迹聚合物对咪草烟分子具有良好的识别作用．     

分子模拟辅助设计L-苯丙氨酸分子印迹聚合物及其性能研究

对L-苯丙氨酸(L-Phe)为模板分子、分别以氯化1-羧甲基-3-乙烯基咪唑鎓([VIM]Cl)、甲基丙烯酸(MAA)和4-乙烯基吡啶(4-VP)为功能单体,二甲基丙烯酸乙二醇酯(EGDMA)为交联剂的分子印迹组装体系进行分子模拟分析、荧光光谱分析,预测较优功能单体,辅助设计了L-苯丙氨酸分子印迹聚合物(L-MIPs);其次,通过实验系统研究了功能单体种类对L-MIPs的吸附性能和印迹因子的影响,并比较了分别以[VIM]Cl、MAA和4-VP为功能单体制备的L-MIPs的吸附行为,运用多种表征方法对L-MIPs形貌、表面元素组成、热稳定性进行了研究。结果表明,以[VIM]Cl为最优功能单体,且制备的聚合物在300℃内具有较好的热稳定性,在浓度为1. 0mg/m L时,饱和吸附量可达33mg/g,印迹因子可达3. 86。相对于结构类似物D-Phe、L-His或L-Trp,识别因子β分别达到1. 24,1. 41和1. 30。因此,采用计算机模拟的方法对于分子印迹体系的功能单体的筛选及MIPs性能的预测有重要的意义。     

复合分子印迹聚合物体系选择性富集蛋白质样品中的溶菌酶

考察了功能单体与模板蛋白的反应摩尔比、溶液pH值及离子强度对功能单体与模板蛋白之间相互作用的影响, 得出制备分子印迹聚合物的最佳条件. 在最佳条件下, 以溶菌酶(Lyz)为模板分子, 丙烯酰胺(AA)和N,N’-亚甲基双丙烯酰胺(BisAA)为聚合基质, 二氧化硅为固体制孔剂, 制备了复合分子印迹聚丙烯酰胺凝胶, 并用平衡吸附实验研究了其吸附性能和识别选择性. 研究结果表明, 该聚合物对模板蛋白有较高的亲和性、选择性和吸附容量,可以从蛋白质混合溶液中分离富集模板分子.     

Self-assembly of gelators confined within the nano-scale interlayer space of organo-montmorillonite

The self-assembly of low molecular weight gelators confined within the nano-scale interlayer space of organo-montmorillonite is likely to be different from that under normal conditions (bulk space). Four kinds of gelators, 1-methyl-2,4-bis(N'-n-octadecylureido) benzene (MBB18), 1-methyl-2,4-bis(N'-n-dodecylureido)benzene (MBB12), bis(4'-stearamido phenyl) methane (BSM18) and bis(4'-octanamido phenyl)methane (BOM8), were used to investigate gelation of organic solvents confined within the nano-scale interlayer space of organo-montmorillonite. The possible morphologies of these gelators aggregates confined within the nano-scale space of organo-montmorillonite will be discussed in comparison with that in bulk space by employing differential scanning calorimetry (DSC) and X-ray diffraction (XRD). Herein, two types of organogels were prepared under the same conditions. One of them was formed within the interlayer space of organo-montmorillonite and another was formed in bulk space. The XRD patterns confirm that self-assembly of gelators takes place via an unusual pathway within the confined interlayer space of organo-montmorillonite, indicating that the alkyl chains of gelators adopt a parallel arrangement and do not insert into each other. This unusual arrangement of gelators confined within the interlayer space of organo-montmorillonite does lead to the different thermal effect observed by the DSC measurements. These features ultimately strengthen the thermodynamic stability of gelator aggregates, for example MBB18, and raise the gel-to-sol transition temperature, which jumps from 60 to 123 degrees C.     

Solvent-induced textural changes of as-synthesized mesoporous alumina, as reported by spin probe electron spin resonance spectroscopy

The effect of solvent used during the synthesis and postsynthesis treatment on textural properties of organized mesoporous aluminas was investigated and related to the behavior of spin probes studied by electron spin resonance (ESR) spectroscopy. It was found that the structure of surfactant aggregates serving in the as-synthesized precipitates as templates could be easily modified by treatment with different solvents. This treatment induces corresponding variations in surface areas, mesopore volumes, and mesopore diameters of the final products. The ESR spectrum of 5-doxyl stearic acid spin probe properly reflects the changes in template structure based on changes of the solvent used and represents an early indicator of the corresponding textural modifications of the mesoporous alumina.     

Chiral Resolution of Racemic 4-Phenyl(benzyl)-2-Oxazolidone by Use of Molecularly Imprinted Polymers

Polymers imprinted with (S)-4-phenyl-2-oxazolidone and (S)-4-benzyl-2-oxazolidone have been prepared by non-covalent imprinting. A combinational procedure was used to optimize the functional monomer and crosslinker. A copolymer of methacrylic acid and divinylbenzene resulted in the best chiral recognition. The ratio of template to functional monomer and solvent in the pre-polymerization mixture were also optimized. The imprinted polymers were used as stationary phases in high-performance liquid chromatography. The MIPs were more selective when prepared using a less polar solvent, except for toluene. Effective separations of the enantiomers of racemic 4-phenyl-2-oxazolidone and 4-benzyl-2-oxazolidone were achieved by use of acetonitrile as mobile phase; no cross-selectivity was observed. Interactions between functional monomers and template were investigated by ¹H NMR spectroscopy. The results suggest that hydrogen-bonding between the functional monomer and the template and π–π stacking interaction between the cross-linker and the template may contribute to chiral recognition.     

A Systematic Study of the Use of DL-Tartaric Acid in the Synthesis of Silica Materials Obtained by the Sol-Gel Method

DL-tartaric acid was used as a template for the formation of silica nanotubes and spheres by the sol-gel method from tetraethylorthosilicate (TEOS) as silica source. The reactions were carried out in ethanol/water mixtures in the presence of aqueous ammonia, between 0°C and 75°C, using both stirred and non-stirred conditions. TEM and SEM images show that the yield and microstructure of the silica is influenced by the synthetic conditions (temperature, ammonia (aq) concentration, gelation time, solvent mixture). It was observed that the chiral form of the tartaric acid used and the diffusion of TEOS to the template determines the eventual silica structure.     

Fractal Morphology and Breakage of DLCA and RLCA Aggregates

Latex aggregates, formed in 1 M McIlvaine buffer solution and 0.2 M NaCl solution, have been characterized in terms of aggregate size distribution and fractal morphology. This was achieved using three sizing techniques (image analysis, laser scattering, and electrical sensing) in which size distributions and fractal properties of the aggregates were measured. Estimates of fractal dimensions were made using the two-slope method based on dimensional analysis and the small-angle light scattering method. Aggregate suspensions were prepared using both water and a mixture of heavy water/ water as the solvent. The latter essentially eliminated sedimentation, which was observed after one day of aggregation when water alone was used as a solvent. Latex aggregates formed by diffusion-limited colloid aggregation (DLCA) and reaction-limited colloid aggregation (RLCA) had fractal dimensions close to 1.8 and 2.1, respectively. As observed through image analysis, DLCA aggregates possessed a loose tenuous structure, whereas RLCA aggregates were more compact. Disruption of both DLCA and RLCA aggregates has been investigated in laminar flow and turbulent capillary flow. The shear forces introduced by a laminar shear device with a shear rate up to 1711 s(-1) were unable to bring about aggregate breakup; shearing facilitates aggregate growth in the case of DLCA. However, latex aggregates were significantly disrupted after passage through a turbulent capillary tube at 95209 s(-1). Copyright 2000 Academic Press.     

Hierarchical self-assembly of surfactant-encapsulated and organically grafted polyoxometalate complexes

A series of surfactant-encapsulated and organically grafted polyoxometalates (SEOPs) were prepared through a co-precipitation procedure. Through a rational selection of the molecular components in the structure of the complex, SEOP complexes self-assemble into ordered aggregates with two different hierarchical self-assembled structures in an organic solvent mixture of dichloromethane and methanol in different volume ratios. FTIR, (1)H NMR, and X-ray photoelectron spectroscopy were used to characterize the self-assembly process and the involved driving forces. In a weakly polar solvent, SEOPs aggregated into fibers with a lamellar structure. When the solvent polarity was increased, SEOPs formed ribbonlike aggregates with a tetragonal structure. The change of the hierarchical self-assembled structure was deduced in regard to the arrangement of alkyl chains, electrostatic interactions, and hydrogen bonding between the pyridyl groups and terminal oxygen atoms of the polyoxometalates. The ribbonlike aggregates exhibit birefringence due to the ordered arrangement of SEOPs in the microstructure.     

苏丹红I分子印迹聚合物的制备及其性能评价

以苏丹红I为模板分子,通过沉淀聚合法制备了一种对苏丹红I具有特异性吸附的分子印迹聚合物。通过选择性评价和前沿色谱实验,评价了致孔剂的选择和用量、功能单体和模板分子的物质的量比对分子印迹聚合物识别性能的影响。实验结果表明: 当以甲醇和乙腈的混合液(体积比为30:10)为致孔剂,甲基丙烯酸(MAA)为功能单体,且功能单体和模板分子的物质的量比为8:1时,分子印迹聚合物的印迹因子为2.32,亲和位点总数(Bt)为0.50 μmol/g;将其作为固相萃取柱填料用于辣椒粉样品中痕量苏丹红I的净化和富集,结果表明: 苏丹红I浓度在10～500 μmol/L范围内时,呈现良好的线性关系(r=0.999);检出限为3.3 μmol/L,加标回收率为95.87%～98.41%,相对标准偏差低于3.1%。该方法有望用于辣椒粉样品中苏丹红I添加剂的常规检测。     

Binding properties of 2,4,5-trichlorophenoxyacetic acid-imprinted polymers prepared with different molar ratios between template and functional monomer

Several molecularly-imprinted polymers binding the herbicide 2,4,5-trichlorophenoxyacetic acid (2,4,5-T) were prepared with a molar ratio between the functional monomer and the template molecule in the pre-polymerisation mixture set between 1+2 and 20+1. The functional monomer used was 4-vinylpyridine (4-VP), the cross-linker was ethylene dimethacrylate, and the porogenic solvent was a mixture of methanol–water 3+1 (v/v). The polymers obtained were grinded, sieved and packed in 100 mm×3.9 mm HPLC columns. The effects of the mobile phase composition were evaluated by eluting the columns with acetonitrile–water mixtures. The results obtained indicate that column capacity, selectivity factor and the imprinting effect are controlled by ion-pair and hydrophobic interactions between the analyte and the stationary phase. In the full range of ratios considered, column capacity, selectivity factor and imprinting effect are inversely proportional to the molar ratio between the template molecule and the functional monomer.     

微环境对长链香豆素酯光化学和光物理过程的影响

疏水作用在胶束、膜的形成以及生命过程中起着重要的作用．疏水作用可促使长链分子相互簇集,造成局部浓度效应和分子的有序排列［１～３］,疏水作用对光化学和光物理过程的影响是一种微环境效应．本文合成了十六酸和十八酸－４－甲基－７－羟基香豆素酯,研究了它们在有...