杯芳烃超分子对甲醇的识别机理分析及应用

采用四种杯芳烃超分子化合物为吸附涂层物质, 探讨了涂膜石英晶体微天平(QCM)传感方法对环境大气中微量甲醇气体的识别研究, 发现RCT(Resorcinol cyclic tetramer)是对甲醇气体识别最有效的活性涂层材料. 通过RCT-MeOH单晶体的制备并对其进行X-ray衍射结构解析, 发现其识别机制是基于甲醇分子中的甲基与杯芳烃化合物的苯环之间形成了C-H…π键作用. 当RCT涂层质量为28.16 μg时, 涂膜QCM传感器对甲醇的响应最灵敏, 达到0.01245 Hz/ppm. 该传感器对甲醇气体吸附和解吸附的初速度分别为－0.2110 Hz/s和0.09497 Hz/s. 该方法具有响应快、重现性和稳定性好的优点, 对甲醇测定的回收率在97.83%～103.66%之间, 与气相色谱法测定结果一致, 表明该方法可应用于环境大气中甲醇气体含量的检测.     

杯[4]芳烃对单糖及嘧啶衍生物的分子识别和分子开关

用AM1和INDO/SCI方法对八羟基杯[4]芳烃与单糖及嘧啶衍生物形成的超分子体系进行理论研究,结果表明,主体通过CH-π相互作用对单糖类进行分子识别,尤其对赤藓糖识别效果更好;主体与嘧啶没有明显的π-π堆砌作用,但能识别含吸电子基团的嘧啶衍生物,据此可设计酸碱调控的分子开关.讨论了配合物的UV谱带与主体相比发生红移的原因.     

超支化敏感聚合物基于QCM检测痕量TNT爆炸物

为对TNT类爆炸物进行痕量检测,以石英晶体微天平(QCM)传感器为平台,用具有氢键酸性的氟化醇为敏感端基的超支化敏感聚合物材料构造了化学传感器。制备的QCM传感器可以在室温下对2.2×10~(-10)mol/L浓度以上的TNT气体进行响应;连续循环检测3次TNT气体未见信号衰减;对H_2O、乙醇、H_2、H_2S、SO_2、甲烷和NO_2等气体有良好的抗干扰能力;QCM传感器可以用于对TNT类爆炸物的痕量检测。     

介孔结构CeO2对丙酮的敏感响应研究

采用水热法一步合成制备了一种多面体介孔结构CeO₂,并用于有机挥发性气体的检测。利用扫描电子显微镜(SEM)和透射电子显微镜(TEM)观察形貌、尺寸和结构,X射线衍射(XRD)、拉曼光谱(Raman)和X射线光电子能谱(XPS)分析其晶体结构和化学成分,利用全自动气体吸附分析仪分析其孔径大小。结果表明：制备的CeO₂为多面体介孔结构,孔隙主要孔径小于4 nm。CeO₂传感器在240℃时响应最佳,对100 cm³/m³甲醇、甲醛、乙醇、乙醚、丙酮、乙二醇和二甲苯等气体的检测中,丙酮气体的响应值最高为550%,其对应的响应和恢复时间分别为16 s和4 s。该传感器在60 d内具有较高的稳定性,相对标准偏差值(RSD)为2.0%。     

HZSM-5分子筛上乙基叔丁基醚合成反应的理论研究

采用ONIOM (B3LYP/6-31G(d,p):UFF)分层计算的方法, 研究了HZSM-5 分子筛上乙醇和异丁烯合成乙基叔丁基醚(ETBE)的反应机理. 通过反应物在HZSM-5 分子筛上吸附性质的研究发现, 乙醇与分子筛酸性位相互作用形成氢键, 而异丁烯则作用在Brönsted 酸位上形成π配位吸附. 确定反应物吸附位置后, 进一步探索反应机理, 结果表明: HZSM-5分子筛上乙醇和异丁烯合成乙基叔丁基醚的反应为协同反应, 并且, 反应物吸附顺序的不同对反应过程存在一定的影响. ETBE合成反应的最优途径以反应物同时吸附形成的复合物作为起点. 在反应过程中, 形成π配位的H原子向异丁烯分子中不饱和双键的端位C原子靠近, 被吸附的乙醇分子中的O原子向异丁烯双键中的另一个C原子靠近, 直到形成C－O键, 生成ETBE. 这一过程中, 原有的质子H加成到异丁烯的端基C上形成C－H键, 而原醇羟基中的H和B酸位附近的O原子作用形成新的酸性位. 相应的协同反应的最低的反应势垒为25.14 kJ·mol^-1.     

硫杂杯[4]芳烃化学修饰的研究进展

硫杂杯[4]芳烃是由S原子取代经典杯芳烃中的桥联亚甲基而成的大环化合物,在分子识别、多核金属配合物、化学传感器等方面有广泛的应用.对硫杂杯[4]芳烃的化学修饰进行综述,有助于新型功能化硫杂杯芳烃衍生物的研究.     

新型间苯二酚杯芳烃硫脲衍生物对阴离子的识别

通过间苯二酚杯芳烃连续三步反应, 以较高产率合成了分子中连有8个和12个硫脲端基的间苯二酚杯芳烃的酰胺衍生物. 用紫外可见光谱法研究了两个代表性化合物4,6,10,12,16,18,22,24-八[6-(苯基硫脲基)-己氨甲酰基甲氧基]-2,8,14,20-四苯基杯[4]间苯二酚芳烃(THBC)和4,6,10,12,16,18,22,24-八[2-(苯基硫脲基)-1-甲基乙基-1-氨甲酰基甲氧基]-2,8,14,20-四苯基杯[4]间苯二酚芳烃(TPBC), 对各种阴离子(AcO^－, H₂PO₄^－, HSO₄^－, H₂PO₄^2－, C₁₂H₂₅-C₆H₄-SO₃^－, Cr₂O₇^2－, B₄O₇^2－, Cl^－, Br^－)的识别性能, 结果表明它们对AcO^－, H₂PO₄^－, HSO₄^－等阴离子有较好的配位作用, 能形成1∶3的配合物.     

间苯二酚杯[4]芳烃为涂层的压电石英传感器测定液相多巴胺

研究了以间苯二酚杯[4]芳烃为敏感涂层的石英压电晶体（PQC）传感器,在中 性磷酸盐缓冲液体系中对神经传递质多巴胺和抗坏血酸的响应,发现间苯二酚杯 [4]芳烃对多能上能下胺有很好的响应选择性,这归因于间苯二酚杯[4]芳烃与多巴 胺分子结构相匹配,形成主客体超分子体系。以间苯二酚杯[4]芳烃为涂层的POC传 感器对液相中多巴胺具有响应快、重现性好、灵敏度高的特点,线性响应范围为3. 5-500 μg/g。     

石墨烯吸附TiCl4分子的条件控制及光电性能的理论研究

为研究石墨烯吸附TiCl₄分子的影响因素及其光电性能,探索复合物应用于传感器及透明导电薄膜的可能性,采用第一性原理与蒙特卡罗方法研究TiCl₄气体分子在石墨烯表面的吸附条件控制与光电性能。结果表明：(1)石墨烯对TiCl₄气体分子具有较强的物理吸附作用,Cl原子吸附在其附近相距质心位置最远的碳原子顶位最稳定;(2)温度升高不利于TiCl₄气体分子吸附,气体逸度增加有利于吸附,TiCl₄气体分子插入石墨/双层石墨烯/多层石墨烯时宜将温度维持在TiCl₄沸点附近,并增加气体的压力;(3) TiCl₄的吸附对石墨烯的电子结构进行了调控,使费米能级附近的态密度显著提高,赝能隙减小,有效提高了导电性能;(4)在可见光区域,TiCl₄的吸附对体系的吸收性能影响不大,在提升透明导电薄膜导电性的同时未影响薄膜的光学性能。     

含杯芳烃的高分子功能材料的研究与应用*

作为第三代超分子大环化合物的代表,杯芳烃具有特殊的分子识别能力和独特的结构易修性,将杯芳烃掺杂或键合于高分子材料中,可得到各种具有分子识别功能的高分子材料。本文综述了含杯芳烃的高人子材料在化学传感器,色谱及传输分离等方面的研究和应用。     

Materials design and sensing mechanism of novel calix[6]arene composite for sensitively detecting amine drugs

In order to improve the convenience and sensitivity of amphetamines drug testing and reduce the threat of drugs to humans, we have designed a QCM gas sensor to detect amine-containing drugs. The sensing material is designed based on the chemical nature of amine drugs. The sensing mechanism is derived from a reversible Schiff base interaction between the amino group of the drug and the carbonyl group of the novel calix[6]arene derivatives as well as the hydrogen bond interaction between amino group and hydroxyl. The new composite material was well characterized by different analytical techniques including ¹H nuclear magnetic resonance (¹H-NMR), fourier transform infrared spectroscopy (FT-IR), scanning electronic microscopy (SEM), transmission electron microscope (TEM), Raman spectra, powder X-ray diffraction, etc. The sensing experiments were conducted by coating the composite onto quartz crystal microbalance (QCM) transducers. The experimental results indicated that the novel calixarene derivatives and their GO complexes based on the design have excellent selectivity, high sensitivity and repeatability to β-phenylethylamine.     

超分子螯合树脂--杯[4]芳烃接枝纤维素的设计、合成与吸附性能

通过纤维素多乙烯多胺衍生物2a~2c与1,3-二环氧丙基杯[4]芳烃3反应,合成了螯合树脂杯芳烃接枝纤维素4a~4c,用红外、元素分析和SEM等对其结构和形貌进行了表征.通过含氮量推算出新螯合树脂4a~4c中每个纤维素单元的杯芳烃接枝取代度分别为0.75、0.82和0.87.金属阳离子吸附性能实验表明,杯芳烃单元的引入在吸附过程中有重要作用,该螯合树脂结合了杯芳烃和纤维素的各自吸附性能优势,不仅吸附容量较高,而且表现出高的选择性吸附能力.树脂4b和4c对Ni2+离子表现出很高的吸附选择性,4a~4c的Ni2+饱和吸附容量分别达到2.96 mmol/g、2.93 mmol/g和2.66 mmol/g.在pH<4的强酸性条件下树脂的吸附能力迅速下降.该树脂用10%的氨水解吸附后有较好的重复使用性.     

Preparation and Application of Fullerene C60‐Polymers in Piezoelectric Quartz Crystal Sensors for Hemoglobin and Olefins

The C60—polycinnamaldehyde (C₆₀—PCA) and C60—polyphenylacetylene (C60—PPA) polymers were synthesized by the Friedel—Craft reaction and applied as piezoelectric (PZ) quartz crystal coating materials. A C60—polycinnamaldehyde (PCA) coated piezoelectric quartz crystal liquid sensor with a homemade computer interface was prepared and applied as a PZ hemoglobin sensor. The adsorption of hemoglobin onto the C60—PCA coated crystal resulted in a decreased oscillating frequency. The variations in crystal frequency were converted to voltage with a frequency to voltage converter, followed by amplification with OPA and data acquisition with an analog to digital converter. The PZ hemoglobin sensor exhibited good sensitivity of 6530 Hz/(mg/mL) with a detection limit at the ppm level for hemoglobin. Further, a C60—polyphenylacetylene (C60—PPA) coated piezoelectric quartz crystal gas sensor with an Intell‐8255 data processing system for various olefin vapors was also made. The aromatic hydrocarbons such as toluene seem to have greater adsorption onto C60—PPA membrane than alkynes, alkenes, and alkanes. The adsorption of polycyclic aromatic hydrocarbons (PAHs) onto the C60—PPA membrane was also examined. The C₆₀—PPA coated PZ crystal gas sensor showed much better sensitivity for PAHs than for other olefins such as toluene, 1‐hexyne and 1‐hexene, and a much larger frequency shift for naphthalene than other PAHs was also found.     

QCM 表面自组装胱氨酸1，3－桥连杯[4]芳烃膜用于识别气相丁胺

Two cystine-bearing 1,3-bridged calix[4]arenes were used as the coatings of the quartz crystal microbalance (QCM) with gold electrodes. The two calix[4]arene derivatives were self-assembled onto the gold electrode surface by the covalent attachment between the di-sulfur and gold. The compound of cystine-bearing bi-phenylalanine 1,3-bridged calix[4]arene (CPC) with longer alkyl chain had better self-assembled capacity onto the fresh surfaces of gold electrode than that of cystine-bearing 1,3-bridged calix[4]arene (CC) with comparably shorter alkyl chain.The modified QCM sensors were used to recognize the butylamine isomers in gas. The results showed that the QCM coated with both compounds had preferential affinity to n-butylamine, then i-butylamine, t-butylamine in the range of low concentrations, indicating that in the recognition process, the steric hindrance effect played an important role when forming complex with guest molecules. When the concentrations of the analytes were increased, the polarity and the magnetism of the butylamine became determinative factors. The reversibility was improved greatly and the equilibrium time was much shorter on the self-assembled film than on the film obtained by dropping coating.     

NEW FLUOROSILOXANE AS A COATING MATERIAL FOR NERVE AGENT SENSORS

Polymer coated quartz crystal microbalance （QCM） sensor based on the frequency shifts due to the adsorption of compounds at the surface of modified quartz crystal electrode is an effective method for detection of sarin （GB） which is a highly toxic nerve warfare agent. A new fluorosiloxane polymer has been synthesized through 6 steps from trifluoromethyl benzene. The synthesis was achieved from trifluoromethyl benzene through nitration, hydrogenation. The obtained m-nitrotrifluoromethyl aniline was treated with NANO2, and then hydrolyzed to m-nitrotrifluoromethyl phenol, m-nitrotrifluoromethyl phenol was reacted with allyl bromide to the ether product. The product was rearranged by Claisen rearrangement, and then reacted with polymethylhydrosiloxane under catalyst of Pt/DVTMS. The fluorosiloxane polymer can be obtained. The polymer has been successfully used as QCM coating material     

A Novel QCM-based Biosensor for Detection of Microorganisms Producing Hydrogen Sulfide

Abstract

A novel piezoelectric quartz crystal microbalance (QCM) device with gas permeable membrane is proposed for the detection of microorganisms producing hydrogen sulfide (H₂S). The detection theory is based on the adsorption of hydrogen sulfide onto the silver electrode of the piezoelectric crystal sensor, which causes a dramatic decrease in the resonant frequency of QCM. A 100 Hz frequency shift is chosen as the criteria value to judge the presence of microorganisms producing H₂S. Factors affecting detection were investigated. Desiccant is of great practical importance in sensor response. This new biosensor can be a potential candidate for detecting bacteria which produce hydrogen sulfide.     

Polyglycerol based coatings to reduce non-specific protein adsorption in sample vials and on SPR sensors

Coatings based on dendritic polyglycerol (dPG) were investigated for their use to control nonspecific protein adsorption in an assay targeted to analyze concentrations of a specific protein. We demonstrate that coating of the sample vial with dPG can significantly increase the recovery of an antibody after incubation. First, we determine the concentration dependent loss of an antibody due to nonspecific adsorption to glass via quartz crystal microbalance (QCM). Complementary to the QCM measurements, we applied the same antibody as analyte in an surface plasmon resonance (SPR) assay to determine the loss of analyte due to nonspecific adsorption to the sample vial. For this purpose, we used two different coatings based on dPG. For the first coating, which served as a matrix for the SPR sensor, carboxyl groups were incorporated into dPG as well as a dithiolane moiety enabling covalent immobilization to the gold sensor surface. This SPR-matrix exhibited excellent protein resistant properties and allowed the immobilization of amyloid peptides via amide bond formation. The second coating which was intended to prevent nonspecific adsorption to glass vials comprised a silyl moiety that allowed covalent grafting to glass. For demonstrating the impact of the vial coating on the accuracy of an SPR assay, we immobilized amyloid beta (Aβ) 1-40 and used an anti-Aβ 1-40 antibody as analyte. Alternate injection of analyte into the flow cell of the SPR device from uncoated and coated vials, respectively gave us the relative signal loss (1 − RU_uncoated/RU_coated) caused by the nonspecific adsorption. We found that the relative signal loss increases with decreasing analyte concentration. The SPR data correlate well with concentration dependent non-specific adsorption experiments of the analyte to glass surfaces performed with QCM. Our measurements show that rendering both the sample vial and the sensor surface is crucial for accurate results in protein assays.     

稀土氧化膦取代杯芳烃配合物的合成与结构

合成了一种新的氧化膦取代杯芳烃衍生物的稀土离子(La³⁺,Eu³⁺)硝酸盐配合物.通过元素分析和红外光谱对配合物进行了表征.在无水甲醇中培养出了配合物的单晶,用X射线单晶衍射法测定了其晶体结构.硝酸镧配合物晶体[L·La(OH₂)(NO₃)₂]NO₃{L为四(亚甲基二苯基氧化膦)杯[4]芳烃}属四方晶系,空间群P4₃2₁2,晶胞参数a=b=1.8977(4)nm,c=3.1087(11)nm;Z=4;V=11.196(5)nm³;D_c=1.097g/cm³,F(000)=3712,μ=0.491mm^-1,R₁=0.1181,wR₂=0.1930.硝酸铕配合物晶体[L·Eu(OH₂)(NO₃)₂]NO₃·CH₃OH属单斜晶系,空间群C2/c,晶胞参数a=2.88172(11)nm,b=5.4015(2)nm,c=2.01189(7)nm;β=133.4067(9)°,Z=8;V=22.7511(14)nm³,D_c=1.106g/cm³,F(000)=7464,R₁=0.0671,wR₂=0.1794.2个配合物的晶体结构相类似,配合物中配体的4个磷氧键上的氧原子、2个双齿配位的硝酸根中的4个氧原子还有1个水分子中的氧原子分别参与了配位.中心离子配位数为9,配位多面体为单帽四方反棱柱体.另外在铕配合物的杯芳烃中还包合了1个甲醇分子.     

Studies on QCM-type NO2 Gas Sensor Based on Graphene Composites at Room Temperature

Synthetic graphene composite was modified on a transducer of quartz crystal microbalance(QCM) to fabricate a gas sensor for low concentration nitrogen dioxide(NO₂) detection. The gas sensing properties of the QCM coated with SnO₂-rGO and AgNPs-SnO₂-rGO composites were investigated when exposing QCM to low NO₂ con-centration(2.05-20.5 mg/m³) atmosphere at room temperature. The sensing performances of the QCM with AgNPs-SnO₂-rGO composites were enhanced by the introduction of Ag nanoparticles, and the QCM modified with AgNPs-SnO₂-rGO composites could detect NO₂ at room temperature.     

杯[4]芳烃黄原酸酯衍生物的合成与阳离子萃取性能

以二氧六环作溶剂, 杯[4]芳烃二甲氧基二羟乙氧基衍生物2与氢氧化钾、二硫化碳作用合成了杯芳烃黄原酸盐衍生物3, 并进一步与碘甲烷或氯化苄反应首次合成了含黄原酸酯基的杯芳烃衍生物4a和4b. 阳离子萃取试验表明该新型杯芳烃衍生物比单硫杂杯芳烃衍生物具有更好的过渡金属离子萃取性能.