Synthesis of Ruthenium(II) Tris(2,2'-bipyridine) Complexes

A procedure for preparing Ru(II) tris(2,2'-bipyridine) complexes containing one functionalized bipyridine ligand was developed.     

Time-resolved photoacoustics study of the ruthenium(II) bis(2,2'-bipyridine)(4,4'-dicarboxy-2,2'-bipyridine) complex

The formation and the decay of the triplet metal to ligand charge transfer state ((3)MLCT) of ruthenium(II) bis(2,2'-bipyridine)(4,4'-dicarboxy-2,2'-bipyridine) (Ru(bpy)(2)(dcbpy)) were characterized using photoacoustic calorimetry. At pH 6 and 2, the (3)MLCT state formation leads to a volume change of -8 mL mol(-1) and enthalpy changes of 17 kcal mol(-1) and 13 kcal mol(-1), respectively. We attribute the volume contraction to structural changes and to solvent electrostriction. At pH 4, the photoexcitation of the complex leads to an expansion of 14 mL mol(-1) and an enthalpy change of approximately 119 kcal mol(-1) due to protonation of the carboxyl group in the excited state.     

Acid-Base Properties of the Ground and Excited States of Ruthenium(II) Bis(2,2'-bipyridine) 3-Carboxyl-2,2'-bipyridine

Acid-base properties for ruthenium(II) bis(2,2'-bipyridine) 3-carboxyl-2,2'-bipyridine reveal a ground state pK(a) of 0.82 +/- 0.07 and an excited state pK(a) of 2.31 +/- 0.05, a 1.5 pH unit increase from the ground state. The excited state pK(a) is temperature independent while the ground state pK(a)(0) increases with temperature and has DeltaH(0) and DeltaS(0) values of -990 +/- 149 cm(-)(1) and -4.57 +/- 0.48 cm(-)(1) K(-)(1), respectively. The acidic form of the complex emits at lower energy than the basic form at both 296 and 77 K. The emission energy maxima are solvent dependent and decrease in energy when the solvent changes from 4:1 (v/v) 2-MeTHF-CH(2)Cl(2) to water and when the pH decreases. Changes in excited state lifetimes with emission energy follow the energy gap law with an intercept of 49 +/- 1 and a slope of (2.11 +/- 0.09) x 10(-)(3). Emission quantum yields for protonated and deprotonated species in 4:1 (v/v) 2-MeTHF-CH(2)Cl(2) are 0.023 +/- 0.001 and 0.110 +/- 0.002, respectively. The temperature dependence of the emission lifetimes gives energy barriers of 270 cm(-)(1) for the complex in aqueous solution at pH -0.5, and 990 cm(-)(1) in aqueous solution at pH 4.5, and 1920 cm(-)(1) in 4:1 (v/v) 2-MeTHF-CH(2)Cl(2.)     

Characterization and biological activities of two copper(II) complexes with diethylenetriamine and 2,2'-bipyridine or 1,10-phenanthroline as ligands

Two new mixed ligand copper(II) complexes with diethylenetriamine, 2,2'-bipyridine and 1,10-phenanthroline have been synthesized. The crystal and molecular structures of [Cu(dien)(phen)](ClO(4))(2) and [Cu(dien)(bipy)](BF(4))(2) (dien=diethylenetriamine, phen=1,10-phenanthroline, bipy=2,2'-bipyridine) were determined by X-ray crystallography from single crystal data. These two complexes have similar structures. The EPR spectral data also suggest that these complexes have distorted square pyramidal geometry about copper(II). Anti-microbial and superoxide dismutase activities of these complexes have also been measured. They show the higher SOD activity than the corresponding simple Cu(II)-dien/Cu(II)-PMDT (PMDT=N,N,N',N',N'-pentamethyldiethylenetriamine) complexes because of a strong axial bond of one of the nitrogen atoms of the alpha-diimine. Both the complexes have been found to cleave plasmid DNA in the presence of co-reductants such as ascorbic acid and glutathione.     

Blue electrophosphorescent organoplatinum(II) complexes with dianionic tetradentate bis(carbene) ligands

Robust charge-neutral Pt(II) complexes containing dianionic tetradentate bis(N-heterocyclic carbene) ligands exhibit intense blue phosphorescence in fluid solutions and in polymer films, and have been vacuum-deposited as a phosphorescent dopant in organic blue-light-emitting diodes.     

Indium tin oxide electrodes modified with tris(2,2'-bipyridine-4,4'-dicarboxylic acid) iron(II) and the catalytic oxidation of tris(4,4'-di-tert-butyl-2,2'-bipyridine) cobalt(II)

Indium tin oxide (ITO) electrodes modified by attachment of tris(2,2'-bipyridine-4,4'-dicarboxylic acid) iron(II) are examined. The mode of attachment is believed to be via the COOH functions in a manner similar to attachment of similar carboxylate-containing compounds to TiO2 surfaces. On the surface the complex resides as a stable electrochemically active monolayer. These modified electrodes can efficiently catalyze the oxidation of certain cobalt complexes, specifically, tris(4,4'-di-tert-butyl-2,2'-bipyridine) cobalt(II). On the unmodified ITO surfaces this cobalt complex is essentially electrochemically inert. The catalytic process approaches diffusional control at very slow scan speeds. Also, the electro-catalysis is sufficiently efficient that the peak oxidation current for Co2+, under certain conditions, exceeds the i(p) for the surface oxidation of the adsorbed Fe2+ by >x100 and the current for the uncatalyzed oxidation of Co2+ by considerably more than that.     

Synthesis, structures and properties of Cu(II) and Mn(II) complexes with 1,10-phenanthroline-2-carboxylic acid and 2,2'-bipyridine ligands

Four new 2,2'-bipyridine and 1,10-phenanthroline complexes, namely [Mn(phenca)(2)]·(H(2)O)(2) (1), [Cu(4)(phen)(4)(OH-)(4)(H(2)O)(2)](DMF)(4)(ClO(4)-)(4)(H(2)O) (2), [Cu(2)(2,2-bipy)(2)(C(2)O(4)2-)(H(2)O)(2)(NO(3))(2)] (3) and [Cu(2,2-bipy)(2)(ClO(4)-)](ClO(4)-) (4) (2,2'-bpy = 2,2'-bipyridine, Hphenca = 1,10-phenanthroline-2-carboxylic acid) have been synthesized by a hydrothermal reaction. The products were characterized by elemental analysis, infrared spectroscopy and X-ray crystal diffraction. While strong hydrogen bonds play central roles in the formation of the 3D structure, the combined influence of the weak interactions such as π···π interactions is also evident in the structures. A preliminary investigation on the ion exchange properties of the complexes is presented.     

Mechanochromic luminescence switch of platinum(II) complexes with 5-trimethylsilylethynyl-2,2'-bipyridine

Planar platinum(II) complexes Pt(bpyC≡CSiMe(3))(C≡CC(6)H(4)R-4)(2) (R = H (1), Bu(t) (2)) with 5-trimethylsilylethynyl-22'-bipyridine show an unusual, reversible, and reproducible mechanical stimuli-responsive color and luminescence switch. When crystalline 1 or 2 is ground, bright yellow-green emitting is immediately converted to red luminescence with an emission red shift of 121-155 nm for 1 or 53-89 nm for 2. Meanwhile, the crystalline state is transformed to an amorphous phase that can be reverted to the original crystalline state by organic vapor adsorbing or heating, along with red luminescence turning back to yellow-green emitting. The reversibility and reproducibility of luminescence mechanochromic properties have been dynamically monitored by the variations in emission spectra and X-ray diffraction patterns. The drastic grinding-triggered emission red shift is likely involved in the formation of a dimer or an aggregate through Pt-Pt interaction, resulting in a conversion of the (3)MLCT/(3)LLCT emissive state in the crystalline state into the (3)MMLCT triplet state in the amorphous phase. Compared with the drastic grinding-triggered emission red shift in 1 (121-155 nm), the corresponding response shift in 2 (53-89 nm) is much smaller since a bulky tert-butyl in C≡CC(6)H(4)bu(t)-4 induces the planar platinum(II) molecules to stack through a longer Pt-Pt distance and less intermetallic contact compared with that in 1, as suggested from EXAFS studies.     

Photophysical Properties and Photochemical Behaviour of Ruthenium(II) complexes containing the 2,2′-bipyridine and 4,4′-diphenyl-2,2′-bipyridine ligands

The temperature dependence of the emission lifetime of the series of complexes Ru(bpy)_n(4,4′-dpb) (bpy = 2,2′bipyridine, 4,4′-dpb = 4,4′-diphenyl-2,2′-bipyridine) has been studied in propionitrile/butyronitrile (4:5 v/v) solutions in the range 90–293 K. The obtained photophysical parameters show that the energy separation between the metal-to-ligand charge tranfer (³MLCT) emitting level and the photoreactive metal-centered (³MC) level changes across the series (ΔE = 3960, 4100, 4300, and 4700 cm^?1 for Ru(bpy)), Ru(bpy)2(4,4′-dpb)²⁺, Ru(bpy)(4,4′-dpb), and Ru(4,4′-dpb), respectively, where ΔE is the energy separation between the minimum of the ³MLCT potential curve and ³MLCT – ³MC crossing point. Comparison between spectral and electrochemical data indicated that the changes in ΔE are due to stabilization of the MLCT levels in complexes containing 4,4′-dpb with respect to Ru(bpy)²⁺₃. The photochemical data for the same complexes (as I^? salts) have been obtained in CH₂Cl₂ in the presence of 0.01M Cl^? upon irradiation at 462 nm. The complexes containing 4,4′-dpb are more photostable than Ru(bpy). Comparison between the data for thermal population of the ³MC photoreactive state and those for photochemistry indicated that the overall photochemical process is governed by (i) a thermal redistribution between the emitting and photoreactive excited states, and (ii) mechanistic factors, likely related to the size of the detaching ligand.     

Ruthenium(II) complexes with triphenylphosphine or triphenylarsine and other monodentate ligands

Synthesis and studies on some five-coordinate ruthenium(II) complexes, viz. [Ru(MPh₃)(C₆H₅CHO)₂Cl₂] and [Ru(MPh₃)₂(CO)Cl₂] (where M = P or As) have been described. Reactions of [Ru(MPh3)(C₆H₅CHO)₂Cl₂] with N,N-dimethylformamide, dimethylsulphoxide and pyridine and of [Ru(MPh₃)₂(CO)Cl₂] with pyridine are described.     

Ruthenium(II) complexes with ferrocene-modified arene ligands: synthesis and electrochemistry

A series of arene-ruthenium complexes of the general formula [RuCl₂{η⁶-C₆H₅(CH₂)₂R}L] with R=OH, CH₂OH, OC(O)Fc, CH₂OC(O)Fc (Fc=ferrocenyl) and L=PPh₃, (diphenylphosphino)ferrocene, or bridging 1,1^′-bis(diphenylphosphino)ferrocene, have been synthesized. Two synthetic pathways have been used for these ferrocene-modified arene-ruthenium complexes: (a) esterification of ferrocene carboxylic acid with 2-(cyclohexa-1,4-dienyl)ethanol, followed by condensation with RuCl₃ · nH₂O to afford [RuCl₂{η⁶-C₆H₅(CH₂)₂OC(O)Fc}]₂, and (b) esterification between ferrocene carboxylic acid and [RuCl₂{η⁶-C₆H₅(CH₂)₃OH}L] to give [RuCl₂{η⁶-C₆H₅(CH₂)₃OC(O)Fc}L]. All new compounds have been characterized by NMR and IR spectroscopy as well as by mass spectrometry. The single-crystal X-ray structure analysis of [RuCl₂{η⁶-C₆H₅(CH₂)₃OH}(PPh₃)] shows that the presence of a CH₂CH₂CH₂OH side-arm allows [RuCl₂{η⁶-C₆H₅(CH₂)₃OH}(PPh₃)] to form an intramolecular hydrogen bond with a chlorine atom. The electrochemical behavior of selected representative compounds has been studied. Complexes with ferrocenylated side arms display the expected cyclic voltammograms, two independent reversible one-electron waves of the Ru(II)/Ru(III) and Fe(II)/Fe(III) redox couples. Introduction of a ferrocenylphosphine onto the ruthenium is reflected by an additonal reversible, one-electron wave due to ferrocene/ferrocenium system which is, however, coupled with the Ru(II)/Ru(III) redox system.     

Syntheses, characterization, and photochromic studies of spirooxazine-containing 2,2'-bipyridine ligands and their zinc(II) thiolate complexes

A series of photochromic spirooxazine-containing zinc(II) diimine bis-thiolate complexes were successfully synthesized, and their photophysical and photochromic properties were studied. The X-ray crystal structure of complex 1a has also been determined. Upon excitation by UV light at 330 nm, all the ligands and complexes exhibit photochromic behavior. The thermal bleaching kinetics of the ligands and the complexes were studied in dimethylformamide at various temperatures. The photochemical quantum yields for the photochromic reactions of the ligands and complexes were also determined.     

Synthesis, characterization, and bromine substitution by 4,4'-di(5-nonyl)-2,2'-bipyridine in Cu(II)(4,4'-di(5-nonyl)-2,2'-bipyridine)Br(2)

The crystal structure of a novel compound Cu(II)(dNbpy)Br(2) (dNbpy = 4,4'-di(5-nonyl)-2,2'-bipyridine), which is used in the reverse atom transfer radical polymerization, is reported. Cu(II)(dNbpy)Br(2) crystallizes in the triclinic P1 space group with a = 12.5283(11) A, b = 15.0256(14) A, c = 17.7900(16) A, alpha = 90.350(2) degrees, beta = 99.360(2) degrees, gamma = 107.937(2) degrees, and Z = 2. The Cu(II) center in the complex has a distorted square planar geometry and is coordinated by two nitrogen atoms of a single dNbpy ligand (Cu-N = 2.011(7) and 2.022(7) A) and two bromine atoms (Cu-Br = 2.3621(14) and 2.3567(13) A). The similarity of the absorption spectra in the solid state and in solution suggested that the geometry of the complex remained unchanged upon dissolution. In the presence of dNbpy, Cu(II)(dNbpy)Br(2) undergoes Br substitution to form ionic [Cu(II)(dNbpy)(2)Br](+)[Br](-). DeltaH degrees and DeltaS degrees values for this equilibrium were negative and dependent on the polarity of the medium. It was found that, under the typical polymerization conditions (T > or =90 degrees C and the total copper concentration in the range 1.0 x 10(-2)-1.0 x 10(-1) M), Cu(II)Br(2) and 2 equiv of dNbpy will predominantly form the neutral Cu(II)(dNbpy)Br(2) complex. In a polar medium under the same conditions, [Cu(II)(dNbpy)(2)Br](+)[Br](-) is preferred.     

Large size anion binding with iron(II) complexes of a 5,5'-disubstituted-2,2'-bipyridine ligand

Three 5,5'-substituted 2,2'-bipyridyl ligands around a metal atom form two clefts which can encapsulate sulfate, perchlorate, or nitrate anions.     

Thermal Properties of Complexes of Mn(II), Fe(II), Co(II), Ni(II) With 2,2'-bipyridine Or 4,4'-bipyridine and Thiocyanates

The compounds ML₂(NCS)₂, (M(II)=Mn, Co), FeL₂(NCS)₂×2H₂O, NiL₃ NCS)₂×3H₂O (L=2,2'-bipyridine, 2-bipy) MX₂(NCS)₂×2H₂O (M(II)=Mn, Fe; X=4,4'-bipyridine, 4-bipy) have been prepared and their IR spectra and molar conductivity studied. The thermal decomposition of the complexes was studied under non-isothermal conditions in air. During heating the hydrated complexes lose crystallization water molecules in one or two steps and then decompose via different intermediate compounds to the oxides Mn₃O₄, Fe₂O₃, CoO, NiO. This revised version was published online in August 2006 with corrections to the Cover Date.     

Neutral Hexacoordinate Tin(IV) Halide Complexes with 4,4'-Dimethy-2,2'-bipyridine

A series of three neutral, hexacoordinate tin(IV) complexes were synthesized by the reaction of 4,4'-dimethyl-2,2'-bipyridine (DMB) with SnX₄, X = Cl, Br, and I, as starting materials. The complexes (DMB)SnX₄ were characterized in solution by ¹H, ¹³C, and ¹¹⁹Sn NMR spectroscopy, and in the solid-state by ¹¹⁹Sn MAS NMR spectroscopy. In addition, single-crystal X-ray diffraction and elemental analysis were used to confirm the molecular structures. In these complexes, the tin atom adopts a distorted octahedral arrangement and the DMB acts as a bidentate N,N'-chelate ligand. Computational DFT methods were also employed to gain more insight into the nature of the bonding in these complexes, including the hypothetical complexes (DMB)SnX₄ (X = F, At). Additionally, the validity and reliability of the ¹¹⁹Sn NMR chemical shifts were examined. The calculated values were compared with the experimental signals and the effects of structure and solvent are discussed. Finally, all of the complexes (DMB)SnX₄ were successfully tested for the ring-opening polymerization (ROP) of bulk ε-caprolactone under non-dried and aerobic conditions as precatalyst.     

The unexpected preference for the fac-isomer with the tris(5-ester-substituted-2,2'-bipyridine) complexes of ruthenium(II)

The synthesis of a number of new 2,2'-bipyridine ligands, functionalized with bulky ester side groups, is reported (L2-L8). Their reaction with [Ru(DMSO)(4)Cl(2)] gives rise to tris-chelate ruthenium(II) metal complexes which show an unusually high proportion of the fac-isomer, as judged by (1)H NMR following conversion to the ruthenium(II) complex of 2,2'-bipyridine-5-carboxylic acid methyl ester (L1). The initial reaction appears to have thermodynamic control with the steric bulk of the ligands causing the third ligand to be labile under the reaction conditions used, giving rise to disappointing yields and allowing rearrangement to the more stable facial form. DFT studies indicate that this does not appear to be as a consequence of a metal centered electronic effect. The two isomers of [Ru(L1)(3)](PF(6))(2) were separated into the two individual forms using silica preparative plate chromatographic procedures, and the photophysical characteristics of the two forms compared. The results appear to indicate that there is no significant difference in both their room temperature electronic absorption and emission spectra or their excited state lifetimes at 77 K.     

Ruthenium(III) and ruthenium(II) complexes containing triphenylarsine and other ligands

The reactions of [RuCl₃(AsPh₃)₃] with ligands containing nitrogen (alkyl and aryl cyanides, pyridine, α-picoline N.N′-bipyridyl, 1,10-phenanthroline), oxygen (ketones, aldehydes, N,N-dimethylformamide, tetrahydrofuran, dimethylsulphoxide and nitroalkanes) and sulphur (CS₂ and Me₂S) donor atoms have been studied. The reactions of [RuCl₃(AsPh₃)₃] with tetra alkyl and aryl ammonium and arsonium salts have also been explored. The compounds obtained have been characterised by analyses, conductivity measurements, magnetic measurements and IR spectra. The electronic spectra of the complexes are discussed in terms of possible structures. An equilibrium between hexacoordinated and pentacoordinated species is suggested on the basis of electronic spectral studies.     

ResonanceRaman spectra of Iron(II) complexes with 4,4′-didodecyloxy-2,2′-bipyridine and 4,4′-dioctadecyloxy-2,2′-bipyridine

The resonanceRaman spectra of Fe(LC ₁₂)₃Cl₂ and Fe(LC ₁₈)₃Cl₂ (whereLC ₁₂ andLC ₁₈ denote 4,4′-didodecyloxy-2,2′-bipyridine and 4,4′-dioctadecyloxy-2,2′-bipyridine, respectively) have been measured along with their excitation profiles. The exciting lines of an Ar⁺ laser have been used. The bands appearing in theRR spectra within 1 200–1 600cm^?1 (expected to arise from thebipy moiety C-N and C-C vibrations) suffer the greatest resonance enhancements. Both depolarization ratios of theRaman bands and excitation profiles reveal the interaction of the resonant electronic states.     

The isolation and secondary functionalisation of fac-tris-2,2'-bipyridine complexes of ruthenium(II)

fac-Ruthenium(II) tris-(5-carboxy-2,2'-bipyridine) has been synthesised as a single geometric isomer for the first time, and proves to be a good 'building-block' to introduce new functionality with retention of the isomeric integrity.