Click-chemistry for surface modification of monodisperse-macroporous particles

In this study, click chemistry was proposed as a tool for tuning the surface hydrophilicity of monodisperse-macroporous particles in micron-size range. The monodisperse-porous particles carrying hydrophobic or hydrophilic molecular brushes on their surfaces were obtained by the proposed modification. Hydrophilic poly(glycidyl methacrylate-co-ethylene dimethacrylate), poly(GMA-co-EDM) particles were hydrophobized by the covalent attachment of poly(octadecyl acrylate-co-propargyl acrylate), poly(ODA-co-PA) copolymer onto the particle surface via triazole formation by click chemistry. In the second part, Hydrophobic poly(4-chloromethylstyrene-co-divinylbenzene), poly(CMS-co-DVB) particles were hydrophilized by the covalent attachment of poly(vinyl alcohol), PVA onto their surface also via triazole formation by click chemistry. The presence of PVA and poly(ODA-co-PA) copolymer on the corresponding particles was shown by FTIR-DRS. After click-coupling reactions applied for both hydrophobic poly(CMS-co-DVB) and hydrophilic poly(GMA-co-EDM) particles, the marked changes in surface polarity were shown by contact angle measurements. Protein adsorption characteristics of plain and modified particles were investigated for both materials. In the isoelectric point of albumin, the non-specific albumin adsorption decreased from 225 to 80 mg/g by grafting PVA onto the poly(CMS-co-DVB) beads. On the other hand, the non-specific albumin adsorption onto the plain poly(GMA-co-EDM) beads increased from 50 to 400 mg/g by the covalent attachment of poly(ODA-co-PA) copolymer onto the bead-surface via click chemistry. The protein adsorption behavior was efficiently regulated by the covalent attachment of appropriate molecular brushes onto the surfaces of selected particles. The results indicated that "click chemistry" was an efficient tool for controlling the polarity of monodisperse-macroporous particles.     

Polymer mediated peptide immobilization onto amino-containing N-isopropylacrylamide-styrene core-shell particles

Monodisperse cationic core-shell latex particles have been prepared using a shot polymerization process, with N-(3-aminopropyl)-methacrylamide-hydrochloride (APMH) as the functional monomer. The final latexes were characterized with respect to final polymerization conversion, water soluble polymer formation, particle size and size distribution, surface charge density and electrokinetic properties. Then the covalent grafting of maleic anhydride-alt-methyl vinyl ether (MAMVE) copolymer onto aminated latex particles was investigated. The most efficient conditions to obtain derivatised particles with no alteration of the colloidal stability were to control both polymer amount/latex particles concentration ratio and the mixing method of the two species. The charge inversion of the hydrolysed MAMVE functionalized particles was demonstrated by measuring the electrophoretic mobility as a function of pH. Finally, the covalent binding approach was implemented with peptide-MAMVE conjugates, confirming the great potential of this promising methodology for the preparation of reactive latex particles bearing peptides.     

聚电解质微球多级自组装制备双重药物载体

将表面带正电荷的壳聚糖(CS)微球和表面带负电荷的聚(L-谷氨酸)-b-聚氧化丙烯-b-聚(L-谷氨酸)(GPG)胶束共混,制备了CS/GPG聚集体水溶液体系.通过改变CS/GPG的共混比例,研究了CS微球和GPG胶柬形成稳定CS/GPG聚集体水溶液体系的配比范围,并对其粒径分布和表面电位进行了表征.在此基础上,将CS...     

聚合物纳米微粒静电组装行为及其表征

使用2,2′-偶氮二异丁基脒二盐酸盐自由基引发剂,改变甲基丙烯酰氧乙基十六烷基二甲基溴化铵阳离子功能单体的量与苯乙烯进行乳液聚合获得不同粒径的阳离子乳胶粒,使用十二烷基硫酸钠为乳化剂和过硫酸钾为引发剂制备阴离子聚合物乳胶粒.采用基于静电相互作用的异凝聚法将以上2种带有相反电荷的乳胶粒组装,获得了表面粗糙程度不同的复合微粒.对异凝聚过程中复合液透光率和微粒大小及分布进行跟踪测试,并用透射电子显微镜表征了阳离子微粒、阴离子微粒以及复合微粒的形态和大小.结果表明,在一定范围内可以通过控制阴离子乳胶粒与阳离子乳胶粒的复合比例改变单个复合微粒表面阳离子小微粒的数目.     

Conformational changes of pyrene-labeled polyelectrolytes with pH: effect of hydrophobic modifications

Structural changes of pyrene-labeled and unlabeled poly(maleic acid/octyl vinyl ether) (PMAOVE) and poly(maleic acid/methyl vinyl ether) (PMAMVE) with changes in pH have been investigated in this study. The changes in the photophysical properties of pyrene are interpreted to investigate uncoiling or swelling of the polymeric chains with pH. The vibrational fine structure of the pyrene fluorescence (I(3)/I(1)) and the ratio between excimer and monomer fluorescence (I(e)/I(m)) of both pyrene-labeled and unlabeled PMAMVE and PMAOVE suggest that, at pH 4, the polymers are in the coiled form and PMAOVE forms hydrophobic nanodomains. An increase in pH ionizes a number of COOH groups on both PMAMVE and PMAOVE, which leads to the stretching or swelling of the polymers.     

Thermally-responsive surfaces comprising grafted poly(N-isopropylacrylamide) chains: Surface characterisation and reversible capture of dispersed polymer particles

In this study we investigate thermally-responsive surfaces prepared by grafting PNIPAm from a cationic macroinitiator (MI) that was adsorbed onto a range of anionic substrates. The substrates used were mica, glass, quartz and high surface area carbon foam. The carbon foam was rendered thermally responsive by first coating it with a layer of calcined laponite particles. PNIPAm brushes were grown from the substrates using surface-initiated atom transfer radical polymerisation. The thermally-responsive PNIPAm layers were characterised in detail at room temperature and 50 °C using atomic force microscopy (AFM) and contact angle measurements. The surfaces changed from being non-adhesive to adhesive when the temperature was increased to 50 °C. Young’s modulus values and adhesive force values are reported. Particle capture experiments involving dispersed polystyrene or poly(BD/MAA) (butadiene and methacrylic acid) particles were conducted. High extents of particle capture were observed. It was shown that the highest extents of thermally-triggered particle capture at 50 °C occurred for surfaces that exhibited the largest increases in contact angle upon increasing the temperature. Importantly, thermally-triggered capture for both anionic polystyrene and poly(BD/MAA) particles was shown to be partially reversible with up to 30% of the captured particles released during cooling. This is the first time that significant reversibility of thermally-triggered capture of polymer particles has been reported.     

Complexation between poly(maleic acid/octyl vinyl ether) and poly(vinyl caprolactam) in aqueous solution and at the alumina/water interface

Solution and interfacial properties of binary polymer mixtures of poly(maleic acid/octyl vinyl ether) (PMAOVE) and poly(vinyl caprolactam) (PVCAP) have been studied for the alumina/water system. To test the hydrophobic effect, mixtures of poly(maleic acid/methyl vinyl ether) (PMAMVE) and PVCAP are also investigated and compared to the behavior of PMAOVE/PVCAP. At low pH, both polymer mixtures become turbid upon mixing. The turbidity increases at low mixing ratios of PVCAP to the vinyl ether component, reaches a maximum, and then decreases at higher mixing ratios. Upon shifting the pH to the alkaline range, i.e., pH 7.5 and above, the turbid solution becomes clear for both the polymer mixtures. Cloud point measurements indicate the absence of complexation of PVCAP with PMAMVE under the alkaline conditions, but strong interaction with PMAOVE. This is attributed to the different forces involved in the complexation among the polymers: H bonding for PVCAP/PMAMVE and both H bonding and hydrophobic effects for PVCAP/PMAOVE. At the alumina/water interface, the normally nonadsorbing PVCAP is triggered to adsorb by PMAOVE, attributed to the hydrophobic complexation between the two. However, the adsorption of PVCAP shows a maximum as a function of the concentration of PMAOVE. At concentrations of PMAOVE above the onset of its own plateau adsorption, the amount of PVCAP triggered to adsorb is reduced possibly due to the polymer complex formation in solution.     

Effect of sovents on radiation-induced ionic graft polymerization

The influence of various solvents on radiation-induced cationic (grafting of vinyl-n-butyl ether onto polyethylene) and anionic (grafting of 2-methyl-5-vinylpyridine onto polyethylene) graft polymerization was studied. This ionic grafting was performed in thoroughly dried systems at room temperature. It was established that electron-acceptor solvents promote cationic grafting but that electron-donor solvents promote the anionic. A clear correlation between the donor number of solvents and grafting value by the anionic mechanism was shown. There was no correlation between dielectric constants and grafting values. The reaction orders, according to monomer concentration by 2-methyl-5-vinylpyridine grafting in various solvents, were equal to approximately 1.5 and 2 for the radical and anionic mechanisms, respectively. The effect of solvents on radiation-induced ionic graft polymerization is discussed. The results of this study indicate the correct choice of solvents for radiation-induced ionic grafting.     

Synthesis of poly(ethylene glycol) (PEG)-grafted colloidal silica particles with improved stability in aqueous solvents

The known grafting procedures of colloidal silica particles with poly(ethylene glycol) (PEG) lead to grafting layers that detach from the silica surface and dissolve in water within a few days. We present a new grafting procedure of PEG onto silica with a significant improvement of the stability of the grafting layers in aqueous solvents. Moreover, the procedure avoids any dry states or other circumstances leading to strong aggregation of the particles. To achieve the improved water stability, St?ber silica particles are first pre-coated with a silane coupling agent (3-aminopropyl)triethoxysilane (APS) to incorporate active amine groups. The water solubility of the pre-coating layer was minimized using a combination of APS with bis-(trimethoxysilylpropyl)amine (BTMOSPA) or bis-(triethoxysilyl)ethane (BTEOSE). These pre-coated particles were then reacted with N-succinimidyl ester of mono-methoxy poly(ethylene glycol) carboxylic acid to form PEG-grafted silica particles. The particles form stable dispersions in aqueous solutions as well as several organic solvents.     

Monodisperse hollow titania nanospheres prepared using a cationic colloidal template

Titania-coated polymeric nanoparticles were synthesized based on the cationic colloidal particles which were prepared by surfactant-free emulsion copolymerization of styrene and butylacrylate in the presence of a cationic monomer, methacryloxyethyltrimethyl ammonium chloride (MOTAC) using azobis(isobutylamidine)hydrochloride (AIBA) as an initiator. These cationic particles were stabilized by poly(vinylpyrrolidone) (PVP). Then, these particles were dispersed in ethanol and mixed with titanium(IV) butoxide. Negatively charged titania precursors were rapidly hydrolyzed onto the cationic surfaces of colloidal particles. Subsequently, the samples were heated to 450 degrees C to form anatase TiO2 and to remove the colloidal template, which resulted in hollow nanospheres. The hollow titania particles were characterized with zeta analyzer, transmission electron microscopy, scanning electron microscopy, light scattering, X-ray diffraction, thermogravimetric analysis and FT-IR.     

Preparation and properties of biocompatible polymer-grafted silica nanoparticle

Grafting of biocompatible polymer onto the surface of silica nanoparticles was achieved by radical graft polymerization of 2-methacryloyloxyethyl phosphorylcholine (MPC), initiated by azo groups previously introduced onto the surface or by a system consisting of Mo(CO)₆ and trichloroacetyl groups on the silica surface. Both of these systems have the ability to initiate graft polymerization of MPC, resulting in the formation of poly(MPC)-grafted silica, but the percentage of poly(MPC) grafting for the latter initiating system was much higher than that of the former. The amount of moisture that could be adsorbed onto the silica surface was found to increase with increasing poly(MPC) grafting. This indicates that grafting of poly(MPC) onto the silica surface markedly increases the hydrophilic nature of the surface. The contact angle of water in composites prepared from poly(vinyl alcohol) and poly(MPC)-grafted silica was found to decrease with increasing poly(MPC)-grafted silica content. When poly(MPC)-grafted silica was added to water containing a small amount of chloroform, it was found to act as stabilizer for droplets of chloroform. In addition, according to tests by the Lee-White method, poly(MPC)-grafted silica shows non-thrombogenic characteristics.     

Temperature-Triggered Modification of Polymer- Solvent Interactions: From Fluid-to-Gel Transitions to Particle Capture

Temperature-responsive polymers are of considerable interest in the literature. In this work the ability to combine temperature-responsive polymer-solvent interactions with architectural control to achieve a range of macroscopic effects is considered. The first part of the work considers poly(DEA) (N,N-dieth ylacrylamide) microgel particles. The particles exhibit temperature-triggered particle collapse at temperatures more than ca. 27 °C. As a consequence concentrated temperature-responsive microgel dispersions change from gels to fluids when heated. The opposite effect is observed when dispersions or emulsions are stabilised by temperature-responsive polymer surfactants. Recent results involving a gel-forming castor oil-in-water emulsion are considered. The gelled emulsion releases a model drug (lidocaine) according to first-order kinetics. We extend the principle of temperature-triggered control of particle-surface interactions to test a new approach for immobilising particles on surfaces. The method consists of electrodepositing Laponite particles onto a carbon surface, grafting of poly(NIPAM) (N-isopropylacrylamide) onto the deposited particles and then increasing the temperature of the modified surface to trigger capture of dispersed polystyrene particles. This new approach uses chemistry that is potentially applicable to any conductive surface.     

Radiation initiated grafting onto fluoro polymers for membrane preparation II

A study has been made for the preparation of membranes by the post radiation grafting of acrylamide (AAm) onto poly(tetrafluoroethylene) (PTFE), films. The appropriate reaction conditions were selected under which the graft polymerization was carried out successfully. In this grafting system ammonium ferrous sulphate (Mohr's salt) was used as inhibitor to minimize the homopolymerization of AAm and a suitable concentration of the inhibitor to be added to the reaction medium was found to be 0.05 wt%. The effect of monomer concentration, radiation intensity and temperature on the rate and final degree of grafting was investigated. Increasing grafting temperature rises the initial grafting rate, whereas the final grafting yield increases with temperature up to 45°C, and then declines. This behaviour was described by the influence of glass transition on the rate of termination in the semicrystalline polymer. The overall activation energy for this grafting system was found to be 14.6 and 44.5 kcal/mol above and below 35°C, respectively. Some selected properties of the graft copolymer were studied. It was found that the grafted membranes possess good mechanical and electrical properties and excellent chemical and thermal stability which makes them very promising in practical applications.     

Monodisperse porous polymer particles with polyionic ligands for ion exchange separation of proteins

A new “grafting to” strategy was proposed for the preparation of polymer based ion exchange supports carrying polymeric ligands in the form of weak or strong ion exchangers. Monodisperse porous poly(glycidyl methacrylate-co-ethylene dimethacrylate), poly(GMA-co-EDM) particles 5.9 μm in size were synthesized by “modified seeded polymerization”. Poly(2,3-dihydroxypropyl methacrylate-co-ethylene dimethacrylate), poly(DHPM-co-EDM) particles were then obtained by the acidic hydrolysis of poly(GMA-co-EDM) particles. The hydroxyl functionalized beads were treated with 3-(trimethoxysilyl)propyl methacrylate to have covalently linked methacrylate groups on the particle surface. The selected monomers carrying weak or strong ionizable groups (2-acrylamido-2-methyl-1-propane sulfonic acid, AMPS; 2-dimethylaminoethylmethacrylate, DMAEM and N-[3-(dimethylamino)propyl] methacrylamide, DMAPM) were subsequently grafted onto the particles via immobilized methacrylate groups. The final polymer based materials with polyionic ligands were tried as chromatographic packing in the separation of proteins by ion exchange chromatography. The proteins were successfully separated both in the anion and cation exchange mode with higher column yields with respect to the previously proposed materials. The plate heights obtained for poly(AMPS) and poly(DMAEM) grafted poly(DHPM-co-EDM) particles by using proteins as the analytes were 80 and 200 μm, respectively. Additionally, the plate height exhibited no significant increase with the increasing linear flow rate in the range of 1–20 cm/min. The most important property of the proposed strategy is to be applicable for the synthesis of any type of ion exchanger both in the strong and weak form.     

Irradiation Initiated Grafting of Poly（butyl acrylate） onto Nano-sized Calcium Carbonate Particles

The present work reports the irradiation induced grafting polymerization onto nano-sized CaCO3 particles, mainly focusing on the effects of pretreatment with silane coupling agent. It is proved that poly(butyl acrylate) can be grafted onto the nanoparticles using the technical route suggested by the authors, and the silane treatment of the nanoparticles promotes the grafting polymerization.     

Preparation and characterization of a strong basic anion exchanger by radiation-induced grafting of styrene onto poly(tetrafluoroethylene) fiber

A novel anion-exchange fiber with strong basic groups has been prepared by grafting styrene onto poly(tetrafluoroethylene) fibers via irradiation. Experiments were carried out to analyze the effects of synthesis conditions on the grafting degree and to characterize the physicochemical properties of the anion-exchange fibers. The experimental results showed that preirradiation grafting styrene onto poly(tetrafluoroethylene) fiber could significantly reduce the waste of raw material and the formation of homopolymer, although the grafting degree was relatively low. The grafting reaction could be effectively enhanced through the addition of magnesium powder into the reaction system. The optimal temperature and time for preirradiation grafting were 80 degrees C and 6 h, respectively. The experimental results also showed that the anion-exchange fibers had excellent mechanical properties and thermal stability at a temperature up to 420 degrees C. The fibers were stable in acidic, alkali, and oxidative solutions. The static ion-exchange capacity of the fibers was as high as 6.08 mmol/g. The static adsorption capacities for Cr(2)O(2-)(7) and MnO(-)(4) ions were 214.08 and 290.98 mg/g, respectively.     

肿瘤酸度响应性聚(L-赖氨酸)-阿霉素键合药的制备与表征

用丁二酸酐(SA)和顺式乌头酸酐(CA)分别对阿霉素(DOX)进行修饰, 得到非酸响应的SA-DOX(SAD)和酸响应的CA-DOX(CAD). 通过SAD或CAD、端羧基化的聚乙二醇单甲醚(mPEG-COOH)与聚(L-赖氨酸)(PLL)的缩合反应, 制得非酸响应的PLL-g-mPEG/SAD和酸响应的PLL-g-mPEG/CAD键合药. 通过核磁共振氢谱和红外光谱表征键合药的化学结构, 并通过紫外-可见分光光度计测定药物键合量. 动态激光光散射研究结果表明, 两亲性的PLL-DOX键合药可以在pH=7.4的磷酸缓冲溶液中自组装形成稳定的纳米微粒. 体外释放实验及噻唑蓝检测结果表明, PLL-g-mPEG/SAD在实验pH范围和时间段内只释放出少量DOX, 不具有酸响应特性, 且对HeLa细胞增殖抑制作用较小. 而PLL-g-mPEG/CAD在生理条件(pH=7.4)下相对稳定, 在弱酸性条件(pH=5.3, 6.8)下, CAD中酸响应的酰胺键能快速水解并释放出DOX, 表现出较强的HeLa细胞增殖抑制效果.     

Efficient synthesis of poly(2-vinylpyridine)-silica colloidal nanocomposite particles using a cationic azo initiator

Colloidal poly(2-vinylpyridine)-silica nanocomposite particles can be efficiently prepared by emulsion polymerization at 60 degrees C using a commercial 20 nm aqueous silica sol as the sole stabilizing agent. Unlike previously reported colloidal nanocomposite syntheses, transmission electron microscopy studies indicate very high silica aggregation efficiencies (88-99%). The key to success is simply the selection of a suitable cationic azo initiator. In contrast, the use of an anionic persulfate initiator leads to substantial contamination of the nanocomposite particles with excess silica sol. The cationic azo initiator is electrostatically adsorbed onto the anionic silica sol at submonolayer coverage, which suggests that surface polymerization may be important for successful nanocomposite formation. Moreover, the 2-vinylpyridine can be partially replaced with either styrene or methacrylic comonomers to produce a range of copolymer-silica nanocomposite particles. The poly(2-vinylpyridine)-silica nanocomposite particles have a well-defined core-shell morphology, with poly(2-vinylpyridine) cores and silica shells; mean diameters typically vary from 180 to 220 nm, and mean silica contents range from 27 to 35% by mass.     

Cationic graft copolymerization of styrene onto poly(vinyl chloride) initiated by phosphorus trichloride

The effect of some organic halides on the cationic polymerization of styrene (St) initiated by phosphorus trichloride (PCl₃) was studied to clarify the initiation mechanism on the cationic polymerization. Addition of organic halides caused an acceleration to some extent. Further, cationic graft copolymerization of St onto poly(vinyl chloride) and polychloroprene was carried out. In each case, grafting efficiency was lower than 10%. These results in the cationic polymerization of St by PCl₃ in nitrobenzene support the assumption that the initiation step is caused by the dissociation of two molecules of PCl₃ to ion pairs.     

Synthesis of pH-responsive polysilane with polyelectrolyte side chains through γ-ray-induced graft polymerization

Polysilanes with polyelectrolyte side chains are synthesized by two methods utilizing γ-ray-induced grafting and the pH responsiveness for one of those polymers is revealed mainly by investigating interfacial behavior of its monolayer at the air/water interface. In the first synthetic method, poly(methyl acrylate) is grafted onto poly(methyl-n-propylsilane) (PMPrS) through γ-ray-induced grafting, and then the PMA chains are hydrolyzed to poly(acrylic acid) resulting in the yield of ca. 97%. Thus PMPrS with polyelectrolyte side chains is successfully synthesized by the graft chain hydrolysis. The other method is the direct grafting of electrolyte monomers. Poly(methacrylic acid)-grafted PMPrS (PMPrS-g-PMAA) can be obtained through γ-ray-induced grafting of methacrylic acid monomers onto PMPrS chains, which shows the effectiveness of radiation grafting for the synthesis of polyelectrolyte graft copolymers. PMPrS-g-PMAA exhibits pH responsive behavior. In addition to the pH-dependence of water solubility, interfacial behavior also depends on the pH. Langmuir monolayers of PMPrS-g-PMAA exhibit different surface pressure-area isotherms according to the grafting yield and the pH of the subphase water. This result suggests that radiation modification is useful for fabricating polysilane-based ordered materials responsive to outer stimuli.