Atomization mechanism and determination of Ag,Be, Cd,Li, Na,Sn and Zn in uranium-plutonium matrices by ETA-AAS

The atomization processes involved in the Electrothermal Atomization-Atomic Absorption Spectrometric (ETA-AAS) determination of Ag, Be, Cd, Li, Na, Sn and Zn in the presence of an uranium-plutonium matrix containing 25% Pu have been investigated. The significant fall in the absorbance signal for Ag, Cd, Na and Zn in an uranium matrix and its restoration in the presence of plutonium is probably correlated with the change in the partial pressure of oxygen released from the matrix at/below the signal appearance temperature (T(app)). In case of Li and Sn, the signal remains unaffected irrespective of the U-Pu matrix which might be due to a high T(app) for these analytes. Regarding Be, the steep suppression of the signal in the presence of the plutonium matrix compared to an uranium matrix can be ascribed to the formation of stable Pu-Be compounds (PuBe(13)). Based on these studies, analytical procedures have been developed for the direct determination of nanogram amounts of these analytes in an U-Pu matrix with an average precision of 9% RSD.     

Electrothermal atomization atomic absorption spectrometric determination of trace metals in uranium-plutonium fuel materials

Summary Atomic absorption spectrometric methods using the electrothermal mode of atomization developed for the determination of Ag, Be, Ca, Cd, Cr, Co,Cu, Fe, Li, Mn, Na, Ni, Sn and Zn in (U, Pu) solution with 4% plutonium have been described. The carbon rod atomizer has been adapted for glove box operation to enable handling of plutonium containing solution samples. Multielement solution standards with graded concentrations of the analytes and fixed concentration of the matrix are used in the standardization process. Nanogram to sub-nanogram quantities of the analytes have been determined with a precision of better than 9% RSD using 5 l of the sample aliquots.

---

Bestimmung von Metallspuren in Uran-Plutonium-Kernbrennstoffen mit Hilfe der ETA-AAS

     

Determination of trace elements of some Egyptian crops by instrumental neutron activation,inductively coupled plasma-atomic emission spectrometric and flameless atomic absorption spectrophotometric analysis

Instrumental neutron activation analysis was used for the determination of Al, Br, Ca, Ce, Cl, Co, Cr, Cs, Eu, Fe, K, La, Mg, Mn, Na, Rb, Sb, Sc, Se, Ti, Th, V and Zn, ICP-AES for the determination Al, Ag, Ba, Be, Ca, Co, Cr, Cu, Fe, Ga, K, Li, Mg, Mn, Na, Ni, P, Sc, Sr, Ti, V and Zn and flameless AAS for the determination of Cd, Hg and Pb in egg plant, potatoes, green pepper (Leguminosae), vegetable marrow (Cucurbitaceae), pears, apple (Rosaceae), castor oil plant (Euphorbiaceae), lettuce (compositae), dill, parsley, coriander (Umbelliferae), and in some soil samples collected from Aswan province.     

Determination of trace elements in Egyptian cane sugar (Deshna Factories) by neutron activation,atomic absorption spectrophotometric and inductively coupled plasma-atomic emission spectrometric analysis

Multielemental instrumental neutron activation (INAA), inductively coupled plasmaatomic emission spectrometric (ICP-AES) and atomic absorption spectrophotometric (AAS) analyses are utilized for the determination of Ag, Al, As, Au, Ba, Be, Br, Ca, Cd, Ce, Cl, Co, Cr, Cu, Eu, Fe, Ga, Hf, K, La, Li, Lu, Mg, Mn, Na, Nb, Ni, P. Pb, Sb, Sc, Se, Sm, Sn, Sr, Ta, Th, Ti, U, V, W and Zn in sugar cane plant, raw juice, juice in different stages, syrup, deposits, molasses, A, B and C sugar, refinery 1 and 2 sugar, and in soil samples picked up from the immediate vicinity of the cane plant roots at surface, 30 and 60 cm depth.     

Trace metal assay of U(3)O(8) powder by electrothermal AAS

Methods have been developed for the direct determination of Ag, Ca, K., Li, Mg, Na, Pb, Sn and Zn in U(3)O(8) powder samples by electrothermal AAS. Nanogram and lower amounts of these elements have been determined with a relative standard deviation of 6-16% in mg amounts of sample (either alone or mixed with an equal weight of graphite). The results for NBL reference samples were in reasonable agreement with the certified values. X-Ray diffraction studies on the residues left from the graphite mixtures after the atomization cycle, confirmed the formation of uranium carbide (UC(2)).     

Individual determination of uranium and plutonium in a single aliquot

Studies on the individual potentiometric determination of uranium and plutonium in a single aliquot have been initiated recently in our laboratory. It was required to adapt the reported procedures (for the precise determination of uranium and plutonium individually when present together in a sample) at various stages to make them suitable for the successive application of the procedures to the same aliquot. Two alternative schemes are proposed in the present work. In the first, plutonium is determined by HClO₄ oxidation followed by the determination of total uranium and plutonium by Zn(Hg) reduction. In the second, plutonium is determined by AgO oxidation following the determination of total uranium and plutonium by Zn(Hg) reduction. Amount of uranium is computed in both cases from the difference of two determinations. Precision for the assay of plutonium and uranium was found to be ±0.25% and ±0.35%, respectively, at milligram levels.     

Selective volatilisation of trace metals from refractory solids into an inductively coupled plasma

Feasibility studies have been carried out on the use of a graphite electrode assembly for the introduction of U₃O₈ solid samples into a continuously running low-powered argon inductively coupled plasma for the assay of trace metallic elements in uranium. The d.c. arc carrier distillation procedure has been adopted here for the selective volatilisation of analyte elements from the refractory matrix by injecting analyte vapours into the central zone of the plasma using Scribner-Mullin electrodes covered with a graphite lid having a central opening. The experimental parameters have been optimised for the direct determination of B, Be, Cd, Co, Cr, Cu, Fe, K, Li, Mn, Na, Ni and Pb in U₃O₈ powders. The analytical performance of the method has been checked by analysing spiked U₃O₈ samples and is seen to be comparable to or better than d.c. arc methods for these analytes. These results indicate that the carrier-distillation-ICP combination shows promise as a sensitive and precise method for analysis of trace metallic elements in a refractory matrix with a complex spectrum.     

Spectral interference study of uranium on other analytes by using CCD based ICP-AES

Due to the multi-electronic nature, uranium is having line rich emission spectra and is expected to interfere during the determination of analytes at the trace level in uranium matrix. Therefore, chemical separation of uranium followed by the determination of trace metallic impurities in the raffinate by ICP-AES is generally adopted procedure in nuclear industries. There is restriction on choosing alternate analytical lines of elements by photomultiplier tube based ICP-AES associated with the polychromator while monochromator needs significant time to scan different analytical lines of all the elements. Since charged coupled detector (CCD) consists of array of pixels, it is having more option in choosing alternative analytical lines of the analytes. Therefore, an attempt was made to study the spectral interference of uranium on different analytical lines of analytes viz. Al, Ga, In, Si, Li, Ti, Mg, Sr, K, Ce, Nd, Lu, Sc, V, Er, Y, Ba, Bi, Pb, W, La, Tl, Sn, Yb, Mo, Sb, Pr and Zr; and the correction factors were evaluated (where ever necessary) using CCD based ICP-AES technique. The sensitivity and the detection limits of the analytical channels of the elements in presence of uranium matrix were calculated. The present study also deals with the identification of suitable analytical lines of uranium and its detection limits.     

微波消解/电感耦合等离子体质谱法同时测定食品纸包装材料与食品模拟物中24种元素

建立了微波消解/电感耦合等离子体质谱(ICP-MS)同时检测食品纸包装材料及3种食品模拟物(纯水、4%乙酸、10%乙醇)中Li,Be,B,Al,V,Cu,Mn,Zn,Cr,Ni,As,Sr,Zr,Se,Mo,Ag,Cd,Sn,Sb,Te,Ba,Hg,Tl,Pb 24种元素的分析方法,并对元素的迁移行为进行了研究。包装材料样品经微波消解后利用ICP-MS检测;迁移试验中的食品模拟物直接利用ICP-MS检测。在优化实验条件下,24种元素在0~1 000μg/L范围内线性关系良好;方法检出限(MLOD)为0.000 3~0.465 mg/kg;在1.0~1 000 mg/kg加标水平下的平均回收率为90.5%~125.3%;相对标准偏差(RSD,n=3)为1.2%~6.8%。该方法前处理简便、灵敏准确、适用范围广,可用于食品纸包装材料中元素含量的测定及迁移行为的研究,从而为食品纸包装材料的质量监督提供了科学依据。     

Study on the hydride generation atomic absorption spectrometry of As, Sb, Bi, Se, Sn, Te and Hg in the presence of cadmium and zinc salts

Summary HG-AAS of As, Sb, Bi, Se, Sn, Te and Hg in the presence of Cd or Zn salts has been studied. It has been found that there is an interference effect on the AAS signal in the presence of these salts. In each case the interference by Cd salts is stronger than that by Zn salts. The decrease of the Te signal in the presence of Cd salts is considerable.     

Matrix effects on the multi-collector inductively coupled plasma mass spectrometric analysis of high-precision cadmium and zinc isotope ratios

Resin-derived contaminants added to samples during column chemistry are shown to cause matrix effects that lead to inaccuracy in multi-collector inductively coupled plasma mass spectrometry measurement of small natural variations in Cd and Zn isotopic compositions. These matrix effects were evaluated by comparing pure Cd and Zn standards and standards doped with bulk column blank from the anion exchange chromatography procedure. Doped standards exhibit signal enhancements (Cd, Ag, Zn and Cu), instrumental mass bias changes and inaccurate isotopic compositions relative to undoped standards, all of which are attributed to the combined presence of resin-derived organics and inorganics. The matrix effect associated with the inorganic component of the column blanks was evaluated separately by doping standards with metals at the trace levels detected in the column blanks. Mass bias effects introduced by the inorganic column blank matrix are smaller than for the bulk column blank matrix but can still lead to significant changes in ion signal intensity, instrumental mass bias and isotopic ratios. Chemical treatment with refluxed HNO₃ or HClO₄/HNO₃ removes resin-derived organic components resulting in matrix effects similar in magnitude to those associated with the inorganic component of the column blank.Mass bias correction using combined external normalization-SSB does not correct for these matrix effects because the instrumental mass biases experienced by Cd and Zn are decoupled from those of Ag and Cu, respectively. Our results demonstrate that ion exchange chromatography and associated resin-derived contaminants can be a source of error in MC-ICP-MS measurement of heavy stable element isotopic compositions.     

Determination of trace impurities in uranium, thorium and plutonium matrices by solvent extraction and inductively coupled plasma atomic emission spectrometry

Studies on the determination of trace metallic impurities in nuclear materials such as uranium, thorium and plutonium are described. The bulk of the matrix is separated by batch extraction from their nitric acid solutions using 2-ethylhexyl hydrogen 2-ethylhexyl phosphonate (KSM-17, equivalent to PC88-A). The final aqueous phase containing the metallic impurities is fed to a high-temperature source inductively coupled plasma and the analysis is carried out employing a computer-controlled multichannel direct-reading spectrometer. The studies also included the recovery of impurities at various acidities and spectral interferences of the above matrices over the analyte elements. Based on the above studies, methods were standardized for the determination of 19 elements, viz. Al, B, Be, Ca, Cd, Cr, Cu, Fe, Mg, Mn, Ni, Pb, Si, Zn, Ce, Dy, Eu, Gd and Sm, in U/Th/Pu solutions. The relative standard deviation for various elements is in the range 1-5%.     

Determination of analytes at trace level in uranium matrix by ICP-AES without chemical/physical separation

Determination of trace metallic constituents in nuclear materials e.g. U, Pu, Am, Zr etc. by Atomic Emission Spectroscopy requires the separation of the major matrix without the loss of analytes at trace level. For DC Arc carrier distillation technique, carrier is used to separate the matrix physically according to the volatility of the analytes while appropriate extractant in suitable diluent is used for chemical separation in inductively coupled plasma atomic emission spectroscopy (ICP-AES). In the present study an attempt was made to develop a methodology for the determination of B, Cd, Mg, Zn, Al, Sr and Sc at trace level (up to 0.1 μg/mL) in uranium matrix without any chemical or physical separation. It involves identification of suitable analytical lines of uranium for its ICP-AES determination; study the spectral interference of uranium to choose interference free analytical lines, optimization of instrumental and experimental parameters etc. The method was validated using synthetic samples.     

Bestimmung von Spurenelementen in Rein-Titan durch ICP-AES ohne und mit Spuren-Matrix-Trennung

Summary Procedures for the analysis of titanium metal after dissolution in HF and HNO₃ are described. The 3 -detection limits (DL) for the determination with sequential AES in solutions of 1% titanium are about 100 ng/mL for many analytes. Investigation of the matrix interferences shows that removal of the matrix by one decade to 0.1% Ti improves DL by about 2–3 decades. Using the chelating ion exchanger Cellulose-HYPHAN in combination with hexamethylene dithiocarbamidate (HMDC) in a batch technique, the enrichment rate for the analytes Cu, Fe, Ni, Pb and V is better than 88%. Furthermore the elements Cd, Co and Zn are enriched if Chelex 100 is used in the batch mode. In a column technique 17 elements (Ag, Al, Ba, Ca, Cd, Co, Cu, Fe, Ga, In, Mg, Mn, Ni, Sn, Th, V, Zn) can be determined with enrichment rates better than 89%. Pb and Sr are collected by about 70%. Detection limits of about 1 to 10 ng/mL in the solution can be achieved (dilution factor of the metal sample about 20).     

Ternäre Verbindungen des Lithiums und Natriums mit Mangan und Elementen der 5. Hauptgruppe

Es wird über Darstellung und Kristallstruktur ternärer AMnX-Verbindungen (A ? Li, Na; X ? P, As, Sb, Bi) berichtet. Sie kristallisieren tetragonal in Raumgruppe P4/nmm-D_4h⁷, wobei sich LiMnX und NaMnX durch unterschiedliche Punktlagen der Alkaliatome unterscheiden. Die AMnX-Strukturen werden mit denen verwandter AMX-Verbindungen verglichen (A ? Li, Na, K, Rb; M ? Be, Mg, Zn, Cd; X ? 5b-Element). Ternary Compounds of Lithium and Sodium with Manganese and Elements of the Fifth Main Group Formation and crystal structure of ternary AMnX compounds (A ? Li, Na; X ? P, As, Sb, Bi) are reported. These compounds crystallize in the tetragonal space group P4/nmm-D. The structures of LiMnX and NaMnX differ by the positions of the alkali atoms. Structural relationship to AMX compounds (A ? Li, Na, K, Rb; M ? Be, Mg, Zn, Cd; X ? 5b element) are discussed.     

Evaluation of strontium isotope abundance ratios in combination with multi-elemental analysis as a possible tool to study the geographical origin of ciders

In order to evaluate alternative analytical methodologies to study the geographical origin of ciders, both multi-elemental analysis and Sr isotope abundance ratios in combination with multivariate statistical analysis were estimated in 67 samples from England, Switzerland, France and two Spanish regions (Asturias and the Basque Country). A methodology for the precise and accurate determination of the ⁸⁷Sr/⁸⁶Sr isotope abundance ratio in ciders by multicollector inductively coupled plasma mass spectrometry (MC-ICP-MS) was developed. Major elements (Na, K, Ca and Mg) were measured by ICP-AES and minor and trace elements (Li, Be, B, Al, Sc, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Ga, As, Se, Rb, Sr, Y, Mo, Cd, Sn, Sb, Cs, Ba, La, Ce, W, Tl, Pb, Bi, Th and U) were measured by ICP-MS using a collision cell instrument operated in multitune mode. An analysis of variance (ANOVA test) indicated that group means for B, Cr, Fe, Ni, Cu, Se, Cd, Cs, Ce, W, Pb, Bi and U did not show any significant differences at the 95% confidence level, so these elements were rejected for further statistical analysis. Another group of elements (Li, Be, Sc, Co, Ga, Y, Sn, Sb, La, Tl, Th) was removed from the data set because concentrations were close to the limits of detection for many samples. Therefore, the remaining elements (Na, Mg, Al, K, Ca, Ti, V, Mn, Zn, As, Rb, Sr, Mo, Ba) together with ⁸⁷Sr/⁸⁶Sr isotope abundance ratio were considered for principal component analysis (PCA) and linear discriminant analysis (LDA). Finally, LDA was able to classify correctly 100% of cider samples coming from different Spanish regions, France, England and Switzerland when considering Na, Mg, Al, K, Ca, Ti, V, Mn, Zn, As, Rb, Sr, Mo, Ba and ⁸⁷Sr/⁸⁶Sr isotope abundance ratio as original variables.     

Optimization of sample preparation and ICP-MS analysis for determination of 60 elements for characterization of the plant ionome

An ICP-MS method for determination of 60 elements in plant samples is proposed based on optimization of digestion, recommending use of HF besides HNO₃ and H₂O₂ and calibration procedures, using CRMs for construction of calibration curves. Adequate choice of analytical isotopes and various measurement conditions (cold plasma for the determination of Al, Ba, Ca, Fe, K, Mg, Mn, Na, Si and Sr and DRC mode for determination of Ag, As, Ni, Pd, Pt, Se and V) as well as introduction of appropriate corrections lead to determination of as large number of elements with quadropole ICP-MS as with the more expensive SF-ICP-MS. Two measurements are performed: cold plasma and standard/DRC mode. The analytical characteristics of the method are demonstrated by analysis of five CRMs and the agreement of the experimental results with the certified/information/literature values is very good. Detection limits are low enough to permit the determination of all elements but platinum metals at background level. The applicability of the method is demonstrated by analysis of Taraxacum officinale (dandelion) samples collected from regions with different anthropogenic influence. The results indicate high degree of pollution round the Pb-Zn smelter with As, Cd, Cu, Ni, Pb and Zn and increased concentrations of B, Be, Bi, Hg, In, Mn, Sb, Se, Sn, Ti, Tl, V and Zr. The dandelion sample, collected along a highway has increased concentrations of traffic released elements: Pt, Pd, Rh, Ce, La, Pb as well as Cu, Zn, Ba and Rb.     

On atomization of uranium in plutonium matrix using ETA-AAS

Atomization processes for uranium in aqueous media and in the presence of a plutonium matrix have been studied and a chemical mechanism is proposed. These studies have been utilized for the determination of uranium in plutonium by Electrothermal Atomization- Atomic Absorption Spectrometry (ETA-AAS) within the constraints of its stable carbide forming tendency and complexity caused by formation of plutonium suboxide at high temperatures. In spite of these limitations the analytical range obtained for determination of uranium is 2.5–100 ng with a sample aliquot of 5 μL containing 5 mg/mL plutonium concentration. The precision of the method is evaluated as 9% RSD. Received: 9 September 1997 / Revised: 29 December 1997 / Accepted: 31 December 1997     

Determination of trace level impurities in uranium compounds by ICP-AES after organic extraction

The determination was studied of Al, B, Be, Cd, Ca, Co, Cu, Mg, Mn, Mo, Pb, Si, Sn, V, Cr, Ni, and Fe as trace level impurities in uranium compounds by ICP-AES after extraction of uranium with three different mixtures of di-(2-ethyl-hexyl) phosphate (D2EHP) and tri-(2-ethyl-hexyl)-phosphate (T2EHP) in solvents like toluene, carbon tetrachloride, hexane and cyclohexane. The study was carried out in presence of different concentrations of HCl and HNO₃. A single extraction with D2EHP in cyclohexane using nitric acid as matrix was sufficient to reduce the U₃O₈ concentration from 100 g/l to 100 g/ml. The ICP-AES instrumentation applied, allowed the determination of metal concentrations ten-times lower than those usually found in nuclear grade U₃O₈. To check the efficiency of the extraction and the accuracy of the proposed method, Certified Reference Materials were used in the dissolution and extraction steps. The method described can be used for the determination of trace metals in nuclear grade U₃O₈.