A Dual-Target Fluorescent Probe with Response-Time Dependent Selectivity for Cd<Superscript>2+</Superscript> and Cu<Superscript>2+</Superscript>

A novel fluorescent probe (NT) was developed by merging 2-hydrazinylbenzothiazole with 2-hydroxy-1-naphthaldehyde for the detection of Cd²⁺ and Cu²⁺. The probe alone is almost nonfluorescent due to the isomerization of C=N in the excited state. The addition of Cd²⁺ can cause an immediate strong green fluorescence owing to the suppression of C=N isomerization by Cd²⁺-coordination. Furthermore, NT gives a delayed turn-on fluorescence response to Cu²⁺ although it is a vigorous fluorescence quencher, which was thanks to the inhibition of the electron transfer between excited fluorophore and paramagnetic Cu²⁺ by sulfur donor. Based on fluorescence spectra and ESI-MS analysis, the binding modes between NT and Cd²⁺/Cu²⁺ were proposed.     

A Colorimetric and Fluorescent Indicator for Hg<Superscript>2+</Superscript> Detection Based on Cinnamamide Group-Containing Rhodamine Derivative

A colorimetric and fluorescent indicator based on cinnamamide group-containing rhodamine derivative was synthesized for the detection of Hg²⁺. The rhodamine B and cinnamamide were connected via ethylenediamine as a bridging molecule through a condensation reaction to obtain a colorimetric and fluorescent indicator for the detection of Hg²⁺ in H₂O-EtOH (4:1, v/v). The indicator was excellent in the selectivity of Hg²⁺ and was almost unaffected by other common ions such as Na⁺, K⁺, Mg²⁺, Fe³⁺, Cu²⁺, Zn²⁺, Cr³⁺. The Hg²⁺-containing aqueous solution turned from colorless to red within 7 min after the addition of the indicator, and had an absorption peak at 564 nm in UV-vis, which implies a significant colorimetric phenomenon. Their characteristic peaks varied with the Hg²⁺ content, and they reached a linear relationship at low concentrations. The binding stoichiometry proved to be 1:1. The lowest detection limit was 4.1?×?10^?7 mol/L, ranging from acidic to neutral.     

A Ratiometric and near-Infrared Fluorescent Probe for Imaging Cu<Superscript>2+</Superscript> in Living Cells and Animals

We have rationally constructed a novel ratiometric and near-infrared Cu²⁺ fluorescent probe based on a tricarbocyanine chromophore. The new probe NIR-Cu showed a ratiometric fluorescent response to Cu²⁺ with a large emission wavelength shift (up to 142 nm) in the far-red to near-infrared region. The probe also displayed a large variation in the fluorescence ratio (I₆₃₆/I₇₇₈) to Cu²⁺ species with high sensitivity and selectivity. Additionally, the developed probe NIR-Cu was suitable for fluorescence imaging of Cu²⁺ in living cells and mice.     

A Novel Chemosensor Based on Rhodamine Derivative for Colorimetric and Fluorometric Detection of Cu<Superscript>2+</Superscript> in Aqueous Solution

A new rhodamine-based reversible chemosensor (2) was synthesized, which exhibits high sensitivity and selectivity for Cu²⁺ but no significant response toward other competitive metal ions in aqueous solution. Upon the addition of Cu²⁺, the spirolactam ring of 2 was opened and the solution color changed from colorless to red. Strangely, an unexpected fluorescence quenching was observed, which is contrary to the fluorescence turn-on of the most rhodamine-based chemosensors. The likely novel sensing mechanism has been proposed.     

A Turn-on Fluorescent Chemosensor for Zn<Superscript>2+</Superscript> Based on Quinoline in Aqueous Media

A simple “off-on fluorescence type” chemosensor 1 3-((2-(dimethylamino)ethyl)amino)-N-(quinolin-8-yl)propanamide has been synthesized for Zn²⁺. The receptor 1 comprises the quinoline moiety as fluorophore and the N,N^′-dimethylethane-1,2-diamine as a binding site. 1 showed a remarkable fluorescence enhancement in the presence of Zn²⁺ in aqueous solution. Importantly, the chemosensor 1 could be used to detect and quantify Zn²⁺ in water samples. In particular, this chemosensor could clearly distinguish Zn²⁺ from Cd²⁺. The binding properties of 1 with Zn²⁺ ions were investigated by UV-vis, fluorescence, electrospray ionization mass spectroscopy and ¹H NMR titration.     

Condensation Product of Phenylalanine and Salicylaldehyde: Fluorescent Sensor for Zn<Superscript>2+</Superscript>

The condensation product of phenylalanine and salicylaldehyde (L) was synthesised and characterised which was found to be selective fluorescent “off-on” sensor for Zn²⁺ ion with the detection limit 10^?5 M. The sensor is free of interferences from metal ions - Na⁺, K⁺, Al³⁺, Mn²⁺, Co²⁺, Ni²⁺, Cu²⁺, Pb²⁺, Cd²⁺ and Hg²⁺. The Fluorescence and the UV/visible spectral data reveals a 1:1 interaction between the sensor and Zn²⁺ ion with binding constant 10⁸. The DFT and TDDFT calculations confirm the structures of the sensor and the sensor-Zn²⁺ complex.     

A Coumarin-Based Fluorescent Chemosensor for Zn<Superscript>2+</Superscript> in Aqueous Ethanol Media

A coumarin-based fluorescent chemosensor 1 for Zn²⁺ was designed and synthesized. Compound 1 exhibits lower background fluorescence due to intramolecular photoinduced electron transfer. However, upon mixing with Zn²⁺ in 30% (v/v) aqueous ethanol, a “turn-on” fluorescence emission is observed. The fluorescence emission increases linearly with Zn²⁺ concentration in the range 0.5–10 μmol L⁻¹ with a detection limit of 0.29 μmol L⁻¹. No remarkable emission enhancement was, however, observed for other metal ions. The proposed chemosensor was applied to the determination of Zn²⁺ in water samples with satisfactory results.     

Bay Functionalized Perylenediimide with Pyridine Positional Isomers: NIR Absorption and Selective Colorimetric/Fluorescent Sensing of Fe<Superscript>3+</Superscript> and Al<Superscript>3+</Superscript> Ions

Bay functionalized perylene diimide substituted with pyridine isomers, (2-pyridine (2HMP-PDI), 3-pyridine (3-HMP-PDI) and 4-pyridine (4-HMP-PDI)) have been synthesized and explored for selective coloro/fluorimetric sensing of heavy transition metal ions. HMP-PDIs showed strong NIR absorption (760–765 nm) in DMF. The absorption and fluorescence of HMP-PDIs have been tuned by make use of pyridine isomers. Reddish-orange color was observed for 2-HMP-PDI (λ_max = 437, 551, 765 nm) whereas 4-HMP-PDI exhibited light green (λ_max = 432, 522, 765 nm). 3-HMP-PDI showed orange-yellow (λ_max = 431, 524, 762 nm). The fluorescence spectra of 2-, 3- and 4-HMP-PDI showed λ_max at 585, 538, 546 nm, respectively. Interestingly, HMP-PDI dyes showed selective color change (intense pink color) and fluorescence quenching for Fe³⁺ and Al³⁺ metal ions in DMF. Absorbance spectra revealed complete disappearance of NIR absorption and intensification/appearance of new peak at lower wavelength. The concentration dependent studies suggest that 4-HMP-PDI can detect up to 36.52 ppb of Fe³⁺ and 43.12 ppb of Al³⁺ colorimetrically. The interference studies in presence of other metal ions confirmed the good selectivity for Fe³⁺ and Al³⁺. The mechanistic studies indicate that Lewis acidic character of Fe³⁺ and Al³⁺ ions were responsible for selective color change and fluorescence quenching.     

A New bis(rhodamine)-Based Fluorescent Chemosensor for Fe<Superscript>3+</Superscript>

A new bis(rhodamine)-based fluorescent probe 4 was synthesized, and it exhibited high selectivity for Fe(3+) over other commonly coexistent metal ions in both 50% ethanol and Tris-HCl buffer. Upon the addition of Fe(3+), the spirocyclic ring of 4 was opened and a significant enhancement of visible color and fluorescence in the range of 500-600 nm was observed.     

Synthesis and Properties of a Novel FRET-Based Ratiometric Fluorescent Sensor for Cu<Superscript>2+</Superscript>

A novel FRET-based probe LS3 was designed and synthesized. As expected, it exhibited high selectivity and sensitivity for detecting Cu²⁺ over other commonly coexistent metal ions. The detection limit was measured to be 0.0423 μM for Cu²⁺, which can meet the selective requirements for practical application. In addition, the newly synthesized compound 3a/b have potential value of further synthesizing more analogous FRET-based probes.     

A Dansyl-Rhodamine Ratiometric Fluorescent Probe for Hg<Superscript>2+</Superscript> Based on FRET Mechanism

Based on resonance energy transfer (FRET) from dansyl to rhodamine 101, a new fluorescent probe (compound 1) containing rhodamine 101 and a dansyl unit was synthesized for detecting Hg²⁺ through ratiometric sensing in DMSO aqueous solutions. This probe shows a fast, reversible and selective response toward Hg²⁺ in a wide pH range. Hg²⁺ induced ring-opening reactions of the spirolactam rhodamine moiety of 1, leading to the formation of fluorescent derivatives that can serve as the FRET acceptors. Very large stokes shift (220 nm) was observed in this case. About 97-fold increase in fluorescence intensity ratio was observed upon its binding with Hg²⁺.     

Dual-Functional Fluorescein-Based Chemosensor for Chromogenic Detection of Fe<Superscript>3+</Superscript> and Fluorgenic Detection of HOCl

A novel fluorescein-based dual probe was designed and synthesized. The probe exhibited highly sensitive and selective colormetric response to Fe³⁺ and turn-on fluorescence response towards OCl^? with very low detection limits of 100 and 50 nM, respectively. It was successfully applied for quantitative detection of Fe³⁺ and OCl^? in real water samples. Moreover, probe 1 was expected to be a potentially powerful tool for studying and providing further insights into OCl^? and Fe³⁺ chemistry in the near future.     

An Intramolecular Charge Transfer Fluorescent Probe: Synthesis,Structure and Selective Fluorescent Sensing of Cu<Superscript>+2</Superscript>

A series of substituted imidazoles have been synthesized in very good yield under solvent free condition by grinding 1,2-diketone, aromatic aldehyde and ammonium acetate in the presence of molecular iodine as the catalyst. The short reaction time, good yield and easy workup make this protocol practically and economically attractive and characterized by NMR spectra, X-ray, mass and CHN analysis. An excited state intramolecular proton transfer (ESIPT) process in hydroxy imidazoles (dpip and dptip) have been studied using emission spectroscopy and it was detected that the two distinct ground state rotamers are responsible for the normal and the tautomer emissions. DFT calculations on energy, dipole moment, charge distribution of the rotamers in the ground and excited states of the imidazole derivatives were performed and discussed. DFT analysis about HOMO, HOMO-1, LUMO and LUMO + 1 were carried out and discussed. PES calculation indicates that the energy barrier for the interconversion of two rotamers is too high in the excited state than the ground state.     

Synthesis and Evaluation of a Schiff-Based Fluorescent Chemosensors for the Selective and Sensitive Detection of Cu<Superscript>2+</Superscript> in Aqueous Media with Fluorescence Off-On Responses

Copper being an essential nutrient; also pose a risk for human health in excessive amount. A simple and convenient method for the detection of trace amount of copper was employed using an optical probe R1 based on Schiff base. The probe was synthesized by Schiff base condensation of benzyl amine and 2-hydroxy-1-napthaldehyde and characterized by single X-ray diffraction, ¹H NMR and FTIR. By screening its fluorescence response in a mixture of DMSO and H₂O (20:80, v/v) R1 displayed a pronounced enhancement in fluorescence only upon treatment with copper. Other examined metal ions such as alkali, alkaline and transition had no influence. Within a wide pH range 5–12 R1 could selectively detect copper by interrupting ICT mechanism that results in CHEF. From Job’s plot analysis a 2:1 binding stoichiometry was revealed. The fluorescence response was linear in the range 1–10?×?10^?9 M with detection limit 30?×?10^?9 M. Association constant was determined as 1?×?10¹¹ M^?2 by Benesi-Hilderbrand plot. As a fast responsive probe it possesses good reproducibility and was employed for detection of copper in different water samples.     

Novel Fluorescent Molecular Clips: Selective Recognition Towards Fe<Superscript>3+</Superscript> in Aqueous Solution

In this paper, we report the synthesis, characterization and Fe³⁺-sensing properties of a series of new artificial fluorescent molecular clips, and structure of clip 1 is confirmed by X-ray crystallography. All these molecular clips had the ability to bind and sense Fe³⁺ selectively through decrease fluorescence responses in THF-MeOH-Water. Fluorimetric titration experiment indicated that the quenching of these compounds’ fluorescence upon Fe³⁺ probably arises from the electron/energy transfer between Fe³⁺ and the excited chemosensors. The limit of detection, linear concentration range and selectivity of the fluorescent molecular clips were evaluated in this study as well.     

8-Hydroxyquinoline Functionalized Graphene Oxide: an Efficient Fluorescent Nanosensor for Zn<Superscript>2+</Superscript> in Aqueous Media

A nanosensor, based on 8-hydroxyquinoline functionalized graphene oxide, was developed for the fluorescence detection of Zn²⁺. It showed high selectivity and sensitivity for Zn²⁺ion in aqueous solution over other metal ions such as Li⁺, Na⁺, Ca²⁺, Mg²⁺, Al³⁺, Cd²⁺, Co²⁺, Cu²⁺, Hg²⁺, Ni²⁺, Pb²⁺, Fe²⁺, Fe³⁺and Cr³⁺. Due to the linearity of the emission intensity toward Zn²⁺ concentration, fluorescent technique could be used for the detection of Zn²⁺ ion even at very low concentrations.     

Fluorescent carbon dots: facile synthesis at room temperature and its application for Fe<Superscript>2+</Superscript> sensing

A new route for one-pot preparation of carbon dots (CDs) was developed at room temperature using PEG400 as both the carbon source and passitive agent. The new method possesses the advantages of facile, rapid, energy-saving, without any external stimulus and environment friendly. By changing the content of NaOH, the PEG400-CDs with blue-emitting, yellow-emitting, orange red-emitting and red-emitting were obtained, and the formation mechanism were carefully investigated. In addition, a sensitive fluorescence sensor were developed for Fe²⁺ detection based on PEG400-CDs since the fluorescence of PEG400-CDs could be enhanced by Fe²⁺. It was found that there is a good linear relationship between the enhanced fluorescence and Fe²⁺ concentration in the range of 0.5 to 2.0 μmol·L^?1 with the detection limit of 6.0 × 10^?8 mol·L^?1, and Fe²⁺ in water samples was also determined with high accuracy and repeatability.     

Hexa-BODIPY Linked-Triazole Based on a Cyclotriphosphazene Core as a Highly Selective and Sensitive Fluorescent Sensor for Fe<Superscript>2+</Superscript> Ions

A new type of fluorescent chemosensor based on tethered hexa-borondipyrromethene cyclotriphosphazene platform (HBTC) linked via triazole groups was designed and synthesized. Its sensing behavior toward metal ions was investigated by ultraviolet-visible and fluorescence spectroscopies. Addition of a Fe²⁺ ion to a tetrahydrofuran solution of HBTC gave a visual color change as well as a significantly quenched fluorescence emission, while other tested 19 metal ions induced no color or spectral changes. This compound was found to be highly selective and sensitive for Fe²⁺ with a low limit of detection (2.03 μM) which is, to the best of our knowledge, the superior than the previously studied chemosensors for Fe²⁺.

Open image in new window

Graphical Abstract ?

     

Spectral Investigations on Cu<Superscript>2+</Superscript>-Doped ZnO Nanopowders

Cu²⁺-doped ZnO nanopowders, synthesized at room temperature by mild and simple solution method, are characterized by powder X-ray diffraction (XRD), scanning electron microscopy (SEM), optical, electron paramagnetic resonance (EPR) and Fourier-transform infrared (FT-IR) techniques. From XRD and SEM, the crystal structure is identified as hexagonal, and the average crystallite size is around 53 nm. Lattice cell parameters are evaluated. The optical and EPR spectral investigations suggest that the Cu²⁺ ion enters the host lattice in two tetragonally distorted octahedral sites. Crystal field, tetragonal field, spin Hamiltonian and bonding parameters are estimated.     

A highly Selective Fluorescent Sensor for Monitoring Cu<Superscript>2+</Superscript> Ion: Synthesis,Characterization and Photophysical Properties

A new fluorescent sensor, 4-allylamine-N-(N-salicylidene)-1,8-naphthalimide (1), anchoring a naphthalimide moiety as fluorophore and a Schiff base group as receptor, was synthesized and characterized. The photophysical properties of sensor 1 were conducted in organic solvents of different polarities. Our study revealed that, depending on the solvent polarity, the fluorescence quantum yields varied from 0.59 to 0.89. The fluorescent activity of the sensor was monitored and the sensor was consequently applied for the detection of Cu²⁺ with high selectivity over various metal ions by fluorescence quenching in Tris-HCl (pH = 7.2) buffer/DMF (1:1, v/v) solution. From the binding stoichiometry, it was indicated that a 1:1 complex was formed between Cu²⁺ and the sensor 1. The fluorescence intensity was linear with Cu²⁺ in the concentration range 0.5–5 μM. Moreso, the detection limit was calculated to be 0.32 μM, which is sufficiently low for good sensitivity of Cu²⁺ ion. The binding mode was due to the intramolecular charge transfer (ICT) and the coordination of Cu²⁺ with C = N and hydroxyl oxygen groups of the sensor 1. The sensor proved effective for Cu²⁺ monitoring in real water samples with recovery rates of 95–112.6 % obtained.