Computation of heat capacities of solid state benzene,p-oligophenylenes and poly-p-phenylene

Heat capacities (C_p) of solid benzene, biphenyl,p-terphenyl,p-quaterphenyl, and poly-p-phenylene were analyzed using the ATHAS Scheme of computation. The calculated heat capacities based on approximate vibrational spectra of solid benzene and the series of oligomers containing additional phenylene groups were compared to experimental data newly measured and from the literature to identify possible additional large-amplitude motion. The skeletal heat capacity was fitted to the Tarasov equation to obtain the one- and three-dimensional vibration frequencies ₁ and ₃ using a new optimization approach. Their relationship to the number of phenylene groupsn is: ₁=426.0–150.3/n; and ₃=55.4+81.8/n. Except for benzene, the quantitative thermal analyses do not show significant contributions from large-amplitude motion below the melting temperatures.This work was financially supported by the Div. of Materials Res., NSF, Polymers Program, Grant # DMR 90-00520 and Oak Ridge National Laboratory, managed by Lockheed Martin Energy Research Corp. for the U. S. Department of Energy, under contract number DE-AC05-96OR22464.     

Quasi-liquid composites based on poly(ethylene terephthalate) films with fullerene and dichlorobenzene

Quasi-liquid composites based on poly(ethylene terephthalate) (PET) films with 9 wt% solution of the C₆₀ (70%) and C₇₀ (∼30%) fullerenes mixture in dichlorobenzene (DCB) have been obtained. It has been shown that PET swelling in the fullerene solution in DCB is accompanied by penetration of fullerene into the polymer structure, and PET films are deformed by the mechanism of intercrystallite crazing. As has been revealed by UV spectroscopy, fullerene incorporated into composite remains monomeric as in solution.     

Polyaniline thin film optical waveguides for integrated optics and VLSI prepared by vacuum evaporation technique

Polyaniline is emerging as an important polymer material which offers challenging opportunities for both fundamental research and new technological applications in waveguides. Metal doped polyaniline has been prepared initially in the form of powder by a solution growth technique. The emeraldine salt with doped metal was also prepared by solution growth technique. This powder was used for vacuum evaporation on optically flat glass substrate. The dark green doped (Fe, Al) polyaniline thin films were prepared by vacuum evaporation technique (10^?4 torr). Deposited waveguide thin films have been characterized structurally, using X‐ray diffraction (XRD), optically etc. Effective refractive index of the thin film waveguide was also calculated theoretically and experimentally. Waveguide parameters, namely refractive index, propagation loss and depth of vacuum deposited polyaniline thin films optical waveguide have been determined. The optical spectra and structure and waveguide parameters of vacuum deposited polyaniline thin films are strongly affected by the type of doping. It is possible to reduce the losses by addition of Fe to the vacuum deposited polyanine thin film and modify the effective refractive index (O_eff) according to particular requirements. Results are compared with the results in the literature. Copyright © 2002 John Wiley & Sons, Ltd.     

Soluble substituted poly-p-phenylenes—A new material for application in light-emitting diodes

Poly-p-phenylenes have attracted a great deal of attention with respect to their applications in displays, light-emitting devices, and batteries. However, the polymer poly-p-phenylene obtained by the Kovacic method is insoluble and intractable. The present study reports the preparation of soluble poly(p-phenylenes) by polymerization of derivatives of benzene in the presence of a specific aromatic nuclei. The resultant copolymer so obtained is soluble in common organic solvents such as chloroform and toluene. Preliminary studies have indicated that the polymer shows orange photoluminescence and electroluminescence when a potential of 7–10 V is applied to the device.     

Structural and impedance studies on LaF3 thin films prepared by vacuum evaporation

Lanthanum fluoride thin film has been deposited on glass substrates by PVD method at various deposition temperatures (T_s), viz, 300, 473, 573 and 673 K. The hexagonal phase LaF₃ film has been detected by using glancing angle XRD analysis. The structural parameters such as lattice constants, grain size and micro-strain has been calculated from the XRD data. The F⁻ ion conduction through the grain and grain boundary has been analyzed using impedance analysis. The modulus spectra reveals the non-Debye nature and the distribution of relaxation times of the film.     

Characterization of drawn and undrawn poly-L-lactide films by differential scanning calorimetry

Poly-L-lactic acid (PLLA) is an optically active, biocompatible and biodegradable polymer that has been widely investigated as an artificial cell scaffold material. In its most crystalline form, PLLA is highly anisotropic and is one of the most piezoelectric polymers known. Conversely, amorphous PLLA exhibits little, if any, piezoelectric behavior. Compression molded PLLA films can be endowed with varying amounts of crystalline character and piezoelectricity by uniaxially stretching the polymer in a hot air bath. Understanding the precise crystalline architecture of PLLA that results from tensile drawing is important for constructing cell scaffolds that have highly tailored biodegradation and cell guiding properties. In our work here, we investigate the changes in the thermal properties of PLLA at draw ratios between 1.0 and 5.5 using differential scanning calorimetry (DSC). The crystallinity of the compression molded undrawn starting material is characterized using X-ray diffraction. Our DSC results show an increase in percent crystallinity with increasing draw up to a draw ratio of 4.0. At greater draw ratios, there is a decrease in the crystalline character exhibited by PLLA.This revised version was published online in November 2005 with corrections to the Cover Date.     

Formation of secondary fullerene ozonides in the ozonolysis of C60 solutions and chemiluminescence upon their hydrolysis

The formation of secondary fullerene ozonides (SFOs) in the ozonolysis of C₆₀ solutions in CCl₄ has reliably been determined for the first time; SFOs are accumulated during the whole ozonolysis time as a suspension in CCl₄. Hydrolysis of the SFOs results in chemiluminescence (CL) (I _max = 2.65·10⁸ photon s⁻¹ mL⁻¹), whose spectra contain maxima at 558, 608, and 685 nm. The most probable CL emitters are excited fullerene polyketones. Hydrogen peroxide was identified as a stable hydrolysis product of the SFOs by the color reaction with diphenylcarbazide and CL arisen upon the addition of an aqueous solution of FeSO₄·9H₂O to the hydrolyzate of the SFO. Chemiluminescence upon hydrolysis is a selective test for SFOs and allows one to find them in a complex mixture of the ozonolysis products of C₆₀. The rate constant and activation energy of SFO hydrolysis were determined from the kinetic measurements of CL. For SFO hydrolysis several probable reactions were proposed, including the formation of the CL emitters, and their heat effects were estimated using the PM3/RHF and AM1/RHF semiempirical methods for one-and two-cage model structures of SFOs. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1322–1329, August, 2006.     

Analysis of ALD-processed thin films by ion-beam techniques

This review introduces the possibilities of ion-beam techniques for the analysis of thin films and thin-film structures processed by atomic layer deposition (ALD). The characteristic features of ALD are also presented. The analytical techniques discussed include RBS, NRA and ERDA with its variants, viz. the TOF-ERDA and HI-ERDA. The thin film examples are taken from flat-panel display technology (TFEL structures) and the semiconductor industry (high-k insulators).Dedicated to the memory of Wilhelm Fresenius     

Electrochemical preparation of poly(<Emphasis Type="Italic">p</Emphasis>-phenylene) thin films

We report the electrochemical preparation of poly(p-phenylene) (PPP) thin films with a polymerization degree of approximately 20 using biphenyl as starting material. The PPP films are prepared directly on a tin oxide electrode, presenting a positive charge carrier mobility of 5×10⁻⁷ cm² V⁻¹ s⁻¹.     

Formation of the fullerene radical anion in the reaction of C60 with phosphorous triamides

Fullerene C₆₀ reacts with phosphorous acid triamides to give the radical anion. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 1, pp. 201–203, January, 2008.     

Paramagnetic metal chelates of an o-quinone derivative of fullerene with Mn and Re carbonyls

Reactions of the ^·M(CO)₅ radicals (M = Mn and Re) with an o-quinone derivative of fullerene C₆₀ yield stable paramagnetic complexes (ESR data). Two carbonyl ligands in the resulting spin adducts were replaced by PPh₃.     

Formation and study of thin films oftert-butyl-substituted thiopyrylium dyes

The formation of thin films of symmetrical and asymmetrical thiopyrylium dyes, containingtert-butyl substituents, on glass supports was studied. The films were deposited by centrifugation of solutions of individual dyes or dye—polymer [poly(methyl methacrylate)] compositions. The dye: polymer ratios necessary for the formation of WORM recording layers based on these dyes were determined. The use of a polymeric matrix increases the film thickness and optical density but decreases its reflection power and does not allow crystallization of the dye on the support to be completely avoided. An increase in the number oftert-butyl groups in the dye molecule prevents crystallization of the recording layer in the case of symmetrical dye molecules, but does not prevent it for asymmetrical molecules. The data obtained were interpreted in terms of geometrical views on the interaction of dye molecules in thin layers. Translated fromIzestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 1343–1349, July, 1998.     

Complex Formation of Cyclodextrins with Various Thiophenes and their Polymerization in Water: Preparation of Poly-pseudo-rotaxanes containing Poly(thiophene)s

Cyclodextrins (α-CD, β-CD and 2,6-di-O-dimethyl-β-CD (DM-β-CD)) were found to form inclusion compounds with thiophenes (thiophene (T), bithiophene (2T)) in water and in crystalline states. The structures of α-CD–T, β-CD–2T, and DM-β-CD–2T inclusion complexes were determined by X-ray crystallography. DM-β-CD forms a 1:1 cage type complex with 2T. In contrast, β-CD formed 2:3 (CD:guest) complexes with thiophene and α-CD formed 2:3 complexes, both of the channel type. These inclusion complexes were found to polymerize by FeCl₃ in the inclusion compounds in water. The products were formed poly-pseudo-rotaxane between cyclodextrins and poly(thiophene) characterized by IR, ¹H-NMR and ¹³C CP/MAS NMR. The molecular weights of the poly-pseudo-rotaxanes with poly(thiophene) were determined by the MALDI-TOF mass spectra to be 3000–5000. In comparison between poly-pseudo-rotaxane (DM-β-CD–poly(thiophene)), authentic poly(thiophene) and the washed DM-β-CD–poly(thiophene) which was washed with DMF to dethread DM-β-CD, these poly-pseudo-rotaxane was characterized by Raman, UV–vis and fluorescence spectra. The maximum emission band of DM-β-CD–poly(thiophene) shifted to a shorter wavelength. The hypsochromic shift was derived from poly-pseudo-rotaxane with DM-β-CD.     

Reaction of fullerene C60 with 2-azido-4,6-diphenylpyrimidine

The first representative of the pyrimidine-substituted [60]fullereno[1,2-b]aziridines was synthesized by the reaction of fullerene C₆₀ with 2-azido-4,6-diphenylpyrimidine. 2-(Azahomo[60]fullereno)-4,6-diphenylpyrimidine was found to be formed as a by-product. The electrochemical properties of the adducts were studied.     

Products of reaction of fullerene C60 with fuming sulfuric acid studied by IR and ESR spectroscopy

The products of reaction of fullerene C₆₀ with fuming sulfuric acid were precipitated from a solution with water and triethylamine and studied by IR and ESR spectroscopies. A comparison of the obtained data with the spectra of fullerene, dimers C₁₂₀ and C₁₂₀O, and fullerene polymers produced by photopolymerization allowed the conclusion that fullerene polymers were formed by fullerene oxidation with fuming sulfuric acid.     

Cathodic doping of thin-layered composites. Formed by electroactive polymers and rubbed single-walled carbon nanotubes

A simple method of electrostatic rubbing is developed for the application of single-walled carbon nanotubes (SWNT) to solid substrates. The method is applicable both to conducting materials (for example, glassy carbon) and insulators (for example, Teflon). The surface development of the obtained coatings is comparable to the bodies of multi-walled carbon nanotubes, which are grown on the TiN substrates. The possibility of cathodic doping of electron-conducting polybithiophene polymer and poly-o-phenylenediamine redox polymer on the substrates with SWNT is shown. The presence of nanotubes accelerates anodic synthesis of test polymers and improves the reversibility of their cathodic doping, the electrode surface development being the main factor.     

Reactions of [60]fullerene with 2-azidopyrimidines

The reaction of [60]fullerene with 2-azidopyrimidines affords fullerenoimidazopyrimidines, whose electron affinity is higher than that of nonmodified C₆₀.     

p-Phenylene sulfide oligomers and their properties. Ar-S couplings mediated by copper or by fluorine substitutions

A series of monodisperse p-phenylene sulfide oligomers were efficiently synthesized by using a bidirectional growth. A strategy combining Cu-catalyzed Ar-S couplings for small oligomers and fluorine aromatic substitutions by aryl thiolates for longer ones was put forward. The latter method is superior to Cu-catalyzed reactions for longer oligomers. Fluorine chemistry brings some new advantages such as solubility and reactivity. Qualitative crystallinity studies were reported according to the oligomer size and the functional series, by using a microscope equipped with a heating stage and a camera.     

Temperature dependence of the free energy of sorption ofn-alkanes and energy contribution of their methylene groups on columns with fullerene C60

The partial molar free energy, enthalpy, and entropy of sorption of C₁₁−C₂₃ n-alkanes were calculated on the basis of the GC data obtained on the glass capillary column coated with fullerene C₆₀ (Ful-60) as stationary phase. The thermodynamic parameters ofn-alkane sorption on a column with Ful-60 and a fused silica capillary column with polydimethylsiloxane OV-1 were determined and compared. The enthalpy-entropy compensation effect for the sorption ofn-alkanes on Ful-60 and OV-1 was found. A linear dependence of the partial molar free energy ofn-alkane sorption on the temperature of analysis and carbon chain length was found. The free energy contributions of the methylene groups were calculated, and their temperature dependences were studied. The differences in the temperature dependences of the energy contributions of methylene groups ofn-alkanes on Ful-60 and OV-1 were revealed. The entropy contribution is 68–82% of the enthalpy contribution which indicates a substantial role of the number of contacts with Ful-60 in retention ofn-alkanes. The ability of Ful-60 for dispersive interactions is similar to those of nonpolar liquid phases and substantially differs from that for carbon adsorbents. Fullerene columns were shown to be convenient for analysis of highly boiling organic substances in aqueous and organic solutions. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1490–1495, August, 1999.     

Selective reduction of fullerene C60 by metals in neutral and alkaline media. Interaction of C60 with KOH

The reduction of fullerene C₆₀ by Zn and Mg in DMF was studied both in the presence and absence of KOH. Fullerene C₆₀ was reduced in these systems to form the C₆₀ ^n– (n = 1, 2, and 3) anions. The anions were detected by optical and ESR spectroscopies. It was found that Mg reduced C₆₀ to the monoanion, Mg/KOH and Zn reduced C₆₀ to the dianion, and Zn/KOH reduced C₆₀ to the trianion. Like KCN, potassium hydroxide adds to fullerene upon interaction with C₆₀ in DMF. The reaction of C₆₀ with KOH in benzonitrile was accompanied by the generation of the fullerene monoanion. A possible mechanism of the formation of fullerene monoanions in the presence of KOH is discussed. The degradation of the C₆₀ ^n– anions in air was studied.