A Review on the Degradation of Pollutants by Fenton-Like Systems Based on Zero-Valent Iron and Persulfate: Effects of Reduction Potentials,pH, and Anions Occurring in Waste Waters

Among the advanced oxidation processes (AOPs), the Fenton reaction has attracted much attention in recent years for the treatment of water and wastewater. This review provides insight into a particular variant of the process, where soluble Fe(II) salts are replaced by zero-valent iron (ZVI), and hydrogen peroxide (H₂O₂) is replaced by persulfate (S₂O₈²⁻). Heterogeneous Fenton with ZVI has the advantage of minimizing a major problem found with homogeneous Fenton. Indeed, the precipitation of Fe(III) at pH > 4 interferes with the recycling of Fe species and inhibits oxidation in homogeneous Fenton; in contrast, suspended ZVI as iron source is less sensitive to the increase of pH. Moreover, persulfate favors the production of sulfate radicals (SO₄^•−) that are more selective towards pollutant degradation, compared to the hydroxyl radicals (^•OH) produced in classic, H₂O₂-based Fenton. Higher selectivity means that degradation of SO₄^•−-reactive contaminants is less affected by interfering agents typically found in wastewater; however, the ability of SO₄^•− to oxidize H₂O/OH⁻ to ^•OH makes it difficult to obtain conditions where SO₄^•− is the only reactive species. Research results have shown that ZVI-Fenton with persulfate works best at acidic pH, but it is often possible to get reasonable degradation at pH values that are not too far from neutrality. Moreover, inorganic ions that are very common in water and wastewater (Cl⁻, HCO₃⁻, CO₃²⁻, NO₃⁻, NO₂⁻) can sometimes inhibit degradation by scavenging SO₄^•− and/or ^•OH, but in other cases they even enhance the process. Therefore, ZVI-Fenton with persulfate might perform unexpectedly well in some saline waters, although the possible formation of harmful by-products upon oxidation of the anions cannot be ruled out.     

A Model Assessment of the Occurrence and Reactivity of the Nitrating/Nitrosating Agent Nitrogen Dioxide (•NO2) in Sunlit Natural Waters

Nitrogen dioxide (^•NO₂) is produced in sunlit natural surface waters by the direct photolysis of nitrate, together with ^•OH, and upon the oxidation of nitrite by ^•OH itself. ^•NO₂ is mainly scavenged by dissolved organic matter, and here, it is shown that ^•NO₂ levels in sunlit surface waters are enhanced by high concentrations of nitrate and nitrite, and depressed by high values of the dissolved organic carbon. The dimer of nitrogen dioxide (N₂O₄) is also formed in the pathway of ^•NO₂ hydrolysis, but with a very low concentration, i.e., several orders of magnitude below ^•NO₂, and even below ^•OH. Therefore, at most, N₂O₄ would only be involved in the transformation (nitration/nitrosation) of electron-poor compounds, which would not react with ^•NO₂. Although it is known that nitrite oxidation by CO₃^•− in high-alkalinity surface waters gives a minor-to-negligible contribution to ^•NO₂ formation, it is shown here that NO₂⁻ oxidation by Br₂^•− can be a significant source of ^•NO₂ in saline waters (saltwater, brackish waters, seawater, and brines), which offsets the scavenging of ^•OH by bromide. As an example, the anti-oxidant tripeptide glutathione undergoes nitrosation by ^•NO₂ preferentially in saltwater, thanks to the inhibition of the degradation of glutathione itself by ^•OH, which is scavenged by bromide in saltwater. The enhancement of ^•NO₂ reactions in saltwater could explain the literature findings, that several phenolic nitroderivatives are formed in shallow (i.e., thoroughly sunlit) and brackish lagoons in the Rhône river delta (S. France), and that the laboratory irradiation of phenol-spiked seawater yields nitrophenols in a significant amount.     

Biomimetic Ketone Reduction by Disulfide Radical Anion

The conversion of ribonucleosides to 2′-deoxyribonucleosides is catalyzed by ribonucleoside reductase enzymes in nature. One of the key steps in this complex radical mechanism is the reduction of the 3′-ketodeoxynucleotide by a pair of cysteine residues, providing the electrons via a disulfide radical anion (RSSR^•−) in the active site of the enzyme. In the present study, the bioinspired conversion of ketones to corresponding alcohols was achieved by the intermediacy of disulfide radical anion of cysteine (CysSSCys)^•− in water. High concentration of cysteine and pH 10.6 are necessary for high-yielding reactions. The photoinitiated radical chain reaction includes the one-electron reduction of carbonyl moiety by disulfide radical anion, protonation of the resulting ketyl radical anion by water, and H-atom abstraction from CysSH. The (CysSSCys)^•− transient species generated by ionizing radiation in aqueous solutions allowed the measurement of kinetic data with ketones by pulse radiolysis. By measuring the rate of the decay of (CysSSCys)^•− at λ_max = 420 nm at various concentrations of ketones, we found the rate constants of three cyclic ketones to be in the range of 10⁴–10⁵ M⁻¹s⁻¹ at ~22 °C.     

Antioxidant Activity Evaluation of FlexirubinType Pigment from Chryseobacterium artocarpi CECT 8497 and Related Docking Study

The current research is focused on studying the biological efficacy of flexirubin, a pigment extracted from Chryseobacterium artocarpi CECT 8497.Different methods such as DPPH, H₂O_2, NO^•, O₂^•−, ^•OH, lipid peroxidation inhibition by FTC and TBA, ferric reducing and ferrous chelating activity were carried out to evaluate the antioxidant activity of flexirubin. Molecular docking was also carried out, seeking the molecular interactions of flexirubin and a standard antioxidant compound with SOD enzyme to figure out the possible flexirubin activity mechanism. The new findings revealed that the highest level of flexirubin exhibited similar antioxidant activity as that of the standard compound according to the H₂O₂, ^•OH, O₂^•−, FTC and TBA methods. On the other hand, flexirubin at the highest level has shown lower antioxidant activity than the positive control according to the DPPH and NO• and even much lower when measured by the FRAP method. Molecular docking showed that the interaction of flexirubin was in the binding cavity of the SOD enzyme and did not affect its metal-binding site. These results revealed that flexirubin has antioxidant properties and can be a useful therapeutic compound in preventing or treating free radical-related diseases.     

Vibrationally Resolved Absorption and Fluorescence Spectra of Firefly Luciferin: A Theoretical Simulation in the Gas Phase and in Solution

Firefly bioluminescence has been applied in several fields. However, the absorption and fluorescence spectra of the substrate, luciferin, have not been observed at the vibrational level. In this study, the vibrationally resolved absorption and fluorescence spectra of firefly luciferin (neutral form LH₂, phenolate ion form LH^? and dianion form L^2?) are simulated using the density functional method and convoluted by a Gaussian function, with displacement, distortion and Duschinsky effects in the framework of the Franck–Condon approximation. Both neutral and anionic forms of the luciferin are considered in the gas phase and in solution. The simulated spectra have desired band maxima with the experimental ones. The vibronic structure analysis reveals that the features of the most contributive vibrational modes coincide with the key geometry‐changing region during transition between the ground state and the first singlet excited state.     

Understanding the complete bioluminescence cycle from a multiscale computational perspective: A review

Bioluminescence (BL) is an amazing natural phenomenon whose visible light is produced by living organisms. BL phenomenon is quite pervasive and has been observed in 17 phyla of 4 kingdoms. This fascinating natural phenomenon has unceasingly attracted people’s curiosity from ancient era to today. For a very long time, we can only receive some sporadic and static information from experimental observations, the mechanism of most BL remains is unclear. How the chemical reaction of BL process is initiated? Where the energy for light emission comes from? How does the light emitter produce? What is the light emitter for a wild bioluminescent organism? How to regain luciferin for next bioluminescence when it is used up? The luciferin is utilized forthwith or stored and release for subsequent light emission? What factors affect the color and strength of a bioluminescence? How to artificially tune the bioluminescence for special application? Computational BL plays unreplaceable role in answering these mechanistic questions. In contrast with experimental BL, computational BL came very late. In the past two decades, computational BL has touched nearly all the bioluminescent systems with chemical bases via the method of multiscale simulation. In this review, the author firstly introduced the history, types and general chemical process of BL. Then, the computational scheme on BL was briefly epitomized. Using firefly BL as a paradigmatic case, the author summarized theoretical investigation on the six stages of general chemical process in a BL cycle: luciferin oxidation, peroxide thermolysis, light emission, luciferin regeneration, luciferin storage and luciferin release. At each stage, the available theoretical studies of other bioluminescent organisms are briefly introduced and compared with the firefly system. Basing on the mechanistic understanding, the author reviewed the up-to-date theoretical design on bioluminescent systems. Again, the firefly was mainly focused on, and the other possible systems were just briefly introduced. This review summarized the theoretical studies to date on BL and addressed the status, critical challenges and future prospects of computational BL.     

Calcium Sulfite Solids Activated by Iron for Enhancing As(III) Oxidation in Water

Desulfurized gypsum (DG) as a soil modifier imparts it with bulk solid sulfite. The Fe(III)–sulfite process in the liquid phase has shown great potential for the rapid removal of As(III), but the performance and mechanism of this process using DG as a sulfite source in aqueous solution remains unclear. In this work, employing solid CaSO₃ as a source of SO₃²⁻, we have studied the effects of different conditions (e.g., pH, Fe dosage, sulfite dosage) on As(III) oxidation in the Fe(III)–CaSO₃ system. The results show that 72.1% of As(III) was removed from solution by centrifugal treatment for 60 min at near-neutral pH. Quenching experiments have indicated that oxidation efficiencies of As(III) are due at 67.5% to HO^•, 17.5% to SO₅^•− and 15% to SO₄^•−. This finding may have promising implications in developing a new cost-effective technology for the treatment of arsenic-containing water using DG.     

Anti-Inflammatory CeO2 Nanoparticles Prevented Cytotoxicity Due to Exogenous Nitric Oxide Donors via Induction Rather Than Inhibition of Superoxide/Nitric Oxide in HUVE Cells

The mechanism behind the cytoprotective potential of cerium oxide nanoparticles (CeO₂ NPs) against cytotoxic nitric oxide (NO) donors and H₂O₂ is still not clear. Synthesized and characterized CeO₂ NPs significantly ameliorated the lipopolysaccharide (LPS)-induced cytokines IL-1β and TNF-α. The main goal of this study was to determine the capacities of NPs regarding signaling effects that could have occurred due to reactive oxygen species (ROS) and/or NO, since NP-induced ROS/NO did not lead to toxicity in HUVE cells. Concentrations that induced 50% cell death (i.e., IC50s) of two NO donors (DETA-NO; 1250 ± 110 µM and sodium nitroprusside (SNP); 950 ± 89 µM) along with the IC50 of H₂O₂ (120 ± 7 µM) were utilized to evaluate cytoprotective potential and its underlying mechanism. We determined total ROS (as a collective marker of hydrogen peroxide, superoxide radical (O₂^•−), hydroxyl radical, etc.) by DCFH-DA and used a O₂^•− specific probe DHE to decipher prominent ROS. The findings revealed that signaling effects mediated mainly by O₂^•− and/or NO are responsible for the amelioration of toxicity by CeO₂ NPs at 100 µg/mL. The unaltered effect on mitochondrial membrane potential (MMP) due to NP exposure and, again, CeO₂ NPs-mediated recovery in the loss of MMP due to exogenous NO donors and H₂O₂ suggested that NP-mediated O₂^•− production might be extra-mitochondrial. Data on activated glutathione reductase (GR) and unaffected glutathione peroxidase (GPx) activities partially explain the mechanism behind the NP-induced gain in GSH and persistent cytoplasmic ROS. The promoted antioxidant capacity due to non-cytotoxic ROS and/or NO production, rather than inhibition, by CeO₂ NP treatment may allow cells to develop the capacity to tolerate exogenously induced toxicity.     

Supramolecular Association between γ-Cyclodextrin and Preyssler-Type Polyoxotungstate

The development of hybrid materials based on polyoxometalates constitutes a strategy for the design of multifunctional materials. The slow evaporation of an aqueous solution of [NaP₅W₃₀O₁₁₀]¹⁴⁻ in the presence of γ-Cyclodextrin (γ-CD) led to the crystallization of a K₆Na₈{[NaP₅W₃₀O₁₁₀]•(C₄₈H₈₀O₄₀)}•23H₂O (NaP₅W₃₀•1CD) supramolecular compound, which was characterized by single-crystal X-ray diffraction, IR-spectroscopy, thermogravimetric and elemental analyses. Structural analysis revealed the formation of 1:1 {[NaP₅W₃₀O₁₁₀]•[γ-CD]}¹⁴⁻ adduct in the solid state. Studies in solution by cyclic voltammetry, electrochemical impedance spectroscopy, ¹H NMR spectroscopy, and ³¹P DOSY, have demonstrated weak interactions between the inorganic anion and the macrocyclic organic molecule.     

Protonation of 18-crown-6 by dichloropicric acid in anhydrous and in water saturated 1,2-dichloroethane. Homoconjugation of dichloropicric acid

From conductometric and UV-VIS spectrophotometric studies of the reaction between 18-crown-6 (L) and dichloropicric acid (HA) in dry and water saturated 1,2-dichloroethane, it has been concluded that formation of a 1:1 homoconjugate HA ₂ ^– accompanies the simple protonation of L, viz, L+HALH⁺A^– and L+2HALH⁺HA ₂ ^– . The electrolytes LH⁺A^– and LH⁺HA ₂ ^– are extensively, or practically completely dissociated in both solvents under the experimental conditions. The specie LH⁺A^– appears to be a contact ion pair in DCE. The stability constant of HA ₂ ^– in the dry solvent, 5.7×10³ mol^–1-cm³, is some 10^2.4 times that in propylene carbonate reflecting the difference in H-bond accepting capacity of the two solvents. Hydration of HA, A^– and HA ₂ ^– in wet dichloroethane is negligible or slight. As expected, LH⁺ is rather strongly hydrated, the ratio of the hydration constants of LH⁺ and L being about 1×10¹.     

TDDFT Study of the Electronic Structure,Absorption and Emission Spectra of the Light Emitters of the Amazing Firefly Bioluminescence and Solvation Effects on the Spectra

The ground and excited state properties of luciferin (LH₂) and oxyluciferin (OxyLH₂), the bioluminescent chemicals in the firefly, have been characterized using density functional theory (DFT) and time dependent DFT (TDDFT) methods. The effects of solvation on the electronic absorption and emission spectra of luciferin and oxyluciferin were predicted with a self‐consistent isodensity polarized continuum model of the solvent using TDDFT. The S₀→S₁ vertical excitation energies in the gas phase and in water were obtained. Optimizations of the excited state geometries permitted the first predictions of the fluorescence spectra for these biologically important molecules. Shifts in both of the absorption and emission spectra on proceeding from the gas phase to aqueous solution were also predicted.     

An Optimized Firefly Luciferase Bioluminescent Assay for the Analysis of Free Fatty Acids

A firefly luciferase (LUC)‐based bioluminescent assay for total free fatty acids (FFA) is presented. It is based on LUC's capability of converting FFA into fatty acyl‐adenylates with consumption of adenosine 5′‐triphosphate (ATP). Since ATP is a cosubstrate in LUC's bioluminescent reaction, together with firefly d ‐luciferin (d ‐LH₂) and atmospheric oxygen (O₂), any reduction in the assay's ATP content will lead to a decrease in the bioluminescent signal, which is proportional to the amount of FFA. Using FFA mixtures containing myristic (14:0), palmitic (16:0), stearic (18:0), oleic (18:1) and arachidonic acid (20:4) in ethanol, the assay was optimized through statistical experimental design methodology, namely fractional factorial (screening) and central composite (optimization) designs. The optimized method requires 2 μL of sample per tube in a final reaction volume of 50 μL. It is linear in the concentration range from 1 to 20 μm , with limits of detection (LOD) and quantitation (LOQ) of 1.3 and 4.5 μm , respectively. The method proved to be simple to perform, demands low reagent volumes, it is sensitive and robust and may be adapted to high‐throughput screening.     

Dioxygen Reactivity of Copper(I)/Manganese(II)-Porphyrin Assemblies: Mechanistic Studies and Cooperative Activation of O2

The oxidation of transition metals such as manganese and copper by dioxygen (O₂) is of great interest to chemists and biochemists for fundamental and practical reasons. In this report, the O₂ reactivities of 1:1 and 1:2 mixtures of [(TPP)Mn^II] (1; TPP: Tetraphenylporphyrin) and [(tmpa)Cu^I(MeCN)]⁺ (2; TMPA: Tris(2-pyridylmethyl)amine) in 2-methyltetrahydrofuran (MeTHF) are described. Variable-temperature (−110 °C to room temperature) absorption spectroscopic measurements support that, at low temperature, oxygenation of the (TPP)Mn/Cu mixtures leads to rapid formation of a cupric superoxo intermediate, [(tmpa)Cu^II(O₂^•–)]⁺ (3), independent of the presence of the manganese porphyrin complex (1). Complex 3 subsequently reacts with 1 to form a heterobinuclear μ-peroxo species, [(tmpa)Cu^II–(O₂^2–)–Mn^III(TPP)]⁺ (4; λ_max = 443 nm), which thermally converts to a μ-oxo complex, [(tmpa)Cu^II–O–Mn^III(TPP)]⁺ (5; λ_max = 434 and 466 nm), confirmed by electrospray ionization mass spectrometry and nuclear magnetic resonance spectroscopy. In the 1:2 (TPP)Mn/Cu mixture, 4 is subsequently attacked by a second equivalent of 3, giving a bis-μ-peroxo species, i.e., [(tmpa)Cu^II−(O₂²⁻)−Mn^IV(TPP)−(O₂²⁻)−Cu^II(tmpa)]²⁺ (7; λ_max = 420 nm and δ_pyrrolic = −44.90 ppm). The final decomposition product of the (TPP)Mn/Cu/O₂ chemistry in MeTHF is [(TPP)Mn^III(MeTHF)₂]⁺ (6), whose X-ray structure is also presented and compared to literature analogs.     

Novel Boronate Probe Based on 3-Benzothiazol-2-yl-7-hydroxy-chromen-2-one for the Detection of Peroxynitrite and Hypochlorite

Derivatives of coumarin, containing oxidant-sensitive boronate group, were recently developed for fluorescent detection of inflammatory oxidants. Here, we report the synthesis and the characterization of 3-(2-benzothiazolyl)-7-coumarin boronic acid pinacol ester (BC-BE) as a fluorescent probe for the detection of peroxynitrite (ONOO^–), with high stability and a fast response time. The BC-BE probe hydrolyzes in phosphate buffer to 3-(2-benzothiazolyl)-7-coumarin boronic acid (BC-BA) which is stable in the solution even after a prolonged incubation time (24 h). BC-BA is slowly oxidized by H₂O₂ to form the phenolic product, 3-benzothiazol-2-yl-7-hydroxy-chromen-2-one (BC-OH). On the other hand, the BC-BA probe reacts rapidly with ONOO⁻. The ability of the BC-BA probe to detect ONOO^– was measured using both authentic ONOO^– and the system co-generating steady-state fluxes of O₂^•– and ^•NO. BC-BA is oxidized by ONOO^– to BC-OH. However, in this reaction 3-benzothiazol-2-yl-chromen-2-one (BC-H) is formed in the minor pathway, as a peroxynitrite-specific product. BC-OH is also formed in the reaction of BC-BA with HOCl, and subsequent reaction of BC-OH with HOCl leads to the formation of a chlorinated phenolic product, which could be used as a specific product for HOCl. We conclude that BC-BA shows potential as an improved fluorescent probe for the detection of peroxynitrite and hypochlorite in biological settings. Complementation of the fluorescence measurements by HPLC-based identification of oxidant-specific products will help to identify the oxidants detected.     

Single-Step Hydrolysis and Derivatization of Homocysteine Thiolactone Using Zone Fluidics: Simultaneous Analysis of Mixtures with Homocysteine Following Separation by Fluorosurfactant-Modified Gold Nanoparticles

Herein, we report a new automated flow method based on zone fluidics for the simultaneous determination of homocysteine and homocysteine thiolactone using fluorimetric detection (λ_ext = 370 nm/λ_em = 480 nm). Homocysteine thiolactone is hydrolyzed on-line in alkaline medium (1 mol L⁻¹ NaOH) to yield homocysteine, followed by reaction with o-phthalaldehyde in a single step. Derivatization is rapid without the need of elevated temperatures and stopped-flow steps, while specificity is achieved through a unique reaction mechanism in the absence of nucleophilic compounds. Mixtures of the analytes can be analyzed quantitatively after specific separation with fluorosurfactant-capped gold nanoparticles that are selectively aggregated by homocysteine, leaving the thiolactone analogue in solution. As low as 100 nmol L⁻¹ of the analyte(s) can be quantified in aqueous solutions, while concentrations > 2 μmol L⁻¹ can be analyzed in artificial and real urine matrix following 20-fold dilution. The percent recoveries ranged between 87 and 119%.     

Salt Stress Mitigation via the Foliar Application of Chitosan-Functionalized Selenium and Anatase Titanium Dioxide Nanoparticles in Stevia (Stevia rebaudiana Bertoni)

High salt levels are one of the significant and major limiting factors on crop yield and productivity. Out of the available attempts made against high salt levels, engineered nanoparticles (NPs) have been widely employed and considered as effective strategies in this regard. Of these NPs, titanium dioxide nanoparticles (TiO₂ NPs) and selenium functionalized using chitosan nanoparticles (Cs–Se NPs) were applied for a quite number of plants, but their potential roles for alleviating the adverse effects of salinity on stevia remains unclear. Stevia (Stevia rebaudiana Bertoni) is one of the reputed medicinal plants due to their diterpenoid steviol glycosides (stevioside and rebaudioside A). For this reason, the current study was designed to investigate the potential of TiO₂ NPs (0, 100 and 200 mg L⁻¹) and Cs–Se NPs (0, 10 and 20 mg L⁻¹) to alleviate salt stress (0, 50 and 100 mM NaCl) in stevia. The findings of the study revealed that salinity decreased the growth and photosynthetic traits but resulted in substantial cell damage through increasing H₂O₂ and MDA content, as well as electrolyte leakage (EL). However, the application of TiO₂ NPs (100 mg L⁻¹) and Cs–Se NPs (20 mg L⁻¹) increased the growth, photosynthetic performance and activity of antioxidant enzymes, and decreased the contents of H₂O₂, MDA and EL under the saline conditions. In addition to the enhanced growth and physiological performance of the plant, the essential oil content was also increased with the treatments of TiO₂ (100 mg L⁻¹) and Cs–Se NPs (20 mg L⁻¹). In addition, the tested NPs treatments increased the concentration of stevioside (in the non-saline condition and under salinity stress) and rebaudioside A (under the salinity conditions) in stevia plants. Overall, the current findings suggest that especially 100 mg L⁻¹ TiO₂ NPs and 20 mg L⁻¹ Cs–Se could be considered as promising agents in combating high levels of salinity in the case of stevia.     

Combining Coagulation and Electrocoagulation with UVA-LED Photo-Fenton to Improve the Efficiency and Reduce the Cost of Mature Landfill Leachate Treatment

This study focused on the reduction of the treatment cost of mature landfill leachate (LL) by enhancing the coagulation pre-treatment before a UVA-LED photo-Fenton process. A more efficient advanced coagulation pretreatment was designed by combining conventional coagulation (CC) and electro-coagulation (EC). Regardless of the order in which the two coagulations were applied, the combination achieved more than 73% color removal, 80% COD removal, and 27% SUVA removal. However, the coagulation order had a great influence on both final pH and total dissolved iron, which were key parameters for the UVA-LED photo-Fenton post-treatment. CC (pH = 5; 2 g L⁻¹ of FeCl₃6H₂O) followed by EC (pH = 5; 10 mA cm⁻²) resulted in a pH of 6.4 and 100 mg L⁻¹ of dissolved iron, whereas EC (pH = 4; 10 mA cm⁻²) followed by CC (pH = 6; 1 g L⁻¹ FeCl₃6H₂O) led to a final pH of 3.4 and 210 mg L⁻¹ dissolved iron. This last combination was therefore considered better for the posterior photo-Fenton treatment. Results at the best cost-efficient [H₂O₂]:COD ratio of 1.063 showed a high treatment efficiency, namely the removal of 99% of the color, 89% of the COD, and 60% of the SUVA. Conductivity was reduced by 17%, and biodegradability increased to BOD₅:COD = 0.40. With this proposed treatment, a final COD of only 453 mg O₂ L⁻¹ was obtained at a treatment cost of EUR 3.42 kg COD⁻¹.     

Antioxidant and Starch-Hydrolyzing Enzymes Inhibitory Properties of Striga-Resistant Yellow-Orange Maize Hybrids

Most of the health benefits derived from cereals are attributed to their bioactive compounds. This study evaluated the levels of the bioactive compounds, and the antioxidant and starch-hydrolyzing enzymes inhibitory properties of six pipeline Striga-resistant yellow-orange maize hybrids (coded AS1828-1, 4, 6, 8, 9, 11) in vitro. The maize hybrids were grown at the International Institute of Tropical Agriculture (IITA), Nigeria. The bioactive compounds (total phenolics, tannins, flavonoids, and phytate) levels, antioxidant (DPPH^• and ABTS^•+ scavenging capacity and reducing power) and starch-hydrolyzing enzymes (α-amylase and α-glucosidase) inhibitory activities of the maize hybrids were determined by spectrophotometry. At the same time, carotenoids were quantified using a reverse-phase HPLC system. The ranges of the bioactive compounds were: 11.25–14.14 mg GAE/g (total phenolics), 3.62–4.67 mg QE/g (total flavonoids), 3.63–6.29 mg/g (tannins), 3.66–4.31% (phytate), 8.92–12.11 µg/g (total xanthophylls), 2.42–2.89 µg/g (total β-carotene), and 3.17–3.77 µg/g (total provitamin A carotenoids). Extracts of the maize hybrids scavenged DPPH^• (SC₅₀: 9.07–26.35 mg/mL) and ABTS^•+ (2.65–7.68 TEAC mmol/g), reduced Fe³⁺ to Fe²⁺ (0.25 ± 0.64–0.43 ± 0.01 mg GAE/g), and inhibited α-amylase and α-glucosidase, with IC₅₀ ranges of 26.28–52.55 mg/mL and 47.72–63.98 mg/mL, respectively. Among the six clones of the maize hybrids, AS1828-9 had the highest (p < 0.05) levels of tannins and phytate and the strongest antioxidant and starch-hydrolyzing enzymes inhibitory activities. Significant correlations were observed between total phenolics and the following: ABTS^•+ (p < 0.01, r = 0.757), DPPH^• SC₅₀ (p < 0.01, r = −0.867), reducing power (p < 0.05, r = 0.633), α-amylase IC₅₀ (p < 0.01, r = −0.836) and α-glucosidase IC₅₀ (p < 0.05, r = −0.582). Hence, the Striga-resistant yellow-orange maize hybrids (especially AS1828-9) may be beneficial for alleviating oxidative stress and postprandial hyperglycemia.     

Phenolic compounds,essential oil composition,and antioxidant activity of Angelica purpurascens (Avé-Lall.) Gill

In this study, methanol extracts (MEs) and essential oil (EO) of Angelica purpurascens (Avé-Lall.) Gill obtained from different parts (root, stem, leaf, and seed) were evaluated in terms of antioxidant activity, total phenolics, compositions of phenolic compound, and essential oil with the methods of 2,2-azino-bis(3ethylbenzo-thiazoline-6-sulfonic acid (ABTS•⁺), 2,2-diphenyl-1-picrylhydrazil (DPPH•) radical scavenging activities, and ferric reducing/antioxidant power (FRAP), the Folin–Ciocalteu, liquid chromatography−tandem mass spectrometry (LC−MS/MS), and gas chromatography-mass spectrometry (GC−MS), respectively. The root extract of A. purpurascens exhibited the highest ABTS•⁺, DPPH•, and FRAP activities (IC₅₀: 0.05 ± 0.0001 mg/mL, IC₅₀: 0.06 ± 0.002 mg/mL, 821.04 ± 15.96 µM TEAC (Trolox equivalent antioxidant capacity), respectively). Moreover, EO of A. purpurascens root displayed DPPH• scavenging activity (IC₅₀: 2.95 ± 0.084 mg/mL). The root extract had the highest total phenolic content (438.75 ± 16.39 GAE (gallic acid equivalent), µg/mL)). Twenty compounds were identified by LC−MS/MS. The most abundant phenolics were ferulic acid (244.39 ± 15.64 μg/g extract), benzoic acid (138.18 ± 8.84 μg/g extract), oleuropein (78.04 ± 4.99 μg/g extract), and rutin (31.21 ± 2.00 μg/g extract) in seed, stem, root, and leaf extracts, respectively. According to the GC−MS analysis, the major components were determined as α-bisabolol (22.93%), cubebol (14.39%), α-pinene (11.63%), and α-limonene (9.41%) among 29 compounds. Consequently, the MEs and EO of A. purpurascens can be used as a natural antioxidant source.     

Exploiting host–guest chemistry to manipulate magnetic interactions in metallosupramolecular M4L6 tetrahedral cages

Reaction of Ni(OTf)₂ with the bisbidentate quaterpyridine ligand L results in the self-assembly of a tetrahedral, paramagnetic cage [Ni^II₄L₆]⁸⁺. By selectively exchanging the bound triflate from [OTf⊂Ni^II₄L₆](OTf)₇ (1), we have been able to prepare a series of host–guest complexes that feature an encapsulated paramagnetic tetrahalometallate ion inside this paramagnetic host giving [M^IIX₄⊂Ni^II₄L₆](OTf)₆, where M^IIX₄²⁻ = MnCl₄²⁻ (2), CoCl₄²⁻ (5), CoBr₄²⁻ (6), NiCl₄²⁻ (7), and CuBr₄²⁻ (8) or [M^IIIX₄⊂Ni^II₄L₆](OTf)₇, where M^IIIX₄⁻ = FeCl₄⁻ (3) and FeBr₄⁻ (4). Triflate-to-tetrahalometallate exchange occurs in solution and can also be accomplished through single-crystal-to-single-crystal transformations. Host–guest complexes 1–8 all crystallise as homochiral racemates in monoclinic space groups, wherein the four {NiN₆} vertexes within a single Ni₄L₆ unit possess the same Δ or Λ stereochemistry. Magnetic susceptibility and magnetisation data show that the magnetic exchange between metal ions in the host [Ni^II₄] complex, and between the host and the MX₄ⁿ⁻ guest, are of comparable magnitude and antiferromagnetic in nature. Theoretically derived values for the magnetic exchange are in close agreement with experiment, revealing that large spin densities on the electronegative X-atoms of particular MX₄ⁿ⁻ guest molecules lead to stronger host–guest magnetic exchange interactions.

The tetrahedral [Ni^II₄L₆]⁸⁺ cage can reversibly bind paramagnetic MX₄^1/2− guests, inducing magnetic exchange interactions between host and guest.