Smoked-Derived Volatile Phenol Analysis in Wine by Stir Bar Sorptive Extraction-Gas Chromatography-Mass Spectrometry

Smoke-derived taint has become a significant concern for the U.S. wine industry, particularly on the west coast, and climate change is anticipated to aggravate it. High volatile phenols such as guaiacol, 4-methylguaiacol, 4-ethylguaiacol, 4-ethylphenol, and o-, p-, m-cresols have been suggested to be related to smoke-exposed grape and wine. This paper describes an analytical approach based on ethylene glycol/polydimethylsiloxane (EG/PDMS)-stir bar sorptive extraction-gas chromatography-mass spectrometry (SBSE-GC-MS) to quantify or estimate the concentrations of some smoke-related volatile phenols in wines. Correlation coefficients with R² ≥ 0.990 were obtained. This method can quantify most smoked-related volatile phenols down to 0.5 μg/L in wine in selective ion monitoring mode. Recovery for the targeted volatile phenols ranged from 72.2% to 142.4% in the smoke-tainted wine matrix, except for 4-vinylguaiacol. The standard deviations of the volatile phenols were from 0 to 23% in smoke-tainted wine. The approach provides another tool to evaluate wine smoke exposure and potential smoke taint.     

Two Sides to One Story—Aroma Chemical and Sensory Signature of Lugana and Verdicchio Wines

Lugana and Verdicchio are two Italian white wines with a Protected Designation of Origin (PDO) label. These two wine types are produced in different regions using the same grape variety. The aim of this work is to investigate the existence of volatile chemical markers that could help to elucidate differences between Lugana and Verdicchio wines both at chemical and sensory levels. Thirteen commercial wine samples were analyzed by Gas Chromatography-Mass Spectrometry (GC-MS), and 76 volatile compounds were identified and quantified. Verdicchio and Lugana had been differentiated on the basis of 19 free and glycosidically bound compounds belonging to the chemical classes of terpenes, benzenoids, higher alcohols, C₆ alcohols and norisoprenoids. Samples were assessed by means of a sorting task sensory analysis, resulting in two clusters formed. These results suggested the existence of 2 product types with specific sensory spaces that can be related, to a good extend, to Verdicchio and Lugana wines. Cluster 1 was composed of six wines, 4 of which were Lugana, while Cluster 2 was formed of 7 wines, 5 of which were Verdicchio. The first cluster was described as “fruity”, and “fresh/minty”, while the second as “fermentative” and “spicy”. An attempt was made to relate analytical and sensory data, the results showed that damascenone and the sum of 3 of esters the ethyl hexanoate, ethyl octanoate and isoamyl acetate, was characterizing Cluster 1. These results highlighted the primary importance of geographical origin to the volatile composition and perceived aroma of Lugana and Verdicchio wines.     

Effect of Hanseniaspora uvarum–Saccharomyces cerevisiae Mixed Fermentation on Aroma Characteristics of Rosa roxburghii Tratt,Blueberry, and Plum Wines

Hanseniaspora uvarum, a non-Saccharomyces cerevisiae species, has a crucial effect on the aroma characteristics of fruit wines, thus, attracting significant research interest in recent years. In this study, H. uvarum–Saccharomyces cerevisiae mixed fermentation was used to ferment Rosa roxburghii Tratt, blueberry fruit wine, and plum fruit wines using either a co-inoculated or a sequentially inoculated approach. The three fruit wines’ volatile aroma characteristics were analyzed by headspace–solid-phase microextraction–gas chromatography-mass spectrometry (HS–SPME–GC–MS). The results showed that the mixed inoculation of H. uvarum and S. cerevisiae reduced the alcoholic content of Kongxinli fruit wine. Moreover, H. uvarum–S. cerevisiae fermented Rosa roxburghii Tratt, blueberry, and plum fruit wines and further enriched their flavor compounds. The overall flavor characteristics of sequentially inoculated fruit wines differed significantly from those fermented with S. cerevisiae alone, although several similarities were also observed. Sequential inoculation of H. uvarum and S. cerevisiae positively affected the mellowness of the wine and achieved a better harmony of the overall wine flavors. Therefore, H. uvarum–Saccharomyces cerevisiae mixed fermentation can improve the complexity of the wines’ aromatic composition and empower them with a unique identity. In particular, H. uvarum–Saccharomyces cerevisiae blueberry wine produced by mixed fermentation had the widest variety and content of aroma compounds among the fermented wines. Therefore, H. uvarum–Saccharomyces cerevisiae mixed-fermentation inoculation in the three fermented fruit wines significantly increased the aroma compound variety and content, thus, enriching their aroma richness and complexity. This study is the first comparative evaluation of the aroma characteristics of different fruit wines fermented with a mixed inoculation of H. uvarum and S. cerevisiae and provides a preliminary guide for these fruit wines produced with non-Saccharomyces yeast.     

Glycosidically-Bound Volatile Phenols Linked to Smoke Taint: Stability during Fermentation with Different Yeasts and in Finished Wine

When wine grapes are exposed to smoke, there is a risk that the resulting wines may possess smoky, ashy, or burnt aromas, a wine flaw known as smoke taint. Smoke taint occurs when the volatile phenols (VPs) largely responsible for the aroma of smoke are transformed in grape into a range of glycosides that are imperceptible by smell. The majority of VP-glycosides described to date are disaccharides possessing a reducing β-d-glucopyranosyl moiety. Here, a two-part experiment was performed to (1) assess the stability of 11 synthesized VP-glycosides towards general acid-catalyzed hydrolysis during aging, and (2) to examine whether yeast strains differed in their capacity to produce free VPs both from these model glycosides as well as from grapes that had been deliberately exposed to smoke. When fortified into both model and real wine matrices at 200 ng/g, all VP-disaccharides were stable over 12 weeks, while (42–50 ng/g) increases in free 4-ethylphenol and p-cresol were detected when these were added to wine as their monoglucosides. Guaiacol and phenol were the most abundantly produced VPs during fermentation, whether originating from natural VP-precursors in smoked-exposed Pinot Noir must, or due to fortification with synthetic VP-glycosides. Significant yeast strain-specific differences in glycolytic activities were observed for phenyl-β-d-glycopyranoside, with two strains (RC212 and BM45) being unable to hydrolyze this model VP, albeit both were active on the guaiacyl analogue. Thus, differences in Saccharomyces cerevisiae β-glucosidase activity appear to be influenced by the VP moiety.     

Multi-Elemental Analysis of Wine Samples in Relation to Their Type,Origin, and Grape Variety

Wine is one of the most popular alcoholic beverages. Therefore, the control of the elemental composition is necessary throughout the entire production process from the grapes to the final product. The content of some elements in wine is very important from the organoleptic and nutritional points of view. Nowadays, wine studies have also been undertaken in order to perform wine categorization and/or to verify the authenticity of products. The main objective of this research was to evaluate the influence of the chosen factors (type of wine, producer, origin) on the levels of 28 elements in 180 wine samples. The concentration of studied elements was determined by ICP-MS (Ag, B, Ba, Be, Bi, Cd, Co, Cr, Cu, Li, Mn, Mo, Ni, Pb, Rb, Sb, Sn, Sr, Te, Tl, U, Zn), ICP-OES (Ca, Fe, K, Mg, Ti), and CVAAS (Hg) techniques in 79 red, 75 white, and 26 rose wine samples. In general, red wines contained higher values of mean and median of B, Ba, Cr, Cu, Mn, Sr and Zn in contrast to other wine types (white and rose). In white wines (when compared to red and rose wines) higher levels of elements such as Ag, Be, Bi, Cd, Co, Li, K and Ti were determined. In contrast, rose wines were characterized by a higher concentration of Fe and U. The study also revealed that in the case of 18 samples, the maximum levels of some metals (Cd—8 samples, Pb—9 samples, Cu—1 sample) were slightly exceeded according to the OIV standards, while for Zn and Ti in any wine sample the measured concentrations of these metals were above the permissible levels. Thus, it can be stated that the studied wines contained, in general, lower levels of heavy metals, suggesting that they should have no effect on the safety of consumption. The results also showed higher pH level for red wines as a consequence of the second fermentation process which is typically carried out for this type of wine (malolactic fermentation). The highest median value of pH was reported for Merlot-based wines, while the lowest was for Riesling. It is assumed that dry Riesling has a higher content of tartaric and malic acid than dry Chardonnay grown in the same climate. From all of the studied countries, wines from Poland seemed to present one of the most characteristic elemental fingerprints since for many elements relatively low levels were recorded. Moreover, this study revealed that also wine samples from USA and Australia can be potentially discriminated from the rest of studied wines. For USA the most characteristic metal for positive identification of the country of origin seems to be uranium, whereases for Australia – strontium and manganese. Based on the highly reduced set of samples, it was not possible to differentiate the studied wine products according to the grape variety other than Syrah, and partially Chardonnay. Since all the Syrah-based samples originated from the same country (Australia) thus, the observed grouping should be more related with the country of origin than the grape variety.     

Potential Mitigation of Smoke Taint in Wines by Post-Harvest Ozone Treatment of Grapes

When bushfires occur near grape growing regions, vineyards can be exposed to smoke, and depending on the timing and duration of grapevine smoke exposure, fruit can become tainted. Smoke-derived volatile compounds, including volatile phenols, can impart unpleasant smoky, ashy characters to wines made from smoke-affected grapes, leading to substantial revenue losses where wines are perceivably tainted. This study investigated the potential for post-harvest ozone treatment of smoke-affected grapes to mitigate the intensity of smoke taint in wine. Merlot grapevines were exposed to smoke at ~7 days post-veraison and at harvest grapes were treated with 1 or 3 ppm of gaseous ozone (for 24 or 12 h, respectively), prior to winemaking. The concentrations of smoke taint marker compounds (i.e., free and glycosylated volatile phenols) were measured in grapes and wines to determine to what extent ozonation could mitigate the effects of grapevine exposure to smoke. The 24 h 1 ppm ozone treatment not only gave significantly lower volatile phenol and volatile phenol glycoside concentrations but also diminished the sensory perception of smoke taint in wine. Post-harvest smoke and ozone treatment of grapes suggests that ozone works more effectively when smoke-derived volatile phenols are in their free (aglycone) form, rather than glycosylated forms. Nevertheless, the collective results demonstrate the efficacy of post-harvest ozone treatment as a strategy for mitigation of smoke taint in wine.     

Large-Scale Reassessment of In-Vineyard Smoke-Taint Grapevine Protection Strategies and the Development of Predictive Off-Vine Models

Smoke taint in wine is thought to be caused by smoke-derived volatile phenols (VPs) that are absorbed into grape tissues, trapped as conjugates that are imperceptible by smell, and subsequently released into wines as their free odor-active forms via metabolism by yeasts during fermentation. Blocking VP uptake into grapes would, therefore, be an effective way for vineyards to protect ripening grape crops exposed to smoke. Here, we re-evaluated a biofilm that had previously shown promise in pilot studies in reducing levels of smoke-derived VPs. A suite of nine free and acid-labile VPs were quantitated in Pinot Noir grapes that had been exposed to smoke after being coated with the biofilm one, seven or 14 days earlier. In contrast with earlier studies, our results demonstrated that in all cases, the biofilm treatments led to increased concentrations of both free and total VPs in smoke-exposed grapes, with earlier applications elevating concentrations of some VPs more than the later time points. Tracking VP concentrations through the grape ripening process demonstrated that some (phenol, p/m-cresol, and guaiacol) were not entirely sequestered in grapes as acid-labile conjugates, suggesting the presence of VP storage forms beyond simple glycosides. Free VPs in grapes, though a minor portion of the total, most clearly correlated with concentrations present in the resulting wines. Finally, red table grapes, available year round, were observed to replicate the effects of the biofilm treatments and were capable of transforming most VPs into acid-labile conjugates in under 24 h, indicating that they might be an effective model for rapidly assessing smoke-taint prophylactic products in the laboratory.     

Influence of Triazole Pesticides on Wine Flavor and Quality Based on Multidimensional Analysis Technology

Triazole pesticides are widely used to control grapevine diseases. In this study, we investigated the impact of three triazole pesticides—triadimefon, tebuconazole, and paclobutrazol—on the concentrations of wine aroma compounds. All three triazole pesticides significantly affected the ester and acid aroma components. Among them, paclobutrazol exhibited the greatest negative influence on the wine aroma quality through its effect on the ester and acid aroma substances, followed by tebuconazole and triadimefon. Qualitative and quantitative analysis by solid-phase micro-extraction gas chromatography coupled with mass spectrometry revealed that the triazole pesticides also changed the flower and fruit flavor component contents of the wines. This was attributed to changes in the yeast fermentation activity caused by the pesticide residues. The study reveals that triazole pesticides negatively impact on the volatile composition of wines with a potential undesirable effect on wine quality, underlining the desirability of stricter control by the food industry over pesticide residues in winemaking.     

Enantioselective Total Synthesis of (R,R)-Blumenol B and d9-(R,R)-Blumenol B

C₁₃-norisoprenoids are of particular importance to grapes and wines, as these molecules influence wine aroma and have been shown to significantly contribute to the distinct character of various wine varieties. Blumenol B is a putative precursor to a number of important wine aroma compounds, including the well-known compounds theaspirone and vitispirane. The enantioselective synthesis of (R,R)-blumenol B from commercially available 4-oxoisophorone was achieved using a short and easily scaleable route, which was then successfully applied to the synthesis of poly-deuterated d9-blumenol B.     

Correlating Sensory Assessment of Smoke-Tainted Wines with Inter-Laboratory Study Consensus Values for Volatile Phenols

Vineyard exposure to wildfire smoke can taint grapes and wine. To understand the impact of this taint, it is imperative that the analytical methods used are accurate and precise. This study compared the variance across nine commercial and research laboratories following quantitative analysis of the same set of smoke-tainted wines. In parallel, correlations between the interlaboratory consensus values for smoke-taint markers and sensory analyses of the same smoke-tainted wines were evaluated. For free guaiacol, the mean accuracy was 94 ± 11% in model wine, while the free cresols and 4-methylguaiacol showed a negative bias and/or decreased precision relative to guaiacol. Similar trends were observed in smoke-tainted wines, with the cresols and glycosidically bound markers demonstrating high variance. Collectively, the interlaboratory results show that data from a single laboratory can be used quantitatively to understand smoke-taint. Results from different laboratories, however, should not be directly compared due to the high variance between study participants. Correlations between consensus compositional data and sensory evaluations suggest the risk of perceivable smoke-taint can be predicted from free cresol concentrations, overcoming limitations associated with the occurrence of some volatile phenols, guaiacol in particular, as natural constituents of some grape cultivars and of the oak used for barrel maturation.     

Effects of Traditional and Modern Post-Harvest Withering Processes on the Composition of the Vitis v. Corvina Grape and the Sensory Profile of Amarone Wines

In the Valpolicella area (Verona, Italy) Vitis vinifera cv. Corvina is the main grape variety used to produce Amarone wine. Before starting the winemaking process, the Corvina grapes are stored in a withering (i.e., dehydrating) warehouse until about 30% of the berry weight is lost (WL). This practice is performed to concentrate the metabolites in the berry and enrich the Amarone wine in aroma and antioxidant compounds. In compliance with the guidelines and strict Amarone protocol set by the Consorzio of Amarone Valpolicella, withering must be carried out by setting the grapes in a suitable environment, either under controlled relative air humidity (RH) conditions and wind speed (WS)—no temperature modification is to be applied—or, following the traditional methods, in non-controlled environmental conditions. In general, the two processes have different dehydration kinetics due to the different conditions in terms of temperature, RH, and WS, which affect the accumulation of sugars and organic acids and the biosynthesis of secondary metabolites such as stilbenes and glycoside aroma precursors. For this study, the two grape-withering processes were carried out under controlled (C) and non-controlled (NC) conditions, and the final compositions of the Corvina dried grapes were compared also to evaluate the effects on the organoleptic characteristics of Amarone wine. The findings highlighted differences between the two processes mainly in terms of the secondary metabolites of the dried grapes, which affect the organoleptic characteristics of Amarone wine. Indeed, by the sensory evaluation, wines produced by adopting the NC process were found more harmonious, elegant, and balanced. Finally, we can state how using a traditional system, grapes were characterised by higher levels of VOCs (volatile compounds), whilst wines had a higher and appreciable complexity and finesse.     

DCMC as a Promising Alternative to Bentonite in White Wine Stabilization. Impact on Protein Stability and Wine Aromatic Fraction

Protein haze in white wine is one of the most common non-microbial defects of commercial wines, with bentonite being the main solution utilized by the winemaking industry to tackle this problem. Bentonite presents some serious disadvantages, and several alternatives have been proposed. Here, an alternative based on a new cellulose derivative (dicarboxymethyl cellulose, DCMC) is proposed. To determine the efficiency of DCMC as a bentonite alternative, three monovarietal wines were characterized, and their protein instability and content determined by a heat stability test (HST) and the Bradford method, respectively. The wines were treated with DCMC to achieve stable wines, as shown by the HST, and the efficacy of the treatments was assessed by determining, before and after treatment, the wine content in protein, phenolic compounds, sodium, calcium, and volatile organic compounds (VOCs) as well as the wine pH. DCMC applied at dosages such as those commonly employed for bentonite was able to reduce the protein content in all tested wines and to stabilize all but the Moscatel de Setúbal varietal wine. In general, DCMC was shown to induce lower changes in the wine pH and phenolic content than bentonite, reducing the wine calcium content. Regarding which VOCs are concerned, DCMC produced a general impact similar to that of bentonite, with differences depending on wine variety. The results obtained suggest that DCMC can be a sustainable alternative to bentonite in protein white wine stabilization.     

Techniques for Mitigating the Effects of Smoke Taint While Maintaining Quality in Wine Production: A Review

Smoke taint has become a prominent issue for the global wine industry as climate change continues to impact the length and extremity of fire seasons around the world. Although the issue has prompted a surge in research on the subject in recent years, no singular solution has yet been identified that is capable of maintaining the quality of wine made from smoke-affected grapes. In this review, we summarize the main research on smoke taint, the key discoveries, as well as the prevailing uncertainties. We also examine methods for mitigating smoke taint in the vineyard, in the winery, and post production. We assess the effectiveness of remediation methods (proposed and actual) based on available research. Our findings are in agreement with previous studies, suggesting that the most viable remedies for smoke taint are still the commercially available activated carbon fining and reverse osmosis treatments, but that the quality of the final treated wines is fundamentally dependent on the initial severity of the taint. In this review, suggestions for future studies are introduced for improving our understanding of methods that have thus far only been preliminarily investigated. We select regions that have already been subjected to severe wildfires, and therefore subjected to smoke taint (particularly Australia and California) as a case study to inform other wine-producing countries that will likely be impacted in the future and suggest specific data collection and policy implementation actions that should be taken, even in countries that have not yet been impacted by smoke taint. Ultimately, we streamline the available information on the topic of smoke taint, apply it to a global perspective that considers the various stakeholders involved, and provide a launching point for further research on the topic.     

Comparison of a Rapid Light-Induced and Forced Test to Study the Oxidative Stability of White Wines

The oxidation processes of white wines can occur during storage and commercialization due to several factors, and these can negatively affect the color, aroma, and quality of the wine. Wineries should have faster and simpler methods that provide valuable information on oxidation stability of wines and allow fast decision-making procedures, able to trigger suitable technological interventions. Using a portable prototype instrument for light irradiations at different wavelengths and times was considered and evaluated on sensorial, spectrophotometric, and colorimetric parameters of white wines. The sensorial analysis revealed that white and light blue were the most significant, after only 1 h of irradiation. The experimental results showed that hydrogen peroxide could enhance the effect of light treatment, allowing a contemporary evaluation of the oxidation stability of wine against light and chemical stresses. As expected, a good correlation (R² > 0.89) between optical density at 420 nm and b* parameter was highlighted. The synergic effect of light and H₂O₂ was also studied on the hydrolyzable and condensed tannins’ additions to white wine. The proposed methodology could be used to evaluate the oxidative stability of white wines, but also to evaluate the effect of some oenological adjuvants on wine stability.     

Analytical and Chemometric Characterization of Fino and Amontillado Sherries during Aging in Criaderas y Solera System

Fino and Amontillado are Sherry wines, produced in Marco de Jerez area (southern Spain), and aged in Criaderas y Solera system. Fino Sherry wine follows a biological aging process, under a veil of flor yeasts, while Amontillado Sherry wine shares the same biological aging firstly, followed by oxidative aging, which gives them special features. Organic acids, esters, higher alcohols, phenolic compounds and total dry extract of Sherries evolve during aging due to evaporation processes, physical-chemical reactions, wood contributions and microbiological activity. During aging, Sherry wines improve their organoleptic profile, as could be proved in the tasting sessions. Hierarchical Cluster Analysis and Factor Analysis with factor extraction using Principal Components of Sherry wines studied were carried out and natural groupings of the wines according to the type of aging and their age were observed. A strong correlation between the parameters analyzed and the aging of each wine has been seen in the Multiple Linear Regression studies, establishing two different models, one for each type of Sherry wine, that, with only four of all the variables studied estimated the wine age with more than 99% of confidence. This constitutes a useful tool to control the age of these Sherry wines in the winery.     

Influence of Caffeic and Caftaric Acid,Fructose, and Storage Temperature on Furan Derivatives in Base Wine

The aim of this study was to determine the influence of caffeic and caftaric acid, fructose, and storage temperature on the formation of furan-derived compounds during storage of base wines. Base wines produced from Chardonnay grapes were stored at 15 and 30 °C for 90 days with additions of fructose, caffeic acid, and caftaric acid independently or in combinations. Wines were analyzed following 90 days of storage for: total hydroxycinnamic acids, degree of browning, caffeic acid and caftaric acid concentrations, and nine furan-derived compounds. Caffeic and caftaric acid additions increased homofuraneol concentration by 31% and 39%, respectively, at 15 °C (p < 0.05). Only the addition of caffeic acid increased furfural by 15% at 15 °C (p < 0.05). Results demonstrate that some furan derivatives over 90 days at 15 °C increased slightly with 5 mg/L additions of caffeic and caftaric acid. This is the first time the influence of hydroxycinnamic acids on furan-derived compounds has been reported during short-term aging of base wine at cellar temperature.     

Does the Temperature of the prise de mousse Affect the Effervescence and the Foam of Sparkling Wines?

The persistence of effervescence and foam collar during a Champagne or sparkling wine tasting constitute one, among others, specific consumer preference for these products. Many different factors related to the product or to the tasting conditions might influence their behavior in the glass. However, the underlying factor behind the fizziness of these wines involves a second in-bottle alcoholic fermentation, also well known as the prise de mousse. The aim of this study was to assess whether a low temperature (13 °C) or a high temperature (20 °C) during the in-bottle fermentation might have an impact on the effervescence and the foaming properties (i.e., collar height and bubble size) of three French sparkling wines (a Crémant de Loire and two Champagne wines), under standard tasting conditions. Our results showed that sparkling wines elaborated at 13 °C and served in standard tasting conditions (i.e., 100 mL, 18 °C) had better ability to keep the dissolved CO₂ (between 0.09 and 0.30 g/L) in the liquid phase than those elaborated at 20 °C (with P < 0.05). Most interestingly, we also observed, for the Crémant de Loire and for one Champagne wine, that the lower the temperature of the prise de mousse, the smaller (with P < 0.05) the bubbles in the foam collar throughout the wine tasting.