辛巴蓝FEG—A固载的交联聚乙烯醇作为亲和色谱填料

以乙酸丁酯和正庚烷作为致孔剂,乙酸乙烯酯与异氰酸三烯丙基酯进行悬浮共聚、经碱性水解得到大孔交联聚乙烯醇树脂。交联聚乙烯醇与环氧氯丙烷在碱性条件下反应,得到含有环氧基的树脂。含有环氧基的树脂与6-氨基已基-N'-辛巴蓝FEG-A反应,制得固载辛巴蓝FEG-A（一种三嗪染料）的交联聚乙烯醇树脂。将固载辛巴蓝FEG-A的交联聚乙烯醇树脂作为亲和色谱填料,对五种蛋白质（细胞色素c、溶菌酶、牛血清白蛋白、胰岛素和乳酸脱氢酶）进行了色谱分离。     

以交联聚乙烯醇为载体的阴离子交换剂的合成与性能研究

大孔乙酸乙烯酯－异氰尿酸三烯丙酯共聚物树脂经醇解生成亲水性的交联聚乙烯醇，然后相继与环氧氯丙烷和二乙胺反应，合成出含二乙基氨基羟丙基的阴离子交换剂，研究了交联聚乙烯醇环氧基化的最佳条件，发现以二甲基亚砜作溶剂能够显著地提高活化程度，反应时间以３ｈ为最佳，并研究了该阴离子交换剂的交换量、亲水性、热稳定性、溶胀稳定性，发现它具备常压分离蛋白质所需的基本性能，是较为理想的生化用的离子交换剂。     

一种新型低密度脂蛋白吸附剂的制备

通过在环氧化的交联聚乙烯醇球上固载多乙烯多胺和磺酸基团的方法制备一种新型的低密度脂蛋白吸附剂.环氧化的交联聚乙烯醇球首先与乙二胺或二乙烯三胺、三乙烯四胺及四乙烯五胺等多乙烯多胺进行胺化反应,由此获得不同长度悬臂,而后将胺化的环氧化的交联聚乙烯醇球与DMF/ClSO₃H反应,从而固载磺酸基团.磺酸基团的固载量随交联度的减小和聚乙烯醇浓度的增大而增大.初步研究证实,该类吸附剂具有较大的吸附量和较好的选择性.     

环氧化交联聚乙烯醇球的制备

由于具备优良的生物相容性及大量可以用于修饰的羟基，交联聚乙烯醇球可以用作医用吸附剂的载体。本文对交联聚乙烯醇球的制备条件进行了详细研究，并讨论了环氧基的固载条件，分析了球的交联度、单体浓度对交联聚乙烯醇珠的粒径分布、溶胀度和环氧基团固载量的影响。     

单分散亲水两性离子交换树脂的制备及其在生物大分子分离中的应用

采用分散聚合与溶胀聚合相结合的方法及高分子溶液致孔技术, 成功地制备了粒径为5.0 μm大孔和超大孔结构的单分散亲水性交联聚甲基丙烯酸环氧丙酯树脂, 并进行了结构表征. 将该树脂经胺化后再与1,3-丙磺酸内酯反应, 得到一种新型的两性离子交换(强阳-强阴型)高效液相色谱填料. 研究了该填料对标准蛋白分离性能及流动相中有机溶剂、 流速和pH值对蛋白保留的影响. 实验结果表明, 在流速为3 mL/min时, 采用线性梯度洗脱, 在4.0 min内可同时快速基线分离3种酸性和2种碱性蛋白.     

聚甲基丙烯酰胺型配体交换色谱载体的研究

通过交联聚甲基丙烯酸甲酯与过量的乙二胺或多乙烯多胺反应,然后再与氯乙酸反应得到含有α-胺基乙酸基团的亲水性的聚甲基丙烯酰胺树脂.用这些树脂的Cu~(2+)络合物作为色谱载体对中性氨基酸进行分离.研究了色谱条件如洗脱剂组成、流速和柱温对分离的影响.     

大孔交联聚乙烯咪唑啉树脂的合成及性能研究

本文分别以二乙烯苯和双甲基丙烯酸乙二醇酯为交联剂,合成了大孔交联聚丙烯腈吸附树脂,测定了两系列树脂的孔和表面性能。同时以上述材料为母体,通过与乙二胺反应将腈基进行化学转化,制得大孔交联聚乙烯咪唑啉树脂,并探讨了该树脂在碱性介质中(pH10)对Au~+的吸附性能。     

交联聚苯乙烯树脂固载甲酰基的微波辅助还原

在微波照射的相转移催化(MI-PTC)条件下,3种甲酰基功能化的交联聚苯乙烯树脂——对甲酰基苯氧基甲基树脂、对甲酰基-2-甲氧基苯氧基甲基树脂和对甲酰基-3-甲氧基苯氧基甲基树脂固载的甲酰基被NaBH4还原,得到相应的3种苄羟基功能化的树脂——Wang树脂、Sasrin树脂和新型的对苄羟基-3-甲氧基苯氧基甲基树脂.考察了溶剂、相转移催化剂等因素对反应的影响,优化的反应介质为THF/H2O混合溶剂,相转移催化剂为苄基三羟乙基氯化铵(BTHAC).然而,在传统加热和微波辐射条件下,最有效混合溶剂的配比有所不同.在水浴加热条件下,最有效的反应溶剂为12 mL THF+3 mL H2O;而在微波加热的条件下,最有效的反应溶剂却是3 mL THF+12 mL H2O.在优化的溶剂、催化剂条件下,微波功率为60 W时,高分子固载的甲酰基30 min之内几乎被定量地还原成羟基.与传统加热方式比较,MI-PTC还原聚苯乙烯固载甲酰基可以大大缩短反应时间,提高反应效率,是一种进行高分子化合物官能团转化的良好方法.     

交联聚丙烯酸固载化氧化β-环糊精的合成及其对尿素的吸附性能

大孔交联聚丙烯酸树脂(D151和D152)用氯化亚砜转化为酰氯后,通过成酯反应固载β-环糊精,再进一步用高碘酸钠氧化,合成出具有环状多醛结构的交联聚丙烯酸固载化氧化β-环糊精。系统研究了反应条件对β-环糊精固载化反应的影响,发现摩尔投料比(—COC1/β-CD)为1.5—1/1、温度80℃、时间24 h为最佳固载反应条件。探讨交联聚丙烯酸固载化氧化β-环糊精对尿素的吸附性能,阐明了吸附时间、溶液中尿素浓度、及介质pH值等对吸附量的影响。在尿素浓度130 mg/dL、吸附时间4h、介质pH 7、温度25℃时,交联聚丙烯酸固载化氧化β-环糊精对尿素呈现出最大吸附量82.13 mg/g。     

特大孔交联苯乙烯-二乙烯苯共聚物的制备和孔结构研究Ⅰ

本文以聚乙酸乙烯酯配合其它溶剂(如乙酸乙酯、正辛醇、二氧六环等)作致孔剂,制成了一系列孔径在数万埃,孔容为1ml/g(干树脂)左右的苯乙烯-二乙烯苯系特大孔交联共聚物,并进行了部分功能基反应,制成了强碱阴离子交换树脂,还讨论了一些实验结果。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Copper catalyzed/mediated synthetic methodology for ebselen and related isoselenazolones

Scope of the copper catalyzed/mediated selenium-nitrogen coupling reaction has been studied for the synthesis of isoselenazolones. It is noticed that the 2-chloro, 2-bromo-, and 2-iodo-aryl amides substrates can be exploited in the selenium-nitrogen coupling reaction by employing 25-100 mol % of CuI/1,10-phenanthroline (L) and potassium carbonate as a base in DMF. Furthermore, electron rich 2-chloro-arylamides also underwent selenium-nitrogen coupling reaction to give biologically important selenium-nitrogen heterocycles. Also, copper-catalyzed selenium-nitrogen coupling reaction has been meticulously applied for the synthesis of diaryl diselenides having methoxy, amine, and amide functionality from respective aryl iodides in the presence of stoichiometric amount of succinimide as an external Se-N coupling partner.