Boron trifluoride-catalyzed degradation of poly--caprolactone at ambient temperature

Poly--caprolactone (PCL) can be accelerated to degrade in the presence of boron trifluoride at ambient temperature. The degradation behaviors were studied by using the inherent viscosity measurement, gel permeation chromatography (GPC), infrared analysis (FTIR), nuclear magnetic resonance analysis (NMR), and thermal analysis (DSC). With increasing the addition amount of boron trifluoride, the molecular weight of PCL decreases; the molecular weight distribution is broadened; and the degree of crystallinity of PCL increases at first at low BF₃ level, then decreases when BF₃ content exceeds to 2.64 wt%. The results of IR, ¹HNMR and GPC reveal that -caprolactone monomer does not occur and the main degradation products are the oligomers of PCL with low molecular weight. The mechanism for boron trifluoride-catalyzed degradation of PCL is discussed.     

Blue-shifting intramolecular CH O(S) contacts in sterically strained systems

A group of model systems which may form chelate-type structures with intramolecular CH  Y (Y = O, S) contact is investigated computationally. The existence of several conformers permits to identify a reference molecule without the CH  Y intramolecular contact and to establish the blue-shifting character of this interaction. The CH stretching frequency in chelate forms is found to increase with respect to its value in the reference system. A parallel decrease of the CH bond distance is also established. The blue-shifting character of the intramolecular CH  Y contact is interpreted in terms of the sterically enforced repulsion between the hydrogen atom in CH and the electron donor Y. This interpretation is supported by the negative (repulsive) estimates of the energy contribution due to CH  Y contacts.     

Monomer insertion mechanism of ring-opening polymerization of -caprolactone with yttrium alkoxide intermediate: A DFT study

The mechanism of -caprolactone (CL) insertion into a Y–OCH₃ bond was investigated using density functional theory (DFT) calculations. The optimized geometries and corresponding Gibbs-free energies of the intermediates were obtained, which confirmed a four-step coordination-insertion mechanism. The coordination of CL onto yttrium center led to a nucleophilic addition of the carbonyl group of CL, followed by an intramolecular alkoxide ligand exchange. A monomer insertion was completed by the CL ring opening via acyl–oxygen bond cleavage. The formation of the five-coordinated yttrium intermediate, 3, was found to be the rate-determining step. This study could be applicable to ring-opening polymerisation (ROP) of CL initiated by lanthanide metal complexes.     

The catalytic effects of various third molecules on reaction channels of weakly bound complex CO2HF systems in the vapor phase

In this investigation, reaction channels of weakly bound complexes CO₂HF, CO₂HFH₂O, CO₂HFNH₃, CO₂HFCH₃OH, CO₂HFNH₂CH₃, CO₂HFNH(CH₃)₂ and CO₂HFN(CH₃)₃ systems were studied at the B3LYP/6-311++G(3df,2pd) level. The conformers of syn-fluoroformic acid or syn-fluoroformic acid plus a third molecule (H₂O, NH₃, CH₃OH, NH₂CH₃, NH(CH₃)₂ or N(CH₃)₃) were found to be more stable than the conformers of the related anti-fluoroformic acid or anti-fluoroformic acid plus a third molecule (H₂O, NH₃, CH₃OH, NH₂CH₃, NH(CH₃)₂ or N(CH₃)₃). However, the weakly bound complexes were found to be more stable than either the related syn- and anti- type fluoroformic acid or the acid plus third molecule (H₂O, NH₃, CH₃OH, NH₂CH₃, NH(CH₃)₂ or N(CH₃)₃) conformers. They decomposed into CO₂+HF, CO₂+H₃OF, CO₂+NH₄F, CO₂+(CH₃)OH₂F, CO₂+NH₃(CH₃)F, CO₂+NH₂(CH₃)₂F, or CO₂+NH(CH₃)₃F combined molecular systems. The weakly bound complexes have seven reaction channels, each of which includes weakly bound complexes and their related systems. Moreover, each reaction channel includes two transition state structures. The transition state between the weakly bound complex and anti-fluoroformic acid type structure (T₁₃) is significantly higher than that of internal rotation (T₂₃) between the syn- and anti-FCO₂H (or FCO₂HH₂O, FCO₂HNH₃, FCO₂HCH₃OH, FCO₂HNH₂CH₃, FCO₂HNH(CH₃)₂, or FCO₂HN(CH₃)₃) structures. However, adding the third molecule H₂O, NH₃, CH₃OH, NH₂CH₃, NH(CH₃)₂ or N(CH₃)₃ can significantly reduce the activation energy of T₁₃. The catalytic strengths of the third molecules are predicted to follow the order H₂O<NH₃<CH₃OH<.NH₂CH₃<NH(CH₃)₂<N(CH₃)₃.     

Effect of magnetostrictive phase on structural, dielectric and electrical properties of NiFe2O4 + Pb0.93La0.07(Zr0.60Ti0.40)O3 composites

Particulate composites of NiFe₂O₄ (NFO) and Pb_0.93La_0.07 (Zr_0.60Ti_0.40) O₃ (PLZT) were synthesized by solid-state reaction technique. Structure and surface morphological studies were carried out using X-ray diffraction and scanning electron microscopy techniques, respectively. Frequency dependent variation of dielectric constant (), loss tangent (tan δ) and ac resistivity for (x) NFO + (1−x) PLZT composites in the range 100 Hz–5 MHz at room temperature were studied. The temperature dependence of dielectric constant (′), loss tangent (tan δ) was studied in wide temperature range of measurement at fixed frequencies. Also DC resistivity measurements were carried out in the temperature range of 300 K–923 K. Structural, dielectric and electrical properties show notable change due to presence of magnetostrictive NFO phase along with PLZT.     

Patterning of biomolecules on a poly(-caprolactone) film surface functionalized by ion implantation

Biomolecule patterning is important due to its potential applications in biodevices, tissue engineering, and drug delivery. In this study, we developed a new method for a biomolecular patterning on poly(-caprolactone) (PCL) films based on ion implantation. Ion implantation on a PCL film surface resulted in the formation of carboxylic acid groups. The generated carboxylic acid groups were used for the covalent immobilization of amine-functionalized p-DNA, followed by hybridization with fluorescently tagged c-DNA. Biotin-amine was also covalently immobilized on the carboxylic acid generated PCL surfaces. Successful biotin-specific binding of streptavidin further confirmed the potential of this strategy for patterning of various biomolecules.     

Degradation of copolymers obtained by ring-opening polymerization of glycolide and -caprolactone: A high resolution NMR and ESI-MS study

Electrospray ionization-mass spectrometry (ESI-MS) and proton nuclear magnetic resonance (¹H NMR) have been used to investigate the hydrolytic degradation of copolymers obtained by bulk ring-opening copolymerization of glycolide and -caprolactone with monomer ratios ranging from 70/30 to 30/70. NMR allows changes of the average sequence distribution and composition of the components to be followed. In contrast, ESI-MS is able to reveal the detailed chemical structures of various sequences despite the molecular weight limit of 2000 Da. Combination of ESI-MS with NMR can thus provide information to describe microstructure changes during degradation. The distribution of various oligomers shown in the form of planar projections is of great interest for the design of biodegradable system aimed at medical applications.     

Atmospheric chemistry of CF3CFCH2: Products and mechanisms of Cl atom and OH radical initiated oxidation

The products of Cl atom and OH radical initiated oxidation of CF₃CFCH₂ were studied in 700 Torr of N₂/O₂ diluent at 296 ± 1 K. The reactions of Cl atoms and OH radicals with CF₃CFCH₂ proceed via electrophilic addition to the double bond. The reaction with chlorine atoms proceeds 56 ± 5% via addition to the central carbon. The chlorine atom initiated oxidation of CF₃CFCH₂ gives CF₃C(O)F in a molar yield which is indistinguishable from 100% and independent of [O₂], and HC(O)Cl in a molar yield which increased from 30% to 59% as [O₂] was increased from 3 to 700 Torr. The OH radical initiated oxidation of CF₃CFCH₂ gives CF₃C(O)F as major product in a yield of 91 ± 6%. The results are discussed with respect to the atmospheric chemistry and environmental impact of CF₃CFCH₂.     

Weak hydrogen-, halogen- and stacking ππ bonding in crystalline 5-chloro-1-indanone. An analysis by using X-ray diffraction, vibrational spectroscopy and theoretical methods

Intermolecular forces of C–HO, C–Hπ, COCl and ππ types are present in the stable triclinic crystal structure of 5-chloro-1-indanone. They are analysed from a geometrical point of view supported in some extent by the analysis of the vibrational spectrum of the titled compound. Moreover, the molecular structure of the isolated species is calculated by using ab initio as well as density functional theory (DFT) methods together an assortment of basis sets. In order to obtain some information about the influence of intermolecular forces on the molecular structure, the calculated geometries of a free molecule were compared with the experimental solid phase geometry determined by X-ray crystallography.An analysis and assignment of the vibrational spectrum of the 5-chloro-1-indanone is accomplished by using IR and Raman experimental data along with Pulay et al.’s scaled quantum mechanical force field (SQM) methodology starting from the theoretical B3LYP/6-31G(d) and BLYP/6-31G(d) force fields under C_s symmetry.     

Distribution of Sorbitan Monooleate in poly(l-lactide-co--caprolactone) nanofibers from emulsion electrospinning

The aim of this study was to investigate the distribution of Sorbitan Monooleate (Span80) in poly(l-lactide-co--caprolactone) (PLLACL) nanofibers from emulsion electrospinning. The hypothesis was that PLLACL/Span80 nanofibrous mats would have some Span80 on the surface of the composite nanofibers. To test the hypothesis, the electrospinning of emulsions made of PLLACL, chloroform, Span80, and distilled water to prepare PLLACL/Span80 nanofibers was systematically investigated. The morphology of PLLACL/Span80 nanofibers was investigated by atomic force microscopy. The surface hydrophilicity of the nanofibrous mats were examined by water contact angle test. The distribution of Span80 on the surface of nanofibrous mats was also confirmed by the performance of pig iliac endothelium cells on the nanofibrous mats.     

Effects of dipole interaction and solvation on the CO stretching band of N,N-dimethylacetamide in nonpolar solutions: Infrared, isotropic and anisotropic Raman measurements

The concentration dependence of the CO stretching (ν_CO) band of N,N-dimethylacetamide (NdMA) in cyclohexane, n-hexane, and CCl₄ has been investigated by infrared (IR) and polarized Raman spectroscopy. For the neat liquid of NdMA, the noncoincidence of the aniso- and isotropic Raman wavenumbers is evident. In the 0.47 M cyclohexane solution of NdMA, the noncoincidence effect almost disappears and the ν_CO envelopes in both the Raman and IR spectra are asymmetric to the low-wavenumber side. When the concentration of NdMA decreases from 0.33 to 0.023 M, the peak of these bands slightly shifts to a higher wavenumber and the band shape becomes symmetric. The shape of the ν_CO envelope does not show any significant change below 0.023 M. These results suggest that the asymmetric shape of the ν_CO band observed for the 0.33 M cyclohexane solution is associated with the intermolecular interaction among NdMA molecules, which vanishes at around 0.02 M. Spectral changes for the CCl₄ solution of NdMA show a similar tendency. However, the shape and peak wavenumber of the ν_CO band observed in a highly diluted CCl₄ solution (≤0.023 M) indicate that the solvation effect of CCl₄ is more complicated than those of cyclohexane and n-hexane. The analyses of the ν_CO band, which is sensitive to the intermolecular interaction between solutes and between solute and solvent for NdMA dissolved in nonpolar solvents, would serve to clarify the electronic property of the molecule in a solution.     

Pyrolysis of poly(phenylene vinylene)s with polycaprolactone side chains

The thermal degradation characteristics of a new macromonomer poly(-caprolactone) with central 4,4′-dicarbaldehyde terphenyl moieties and poly(phenylene vinylene)s with well defined (-caprolactone), (PPV/PCL) as lateral substituents were investigated via direct pyrolysis mass spectrometry. The unexpectedly high thermal stability of the macromonomer was attributed to intermolecular acetylation of benzaldehyde yielding a hemiacetal and causing a crosslinked structure during the pyrolysis. Increased thermal stability of the PCL chains was detected for all samples. The increase in stability of PCL chains was much more pronounced than was detected for poly(p-phenylene)-graft-poly(-caprolactone) copolymer (PPP/PCL); the upward temperature shift was about 100 °C for PPV/PCL and only 20 °C for PPP/CL. This pronounced effect may be due to higher thermal stability of PPV compared to PPP and the decrease in steric hindrance for PPV with PCL side chains.     

Molecular structure and conformation of diethylmethylamine determined by gas electron diffraction and vibrational spectroscopy combined with theoretical calculations

We have investigated the molecular structure and conformation of diethylmethylamine, C(4)H₃C(2)H₂N(1)[CH₃]C(3)H₂C(5)H₃, by gas electron diffraction and vibrational spectroscopy with the aid of theoretical calculations. Diffraction data are consistent with a conformational mixture of 35(14)% tt + 27(14)% g⁺t + 20(17)% g⁻t + 18(23)% g⁺g⁺ where the numbers in parentheses denote three times the standard errors (3σ). Normal-coordinate analysis based on B3LYP/6-311+G^** calculations supports the existence of the four conformers. The dihedral angle ₁(C4C2N1C3) (= −₂(C5C3N1C2)) of the tt conformer was 170(4)° whereas the ₁ and ₂ values of the other conformers were fixed at the B3LYP/6-311++G(2df,p) values: 72.4° and −163.3° for the g⁺t, −66.0° and −158.2° for the g⁻t, and 60.3° and 63.5° for the g⁺g⁺. Average values of the structural parameters (r_g/Å and _α/°) with 3σ are: r(N–C) = 1.462(2), r(C–C) = 1.523(3), r(C–H) = 1.113(2), CNC = 111.6(5), NCC = 114.5(5), NCH/CCH_Me = 110.6(5).     

DFT study on second-order nonlinear optical properties of the derivatives of 7-vertex cobalt–carborane metallocenyl

Density functional theory (DFT) B3LYP method was employed to calculate electron properties and the second-order nonlinear optical (NLO) responses of the derivatives which were formed by (C₅H₅)Co(C₂B₄H₆) and CHCHC₆H₄NO₂, CHCHC₆H₄NH₂. The results show: when H atom of (C₅H₅)Co(C₂B₄H₆) is substituted by CHCHC₆H₄NO₂, the β_tot values of isomers are all slightly smaller than that of ferrocene (Fc) derivative (FcCHCHC₆H₄NO₂). However, when H atom of (C₅H₅)Co(C₂B₄H₆) is substituted by CHCHC₆H₄NH₂, the β_tot values of isomers are close to that of ferrocene (Fc) derivative (FcCHCHC₆H₄NH₂). It indicates that (C₅H₅)Co(C₂B₄H₆) can be either a donator or an acceptor.     

Unimolecular chemistry of metastable dimethyl isophthalate radical cations

The MS/MS spectrum of the metastable molecular ions of dimethyl isophthalate 1 differs from that of the isomeric dimethyl terephthalate 2 by the observation of, inter alia, a quite intense loss of C,H₂,O ascribed to formaldehyde. Results obtained using a combination of mass spectrometry techniques suggest that this process could consist of an isomerization reaction of the molecular ion into an ion–neutral complex (INC) linking a benzoyl radical and neutral formaldehyde to a proton [ArCOHOCH₂]⁺. Within the complex, a proton transfer catalyzed by formaldehyde occurs resulting in the production of an ionized cyclohexadienylidene methanone (ketene) structure.     

Conformational dependence of the second hyperpolarizability of quadrupolar molecules

Hatree–Fock calculations at ab initio and semiempirical levels were carried out for the averaged polarizability α and second hyperpolarizability γ of two pairs of quadrupolar isomers with different donor and acceptor groups. These properties were correlated with the antibonding/bonding π occupation number (π*/π ratio). It was found that isomers with extended π systems had low π*/π ratios and high α and γ values, while low α and γ values were obtained for isomers with large π*/π ratios and no extended π system. The PM3 and PM6 α values were found to be in excellent agreement with the HF/6-31+G(d,p) ones. The PM3 values for γ were significantly larger than those calculated by HF/6-31+G(d,p), with an average PM3/HF ratio of 1.43. The PM6 results were noticeably better with a ratio of 0.85. The calculation of α and γ at MP2/6-31+G(d,p) level for representative isomers showed that the contribution of the electron correlation to their values was small and that the HF/6-31+G(d,p) method provides reliable values at much lower computational cost.     

H NMR Dynamic study of thermal Z/E isomerization of 5-substituted 2-alkylidene-4-oxothiazolidine derivatives: Barriers to rotation about CC bond

The rotational barriers between the configurational isomers of two structurally related push–pull 4-oxothiazolidines, differing in the number of exocyclic CC bonds, have been determined by dynamic ¹H NMR spectroscopy. The equilibrium mixture of (5-ethoxycarbonylmethyl-4-oxothiazolidin-2-ylidene)-1-phenylethanone (1a) in CDCl₃ at room temperature to 333 K consists of the E- and Z-isomers which are separated by an energy barrier ΔG^# 98.5 kJ/mol (at 298 K). The variable-temperature ¹H NMR data for the isomerization of ethyl (5-ethoxycarbonylmethylidene-4-oxothiazolidin-2-ylidene)ethanoate (2b) in DMSO-d₆, possessing the two exocyclic CC bonds at the C(2)- and C(5)-positions, indicate that the rotational barrier ΔG^# separating the (2E,5Z)-2b and (2Z,5Z)-2b isomers is 100.2 kJ/mol (at 298 K). In a polar solvent-dependent equilibrium the major (2Z,5Z)-form (>90%) is stabilized by the intermolecular resonance-assisted hydrogen bonding and strong 1,5-type S · · · O interactions within the SCCCO entity. The ¹³C NMR Δδ_C(2)C(2′) values, ranging from 58 to 69 ppm in 1a–d and 49-58 ppm in 2a–d, correlate with the degree of the push-pull character of the exocyclic C(2)C(2′) bond, which increases with the electron withdrawing ability of the substituents at the vinylic C(2′) position in the following order: COPh COEt > CONHPh > CONHCH₂CH₂Ph. The decrease of the Δδ_C(2)C(2′) values in 2a–d has been discussed for the first time in terms of an estimation of the electron donor capacity of the S fragment on the polarization of the CC bonds.     

Gas-phase reactions of halogenated radical carbene anions with sulfur and oxygen containing species

The reactivities of mono- and dihalocarbene anions (CHCl⁻, CHBr⁻, CF₂⁻, CCl₂⁻, and CBrCl⁻) were studied using a tandem flowing afterglow-selected ion flow tube instrument. Reaction rate constants and product branching ratios are reported for the reactions of these carbene anions with six neutral reagents (CS₂, COS, CO₂, O₂, CO, and N₂O). These anions were found to demonstrate diverse chemistry as illustrated by formation of multiple product ions and by the observed reaction trends. The reactions of CHCl⁻ and CHBr⁻ occur with similar efficiencies and reactivity patterns. Substitution of a Cl atom for an H atom to form CCl₂⁻ and CBrCl⁻ decreases the rate constants; these two anions react with similar efficiencies and reactivity trends. The CF₂⁻ anion displays remarkably different reactivity; these differences are discussed in terms of its lower electron binding energy and the effect of the electronegative fluorine substituents. The results presented here are compared to the reactivity of the CH₂⁻ anion, which has previously been reported.     

Nucleophilic destruction of organophosphate toxins: A computational investigation

Computed reaction enthalpies, free energies, and activation barriers in vacuo are presented for the nucleophilic detoxification of the organophosphorus compounds (H)(HO)P(O)F, (H)(H₃CO)P(O)F and (H₃C)(CH(CH₃)₂O)P(O)F via the reaction R₁OH + (R₂)(R₃O)P(O)F → (R₂)(R₃O)P(O)(OR₁) + HF for a wide variety of R₁OH nucleophiles. Density functional theory at the B3LYP/6-311++G(d,p) computational level was employed for all the calculations. A multi-step Wright-type reaction mechanism [J. B. Wright, W.E. White, J. Mol. Struct. (THEOCHEM) 454 (1998) 259], which proceeds via a proton transfer from the nucleophile to the fluorine atom through the phosphinyl oxygen atom, was consistently found to have a lower activation barrier in the gas-phase than for the corresponding mechanism that operates via a proton transfer from the nucleophile directly to the fluorine atom. Of the nucleophilic agents investigated, peroxybenzoic acid and o-iodosobenzoic acid had the lowest classical activation barrier for the Wright-type mechanism.     

Specific crystal structure of poly(3-hydroxybutyrate) thin films studied by infrared reflection–absorption spectroscopy

Infrared reflection–absorption (IR-RAS) and transmission spectra were measured for poly(3-hydroxybutyrate) (PHB) thin films to explore its specific crystal structure in the surface region. As IR-RAS is sensitive to the vibration mode of perpendicular orientation of the surface, differences between IR-RAS and transmission spectra indicate an orientation of the lamella structure in the surface of PHB thin films. The relative intensity of the crystalline CO stretching band in the IR-RAS spectrum is significantly weaker than that in the transmission spectrum. It may be concluded that the transient dipole moment of the CO stretching mode of the crystalline state is not oriented perpendicular but nearly parallel to the substrate surface. On the other hand, the relative intensity of the band at 3009 cm⁻¹ due to the C–H stretching mode of the C–HOC hydrogen bonding is similar between the IR-RAS and transmission spectra, suggesting that the C–H bond is oriented neither perpendicular nor parallel to the substrate surface but in an intermediate direction. Since the CO group of the C–HOC hydrogen bonding is oriented nearly parallel to the surface and its C–H group is in the intermediate direction, it is very likely that the C–HOC hydrogen bonding has a somewhat bent structure. These results are in good agreement with our previous conclusion that the C–HOC hydrogen bonding of PHB exists along the a-axis (not the b-axis) between the CH₃ group of one helix and the CO group of another helix.