Single-step purification of different lipases from Staphylococcus warneri

Three different lipases from the extract crude of Staphylococcus warneri have been purified by specific lipase–lipase interactions using different lipases (TLL, RML, PFL, BTL2) covalently attached to a solid support as adsorption matrix. BTL2 immobilized on glyoxyl-DTT adsorbed selectivity only a 30 kDa lipase from the crude, which was desorbed by adding 0.1% triton X-100. Using glyoxyl-PFL as matrix, two new lipases (28 and 40 kDa) were adsorbed, and completely pure 40 kDa lipase was obtained after desorption using 0.01% triton, whereas 28 kDa lipase was desorbed after the incubation of the lipase matrix with 3% detergent. When using other matrixes as glyoxyl-TLL or glyoxyl-RML, different lipases were adsorbed. This methodology could be a very efficient and useful method to purify several lipases from crude extracts from different sources.     

General characterization of noncommercial microbial lipases in hydrolytic and synthetic reactions

Fourteen noncommercial preparations of microbial lipases were investigated with respect to their catalytic activity for hydrolysis and synthesis of ester bonds. Six of the lipases were derived from microorganisms that have not previously been described as lipase producers, and another four were characterized for the first time. The synthetic reactions were carried out in two solvents of different polarities (n-heptane and acetone) using a series of fatty acids and primary and secondary alcohols with different chain lengths. Under the culture conditions employed, Pseudomonas cepacia produced more active enzyme than the other microorganisms. The lipase preparations produced using Ovadendron sulphureo-ochraceum, Monascus mucoroides, Monascus sp., Fusarium oxysporum, Penicillium chrysogenum, Rhodotorula araucariae, Pseudomonas cepacia, Streptomyces halstedii, and Streptomyces sp. were the most efficient catalysts for hydrolysis at lipid-water interfaces. Enzyme preparations from P. cepacia, Streptomyces sp., S. halstedii, and R. araucariae were good biocatalysts for esterification in the polar medium (acetone). When the lipase preparations with the greatest activity for hydrolytic, reactions were excluded, regression analysis of the data for the hydrolytic and synthetic activities of the remaining lipase preparations yielded high multiple correllation coefficients for these reactions in both n-heptane and acetone (R=0.82 and 0.91, respectively).     

Contribution of blotting techniques to the study of rapeseeds (Brassica napus L.) lipases

A recent advance in the study of plant lipases involving immunological techniques is presented. In an attempt to characterize lipases of cotyledons from germinating rapeseed seedlings and to investigate an eventual cross-reactivity with animal lipases, we have prepared anti-porcine pancreatic lipase antibodies raised in rabbit. It is shown by enzyme-linked immunosorbent assay and dot-blotting that these antibodies react with lipases in the rapeseed crude extract and in the different cellular fractions obtained by differential centrifugation. Preincubation of the antiserum with the rapeseed crude extract affects the amount of antibodies binding to the porcine pancreatic lipase. We demonstrate immunochemical cross-reactivity between rapeseed and porcine pancreatic lipase. Using the immunoblotting procedure, it is found that antibodies bind specifically to a single polypeptide with a molecular mass of about 55 kDa. Rapeseed lipase activity decreased after immunoprecipitation suggesting that antibodies were bound to some catalytic site residues. We conclude from the data obtained in this study that the two different lipase species present close similarities in amino acid sequence and antigen characteristics.     

Contribution to the study of the alteration of lipase activity ofCandida rugosa by ions and buffers

A semipurifiedC. rugosa lipase (LS) has been prepared from commercial lipase (LC) using an economical procedure. The presence of sugars and glycopeptides has been detected in LS and LC. Pure lipase only has covalently bonded sugars. The hydrolysis of olive oil catalyzed by LS and commercial lipase (LC) is sensitive to the presence of cations Na(I), Mg(II), Ca(II), and Ba(II) and to the nature of buffer. Highest enzyme activity is obtained with 0.1M Tris/HCl buffers and the combination of NaCl 0.11M and CaCl₂ 0.11M. Fluorescence spetroscopy analysis of LC, LS, and both pure isoenzymes lipases A and B, was used to analyze the interaction of the lipase with these effecttors. Inorganic cations Na or Ca do not interact with pure enzyme LA but do interact with LC and LS and do so slightly with LB. The organic cations (morfolinium ortris) interact with pure lipases. We postulate that the increase in the lipase activity produced by Na(I) or Ca(II) is related with interfacial phenomena, but the increase might be more specific in the hydrolysis of olive oil in the presence of Tris-HCl or morfoline-HCl buffer, owing to enzyme-buffer interaction.     

Effect of temperature, moisture, and carbon supplementation on lipase production by solid-state fermentation of soy cake by Penicillium simplicissimum

The production of lipases by Penicillium simplicissimum using solid-state fermentation and soy cake as substrate was investigated. The effects of temperature, cake moisture, and carbon supplementation on lipase production were studied using a two-level experimental plan. Moisture, pH, and lipase activity were followed during fermentation. Statistical analysis of the results was performed to evaluate the effect of the studied variables on the maximum lipase activity. Incubation temperature was the variable that most affected enzyme activity, showing a negative effect. Moisture and carbon supplementation presented a positive effect on activity. It was possible to obtain lipase activity as high as 21 U/g of dry cake in the studied range of process variables.     

Enzymatic Synthesis of Biodiesel via Alcoholysis of Palm Oil

The enzymatic alcoholysis of crude palm oil with methanol and ethanol was investigated using commercial immobilized lipases (Lipozyme RM IM, Lipozyme TL IM). The effect of alcohol (methanol or ethanol), molar ratio of alcohol to crude palm oil, and temperature on biodiesel production was determined. The best ethyl ester yield was about 25 wt.% and was obtained with ethanol/oil molar ratio of 3.0, temperature of 50 °C, enzyme concentration of 3.0 wt.%, and stepwise addition of the alcohol after 4 h of reaction. Experiments with 1 and 3 wt.% of KOH and 3 wt.% of MgO were carried out to compare their catalytic behavior with the enzymatic transesterification results. The commercial immobilized lipase, Lipozyme TL IM, showed the best catalytic performance.     

Enzymatic Hydrolysis of Polylactic Acid Fiber

This study investigated the optimization of the enzymatic processing conditions for polylactic acid (PLA) fibers using enzymes consisting of lipases originating from different sources. The hydrolytic activity was evaluated taking into consideration the pH, temperature, enzyme concentration, and treatment time. The structural change of the PLA fibers was measured in the optimal treatment conditions. PLA fiber hydrolysis by lipases was maximized for lipase from Aspergillus niger at 40 °C for 60 min at pH 7.5 with 60% (owf) concentration, for lipase from Candida cylindracea at 40 °C for 120 min at pH 8.0 with 70% (owf) concentration, and for lipase from Candida rugosa at 45 °C for 120 min at pH 8.0 with 70% (owf) concentration. There was a change in protein absorbance of the treatment solution before and after all lipase treatments. The analyses of the chemical structure change and structural properties of the PLA due to lipase treatment was confirmed by tensile strength, differential scanning calorimetry, wide-angle X-ray scattering diffractometry, Fourier transform infrared spectroscopy, and scanning electron microscopy.     

Catalytic effect of calix[n]arene based sol–gel encapsulated or covalent immobilized lipases on enantioselective hydrolysis of (R/S)-naproxen methyl ester

In this paper the catalytic performance of the immobilized lipases was investigated in the presence of calixarene based polymers using different immobilization techniques. For this reason, Candida rugosa lipase was encapsulated in sol–gel matrices using alkoxysilane precursors and calix[n]arene based silica polymers as additives. The hydrolytic activities of encapsulated lipases were evaluated and compared with the free lipase and covalently immobilized lipases (CnP-L). These encapsulated lipases were also used in the kinetic resolution of the R/S-Naproxen methyl ester. The results indicated that the C6P encapsulated lipase has significantly higher conversion and enantioselectivity as compared to the free lipase; other encapsulated lipases and CnP-L. The optimal pH and temperature region of the C6P encapsulated lipase in the kinetic resolution of the R/S-naproxen methyl ester were 7.0 and 55?°C. Nevertheless, the encapsulated lipases have good stability, adaptability and reusability in comparison with the free enzyme.     

Immobilization of Candida antarctica Lipase B by Adsorption to Green Coconut Fiber

An agroindustrial residue, green coconut fiber, was evaluated as support for immobilization of Candida antarctica type B (CALB) lipase by physical adsorption. The influence of several parameters, such as contact time, amount of enzyme offered to immobilization, and pH of lipase solution was analyzed to select a suitable immobilization protocol. Kinetic constants of soluble and immobilized lipases were assayed. Thermal and operational stability of the immobilized enzyme, obtained after 2 h of contact between coconut fiber and enzyme solution, containing 40 U/ml in 25 mM sodium phosphate buffer pH 7, were determined. CALB immobilization by adsorption on coconut fiber promoted an increase in thermal stability at 50 and 60 °C, as half-lives (t _1/2) of the immobilized enzyme were, respectively, 2- and 92-fold higher than the ones for soluble enzyme. Furthermore, operational stabilities of methyl butyrate hydrolysis and butyl butyrate synthesis were evaluated. After the third cycle of methyl butyrate hydrolysis, it retained less than 50% of the initial activity, while Novozyme 435 retained more than 70% after the tenth cycle. However, in the synthesis of butyl butyrate, CALB immobilized on coconut fiber showed a good operational stability when compared to Novozyme 435, retaining 80% of its initial activity after the sixth cycle of reaction.     

Lipase from a Brazilian strain ofPenicillium citrinum

A lipases (glycerol ester hydrolases E. C. 3.1.1.3) from a brazilian strain ofPenicillium citrinum has been investigated. When the microorganism was cultured in the simple medium (1.0% olive oil and 0.5% yeast extract), using olive oil in as carbon source in the inocula, the enzyme extracted showed maximum activity (409 IU/mL). In addition, decrease of yeast extract concentration also reduces the lipase activity. Nevertheless, when yeast extract was replaced by ammonium sulfate, no activity was detected. Purification by precipitation with ammonium sulfate showed best activity in the 40–60% fraction. The optimum temperature for enzyme activity was found in the range of 34–37°C. However, after 30 min at 60°C, the enzyme was completely inactivated. The enzyme showed optimum at pH 8.0. The dried concentrated fraction (after dialysis and lyophilization) maintained its lipase activity at room temperature (28°C) for 8 mo. This result in lipase stability suggests an application of lipases fromP. citrinum in detergents and other products that require a high stability at room temperature.     

Enzymatic conversion of waste cooking oils into alternative fuel—Biodiesel

Production of biodiesel from pure oils through chemical conversion may not be applicable to waste oils/fats. Therefore, enzymatic conversion using immobilized lipase based on Rhizopus orzyae is considered in this article. This article studies this technological process, focusing on optimization of several process parameters, including the molar ratio of methanol to waste oils, biocatalyst load, and adding method, reaction temperature, and water content. The results indicate that methanol/oils ratio of 4, immobilized lipase/oils of 30 wt% and 40°C are suitable for waste oils under 1 atm. The irreversible inactivation of the lipase is presumed, and a stepwise addition of methanol to reduce inactivation of immobilized lipases is proposed. Under the optimum conditions the yield of methyl esters is around 88–90%.     

Lipase‐catalyzed ring‐opening polymerization of 6(S)‐methyl‐morpholine‐2,5‐dione

Lipase‐catalyzed ring‐opening bulk polymerizations of 6(S)‐methyl‐morpholine‐2,5‐dione (MMD) were investigated. Selected commercial lipases were screened as catalysts for MMD polymerization at 100 °C. Polymerizations catalyzed with 10 wt % porcine pancreatic lipase type II crude (PPL), lipase from Pseudomonas cepacia, and lipase type VII from Candida rugosa resulted in MMD conversions of about 75% in 3 days and in molecular weights ranging from 8200 to 12,100. Poly(6‐methyl‐morpholine‐2,5‐dione) [poly(MMD)] had a carboxylic acid group at one end and a hydroxyl group at the other end. However, lipase from Mucor javanicus showed lower catalytic activity for the polymerization. During the polymerization, racemization of the lactate residue took place. PPL was selected for further studies. The rate of polymerization increased with increasing PPL concentration under otherwise identical conditions. When the PPL concentration was 5 or 10 wt % with respect to MMD, a conversion of about 70% was reached after 6 days or 1 day, respectively, whereas for a PPL concentration of 1 wt %, the conversion was less than 20% even after 6 days. High concentrations of PPL (10 wt %) resulted in high number‐average molecular weights (<3 days); with a lower concentration of PPL, lower molecular weight poly(MMD) was obtained. The concentration of water was an important factor that controlled not only the conversion but also the molecular weight. With increasing water content, enhanced polymerization rates were achieved, whereas the molecular weight of poly(MMD) decreased. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3030–3039, 2005     

Inhibitory Effects of Tunisian Marine Algal Extracts on Digestive Lipases

The lipase inhibitory activity of ethanol extracts obtained from some marine algae collected on the Tunisian coast was evaluated. Caulerpa prolifera extract markedly reduced both dog gastric (DGL) and human pancreatic lipase (HPL) activities. Generally, the inhibition reached 100% after 40 to 60 min of incubation depending on lipase types and on substrates used. Moreover, the inhibitory effect of C. prolifera extract on lipases appeared to be accelerated by adding bile salts, which likely modified the interface and allowed the inhibitory compound to inactivate the lipase. The separation of C. prolifera extract by thin-layer chromatography (TLC) resulted in eight fractions showing efficient inhibition rate against DGL, compared to the crude extract. In the case of HPL, TLC fractionation reduced the inhibitory rates, suggesting that the effect of algal extract on lipases may be caused by a synergetic action of several compounds within the extract. High-performance liquid chromatograph separation resulted in isolation of a major compound displaying high inhibition capacity of HPL activity. Caulerpa prolifera extract may therefore be useful in developing antiobesity drugs.     

Collagen-Immobilized Lipases Show Good Activity and Reusability for Butyl Butyrate Synthesis

Candida rugosa lipases were immobilized onto collagen fibers through glutaraldehyde cross-linking method. The immobilization process has been optimized. Under the optimal immobilization conditions, the activity of the collagen-immobilized lipase reached 340 U/g. The activity was recovered of 28.3 % by immobilization. The operational stability of the obtained collagen-immobilized lipase for hydrolysis of olive oil emulsion was determined. The collagen-immobilized lipase showed good tolerance to temperature and pH variations in comparison to free lipase. The collagen-immobilized lipase was also applied as biocatalyst for synthesis of butyl butyrate from butyric acid and 1-butanol in n-hexane. The conversion yield was 94 % at the optimal conditions. Of its initial activity, 64 % was retained after 5 cycles for synthesizing butyl butyrate in n-hexane.     

In Silico and Experimental Characterization of Chimeric Bacillus thermocatenulatus Lipase with the Complete Conserved Pentapeptide of Candida rugosa Lipase

Lipases are one of the highest value commercial enzymes as they have broad applications in detergent, food, pharmaceutical, and dairy industries. To provide chimeric Bacillus thermocatenulatus lipase (BTL2), the completely conserved pentapeptide (¹¹²Ala-His-Ser-Gln-Gly¹¹⁶) was replaced with similar sequences (²⁰⁷Gly-Glu-Ser-Ala-Gly²¹¹) of Candida rugosa lipase (CLR) at the nucleophilic elbow region. For this purpose, three mutations including A112G, H113E, and Q115A were inserted in the conserved pentapeptide sequence of btl2 gene. Based on the crystal structures of 2W22, the best structure of opened form of the chimeric lipases were garnered using the MODELLER v9.10 software. The native and chimeric lipases were docked to a set of ligands, and a trial version of Molegro Virtual Docker (MVD) software was used to obtain the energy values. Docking results confirmed chimeric lipase to be better than the native lipase. Following the in silico study, cloning experiments were conducted and expression of native and chimeric btl2 gene in Pichia pastoris was performed. The native and chimeric lipases were purified, and the effect of these mutations on characteristics of chimeric lipase studied and then compared with those of native lipase. Chimeric lipase exhibited 1.6-fold higher activity than the native lipase at 55 °C. The highest percentage of both lipases activity was observed at 60 °C and pH of 8.0. The ion Ca²⁺ slightly inhibited the activity of both lipases, whereas the organic solvent enhanced the lipase stability of chimeric lipase as compared with the native lipase. According to the results, the presence of two glycine residues at the conserved pentapeptide region of this chimeric lipase (¹¹² Gly-Glu-Ser-Ala-Gly ¹¹⁶) may increase the flexibility of the nucleophilic elbow region and affect the enzyme activity level.     

Screening of Food Grade Lipases to be Used in Esterification and Interesterification Reactions of Industrial Interest

Seven food grade commercially available lipases were immobilized by covalent binding on polysiloxane–polyvinyl alcohol (POS-PVA) hybrid composite and screened to mediate reactions of industrial interest. The synthesis of butyl butyrate and the interesterification of tripalmitin with triolein were chosen as model reactions. The highest esterification activity (240.63 μM/g min) was achieved by Candida rugosa lipase, while the highest interesterification yield (31%, in 72 h) was achieved by lipase from Rhizopus oryzae, with the production of about 15 mM of the triglycerides C₅₀ and C₅₂. This lipase also showed a good performance in butyl butyrate synthesis, with an esterification activity of 171.14 μM/g min. The results demonstrated the feasibility of using lipases from C. rugosa for esterification and R. oryzae lipase for both esterification and interesterification reactions.     

华根霉全细胞脂肪酶催化合成生物柴油

比较了5种不同商品化脂肪酶和自制的华根霉CCTCCM201021全细胞脂肪酶(RCL)催化油脂合成生物柴油的转化效果,结果表明,RCL能有效应用于无溶剂体系催化合成生物柴油.在无溶剂体系中对该酶催化生物柴油的转酯化反应工艺进行优化,考察了甲醇用量、体系含水量、酶的添加量和反应温度对生物柴油收率的影响,使生物柴油最终收率大于86.0%.在有机溶剂体系中选择不同有机溶剂作为助溶剂进行转酯化反应,发现logP值在4.0～4.5的有机溶剂具有较好的转化效果.其中以正庚烷为助溶剂的转酯化反应具有最高的生物柴油收率86.7%.在无溶剂体系中RCL催化转化油酸和模拟高酸价油脂合成脂肪酸甲酯的研究表明,该酶具有很好的催化合成生物柴油的潜力.     

Assessment of Activities and Conformation of Lipases Treated with Sub- and Supercritical Carbon Dioxide

In order to illustrate the underlining mechanism of the effect of high pressure on lipases from different resources, the influence of compressed carbon dioxide treatment on the esterification activities and conformation of the three lipases Candida rugosa lipase (CRL), Pseudomonas fluorescens lipase, and Rhizopus oryzae lipase was investigated in the present work. The results showed that the lipases activities were significantly enhanced in most of high-pressure treatments, except the pressure had a negative effect on CRL activity in supercritical condition. Mild depressurization rate could remain the lipase’s activity by protecting its rigid structure under supercritical fluid. Conformational analysis by Fourier transform-infrared spectrometry and fluorescence emission spectra revealed that the variances of lipase activity after high-pressure treatment were correlated with the changes of its α-helix content and fluorescence intensity. Additionally, transesterification catalyzed by three lipases in supercritical carbon dioxide were conducted, and 87.2 % biodiesel conversion was obtained by CRL after 3 h, resulting in a great reduction of reaction time.     

Concentration,Partial Characterization,and Immobilization of Lipase Extract from <Emphasis Type="Italic">P. brevicompactum</Emphasis> by Solid-State Fermentation of Babassu Cake and Castor Bean Cake

One relevant limitation hindering the industrial application of microbial lipases has been attributed to their production cost, which is determined by the production yield, enzyme stability among other. The objective of this work was to evaluate the concentration and immobilization of lipase extracts from Penicillium brevicompactum obtained by solid-state fermentation of babassu cake and castor bean cake. The precipitation with ammonium sulfate 60% of saturation of crude extract obtained with babassu cake as raw material showed an enhancement in hydrolytic and esterification activities from 31.82 to 227.57 U/g and from 170.92 to 207.40 U/g, respectively. Concentrated lipase extracts showed preference to medium-chain triglycerides and fatty acids. It is shown that the enzyme activity is maintained during storage at low temperatures (4 and −10°C) for up to 30 days. Higher esterification activities were achieved when the lipase extract was immobilized in sodium alginate and activated coal.     

Enhancement of the Activity and Enantioselectivity of Lipase by Sol–Gel Encapsulation Immobilization onto β-cyclodextrin-Based Polymer

Candida rugosa lipase was encapsulated within a chemically inert sol–gel support prepared by polycondensation with tetraethoxysilane and octyltriethoxysilane in the presence of β-cyclodextrin-based polymer. The catalytic activity of the encapsulated lipases was evaluated both in the hydrolysis of p-nitrophenylpalmitate and the enantioselective hydrolysis of racemic Naproxen methyl ester. It has been observed that the percent activity yield of the encapsulated lipase was 65 U/g, which is 7.5 times higher than that of the covalently immobilized lipase. The β-cyclodextrin-based encapsulated lipases had higher conversion and enantioselectivity compared with covalently immobilized lipase. The study confirms an excellent enantioselectivity (E >300) for the encapsulated lipase with an enantiomeric excess value of 98% for S-naproxen.