Promoting non-transition metal alkylation with organic halides in the presence of binary systems based on an organometallic compound and a transition metal compound: IX. Alkylation of aluminum and concluding remarks

Study of aluminum powder alkylation with ethyl bromide in the presence of ethylaluminum sesquibromide and copper(I) iodide has revealed that binary systems based on an organometallic compound and a transition metal compound are efficient promotors of direct synthesis of organoaluminum compounds as well. Major conclusions drawn in a series of studies on non-transition metals (Zn, Cd, and Al) alkylation with organic halides in the presence of the binary systems are summarized.     

Promoting of non-transition metal alkylation with organyl halides in the presence of binary systems based on an organometallic compound and a transition metal compound: I. Hypothetical stepwise scheme and verification of the system efficiency

A hypothetical scheme has been proposed for the alkylation of non-transition metals with organyl halides in the presence of binary systems consisting of an organometallic compound and a transition metal compound. The scheme implies catalysis by transition metal atoms, small clusters, and subhalides adsorbed on the surface of metal to be alkylated. These particles are formed during the process as a result of interaction between the binary system components. The alkylation of commercial zinc powder with ethyl bromide has been used as a model reaction to demonstrate that the binary system ethylzinc bromide-copper(I) iodide is superior in its efficiency and experimental simplicity to all other examined methods for stimulation of the alkylation of elements with organyl halides yielding organometallic compounds.     

Promoting non-transition metal alkylation with organic halides in the presence of binary systems based on an organometallic compound and a transition metal compound: VI. Effect of various additives on the rate of the steady-state process

The effect of various additives such as transition and non-transition metal oxides, hydroxides, and salts on the rate of steady-state alkylation of commercial zinc powder with ethyl bromide in the presence of ethylzinc bromide–copper(I) iodide binary system has been studied. Most of the examined compounds either do not affect the reaction rate or reduce it. Only addition of zinc(II) bromide, zinc(II) hydroxide, and water appreciably accelerates the process. Mechanism of action of the additives is discussed.     

Room-temperature Negishi cross-coupling of unactivated alkyl bromides with alkyl organozinc reagents utilizing a Pd/N-heterocyclic carbene catalyst

A high-yielding cross-coupling reaction of unactivated alkyl bromides possessing beta-hydrogens with alkylzinc halides utilizing a Pd/N-heterocyclic carbene (NHC) catalyst at room temperature is described. A variety of Pd sources, Pd2(dba)3, Pd(OAc)2, or PdBr2, with the commercially available ligand precursor 1,3-bis(2,6-diisopropylphenyl)imidazolium chloride (IPr.HCl) successfully coupled 1-bromo-3-phenylpropane with n-butylzinc bromide in THF/NMP. An investigation of different NHC precursors showed that the bulky 2,6-diisopropylphenyl moiety was necessary to achieve high coupling yields (75-85%). The corresponding ethyl analogue was moderately active (11%). A range of unsymmetrical NHC precursors were prepared and evaluated. The ligand precursor containing one 2,6-diisopropylphenyl and one 2,6-diethylphenyl afforded the coupling product in 47% yield, clearly suggesting a direct relationship between the steric topography created by the flanking N-substituents and catalyst activity. Under optimal conditions, a number of alkyl bromides and alkylzinc halides possessing common functional groups (amide, nitrile, ester, acetal, and alkyne) were effectively coupled (61-92%). It is noteworthy that beta-substituted alkyl bromides and alkylzinc halides successfully underwent cross-coupling. Also, under these conditions alkyl chlorides were unaffected.     

Promoting non-transition metal alkylation with organic halides in the presence of binary systems based on an organometallic compound and a transition metal compound: VIII. Selectivity of the binary systems action

Selectivity of action of binary systems based on an organometallic compound and a transition metal compound in a direct synthesis of organometallic compounds via alkylation of metals with organic halides has been considered. Study of the side reactions in the course of zinc and cadmium powders alkylation (gaseous hydrocarbons evolution) taken as an example has demonstrated that the increase in activity of the binary system components is accompanied by decrease in its selectivity. The intensity of the side reactions is steeply increased above certain temperature determined by the nature of the reactants and components of the binary system. The surface of the alkylated metal containing adatoms and small clusters of the transition metal promotes the side processes.     

Promoting nontransition metal alkylation with organic halides in the presence of binary systems based on an organometallic compound and a transition metal compound: V. Effect of the nature of the transition metal compound in the binary system on the rate of a steady-state process

The example of alkylation of commercial zinc and cadmium powders with organic halides in the presence of binary systems comprising an organometallic and a transition metal compounds was used to show that the nature of the transition metal compound in the binary system strongly affects the rate of a steady-state process. Therewith, the significant factors are both the nature of the transition metal and the ligand composition. It was found that the activity of the binary systems correlates with the activity of the transition metal compound in the transmetalation reaction with the organometallic component of the binary system (reduction of the transition metal compound).     

Intelligent networks based on poly(oxyethylene)

Films of PEO and PEO blends were efficiently crosslinked by exposure to ultraviolet radiation with high-pressure mercury lamp. Photochemical crosslinking proceeded in the presence of photoinitiator such as benzophenone or pentaerythritol triacrylate. PEO networks obtained by UV irradiation in the presence of potassium salts (thiocyanate, perchlorate and triflate) as templates showed enhanced cation binding ability for Li⁺ and Na⁺ cations. Cationic networks were prepared from crosslinked PEO modified with ethyl methacrylate dimethyl dodecyl ammonium bromide. Stimuli-sensitive hydrogels (pH and temperature) were prepared from combinations of PEO and poly-N-isopropyl acryl amide, polyvinyl methyl ether, polyvinyl acetate and poly-2-vinyl pyridine subjected to UV irradiation.     

Negishi cross-coupling of secondary alkylzinc halides with aryl/heteroaryl halides using Pd-PEPPSI-IPent

Pd-PEPPSI-IPent has proven to be an excellent catalyst for the Negishi cross-coupling reaction of secondary alkylzinc reagents with a wide variety of aryl/heteroaryl halides. Importantly, β-hydride elimination/migratory insertion of the organometallic leading to the production of isomeric coupling products has been significantly reduced using the highly-hindered Ipent ligand.     

Alkylative Carboxylation of Ynamides and Allenamides with Functionalized Alkylzinc Halides and Carbon Dioxide by a Copper Catalyst

The alkylative carboxylation of ynamides and allenamides with CO₂ and alkylzinc halides catalyzed by a copper catalyst was developed. A variety of alkylzinc halides bearing functional groups were used for this transformation to afford α,β-unsaturated carboxylic acids, which contain the α,β-dehydroamino acid skeleton, introducing the corresponding alkyl group and CO₂ across the carbon–carbon triple or double bond. This alkylative carboxylation formally consists of Cu-catalyzed carbozincation of ynamides or allenamides with alkylzinc halides and the subsequent nucleophilic carboxylation of the resulting alkenylzinc species with CO₂. This protocol would be a useful method for the synthesis of α,β-dehydroamino acid derivatives possessing a functionalized alkyl group due to the high regio- and stereoselectivity, simple one-pot procedure as well as the use of CO₂ as a starting material.     

Further studies on the ultraviolet graft copolymerization of maleimide by vapor-phase method

Graft copolymerization of maleimide onto polyethylene and ethyl cellulose films by using its sublimation vapor was carried out under ultraviolet irradiation in the presence or absence of air; the effect of air or additives on the grafting reaction and on the nature of the grafted films was investigated. The extent of grafting gradually approached a fixed value, in spite of the continuous ultraviolet irradiation. Air retarded the grafting reaction but did not suppress the reaction nor alter the final extent of grafting. Benzoquinone showed no inhibiting effect on the grafting. The grafted polymaleimide was found to be amorphous, even though ultraviolet irradiation produces a highly crystalline homopolymer in the solid phase as well as in the liquid phase. The results were discussed in comparison with those of the vapor-phase grafting under γ-ray irradiation; the reaction is attributed to the vapor–crystal equilibrium of monomer and to the formation of short-chain crosslinks.     

A convenient one-pot Negishi coupling of amino-heteroaryl chlorides and alkyl bromides

A simple Ni-catalysed cross-coupling protocol for amino-heteroaryl chlorides with alkylzinc reagents has been developed. The alkylzinc reagents can be commercially available dialkylzincs or alkylzinc halides, or can be conveniently generated in situ from diethylzinc and primary alkyl bromides in the presence of the same inexpensive Ni catalyst used to effect the subsequent coupling reaction.     

A view and a review of the melting of alkali metal halide crystals

Summary A representational model, proposed to account for the physical changes that accompany the melting of alkali halides, was described in Part 1 [1]. The liquid is portrayed as undergoing continual dynamic structural reorganization of its constituent ions between individual small domains, zones of various regular, crystal-type arrays. These alternative arrangements are stabilized by the enthalpy of melting, which, in liquids, relaxes the restriction for solids that only the single, most stable, crystal structure can be present. The dynamic character of the melt accounts for its fluid character and the loss of long-range order [1, 2]. This model is extended here to consider the phase diagrams of binary, common ion, alkali halide mixtures comprehensively reviewed in [3]. Factors determining whether each of these yields a eutectic, or a solid solution, on cooling are discussed and several trends in the 70-phase diagrams are identified. Eutectic formation, involving maintenance of the liquid state below the melting points of the pure components, is ascribed to the participation, in an extended dynamic equilibrium, of additional domains having the regular structures characteristic of double salts. The known crystalline double binary halides [3], Li/Cs or Rb/F, Cl, Br or I, melt at temperatures well below those of the simpler pure component salts. It is concluded that the set/liq model for melting, proposed in [1, 2], accounts for some important properties of the phase diagrams presented in [3].     

Nickel-Catalyzed Preparations of Functionalized Organozincs

The reaction of primary alkyl bromides or chlorides with diethylzinc in the presence of Ni(acac)(2) (5 mol %) furnishes the corresponding alkylzinc halides (X = Br, Cl) via a halogen-zinc exchange reaction. The treatment of terminal alkenes with diethylzinc (neat, 25-60 degrees C) in the presence of Ni(acac)(2) as a catalyst (1-5 mol %) and 1,5-cyclooctadiene (COD) affords the corresponding dialkylzincs via a hydrozincation reaction. Whereas the conversion for simple alkenes bearing a remote functionality reaches 40 to 63%, the hydrozincation of allylic, homoallylic alcohols and allylic amines proceeds very efficiently (85-95% conversion). All the zinc organometallics obtained react with various electrophiles (allylic halides, enones, acid chlorides, alkynyl halides, ethyl propiolate) after transmetalation with CuCN.2LiCl. In the presence of the chiral catalyst 12, the dialkylzincs prepared add to aldehydes with high enantioselectivity.     

Cobalt-catalyzed cross-coupling reactions

In the last few years, we and other groups have demonstrated that economical cobalt salts can advantageously replace expensive and toxic catalysts for cross coupling reactions. These cobalt-catalyzed reactions have considerably extended the range of functionalized compounds. A variety of sensitive functional groups can be tolerated in these coupling reactions and various organic compounds RX could be involved (R = alkyl, alkynyl, aryl, allyl and X = halides: F, Cl, Br, I and even triflates). Here, we describe our contributions in this area for the preparation of a broad range of functionalized compounds from organometallic species or by direct cross-coupling.     

Microwave-assisted synthesis of primary amine HX salts from halides and 7 M ammonia in methanol

The atom economical synthesis of hydrogen halide salts of primary amines, directly from the corresponding halides, avoids the production of significant amounts of secondary amine side products, and requires only evaporation of the solvent to access the products in yields generally greater than 90%. The procedure uses microwave irradiation in 7 M ammonia in methanol (Aldrich) at 130 °C from 0.5 to 2.5 h and works on a variety of alkyl halides, as well as mesylates and tosylates. Benzylamines are obtained from benzyl halides without significant amounts of the secondary amine side products that result without microwave heating. Direct isolation of even highly volatile primary amines as their hydrogen halide salts makes the method ideal for use in parallel synthesis.     

Enantiotropic nematic phases of quaternary ammonium halide salts based on trioctadecylamine

The neat phases of a series of quaternary ammonium halides based on trioctadecylamine have been investigated by optical microscopy, differential scanning calorimetry, and H NMR spectroscopy. Phase behaviour depends primarily on the structure of the fourth substituent on nitrogen and the thermal history of the samples. For instance, the iodide salts with methyl, ethyl, or propyl as the fourth substituent form enantiotropic nematic phases, while those with a proton or a longer alkyl substituent exhibit complex phase behaviour that does not include a liquid crystalline phase. Possible reasons are advanced for the unprecedented formation of nematic phases.     

Isomerization of cyclooctatetraene oxide in the reaction with organometallic reagents : Possible involvement of homotropylium cation intermediate

The reaction of cyclooctatetraene oxide (1) with several organometallic reagents and metal salts were investigated with reference to skeletal change of the ring. LAH causes ring cleavage to yield octa-2,4,6-trienal along with the formation of cycloocta-3,5-dienol. Ethylmagnesium bromide and triethylaluminum afford ethyl(cyclohepta-2,4,6-trienyl)methanol in good yields, but the addition of HMPA in the Grignard reaction results in reduction of the reactivity and formation of the isomerized cyclic trienone. A similar medium effect by HMPA or solvent is found in the reaction of 1 with ethyllithium which affords 5-ethylcycloocta-2,6-dienone (70·2%) in ether, and also in the metal salts (MgBr₂, LiBr, and LiClO₄) induced isomerization giving cycloheptatrienylcarboxyaldehydes and phenylacetaldehyde. The diverse nature of the products in the reactions is accounted for by the formation of homotropylium cation intermediates.     

Halomethyl—metal compounds : LXXII. The preparation of α-halocyclopropyl derivatives of lithium and their application in the synthesis of α-halocyclopropyl compounds of silicon,germanium, tin,lead, and mercury. A novel isomerization of syn-7-bromo-anti-7-lithionorcarane to the anti-7-bromo-syn-7-lithio isomer

A number of α-bromocyclopropyllithium reagents have been prepared at low temperature (?90° to ?100°) in THF or THF/Et₂O medium by reaction of n-butyllithium with the respective gem-dibromocyclopropane. Reactions of these new lithium reagents with concentrated HCl, trimethylchlorosilane, dimethyldichlorosilane, trimethyltin chloride, dimethyltin dichloride, dimethyldichlorogermane, trimethyllead bromide, mercuric chloride and some other organometallic halides are described. A novel isomerization of syn-7-bromo-anti-7-lithionorcarane to anti-7-bromo-syn-7-lithionorcarane, induced by the presence of a slight excess of 7,7-dibromonorcarane, is described.     

Synthesis of New Plant Growth Regulators,Isomeric 1-(Dimethyloctyl)- and 1-Alkylpiperidinium and -morpholinium Halides by Telomerization of Isoprene with Secondary Amines

The known plant growth regulator, Al'den [1-(3,7-dimethyloctyl)-1-allylpiperidinium bromide], and also 1-(3,7-dimethyloctyl)-1-methylpiperidinium iodide were synthesized by treatment with allyl bromide and methyl iodide, respectively, of exhaustively hydrogenated 1-nerylpiperidine which was obtained by anionic telomerization of isoprene with piperidine. Various quaternary ammonium salts having a terpene sub- stituent with unnatural dimethyloctane skeleton, which effectively stimulate florification of Aster Chinensis L., were prepared by the action of alkyl halides on telomerization products derived from isoprene and piperidine or morpholine in the presence of palladium complexes.