Propanal hydroamination with <Emphasis Type="Italic">p</Emphasis>-aminobenzoic acid

The propanal hydroamination was studied. It was found that the reaction in ethanol proceeded faster than in 2-propanol. By ¹H and ¹³C NMR method the existence was proved of a tautomeric equilibrium in ethanol solution between 4-(propylideneamino)benzoic acid and its enamine form, 4-(prop-1-en-1-ylamino)benzoic acid.     

Biomimetic synthesis of the arachidic acid/Ag<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>Cd<Subscript><Emphasis Type="Italic">y</Emphasis></Subscript>S nanocomposite films

Ag _x Cd _y S nanoparticles were obtained in arachidic acid (AA) monolayer containing Ag⁺ and Cd²⁺ under H₂S flow. The AA/Ag _x Cd _y S monolayers were deposited onto solid substrate to prepare LB films. The UV-vis spectrum showed that the LB film exhibited notable quantum-size effect. The small-angle X-ray diffraction revealed periodic structure of the LB films. The molar ratio of Ag to Cd in AA/Ag _x Cd _y S film was ca. 1 : 5 as measured by the XPS. TEM and FTIR spectroscopy showed that the head-groups of arachidic acid molecules controlled formation of Ag _x Cd _y S nanoparticles in the monolayer.     

CO<Subscript>2</Subscript> Biofixation and Growth Kinetics of <Emphasis Type="Italic">Chlorella vulgaris</Emphasis> and <Emphasis Type="Italic">Nannochloropsis gaditana</Emphasis>

CO₂ biofixation was investigated using tubular bioreactors (15 and 1.5 l) either in the presence of green algae Chlorella vulgaris or Nannochloropsis gaditana. The cultivation was carried out in the following conditions: temperature of 25 °C, inlet-CO₂ of 4 and 8 vol%, and artificial light enhancing photosynthesis. Higher biofixation were observed in 8 vol% CO₂ concentration for both microalgae cultures than in 4 vol%. Characteristic process parameters such as productivity, CO₂ fixation, and kinetic rate coefficient were determined and discussed. Simplified and advanced methods for determination of CO₂ fixation were compared. In a simplified method, it is assumed that 1 kg of produced biomass equals 1.88 kg recycled CO₂. Advance method is based on empirical results of the present study (formula with carbon content in biomass). It was observed that application of the simplified method can generate large errors, especially if the biomass contains a relatively low amount of carbon. N. gaditana is the recommended species for CO₂ removal due to a high biofixation rate—more than 1.7 g/l/day. On day 10 of cultivation, the cell concentration was more than 1.7?×?10⁷ cells/ml. In the case of C. vulgaris, the maximal biofixation rate and cell concentration did not exceed 1.4 g/l/day and 1.3?×?10⁷ cells/ml, respectively.     

Reactions of 1-nitrocyclohexene with <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-binucleophiles

A modification of 1-nitrocyclohexene synthesis is proposed; its reaction with phenylhydrazine and benzoic acid hydrazide is shown to afford monoadducts, and with hydrazine hydrate, bisaduct. With diphenylguanidine occurs heterocyclization to 1-phenyl-2-N-phenylamino-4,5,6,7-tetrahydrobenzimidazole, whose structure is confirmed by the X-ray diffraction data. The analysis performed for this compound of the electron density distribution function in the crystal made it possible to estimate the charge distribution, π-electrons delocalization nature, and the role of N-H…N, C-H…H-C and C-H…C interactions in the formation of the crystal packing.     

Binuclear nickel(<Emphasis Type="SmallCaps">II</Emphasis>) complexes with 3,5-di-<Emphasis Type="Italic">tert</Emphasis>-butylbenzoate and 3,5-di-<Emphasis Type="Italic">tert</Emphasis>-butyl-4-hydroxybenzoate anions and 2,3-lutidine: the synthesis,structure, and magnetic properties

Two novel binuclear nickel(II) complexes [Ni₂(O₂CR)₄(2,3-lut)₂] (O₂CR is anion of 3,5-di(tert-butyl)benzoic acid (bzo, 1) and 4-hydroxy-3,5-di(tert-butyl)benzoic acid (hbzo, 2); 2,3-lut is 2,3-lutidine) with four carboxylate bridges were synthesized. The structure of complex 1 was determined by X-ray diffraction. Both dimers 1 and 2 were characterized by elemental analysis, IR spectroscopy, and magnetic measurements. The presence of the α-substituent in the apical lutidine ligand leads to a distortion of the geometry of the metal carboxylate core in complex 1 as a result of short steric contacts Me(Lut)…O(OOCR) (3.134(7) Å). This is apparently responsible for a considerable decrease in the exchange parameters of complexes 1 and 2 (J =–30.0 and–23.6 cm^–1, respectively) as compared to known analogues. Density functional calculations of the structure and magnetic properties of 1 and 2 were carried out by the UB3LYP/6-31G(d,p) method.     

Spatial structure and stability of Mo<Subscript><Emphasis Type="Italic">n</Emphasis></Subscript>Si<Subscript><Emphasis Type="Italic">m</Emphasis></Subscript> nanoparticles

By means of the ab initio DMol³ method Mo _n Si _m nanoparticles and fragments of Mo₃Si and MoSi₂ crystal lattices are theoretically modeled. For both crystals a few neutral Mo₄Si₆ and Mo₆Si₆ fragments of different shapes and symmetry are considered. In each case, after cluster separation its geometry is optimized, as a result of which the geometric structure noticeably changes and its stability increases. In order to theoretically search for the spatial configurations of Mo₄Si₆ and Mo₆Si₆ nanoparticle, two approaches are used: 1) in the most stable Fe₄C₆ and Fe₆C₆ isomers found previously, iron and carbon atoms are replaced by molybdenum and silicon respectively and then the geometry is optimized to obtain new equilibrium distances and angles; 2) the search for main Mo₄Si₆ and Mo₆Si₆ configurations is performed using the binominal scheme, starting from Mo₂, MoSi, and Si₂ dimers. The nanoparticle structures are found to contain metal atom chains and isolated pairs and triples of silicon atoms. In most cases, the nanoparticle stability proves to be higher than that of the crystal clusters.     

Compositions and structures of nanoparticles of trigonal symmetry <Emphasis Type="Italic">D</Emphasis><Subscript>3<Emphasis Type="Italic">d</Emphasis></Subscript>: Nanotubes

A method has been developed for the determination of the structure and number of atoms in the shells of nanoparticles as a function of the arrangement of atoms at the symmetry elements of a symmetry group. The formulas for calculation of the number of particles of symmetry D _3d have been reported. It has been shown that the number of atoms in trigonal shells is determined by three structurally invariant numbers and the quantum number of the group order n. All possible nanostructures of symmetry D _3d have been classified: C_{θ + 6z} , z = 0, 1, 2, ..., where the basic shells are C_θ = C₆, C₈, and C₁₄. A sum rule has been obtained for the coordination numbers of the shell sites located on symmetry axes. Trigonal nanoparticles are parent ones for obtaining (3,0), (6,0), and (9,0) nanotubes of trigonal type. The general formulas of these nanotubes with icosahedral, dodecahedral, and cubic caps are N_{8 + 12p} , N_{20 + 24p} , and N_{60 + 36p} (p = 1, 2, ...), respectively. The graphical constructions of all classes of trigonal nanoparticles and nanotubes are reported.     

Molecular properties of the copolymers of <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-diallyl-<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-dimethylammonium chloride and maleic acid

The hydrodynamic and conformational properties of molecules of poly(N,N-diallyl-N,N-dimethylammonium chloride) and N,N-diallyl-N,N-dimethylammonium chloride-maleic acid copolymers of different compositions in solutions with various ionic-strength and pH values, as well as of the polyelectrolyte complex based on the copolymer with dodecyl sulfate anions in chloroform, are studied. For poly(N,N-diallyl-N,N-dimethylammonium chloride) molecules in a 1 M NaCl solution, the Kuhn segment length and the hydrodynamic diameter of the chain are estimated as A = 3.9 nm and d = 0.48 nm, respectively. In acidic solutions with pH 3.5, the copolymers demonstrate behavior typical for polyelectrolytes. In an alkaline solution with pH 13, when 1 M NaCl is added to the solution of the copolymer containing 29 mol % maleic acid units, there is an antipolyelectrolyte effect that manifests itself as an increase in the intrinsic viscosity of the copolymer and in the hydrodynamic radius of its molecules. It is found that an increase in the fraction of maleic acid units in the copolymer from 12 to 42 mol % brings about a reduction in the equilibrium rigidity of its macromolecules from 4.1 to 2.2 nm. The equilibrium rigidity of polyelectrolyte-complex molecules is higher than that of initial copolymer molecules owing to steric interactions arising between the aliphatic chains of dodecyl sulfate anions. In an electric field, the molecules of the complex are oriented owing to the induced dipole moment resulting from the displacement of dodecyl sulfate anions along the chain contour.     

Reactions of <Emphasis Type="Italic">N</Emphasis>-acetyl- and <Emphasis Type="Italic">N</Emphasis>-ethoxycarbonyl-2-(1-cycloalken-1-yl)anilines with <Emphasis Type="Italic">meta</Emphasis>-cloroperbenzoic acid

Reaction of N-ethoxycarbonyl-2-(1-cycloalken-1-yl)anilines with meta-cloroperbenzoic acid leads to the corresponding 2-[1-o-(3-chlorobenzoyl)-2-hydroxycyclopent-1-yl]anilines. 5-(2-Acetylaminophenyl)-5-oxopentanic or 6-oxohexanic acids are formed as main products in the reaction of N-acetyl-2-(1-cycloalken-1-yl)anilines with m-chloroperbenzoic acid in CH₂Cl₂. N-Acetyl-2-(1-cyclopenten-1-yl)-3,6-dimethylaniline is an exception in this series since its reaction stops at the stage of epoxide formation.     

Electrodeposition of Fe<Subscript> <Emphasis Type="Italic">x</Emphasis> </Subscript>Se<Subscript> <Emphasis Type="Italic">y</Emphasis> </Subscript> films from acidic solutions

Iron selenide (Fe_xSe_y) thin films were electrodeposited on a glassy carbon electrode (GCE) surface under constant potential and pulse potential modes. The deposition mechanism was investigated using cyclic voltammetry. Electrochemical processes at room temperature are accompanied by adsorption of selenium on the electrode surface and complicated by chemical reactions in the solution bulk. Several approaches to control the film stoichiometry were applied: varying of electrodeposition potential; the use of elevated temperatures (60–80°C) to decrease the electrode passivation and electrodissolution of interfering elements under pulse mode. The composition of Fe_xSe_y thin films was analyzed using an energy dispersive X-rays (EDX) analysis.     

Halogenophilic and classical <Emphasis Type="Italic">Ad</Emphasis><Subscript><Emphasis Type="Italic">N</Emphasis></Subscript><Emphasis Type="Italic">E</Emphasis> mechanisms in nucleophilic vinylic substitution reactions involving the anions of transition metal carbonyls

The mechanism of the reaction of carbonylate anions ([M(CO) _n L]^–) with highly activated vinyl halides (Hal = Cl, Br, I) was investigated by the method of “anion traps” – the effect of proton donors on the composition of the reaction products. It was demonstrated that the reactions with PhCHal=C(Z)₂ (Hal = Br, I;Z=CN, CO₂Et) and PhCN=CClI take place through initial attack by the carbonylate at the halogen atom, the reactions with PhCCl=C(CO₂Et)₂ and PhCOCH=CHHal (Hal = Cl, I) take place through attack by the carbonylate at the π bond (Ad_NE mechanism), and in the case of E-and Z-PhCN=CHI the two mechanisms operate concurrently. The main laws determining the reaction mechanisms are analyzed.     

Synthesis of propylene-ethylene copolymers in liquid propylene using <Emphasis Type="Italic">ansa</Emphasis>-metallocenes of the <Emphasis Type="Italic">C</Emphasis><Subscript>1</Subscript> symmetry

The copolymerization of ethylene with propylene in the liquid propylene initiated by ansa-metallocenes of the C ₁ symmetry, rac-[1-(9-η⁵-fluorenyl)-2-(5,6-cyclopenta-2-methyl-1-η⁵-indenyl)ethane]zirconium dichloride and rac-[1-(9-η⁵-fluorenyl)-2-(5,6-cyclopenta-2-methyl-1-η⁵-indenyl)ethane]hafnium dichloride, activated by methylaluminoxane has been studied. Triisobutylaluminum has been used as a cocatalyst. The propylene-ethylene copolymers thus prepared contain 5–60 mol % ethylene units. The reactivity ratios have been measured. In the case of the zirconocene-based catalyst, the molecular mass of the copolymers decreases with an increase in the content of ethylene units. The reverse situation is observed in the case of the hafnocene-based catalytic system. The copolymers are characterized by the low T _g values (down to ?45°C). Incorporation of a small amount of ethylene units (5 mol %) results in a rise in the elastomeric behavior of the polymers.     

Kinetics of Na|CF<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript> and Li|CF<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript> systems

Properties of CF _x /Li and CF _x /Na cells were examined while using galvanostatic charging/discharging, electrochemical impedance spectroscopy and scanning electron microscopy (SEM). The capacity during the first cycle was as high as ca. 1000 mAh g^?1. Such an electrode is suitable for primary CF _x /Li and CF _x /Na batteries. SEM images of CF _x cathode showed that during discharging it was transformed into amorphous carbon and LiF or NaF crystals (of diameter of ca. 5–20 μm). These systems (C?+?LiF or C?+?NaF) cannot be reversibly converted back into CF _x /Li or CF _x /Na, respectively. Exchange current densities are between 10^?7 Acm^?2 and 10^?9 Acm^?2 when working with LiPF₆ and NaPF₆ electrolytes (1.12?×?10^?7 Acm^?2 and 6.82?×?10^?9 Acm^?2, respectively). Those values are low and indicate that the charge transfer process may be the rate-determining step. Activation energies for the charge transfer process were 57 and 72 kJ mol^?1 for CF _x /LiPF₆ and CF _x /NaPF₆ systems, respectively. Higher activation energy barrier for the CF/Na⁺?+?e^??→?C?+?NaF reaction results in lower observed exchange current density in comparison to the system with lithium ions.     

Splitting of the <Emphasis Type="Italic">d</Emphasis><Superscript><Emphasis Type="Italic">N</Emphasis></Superscript> atomic states in icosahedral 3<Emphasis Type="Italic">d</Emphasis> metal endofullerenes M@C<Subscript>60</Subscript>

Group-theoretical and quantum-chemical investigations of the spectrum of low-lying excited states have been performed by the ROHF and FCI-RAS (Full CI in Restricted Active Space) methods for 3d metal endofullerenes (MEFs) M@C₆₀ (M =Mn, Cr, and Fe) in different charged states. The major purpose of this study is quantum-chemical verification of the anomalous (“non-Bethe’s”) character of splitting of the d ^N atomic states in an electrostatic field with icosahedral symmetry, predicted previously within the theory of integral invariants theory. The interrelation between the integral invariants theory and the quantumchemical methods applied in this work is considered in detail. Our calculations suggest that the d ^N atomic states in the icosahedral field generated by fullerene C60 (I _h ) on a metal atom (ion) remain non-split for different charged states of the metal and C₆₀. Reasons for this phenomenon and other possible approaches to verification of the prediction are discussed. It is demonstrated that the d ^N states of the encapsulated metal are split in icosahedral 3d MEFs only under very strong compression of these structures.     

Evaluation of the <Emphasis Type="Italic">Q</Emphasis><Subscript><Emphasis Type="Italic">y</Emphasis></Subscript> absorption band maximum in a light-harvesting complex of the bacterial photosynthetic center <Emphasis Type="Italic">Thermochromatium tepidum</Emphasis>

Excitation energies of the bacteriochlorophyll (BChl) chromophores embedded in the photosynthetic light-harvesting complex of the purple bacterium Thermochromatium tepidum are computed using the time-dependent density functional theory based upon the fragmental molecular orbital (FMO-TDDFT) method. The results are correlated with the empirically based estimates of the Q _y absorption maximum, as well as with the observed large red shift induced by the binding of calcium.     

Compositions and structures of nanoparticles of pentagonal axial symmetry <Emphasis Type="Italic">D</Emphasis><Subscript>5<Emphasis Type="Italic">d</Emphasis></Subscript>: Nanotubes

The method of determination of the structure and the number of atoms in the shells of nanoparticles as a function of the arrangement of atoms at the symmetry elements of a symmetry group has been developed. The formulas for the calculation of the number of particles with symmetry group D _5d are reported. The number of particles in these shells is determined by three structurally invariant numbers and the “quantum number” of the group order n. The classification of all possible nanostructures with symmetry group D _5d is given: C _θ+10z , z = 0, 1, 2, …, where the basic shells are C _θ = C ₂, C ₁₀, C ₁₂. The sum rule has been obtained for the coordination numbers of shell sites located at symmetry axes. Pentagonal axial nanoparticles are shown to be the initial shells for obtaining (5,5) and (10,10) armchair nanotubes or (5,0) and (10,0) zigzag nanotubes. The general formula of these nanotubes closed with icosahedral and dodecahedral caps is N _20+10p , N _60+10p (p = 1, 2, …). The graphical constructions of all classes of nanoparticles and nanotubes of the pentagonal axial type are reported.     

Accelerating <Emphasis Type="Italic">k</Emphasis><Subscript>0</Subscript>

Combining the powers of a fast pneumatic transport system and the Automatic Activation Analyzer (AAA) of the Atominstitut in Vienna with the newest version of the IAEA k ₀-Software, the application of the k ₀-method to the determination of short-lived radionuclides becomes easily possible. By calculating Asp-values with the IAEA software, the often expensive and time-consuming measurement of Asp-values using certified reference materials is reduced to quality control checks. Measurements clearly show that the two approaches are equivalent, especially since both take self-absorption and neutron self-shielding into account. In this way it is possible to expand the library of the AAA with many hitherto unobtainable Asp-values. At the same time, using highly accurate Asp-values already measured for many short-lived radionuclides, k ₀-values for those can be produced with a simple procedure.     

Flow Cytometry Analysis of <Emphasis Type="Italic">G</Emphasis><Subscript>0</Subscript>/<Emphasis Type="Italic">G</Emphasis><Subscript>1</Subscript> Diploid Cell Fraction in Ovarian Cancer Tissue

The proportion of diploid cells in the G₀/G₁ cell cycle phases was estimated by flow cytometry in 60 samples of stage III serous ovarian cancer tissue. The tumor tissue shows considerable heterogeneity with regard to the content of this tissue fraction, which ranged from 27 to 95% with a median of 73%. Statistically significant differences in the size of this fraction were identified by comparing tumor subgroups sensitive and resistant to first-line platinum-taxane chemotherapy. Predictive significance of the G₀/G₁ fraction was concluded and quantitative evaluation of this fraction is recommended for clinical use.     

Polystyrene nanorod formation in <Emphasis Type="Italic">C</Emphasis><Subscript>12</Subscript><Emphasis Type="Italic">E</Emphasis><Subscript>5</Subscript> hemimicelle thin film templates

This paper reports the synthesis and characterization of polystyrene nanorods in hemicylindrical hemimicelles of a nonionic polyoxyethylene surfactant, C ₁₂ E ₅, on graphite. The surface structure is characterized by atomic force microscopy (AFM), Fourier transform infrared spectroscopy, and contact angle goniometry. Uniformly aligned polystyrene nanorods are captured by AFM. The nanorod dimensions are studied as a function of the reaction time and styrene monomer concentration. The template synthesis using self-assembled surfactant surface aggregates promises to create functional and stable nanostructures for optoelectronics and surface engineering.     

Conformations and properties of <Emphasis Type="Italic">O</Emphasis>-Alkyl-<Emphasis Type="Italic">S</Emphasis>-(2-<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-dialkylamino)-ethylmethylthiophosphonates

Conformers of the biologically active compounds CH₃P(O)(OR)(SCH₂CH₂NR ₂ ^′ ), where (I) R = i-C₄H₉, R′ = C₂H₅ and (II) R = C₂H₅, R′ = i-C₃H₇, are calculated within the AM1 level of theory. The elongated and twisted forms with maximum and minimum distances between a nitrogen atom and those of a phosphorus tetrahedron, respectively, and bearing a syn and anti oriented alkoxy group relative to a phosphoryl oxygen, are studied. It is found that the differences between the energy, electronic, and geometric parameters of these forms are apparent in differences between their properties, e.g., the ability to participate in complexation and protonation, reactions that to some extent simulate the interaction between a substance and a biological object.