Tetrahydrofuran and 3,3-bis(chloromethyl) oxetane triblock copolymers synthesized by two-end living cationic polymerization

Triblock copolymers based on tetrahydrofuran (THF) and 3,3-bis(chloromethyl) oxetane (BCMO), BCMO-block-THF-block-BCMO and poly(BCMO-co-THF)-THF-(BCMO-co-THF), have been synthesized by two-end living cationic polymerization with a bifunctional initiator, trifluoromethanesulfonic anhydride [(CF₃SO₂)₂O]. The polymers are obtained by using the two end propagating species of poly(THF) to initiate the sequential BCMO polymerization. The resulting polymers are characterized by infrared (IR), nuclear magnetic resonance (NMR), and differential scanning calorimetry (DSC), confirming that the polymers are ABA-type block copolymers. The identities of the molecular weights predetermined and which determined by GPC show the success of predetermining molecular weights of the polymers and preparing well-defined polymers. The narrow polydispersities, 1.1–1.3, indicate that the chains are propagating by a living mechanism. © 1993 John Wiley & Sons, Inc.     

Isothermal crystallization kinetics of poly(ethylene terephthalate)s of different molecular weights

The isothermal crystallization kinetics and morphology of poly(ethylene terephthalate) (PET) polymers of different molecular weights have been studied by means of differential scanning calorimetry and transmission microscopy (TM). The kinetic parameters of Avrami exponent n, the rate constant k, half time t _1/2, rate at 50 % crystallinity, τ _1/2 for crystallization of different PETs were evaluated from double logarithmic plots of log {?ln[1 ? X(t)]} versus log t, where X(t) is extent of crystallinity at a given crystallization temperature. The crystallization rate of polymers with high molecular weight found to be lower than that of polymers with low molecular weight, at the same crystallization temperature. It was found that the nucleation mechanism and growth dimension of polymers with low molecular weight are different from those of polymers with high molecular weight. The results of TM and isothermal crystallization kinetics showed a consistent trend for the crystallization of all PET polymers studied, comprising a primary stage and a secondary stage. The activation energy in the PET polymers of low molecular weight was found to be lower than that of polymers with high molecular weight.     

Synthesis of poly(1‐chloro‐2‐arylacetylene)s with high cis‐content and examination of their absorption/emission properties

A series of 1‐chloro‐2‐arylacetylenes [Cl‐C?C‐Ar, Ar = C₆H₅ ( 1 ), C₆H₄‐p‐i Pr ( 2 ), C₆H₄‐p‐Oi Pr ( 3 ), C₆H₄‐p‐NHC(O)Ot Bu ( 4 ), and C₆H₄‐o‐i Pr ( 5 )] were polymerized using (tBu₃P)PdMeCl/silver trifluoromethanesulfonate (AgOTf) and MoCl₅/SnBu₄ catalysts. The corresponding polymers [poly( 1 )–poly( 5 )] with weight‐average molecular weights of 6,500–690,000 were obtained in 10–91% yields. THF‐insoluble parts, presumably high‐molecular weight polymers, were formed together with THF‐soluble polymers by the Pd‐catalyzed polymerization. The Pd catalyst polymerized nonpolar monomers 1 and 2 to give the polymers in yields lower than the Mo catalyst, while the Pd catalyst polymerized polar monomers 3 and 4 to give the corresponding polymers in higher yields. The ¹H NMR and UV–vis absorption spectra of the polymers indicated that the cis‐contents of the Pd‐based polymers were higher than those of the Mo‐based polymers, and the conjugation length of the Pd‐based polymers was shorter than that of the Mo‐based polymers. Pd‐based poly( 5 ) emitted fluorescence most strongly among poly( 1 )–poly( 5 ). © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 382–388     

ROMP of t-butyl-substituted ferrocenophanes affords soluble conjugated polymers that contain ferrocene moieties in the backbone

A substituted ferrocenophane, 1,1′-((1-tert-butyl)-1,3-butadienylene)ferrocene, was synthesized and polymerized via ring-opening metathesis polymerization (ROMP) to give soluble high molecular weight polymers with ferrocenylene units in the backbone. The monomer readily underwent polymerization upon exposure to a tungsten-based metathesis initiator, W(CHC₆H₄-o-OMe)(NPh)[OCMe(CF₃)₂]₂ (THF), to give high molecular weight polymers (M_w=ca. 300,000). The molecular weights could be varied systematically by adjusting the monomer-to-catalyst ratio. UV/vis spectra revealed a bathochromic shift for the polymer, consistent with enhanced conjugation compared to the monomer. The polymer exhibited thermal properties similar to oligomeric poly(ferrocenylene). Cyclic voltammetry of the polymer suggested that the iron centers are coupled electronically. Upon doping with I₂ vapor, the polymers displayed semiconducting properties (σ=10⁻⁵ S cm⁻¹). Theoretical calculations were used to evaluate the nature of the bonding in these and related polymers.     

Synthesis of low polydispersity polybutadiene and polyethylene stars by convergent living anionic polymerization

Star‐shaped polybutadiene stars were synthesized by a convergent coupling of polybutadienyllithium with 4‐(chlorodimethylsilyl)styrene (CDMSS). CDMSS was added slowly and continuously to the living anionic chains until a stoichiometric equivalent was reached. Gel permeation chromatography‐multi‐angle laser light scattering (GPC‐MALLS) was used to determine the molecular weights and molecular weight distribution of the polybutadiene polymers. The number of arms incorporated into the star depended on the molecular weight of the initial chains and the rate of addition of the CDMSS. Low molecular weight polybutadiene arms (M_n = 640 g/mol) resulted in polybutadiene star polymers with an average of 12.6 arms, while higher molecular weight polybutadiene arms (M_n = 16,000 g/mol) resulted in polybutadiene star polymers with an average of 5.3 arms. The polybutadiene star polymers exhibited high 1,4‐polybutadiene microstructure (88.3–93.1%), and narrow molecular weight distributions (M_w/M_n = 1.11–1.20). Polybutadiene stars were subsequently hydrogenated by two methods, heterogeneous catalysis (catalytic hydrogenation using Pd/CaCO₃) or reaction with p‐toluenesulfonhydrazide (TSH), to transform the polybutadiene stars into polyethylene stars. The hydrogenation of the polybutadiene stars was found to be close to quantitative by ¹H NMR and FTIR spectroscopy. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 828–836, 2006     

Synthesis,optical, and electrochemical properties of novel copolymers on the basis of benzothiadiazole and electron‐rich arene units

Novel alternating conjugated copolymers ( P1–P6 ) consisting of an electron‐deficient benzothiadiazole and a variety of electron‐rich thiophene‐arene‐thiophene units were synthesized by palladium‐catalyzed polycondensations (Stille and Suzuki reactions), aiming at processable materials with a reduced optical band gap. The structures of P1–P6 were confirmed by ¹H NMR and ¹³C NMR, and their molecular weights were determined by size exclusion chromatography. In the Suzuki polycondensation, the role of the catalyst [Pd(PPh₃)₄ and Pd(OAc)₂] on the resulting molecular weight was investigated. Pd(OAc)₂ enhances the molecular weight of the polymers for both thiophene and phenylene bis‐boronic esters as compared with Pd(PPh₃)₄. The optical properties of the polymers were examined in solution and the solid state. The polymers with n‐octyl substituents ( P1 , P4 , P5 , and P6 ) on the thiophene rings possessed less‐planar structures as a result of torsional steric hindrance, and their absorption spectra appeared blueshifted as compared with their unsubstituted analogues ( P2 and P3 ). The electrochemical properties of the polymers were studied using cyclic voltammetry. Although the alkyl substitution affects the oxidation potential, only marginal differences in the reduction potentials were observed. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2360–2372, 2002     

Synthesis of fluorine‐containing star‐shaped poly(vinyl ether)s via arm‐linking reactions in living cationic polymerization

Various types of fluorine‐containing star‐shaped poly(vinyl ether)s were successfully synthesized by crosslinking reactions of living polymers based on living cationic polymerization. Star polymers with fluorinated arm chains were prepared by the reaction between a divinyl ether and living poly(vinyl ether)s with fluorine groups (C₄F₉, C₆F₁₃, and C₈F₁₇) at the side chain using cationogen/Et_1.5AlCl_1.5 in a fluorinated solvent (dichloropentafluoropropanes), giving star‐shaped fluorinated polymers in high yields with a relatively narrow molecular weight distribution. The concentration of living polymers for the crosslinking reaction and the molar feed ratio of a bifunctional vinyl ether to living polymers affected the yield and molecular weight of the star polymers. Star polymers with block arms were prepared by a linking reaction of living block copolymers of a fluorinated segment and a nonfluorinated segment. Heteroarm star‐shaped polymers containing two‐ or three‐arm species were synthesized using a mixture of different living polymer species for the reaction with a bifunctional vinyl ether. The obtained polymers underwent temperature‐induced solubility transitions in various organic solvents, and their concentrated solutions underwent sol–gel transitions, based on the solubility transition of a thermoresponsive fluorinated segment. Furthermore, a slight amount of fluorine groups were shown to be effective for physical gelation when those were located at the arm ends of a star polymer. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Polycyclotrimerization of aromatic diynes: Synthesis,thermal stability,and light‐emitting properties of hyperbranched polyarylenes

New aromatic diyne monomers of 1,4‐diethynyl‐2,5‐(dihexyloxy)benzene ( 1 ), 1,6‐diethynyl‐2‐(hexyloxy)naphthalene ( 2 ), and 9,9‐bis(4‐ethynylphenyl)fluorene ( 3 ) are synthesized. Their homopolymerizations and copolymerizations with 1‐octyne ( 4 ) or phenylacetylene ( 5 ) are effected by TaBr₅–Ph₄Sn and CpCo(CO)₂–hν, giving soluble hyperbranched polyarylenes with high molecular weights (M_w up to ～ 2.9 × 10⁵) in high yields (up to 99%). The structures and properties of the polymers are characterized and evaluated by IR, NMR, UV, PL, and TGA analysis. The polymers show excellent thermal stability (T_d > 400 °C) and carbonize when pyrolyzed at 900 °C. Upon photoexcitation, the polymers emit deep blue light in the vicinity of ～400 nm with fluorescence quantum yields up to 92%. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4249–4263, 2007     

Cationic cyclopolymerization of divinyl ethers with norbornane‐, norbornene‐, or adamantane‐containing substituents: Synthesis of cyclopoly(divinyl ether)s with bulky rigid side chains leading to high glass transition temperature

Cationic cyclopolymerizations of 2,2‐bis(vinyloxymethyl)bicyclo[2.2.1]heptane ( 1 ), 5,5‐bis(vinyloxymethyl)‐2‐bicyclo[2.2.1]heptene ( 2 ), and 2,2‐bis(vinyloxymethyl)tricyclo[3.3.1.1]^{3, 7}decane ( 3 ), divinyl ethers with a norbornane, norbornene, or adamantane unit, respectively, were investigated with the HCl/ZnCl₂ initiating system in toluene and methylene chloride at ?30 °C. All the reactions proceeded quantitatively to give gel‐free, soluble polymers in organic solvents. The number‐average molecular weight (M_n) of the polymers increased in direct proportion to monomer conversion and further increased on addition of a fresh monomer feed to the almost completely polymerized reaction mixture. The contents of the unreacted vinyl groups in the produced soluble polymers were less than ～10 mol %, and therefore, the degree of cyclization of the polymers was determined to be over ～90%. These facts show that cyclopolymerization of 1 , 2 , and 3 exclusively occurred and the poly(vinyl ether)s with the cyclized repeating units and polycyclic pendants were obtained with their molecular weights being regulated. BF₃OEt₂ initiator also caused cyclopolymerization of 1 , 2 , and 3 to give the corresponding high‐molecular‐weight cyclopolymers quantitatively. Glass transition temperatures (T_g's) of poly( 1 ) and poly( 2 ) were 165–180 °C, and T_g's of poly( 3 ) were 211–231 °C; these values are very high as vinyl ether polymers. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2445–2454     

Free-radical polymerization of a reducing vinyl sugar ester in dimethylformamide and water

To develop a new synthetic polymer containing sugar branches, radical polymerization of the reducing vinyl sugar ester 6-O-vinyladipoyl-D -glucose ( 1 ) was performed in an organic solvent or in water. The polymers obtained with several azoinitiators in dimethylformamide (DMF) showed comparatively low average molecular weight (M̄_n ≈ 4500). In contrast, the use of a redox initiator (FeSO₄ and H₂O₂) in water gave polymers of higher average molecular weight (M̄_n ≈ 33000) in higher yield (90%), followed by crosslinking at high conversions.     

Molecular Dynamics Study of Interaction between Acrylamide Copolymers and Alumina Crystal

Four acrylamide polymer flocculants, anionic polyacrylamide P(AA-co-AM), cationic poly-acrylamide P(DMB-co-AM), nonionic polyacrylamide P(AM), and hydrophobical polyacry-lamide P(OA-co-AM) have been prepared by copolymerizing with acrylic acid, cationic monomer dimethylethyl (acryloxyethyl) ammonium bromide (DMB) and hydrophobical monomer octadecyl acrylate with acrylamide. The interactions between the flocculants withthe (012) surface of alumina crystal (Al₂O₃) have been simulated by molecular dynamics method. All the polymers can bind tightly with Al₂O₃ crystal, the interaction between the O of polymers and Al of the (012) surface of Al₂O₃ is significantly strong. The order of binding energy is as follows: P(DMB-co-AM)>P(OA-co-AM)>P(AA-co-AM)>P(AM), implying a better flocculation performance of P(DMB-co-AM) than the others. Analy-sis indicates that binding energy is mainly determined by Coulomb interaction. Bonds are found between the O atoms of the polymers and the Al atoms of Al₂O₃. The poly-mers' structures deform when they combine with Al₂O₃ crystal, but the deformation en-ergies are low and far less than non-bonding energies. Flocculation experiments in sus-pension medium of 1%Kaolin show a transmittancy of 90.8% for 6 mg/L P(DMB-co-AM) and 73.0% for P(AM). The sequence of flocculation performance of four polymers is P(DMB-co-AM)>P(OA-co-AM)>P(AA-co-AM)>P(AM), which is in excellent agreement with the simulation results of binding energy.     

Living cationic polymerization of 2-vinyloxyethyl phthalimide: Synthesis of poly(vinyl ether) with pendant primary amino functions

Cationic polymerization of 2-vinyloxyethyl phthalimide ( 1 ) in CH₂Cl₂ at ?15°C with hydrogen iodide/iodine (HI/I₂) as initiator led to living polymers of a narrow molecular weight distribution (M?_w/M?_n = 1.1–1.25). The number-average molecular weight of the polymers was in direct proportion to monomer conversion and could be controlled in the range of 1000–6000 by regulating the 1 /HI feed ratio. However, when a fresh monomer was supplied to the completely polymerized reaction mixture, the molecular weight of the polymers was not directly proportional to monomer conversion. The polymerization of 1 by boron trifluoride etherate (BF₃OEt₂) in CH₂Cl₂ at ?78°C gave polymers with relatively high molecular weight (M?_w > 20,000) and broad molecular weight distribution (M?_w/M?_n ～ 2). The HI/I₂-initiated polymerization of 1 was an order of magnitude slower than that of ethyl vinyl ether, probably because of the electron-withdrawing phthalimide pendant. Hydrazinolysis of the imide functions in poly( 1 ) gave a water-soluble poly(vinyl ether) ( 3 ) with aliphatic primary amino pendants.     

Brush‐First ROMP of poly(ethylene oxide) macromonomers of varied length: impact of polymer architecture on thermal behavior and Li+ conductivity

The properties of polymeric materials are dictated not only by their composition but also by their molecular architecture. Here, by employing brush‐first ring‐opening metathesis polymerization (ROMP), norbornene‐terminated poly(ethylene oxide) (PEO) macromonomers ( MM‐n , linear architecture), bottlebrush polymers ( Brush‐n , comb architecture), and brush‐arm star polymers ( BASP‐n , star architecture), where n indicates the average degree of polymerization (DP) of PEO, are synthesized. The impact of architecture on the thermal properties and Li⁺ conductivities for this series of PEO architectures is investigated. Notably, in polymers bearing PEO with the highest degree of polymerization, irrespective of differences in architecture and molecular weight (~100‐fold differences), electrolytes with lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) as an Li⁺ source exhibit normalized ionic conductivities (σ_n) within only 4.9 times difference (σ_n = 29.8 × 10^?5 S cm^?1 for MM‐45 and σ_n = 6.07 × 10^?5 S cm^?1 for BASP‐45 ) at a concentration of Li⁺ r = [Li⁺]/[EO] = 1/12 at 50 °C. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 448–455     

Cooperative chain relaxation in miscible polymer blends

Orientation relaxation of dissimilar chains in the molten miscible blends, poly(methyl methacrylate)/poly(vinylidene fluoride) and poly(methyl methacrylate)/poly(vinylidene fluoride-co-trifluoroethylene), were investigated by measuring (1) the change of infrared dichroic ratio with time after the uniaxial stretching of film specimens, (2) the shear stress relaxation spectrum, and (3) birefringence relaxation in shear. The dissimilar polymers showed an identical time variation of the normalized Hermans orientation function. The blend showed a relaxation spectrum with a single characteristic relaxation time τ_c, depending on the blend composition. The birefringence relaxed monotonically, remaining positive. These results suggest that the dissimilar polymers do not relax independently but cooperatively. This behavior may be induced by a constraint due to the specific interactions between the dissimilar polymers, e.g., weak hydrogen bonding. For the cooperative chain relaxation, a third power relationship was found; τ_c/τ_e vprop; (M/M_e),³ where τ_e and M_e are the relaxation time and molecular weight of entanglement strand, respectively, and M is the number average molecular weight in the blend.     

Preparation of ultra high molecular weight amorphous poly(1‐hexene) by a Ziegler–Natta catalyst

High molecular weight polymers such as poly (α‐olefin)s play a key role as drag‐reducing agents which are commonly used in pipeline industry. Heterogeneous Ziegler–Natta catalyst system of MgCl₂.nEtOH/TiCl₄/donor was prepared using a spherical MgCl₂ support and utilized in synthesis of poly(1‐hexene)s with a viscosity average molecular weight (M_v) up to 3.5 × 10³ kDa. The influence of effective parameters including Al/Ti ratio, polymerization temperature, monomer concentration, effect of alkylaluminus type on the productivity, and molecular weight of the products was evaluated. It was suggested that the reactivity of the Al‐R group and the bulkiness of the cocatalyst were correlated to the performance of the Ziegler–Natta catalyst at different polymerization time and temperatures, affecting the catalyst activity and M_v of polymers. Moreover, bulk polymerization method leads to higher viscosity average molecular weights, revealing the remarkable effect of polymerization method on the chain microstructure. Fourier transform infrared, ¹³C Nuclear magnetic resonance spectra, and DSC thermogram of the prepared polymers confirmed the formation of poly(1‐hexene). The properties of the polymers measured by vortex test showed that these polymers could be used as a drag‐reducing agent. Drag‐reducing behaviors of the polymers exhibited a dependence on the M_v of the obtained polymers that was changed by variation in polymerization parameters. Copyright © 2016 John Wiley & Sons, Ltd.     

Precise Synthesis of New Triblock Co- and Terpolymers by a Methodology Combining Living Anionic Polymers with a Specially Designed Linking Reaction

Five A-B-A′, A-C-A′, B-A-B′, C-A-C′, and C-B-C′ triblock terpolymers with block orders difficult to synthesize by sequential polymerization have been successfully synthesized by a new methodology combining living anionic polymers with a specially designed linking reaction using α-phenylacrylate as the reaction site. Here, A(A′), B(B′), and C(C′) represent groups of polymers (having chain-end anions with different nucleophilicities), which are only polymerizable from A(A′) to B(B′) to C(C′) via sequential polymerization. The corresponding polymers are polystyrene (A) and poly(α-methylstyrene) (A′), poly(2-vinylpyridine) (B) and poly(4-vinylpyridine) (B′) and polymers from methacrylate type monomers like poly(methyl methacrylate) (C), poly(tert-butyl methacrylate) (C′), poly(2-hydroxyethyl methacrylate) (C′), poly(2,3-dihydroxypropyl methacrylate) (C′), and poly(ferrocenylmethyl methacrylate) (C′). Furthermore, three synthetically difficult B-A-B, C-A-C, and C-B-C triblock copolymers with molecular asymmetry in both side blocks have also been synthesized by the developed methodology. All of the polymers thus synthesized are quite new triblock terpolymers and copolymers with well-defined structures, i.e., precisely controlled molecular weights, compositions and narrow molecular weight distributions (M_w/M_n ≤ 1.05).     

Synthesis of novel polymer containing selenium by radical addition polymerization of 1,4-benzenediselenol to 1,4-divinylbenzene

A novel addition polymerization of 1,4-benzenediselenol (BDSe) to 1,4-divinylbenzene (DVB) was carried out with various azo radical initiators [dimethyl 2,2′-azobisisobutyrate (DAIB), 1,1′-azobis(1-acetoxy-1-phenylethane) (AAPE), and AIBN] in toluene at 65 and 75°C under a nitrogen atmosphere. The polymerization proceded without an induction period, and pale-yellowish powder polymers were obtained in 89% yields for 75 h (DAIB), 89% yields for 24 h (AAPE), and 60% yields for 8 h (AIBN). The molecular weight (M_w) of the insoluble polymers in toluene was about 4000 (IBN) to 14,000 (DAIB or AAPE) by GPC. The polymer had an alternating structure of BDSe to DVB units by ¹H-NMR, IR analyses, and selenium contents, but the polymer contained the diselenide linkage by Raman spectroscopy. By AIBN initiator, the yield of the polymers did not increase over 60% and higher molecular weight polymer was hardly obtained. According to the model addition reaction of benzeneselenol to styrene by AIBN, it was found that AIBN was consumed by the side reaction between dimethyl-N-(2-cyano-2-propyl)ketenimine derivedAppl 11 from AIBN and benzeneselenol to give the adduct C, MH⁺ 295 by DCI MS. On the other hand, DAIB and AAPE initiators, which do not form a ketenimine intermediate, gave the polymers of higher molecular weight in a higher yield. The polymer film exhibited high refractive index (n²⁵_D = 1.81) and a reversible phase transition between a transparency and an opaque by thermal mode. © 1994 John Wiley & Sons, Inc.     

Synthesis and Characterization of Novel Methacrylates Derived from Morpholine and Pyrrolidine: The Determination of Kinetic Parameters with Thermogravimetric Analysis

Abstract

The synthesis of two new methacrylate esters containing morpholine and pyrrolidine group are described. The monomers produced from the reaction of corresponding morpholino chloroacetamide and pyrrolidino chloroacetamide with sodium methacrylate were polymerized in DMSO solution at 65°C using AIBN as an initiator. The monomers and their polymers were characterized by Fourier transform infrared (FTIR), ¹H‐ and ¹³C‐NMR spectroscopy. The glass transition temperature of the polymers were investigated by DSC and thermal decomposition activation energies were calculated by the Ozawa method using the SETARAM Labsys thermogravimetric analysis (TGA) thermobalance, respectively. By using gel permeation chromatography, weight average (M¯_w) and number average (M¯_n) molecular weights and polidispersity indices of the polymers were determined.     

Synthesis and chiroptical properties of L‐valine‐containing poly(phenylacetylene)s with (a)chiral pendant terminal groups

Poly(phenylacetylene)s containing L ‐valine residues (P 1 ) with (a)chiral pendant terminal groups R^(*) [?(HC?C{C₆H₄CONHCH[CH(CH₃)₂]COO? R^(*)})_n?]; R^(*) = 1‐octyl (P 1 o), (1S,2R,5S)‐(+)‐menthyl [P 1 (+)], (1R,2S,5R)‐(?)‐menthyl [P 1 (?)] are designed and synthesized. The polymers are prepared by organorhodium catalysts in high yields (yield up to 88%) with high molecular weights (M_w up to ?6.4 × 10⁵). Their structures and properties are characterized by NMR, IR, TGA, UV, and circular dichroism analyses. All the polymers are thermally fairly stable (T_d ≥ 320 °C). The chiral moieties induce the poly(phenylacetylene) chains to helically rotate in a preferred direction. The chirality of the pendant terminal groups affects little the helicity of the polymers but their bulkiness stabilizes the helical conformation against solvent perturbation. The backbone conjugation and chain helicity of the polymers can be modulated continuously and reversibly by acid. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2117–2129, 2006     

Dendritic analogues of engineering plastics - a general one-step synthesis of dendritic polyaryl ethers

The first general single-step route to dendritic or cascade polyaryl ethers analogous to common linear polyaryl ethers is described. The sodium salts of four AB₂ monomers each containing a single phenolic hydroxyl group and two aryl fluorides activated toward nucleophilic substitution by carbonyl, sulphonyl, or tetrafluorophenyl moieties are shown to polymerize in hot N, N-dimethylacetamide. The products are high molecular weight polymers (7000 < M_n < 36000), have narrow polydispersities (1.50 < M_w/M_n < 4.50), and are highly soluble in organic solvents. The molecular weights of two of the polymers increase with monomer concentration. The polymers are thermally stable (500 °C under N₂) and have glass transition temperatures ranging from 135 to 231 °C.