Mechanism and Kinetics for the Reaction of NCS and OH Radicals

The mechanism and dynamical properties for the reaction of NCS and OH radicals have been investigated theoretically. The minimum energy paths (MEP) of the reaction were calculated using the density functional theory(DFT) at the B3LYP/6-311 G^** level, and the energies along the MEP were further refined at the QCISD(T)/6-311 G^** level. As a result, the reaction mechanism of the title reaction involves three channels, producing HCS NO and HNC SO products, respectively. Path Ⅰ and path Ⅱ are competitive, with some advantages for path Ⅰ in kinetics. As for path Ⅲ, it looks difficult to react for its high energy barrier. Moreover, the rate constant have been calculated over the temperature range of 8190-2500K using canonical variational transition-state theory (CVT). It was found that the rate constants for both path Ⅰ and path Ⅱ are negatively dependent on temperature, which is similarwith the experimental results for reactions of NCS with NO and NO2, and the variational effect for the rate constant calculation olavs an important role in whole temperature range.     

Kinetics and Mechanism of the Exothermic First-stage Decomposition Reaction of Dinitroglycoluril

Introduction Dinitroglycoluril (DINGU) is a typical cyclourea nitramine. Its crystal density is 1.94 gcm-3. The detonation velocity corresponding to =1.94 gcm-3 is about 8450 ms-1. Its sensitivity to impact is better than that of cyclotrimethylenetrinitramine. It has the potential for possible use as high explosive from the point of view of the above-mentioned high performance. Its preparation,1-4 properties1-4 and hydrolytic behavior4 have been reported. In the present paper, we report i…     

Chemoselective Intramolecular Formal Insertion Reaction of Rh–Nitrenes into an Amide Bond Over C−H Insertion

The past few decades have witnessed extensive efforts to disclose the unique reactivity of metal–nitrenes, because they could be a powerful synthetic tool for introducing the amine functionality into unactivated chemical bonds. The reactivity of metal–nitrenes, however, is currently mainly confined to aziridination (an insertion into a C=C bond) and C−H amination (an insertion into a C−H bond). Nitrene insertion into an amide C−N bond, however, has not been reported so far. In this work we have developed a rhodium-catalyzed one-nitrogen insertion into amide C−N and sulfonamide S−N bonds. Experimental and theoretical analyses based on density functional theory indicate that the formal amide insertion proceeds via a rhodium-coordinated ammonium ylide formed between the nitrene and the amide nitrogen, followed by acyl group transfer concomitant with C−N bond cleavage. Mechanistic studies have allowed rationalization of the origin of the chemoselectivity observed between the C−H and amide insertion reactions. The methodology presented herein is the first example of an insertion of nitrene into amide bonds and provides facile access to unique diazacyclic systems with an N−N bond linkage.     

Insertion of Selenium into Zinc Carbon Bond and Applicationin Synthesis of Arylselenoester

Selenium was inserted into the zinc carbon bond of aryl zinc halides to form corresponding zinc selenoates. They rected in THF-HMPA with acylhalides to afford the selenoesters in high yields.     

DFT Investigation on the Insertion Reaction of an Isocyanide into the（Silyl）（silylene）molybdenum Si-C Bond

The chemistry of silylene-transition-metal complexes LnM(=SiR2)SiR3 is one of the attractive synthetic targets in organometallic chemistry for such complexes are key intermediates in many transition metal-catalyzed systems.In the present work,the novel insertion reactions of an isocyanide into the Cp*Mo(CO)2(=SiMe2)(SiMe3) Si-C bond were investigated extensively by using the DFT method.The effective core potentials(ECP) with a double-ζ valence basis set(LanL2DZ) were employed for Mo and Si and the standard 6-31G basis set for all other atoms.Polarization functions[22] were added for Si(ζd = 0.262),C(ζd = 0.8) and N(ζd = 0.8).The effect of solvent was evaluated with the standard PCM model.Our calculations show that the two-step channel is energetically favorable,and the solvation mode has minor influence on the relative energies.     

Late-Stage Modification of Drugs via Alkene Formal Insertion into Benzylic C−F Bond

C−F insertion of carbon-atom units is underdeveloped although it poses significant potential applications in both drug discovery and development. Herein, we report a photocatalytic protocol for late-stage modification of trifluoromethyl aromatic drugs involving formal insertion of abundant alkene feedstocks into a benzylic C−F bond selectively. This redox-neutral transformation features mild conditions and extraordinary functional group tolerance. Preliminary studies are consistent with this transformation involving a radical-polar crossover pathway. Additionally, it offers an alternative strategy for difunctionalization of alkenes via quenching of the carbocation intermediate with nucleophiles other than external fluoride.     

Theoretical Study on the Kinetics of Electron Transfer for Bond—breaking Reaction

ＩｎｔｒｏｄｕｃｔｉｏｎＦｒｅｅｒａｄｉｃａｌｆｏｒｍａｔｉｏｎｆｒｏｍｈａｌｏｇｅｎａｔｅｄｈｙｄｒｏｃａｒｂｏｎｓｈａｓｒｅｃｅｉｖｅｄｃｏｎｓｉｄｅｒａｂｌｅａｔｔｅｎｔｉｏｎｂｅｃａｕｓｅｏｆｉｔｓｓｃｉｅｎｔｉｆ ｉｃａｎｄｅｎｖｉｒｏｎｍｅｎｔａｌｒｅｌｅｖａｎｃｅ .1 6 Ｔｈｉｓｒｅａｃｔｉｏｎｓｅｅｍｓｔｏｐｌａｙａｎｉｍｐｏｒｔａｎｔｒｏｌｅｉｎｖａｒｉｏｕｓｐｒｏｃｅｓｓｅｓ .Ｂｏｎｄ ｂｒｅａｋ ｉｎｇｒｅａｃｔｉｏｎｉｓａｐｏｗｅｒｆｕｌｓｙｎｔｈｅｔｉｃｔｏｏｌｔｏｐｒｏｖ…     

On the Reaction Mechanism of Br2 with OCS

The reaction mechanism of photochemical reaction between Br2 (^1∑) and OCS (^1∑) is predicted by means of theoretical methods. The calculated results indicate that the direct addition of Br2 to the CS bond of OCS molecule is more favorable in energy than the direct addition of Br2 to the CO bond. Furthermore, the intermediate isomer syn-BrC(O)SBr is more stablethe rmodynamically and kinetically than anti-BrC(O)SBr. The original resultant anti-BrC(O)SBr formed in the most favorable reaction channel can easily isomerize into the final product syn-BrC(O)SBr with only 31.72 kJ/mol reaction barrier height. The suggested mechanism is in good agreement with previous experimental study.     

Kinetics and Mechanism of the Thermal Decomposition Reaction of 3,3-Bis（azidomethyl）oxetane／Tetrahydrofuran Copolymer

Introduction 3,3-Bis(azidomethyl)oxetane/tetrahydrofuran (BAM- O/THF, marked as B/T) copolymer can be used as an azide binder of high energy propellants with the lower signature, and lower sensitivity to improve the me-chanical properties at lower temperature and the burning rate characteristics. Its decomposition kinetics and the effects of THF on the decomposition kinetics of BAMO copolymers have been reported.1,2 In the present work, we report the kinetic model function and kinetic pa…     

Insertion of O-H Bond of Rh(Ⅱ)-methylene Carbene into Alcohols: A Stepwise Mechanism More Plausible than a Concerted Mechanism

The mechanisms of insertion of O-H bond of Rh( Ⅱ ) -methylene carbene into methanol and ethanol were studied by using B3LYP functional both in gas phase and in CH2Cl2. The formation of free alcoholic oxonium ylides is found to be impossible. Alcoholic oxonium ylide are formed as the intermediates before both the stepwise and the concerted transition states of insertion of O-H bond of Rh( Ⅱ ) -methylene carbene into methanol and ethanol. With regard to the mechanisms of insertion of O-H of Rh( Ⅱ ) -methylene carbene into alcohols, analysis of the energy barriers of the two mechanisms indicate that the stepwise mechanism is more plausible than the concerted mechanism.     

Insertion of O-H Bond of Rh（ Ⅱ）-methylene Carbene into Alcohols： A Stepwise Mechanism More Plausible than a Concerted Mechanism

IntroductionDirhodium(Ⅱ) complexes can catalyze the valua-ble dirhodium(Ⅱ) reactions ofα-diazo carbonyl com-pounds[1—7]. The generated Rh(Ⅱ) carbene interme-diates can subsequently undergo synthetically diversetransformations, including ylide formati     

Kinetics of the Ziegler-Natta Polymerization of 1-Octene——The Kinetics and Mechanism of the Induction period

The kinetics of the induction period in the polymerization of 1-octene catalyzed by Solvay TiCl3-alkyl aluminium was studied with a dilatometer. The induction period decreases as [TiCl3] and [M]0 increase and temperature rises. It was observed through a microscope that large catalyst particles broke up into small particles in the induction period. So a kinetic model was proposed which ascribes the induction period to the breaking up of catalyst particles under the effect of polymer, and the most of the experimental results can be explained on the basis of the model.     

Insertion of Elemental Selenium into Zinc Carbon Bond and Application in Synthesis of α-Selenocarbonyl Compound

Selenium inserted into the zinc carbon bond of alkyl and aryl zinc halides to form the corresponding the zinc alkyl and arylselnoates. They reacted in THF-HMPA with α-bromo carbonyl compounds to afford the α-selenocarbonyl compounds in high yields.     

Ab initio Study on the Tautomerization Mechanism and the Kinetics of Formamide

The tautomerism of formamide has been investigated by ab initio calculation using RHF/4-31G basis set. The change in some physical properties along the reaction path is presented. In the study of molecular reaction kinetics, we have calculated all the kinetic parameters according to statistical thermodynamics and transition state theory. The combination of kinetics analysis with IRC analysis has indicated that the tautomerism is concerted but the geometric changes are nonsynchronous; the lifetime of the transition state is short and the transition state is tight type; the formamide is more stable than formimidic acid; the kinetic rate constant of backward reaction is larger than that of the forward reaction in the range of temperature studied.     

Intramolecular Nitrene Insertion into Saturated C−H-Bond-Mediated C−N Bond Cleavage of a Coordinated NHC Ligand

Ruthenium(II) complexes bearing a tridentate bis(N-heterocyclic carbene) ligand reacted with iminoiodanes (PhI=NR) resulting in the formation of isolable ruthenium(III)–amido intermediates, which underwent cleavage of a C−N bond of the tridentate ligand and formation of an N-substituted imine group. The Ru^III–amido intermediates have been characterized by ¹H NMR, UV/Vis, ESI-MS, and X-ray crystallography. DFT calculations were performed to provide insight into the reaction mechanism.     

Studies on the Kinetics of the FO CO Reaction

IntroductionAproposedcycleinvolvingtheFOradicalsisl:ThecontributionofthiscycletothecatalyticdestrUctionofozoneisdeterndnedbythefirststep.Thereaction(l)isalsothoughttobeapossiblesinkforatInosphericCO2.Baueretal.3gavearateconstantofl.24.lO-i3cm3/sforreaction(l),whichwasbelievedtobecorrectwithinafactorof2at9(X)-l4(X)K.Theactivationenergywasestimatedtobe46.OkJ/mol.Bedzhanyanetal.4reportedk<4xlO-"and<5xlO-l6cm3/sat3ooand55OK,respectively.Alowerbarrierofl3.8kJ/molcanbeextrapoIated.Francisco…     

A New Rearrangement Reaction of 2-Phenyl Substituted Benzothiazepine with Ethoxycarbonyl Carbene─Mechanism of the Reaction and Structure of the Product

Intheprevi0usaFticlesl-2wehavereportedthatthereacti0n0fbenz0diazepinewithethoxycarbonylcarbenemayobtainnormal[2 l]cycIoadditi0npr0ductsregardlessthe2-substitUentismethyl0rphenyl.Howeverunderthesamec0nditi0nsthereaction0fbenzothiazepinewithethoxycarbonylcarbeneunderwentrearrangementreacti0n.Forexample,whenthe2-substituentismethyl,thereacti0nofbenzothiazepinewithethoxycarbonylcarbenegivearing-openingproductIIatroomorhightemperature'.Whenthe2-substituentisphenyl,weunexpectedlyfoundan0thernewrea…     

Kinetics and Mechanism of Exothermic First-stage Decomposition Reaction of 2,6-Bis （2,2,2-trinitroethyl）glycoluril

The thermal behavior, mechanism and kinetic parameters of the exothermic first-stage decomposition of the title compound in a temperature-programmed mode were investigated by means of DSC, TG-DTG and IR. The reaction mechanism was proposed. The kinetic model function in differential form, apparent activation energy(Ea) and pre-exponential factor(A) of this reaction are (3/2)(1-a)[-ln(1-a)]1/3, 185.52 kJ/mol and 1017.78 s-1, respectively. The critical temperature of the thermal explosion of the compound is 201.30 ℃. The values of ΔS≠, ΔH≠ and ΔG≠ of this reaction are 72.46 J/(mol · K), 175.1 kJ/mol and 141.50 kJ/mol, respectively.     

Mechanism of the Reaction of Nucleophiles >P-O− with the C-Br Bond. Bromophosphate as an Intermediate

Abstract

The reaction of the ions >P-O^? and >P-S^? with a-bromocarboxylic esters proceeds through the nucleophilic displacement on bromine which results in the release of an enol anion as a nucleofuge.