Study of half-sandwich platinum group metal complexes bearing dpt-NH2 ligand

A quite general approach for the preparation of η⁵-and η⁶-cyclichydrocarbon platinum group metal complexes is reported. The dinuclear arene ruthenium complexes [(η⁶-arene)Ru(μ-Cl)Cl]₂ (arene = C₆H₆, C₁₀H₁₄ and C₆Me₆) and η⁵-pentamethylcyclopentadienyl rhodium and iridium complexes [(η⁶-C₅Me₅)M(μ-Cl)Cl]₂ (M = Rh, Ir) react with 2 equiv. of 4-amino-3,5-di-pyridyltriazole (dpt-NH₂) in presence of NH₄PF₆ to afford the corresponding mononuclear complexes of the type [(η⁶-arene)Ru(dpt-NH₂)Cl]PF₆ {arene = C₁₀H₁₄ (1), C₆H₆ (2) and C₆Me₆ (3)} and [(η⁶-C₅Me₅)M(dpt-NH₂)Cl]PF₆ {M = Rh (4), Ir (5)}. However, the mononuclear η⁵-cyclopentadienyl analogues such as [(η⁵-C₅H₅)Ru(PPh₃)₂Cl], [(η⁵-C₅H₅)Os(PPh₃)₂Br], [(η⁵-C₅Me₅)Ru(PPh₃)₂Cl] and [(η⁵-C₉H₇)Ru(PPh₃)₂Cl] complexes react in presence of 1 equiv. of dpt-NH₂ and 1 equiv. of NH₄PF₆ in methanol yielded mononuclear complexes [(η⁵-C₅H₅)Ru(PPh₃)(dpt-NH₂)]PF₆ (6), [(η⁵-C₅H₅)Os(PPh₃)(dpt-NH₂)]PF₆ (7), [(η⁵-C₅Me₅)Ru(PPh₃)(dpt-NH₂)]PF₆ (8) and [(η⁵-C₉H₇)Ru(PPh₃)(dpt-NH₂)]PF₆ (9), respectively. These compounds have been totally characterized by IR, NMR and mass spectrometry. The molecular structures of 4 and 6 have been established by single crystal X-ray diffraction and some of the representative complexes have also been studied by UV–Vis spectroscopy.     

Mononuclear Complexes of Platinum Group Metals Containing η6‐ and η5‐Cyclic Π‐Perimeter Hydrocarbon and Pyridylpyrazolyl Derivatives: Syntheses and Structural Studies

Piano‐stool‐shaped platinum group metal compounds, stable in the solid state and in solution, which are based on 2‐(5‐phenyl‐1H‐pyrazol‐3‐yl)pyridine ( L ) with the formulas [(η⁶‐arene)Ru( L )Cl]PF₆ {arene = C₆H₆ ( 1 ), p‐cymene ( 2 ), and C₆Me₆, ( 3 )}, [(η⁶‐C₅Me₅)M( L )Cl]PF₆ {M = Rh ( 4 ), Ir ( 5 )}, and [(η⁵‐C₅H₅)Ru(PPh₃)( L )]PF₆ ( 6 ), [(η⁵‐C₅H₅)Os(PPh₃)( L )]PF₆ ( 7 ), [(η⁵‐C₅Me₅)Ru(PPh₃)( L )]PF₆ ( 8 ), and [(η⁵‐C₉H₇)Ru(PPh₃)( L )]PF₆ ( 9 ) were prepared by a general method and characterized by NMR and IR spectroscopy and mass spectrometry. The molecular structures of compounds 4 and 5 were established by single‐crystal X‐ray diffraction. In each compound the metal is connected to N1 and N11 in a k² manner.     

Ligating properties of thionitrosoamines: IV. Cationic complexes of rhodium(I), rhodium(III), and ruthenium(II) containing N-thionitrosodimethylamine

The solvento species obtained by treatment of the complexes [Rh(1,5-cyclooctadiene)Cl]₂, [Rh(norbornadiene)Cl]₂, [Rh(CO)₂Cl]₂, C₅H₅Rh(CO)I₂, [C₅Me₅RhCl₂]₂, and [Ru(C₆H₆)Cl₂]₂ with AgPF₆ in acetone or acetonitrile react with a large excess of Me₂NNS to give the compounds [Rh(1,5-C₈H₁₂)-(SNNMe₂)₂]PF₆ (1a), [Rh(C₇H₈)(SNNMe₂)₂]PF₆ (1b), [Rh(CO)₂(SNNMe₂)₂]PF₆ (2), [C₅H₅Rh(SNNMe₂)₃](PF₆)₂ (3), [C₅Me₅Rh(SNNMe₂)₃](PF₆)₂ (4), and [Ru(C₆H₆(SNNMe₂)₃](PF₆) (5). If the thionitroso ligand is not preent in large excess decomposition often occurs. The use of AgClO₄ allows isolation of the perchlorate salts of 1a, 1b, 2, 4, and 5, and the complexes [C₅H₅Rh-(SNNMe₂)₂(ClO₄)ClO₄ (6) and Rh(1,5-C₈H₁₂)(SNNMe₂)(ClO₄) (7). In the H¹ NMR spectra the methyl protons of Me₂NNS are observed as two quadruplets, in the range δ 3.75–4.25 (⁴J(HH) ca. 0.7 Hz) because of restricted rotation around the NN bond. The rhodium(I) complexes (1a, 1b, and 2) reacts with PPh₃ or p-tolylPPh₂ to give labile products, and only [Rh(1,5-C₈H₁₂)(SNNMe₂)(PPh₃)]ClO₄ (8) and [Rh(1,5-C₈H₁₂)(SNNMe₂)(p-tolylPPh₂)]ClO₄ (9) were isolated and characterized.     

NEW RUTHENIUM(II) COMPLEXES CONTAINING ORGANODISULFIDE LIGANDS

Abstract

The new complexes [CpRu(PPh₃)₂(RSSR)PF₆ R=CH₃, iso-Pr, CH₂C₆H₅ and C₆H₅ have been prepared from the reaction of CpRu(PPh₃)₂Cl with RSSR in CH₃OH in presence of NH₄Cl. This result contrasts with the oxidative additions of RSSR to CpFe(dppe)1 dppe=PPh₂ (CH₂)₂PPh₂ to give [CpFe(dppe)SR]PF₆ (C. Diaz et al., J. Organomet. Chem. 516, 59 (1996)). Huckel calculations on model fragments CpFe(PPh₃)₂ and CpRu(PPh₃)₂ suggest that the higher electron density of iron could explain the differences observed in reactivity. Possible biological implications are discussed.     

Structural,Theoretical, and Spectroscopic Study of Mercury(II) Complexes of two New Unsymmetric Phosphorus Ylides

Abstract

The reaction of Ph₂PCH₂PPh₂ (dppm) with 4-methylphenacyl bromide and 2-(bromoacetyl)naphthalene in chloroform produce the new phosphonium salts [Ph₂PCH₂PPh₂CH₂C(O)C₆H₄Me]Br (1) and [Ph₂PCH₂PPh₂CH₂C(O)C₁₀H₇]Br (2). Further, by reaction of the monophosphonium salts of dppm with the strong base Et₃N the corresponding bidentate phosphorus ylides, Ph₂PCH₂P(Ph)₂ = C(H)C(O)C₆H₄Me (3) and Ph₂PCH₂P(Ph)₂ = C(H)C(O)C₁₀H₇ (4) were obtained. The reaction of these ligands with mercury(II) halides in dry methanol led to the formation of the mononuclear complexes {HgX ₂[(Ph₂PCH₂PPh₂C(H)C(O)C₆H₄Me)]} [X = Cl (5), Br (6), and I (7)] and {HgX ₂[(Ph₂PCH₂PPh₂C(H)C(O)C₁₀H₇)]} [X = Cl (8), Br (9), and I (10)]. Characterization of the obtained compounds was performed by elemental analysis, IR, ¹H, ³¹P, and ¹³C NMR spectra. The structure of compounds 3 and 10 are unequivocally determined by single crystal X-ray diffraction techniques. X-ray analysis of 10 reveals the presence of mononuclear complex containing Hg atom in a distorted tetrahedral environment. In all complexes, the title ylides are coordinated through the ylidic carbon and the phosphine phosphorus. Computational studies on ligand 4 and complexes 8, 9, and 10 at DFT (B3LYP) level of theory are also reported. It was shown that the formation of P,C-coordinated 1+1 complex 10 is energetically more favored than corresponding P,P-coordinated 1+2 product.

[Supplemental materials are available for this article. Go to the publisher's online edition of Phosphorus, Sulfur, and Silicon and the Related Elements to view the following free supplemental files: Additional figures]     

Reactivity Studies of η5‐ Indenyl and η5‐Cp* Ruthenium(II) Complexes towards some Polypyridyl Ligands

The reaction of [(η⁵‐L³)Ru(PPh₃)₂Cl], where; L³ = C₉H₇ ( 1 ), C₅Me₅ (Cp*) ( 2 ) with acetonitrile in the presence of [NH₄][PF₆] yielded cationic complexes [(η⁵‐L³)Ru(PPh₃)₂(CH₃CN)][PF₆]; L³= C₉H₇ ([3]PF₆) and L³ = C₅Me₅ ([4]PF₆), respectively. Complexes [3]PF₆ and [4]PF₆ reacts with some polypyridyl ligands viz, 2,3‐bis (α‐pyridyl) pyrazine (bpp), 2,3‐bis (α‐pyridyl) quinoxaline (bpq) yielding the complexes of the formulation [(η⁵‐L³)Ru(PPh₃)(L²)]PF₆ where; L³ = C₉H₇, L² = bpp, ([5]PF₆), L³ = C₉H₇, L² = bpq, ([6]PF₆); L³ = C₅Me₅, L² = bpp, ([7]PF₆) and bpq, ([8]PF₆), respectively. However reaction of [(η⁵‐C₉H₇)Ru(PPh₃)₂(CH₃CN)][PF₆] ([3]PF₆) with the sterically demanding polypyridyl ligands, viz. 2,4,6‐tris(2‐pyridyl)‐1,3,5‐triazine (tptz) or tetra‐2‐pyridyl‐1,4‐pyrazine (tppz) leads to the formation of unexpected complexes [Ru(PPh₃)₂(L²)(CH₃CN)][PF₆]₂; L² = tppz ([9](PF₆)₂), tptz ([11](PF₆)₂) and [Ru(PPh₃)₂(L²)Cl][PF₆]; L² = tppz ([10]PF₆), tptz ([12]PF₆). The complexes were isolated as their hexafluorophosphate salts. They have been characterized on the basis of micro analytical and spectroscopic data. The crystal structures of the representative complexes were established by X‐ray crystallography.     

Spectral, structural and DFT studies of platinum group metal 3,6-bis(2-pyridyl)-4-phenylpyridazine complexes and their ligand bonding modes

Reactions of 3,6-bis(2-pyridyl)-4-phenylpyridazine (L^ph) with [(η⁶-arene)Ru(μ-Cl)Cl]₂ (arene = C₆H₆, p-ⁱPrC₆H₄Me and C₆Me₆), [(η⁵-C₅Me₅)M(μ-Cl)Cl]₂, (M = Rh and Ir) and [(η⁵-Cp)Ru(PPh₃)₂Cl] (Cp = C₅H₅, C₅Me₅ and C₉H₇) afford mononuclear complexes of the type [(η⁶-arene)Ru(L^ph)Cl]PF₆, [(η⁵-C₅Me₅)M(L^ph)Cl]PF₆ and [(Cp)Ru(L^ph)(PPh₃)]PF₆ with different structural motifs depending on the π-acidity of the ligand, electronic properties of the central metal atom and nature of the co-ligands. Complexes [(η⁶-C₆H₆)Ru(L^ph)Cl]PF₆1, [(η⁶-p-ⁱPrC₆H₄Me)Ru(L^ph)Cl]PF₆2, [(η⁵-C₅Me₅)Ir(L^ph)Cl]PF₆5, [(η⁵-Cp)Ru(PPh₃)(L^ph)]PF₆, (Cp = C₅H₅, 6; C₅Me₅, 7; C₉H₇, 8) show the type-A binding mode (see text), while complexes [(η⁶-C₆Me₆)Ru(L^ph)Cl]PF₆3 and [(η⁵-C₅Me₅)Rh(L^ph)Cl]PF₆4 show the type-B binding mode (see text). These differences reflect the more electron-rich character of the [(η⁶-C₆Me₆)Ru(μ-Cl)Cl]₂ and [(η⁵-C₅Me₅)Rh(μ-Cl)Cl]₂ complexes compared to the other starting precursor complexes. Binding modes of the ligand L^ph are determined by ¹H NMR spectroscopy, single-crystal X-ray analysis as well as evidence obtained from the solid-state structures and corroborated by density functional theory calculations. From the systems studied here, it is concluded that the electron density on the central metal atom of these complexes plays an important role in deciding the ligand binding sites.     

Mercury(II) complexes of new bidentate phosphorus ylides: synthesis,spectra and crystal structures

The reaction of dppm (1,1-bis(diphenylphosphino)methane) with 2-bromo-4-phenylacetophenone and benzyl bromoacetate in chloroform produces new phosphonium salts, [Ph₂PCH₂PPh₂CH₂C(O) C₆H₄Ph]Br (I) and [Ph₂PCH₂PPh₂CH₂COOCH₂Ph]Br (II). By allowing the phosphonium salts to react with the appropriate base, the bidentate phosphorus ylides, Ph₂PCH₂PPh₂=C(H)C(O)C₆H₄Ph (III) and Ph₂PCH₂PPh₂=C(H)C(O)OCH₂Ph (IV), were obtained. The reaction of these ligands with mercury(II) halides in dry methanol led to the formation of the mononuclear complexes {HgX₂[(Ph₂PCH₂PPh₂C(H)C(O)C₆H₄Ph)]} (X = Cl (V); X = Br (VI); X = I (VII)) and {HgX₂[(Ph₂PCH₂PPh₂C(H)COOCH₂Ph)]} (X = Cl (VIII); X = Br (IX); X = I (X)). The FTIR and ¹H, ³¹P and ¹³C NMR spectra were studied. The structure of compound III was unequivocally determined by the single-crystal X-ray diffraction technique. Single-crystal X-ray analysis of the {HgBr₂[(Ph₂PCH₂PPh₂C(H)C(O)C₆H₄Me)]} complex (XI) revealed the presence of a mononuclear complex containing the Hg atom in a distorted tetrahedral environment. In all complexes, the ylides referred to above were coordinated through the ylidic carbon and the phosphine atom.     

Darstellung und Kristallstrukturen von Ag[N(CN)2](PPh3)2, Cu[N(CN)2](PPh3)2 und Ag[N(CN)2](PPh3)3

Preparation and Crystal Structures of Ag[N(CN)₂](PPh₃)₂, Cu[N(CN)₂](PPh₃)₂, and Ag[N(CN)₂](PPh₃)₃ The coordination compounds Ag[N(CN)₂](PPh₃)₂ ( 1 ), Cu[N(CN)₂](PPh₃)₂ ( 2 ), and Ag[N(CN)₂](PPh₃)₃ ( 3 ) are obtained by the reaction of AgN(CN)₂ or CuN(CN)₂ with triphenylphosphane in CH₂Cl₂. X‐ray structure determinations were performed on single crystals of 1 , 2 , and 3 · C₆H₅Cl. The three compounds crystallize monoclinic in the space group P2₁/n with the following unit cell parameters. 1 : a = 1216.07(9), b = 1299.5(2), c = 2148.4(3) pm, β = 99.689(13)°, Z = 4; 2 : a = 1369.22(10), b = 1257.29(5), c = 1888.04(15) pm, β = 94.395(7)°, Z = 4; 3 · C₆H₅Cl: a = 1276.6(4), b = 1971.7(3), c = 2141.3(5) pm, β = 98.50(3)°, Z = 4. In all structures the metal atoms have a distorted tetrahedral coordination. The crystal structure of 3 · C₆H₅Cl shows monomeric molecular units with terminal coordinated dicyanamide. The crystal structure of 1 is built up by dinuclear units, which are bridged by dicyanamide ligands. However, the crystal structure of 2 corresponds to a onedimensional coordination polymer, bridged by dicyanamide anions.     

Darstellung und katalytische Eigenschaften von Rhodium(I)-Komplexsalzen des Typs [Rh(COD)o-Py(CH2)2P(Ph)(CH2)3ZR)]PF6 (Z = O,NH)

Preparation and Catalytic Properties of Rhodium(I) Complex Salts of the Type [Rh(COD)(o-Py(CH₂)₂ P(Ph)(CH₂)₃ZR)]PF₆ (Z = O, NH) . In dichloromethane solutions were reacted [Rh(COD)Cl]₂ (COD = cis,cis-1.5-cyclooctadiene) with each of the four new ligands of the type o-Py(CH₂)₂P(Ph)(CH₂)₃ZR in the presence of the halogen scavenger TIPF₆ at 0°C to complex salts [Rh(COD) (o-Py(CH₂)₂P(Ph)(CH₂)₃ZR]PF₆ (ZR = OC₂H₅, I ; OPh, II ; NHPh, III ; NHcyclo? C₆H₁₁, IV ). The Rh¹ complex cation in the obtained compounds I – IV coordinates besides the bedentate COD group the ligand donor atoms P und pyridinic N and the remaining donor atom Z is uncoodinated in an assumed square planar ligand geometry at the Rh central atom. In 1.4 dioxane solutions the complex catalysts I – IV polymerize at 25°C the substrate phenylacetylene (PA) to polyphenylacetylene (PPA): values of TON [h^?1] between 352 ( I ) and 876 ( IV ), and average molecular weights M_w (GPC measurements) between 238 000 ( I ) and 199 900 ( IV ). These given values exhibit a dependency on the ZR group in complexes I – IV . The microstructure of isolated PPA is cis-transoidal. It is formed stereospezific and, based on MNDO calculations, is thermodynamically favoured. For the purpose of comparison, from both the newly synthesized compounds of the type [Rh(COD)DBN- (or DBU)Cl] (DBN = 1.5-Diazabi-cyclo[4.3.0.]non-5-en, DBU = 1.8-Diazabicycl0[5.4.0]- undec-7-en) was obtained a larger value of TON with 1292 (or 1327) [h^?], but a lower value of M, with 166200 (or 131200). These catalysts including I –IV polymerize PA to PPA at a lower reaction temperature with improved selectivity and larger values of M_w as hitherto known catalyst systems.     

β-Methallylrhodium(III) supported on a vanadium oxide cluster: Synthesis,structure, and reaction

Reaction of [(³-C₄H₇)₂Rh(CH₃CN)₂]PF₆(³-C₄H₇ = -methallyl) with [n-Bu₄N](VO₃) gives a new ³-allyl cluster [n-Bu₄N]₂[{(³-C₄H₇)₂Rh}₂ (V₄O₁₂)] (I) which is readily converted into a diene cluster, [n-Bu₄N]₂ [{(⁴-C₈H₁₄)Rh}₂(V₄O₁₂)] (II) (C₈H₁₄=2,5-dimethyl-1,5-hexadiene) by reacting with CO or P(OEt)₃;I andII have been characterized crystallographically.     

Ruthenium(II), rhodium(III) and iridium(III) based effective catalysts for hydrogenation under aerobic conditions

The new cationic mononuclear complexes [(η⁶-arene)Ru(Ph-BIAN)Cl]BF₄ [η⁶-arene = benzene (1), p-cymene (2)], [(η⁵-C₅H₅)Ru(Ph-BIAN)PPh₃]BF₄ (3) and [(η⁵-C₅Me₅)M(Ph-BIAN)Cl]BF₄ [M = Rh (4), Ir (5)] incorporating 1,2-bis(phenylimino)acenaphthene (Ph-BIAN) are reported. The complexes have been fully characterized by analytical and spectral (IR, NMR, FAB-MS, electronic and emission) studies. The molecular structure of the representative iridium complex [(η⁵-C₅Me₅)Ir(Ph-BIAN)Cl]BF₄ has been determined crystallographically. Complexes 1–5 effectively catalyze the reduction of terephthaldehyde in the presence of HCOOH/CH₃COONa in water under aerobic conditions and, among these complexes the rhodium complex [(η⁵-C₅Me₅)Rh(Ph-BIAN)Cl]BF₄ (4) displays the most effective catalytic activity.     

Basische metalle: LVI. Synthese von Li2[(C5Me4)2CH2] und ringverbrückter rhodium-zweikernkomplexe mit dem (C5Me4)2CH2-dianion als brückenliganden

Li₂[(C₅Me₄)₂CH₂] (III), the dilithium salt of the novel permethylated ring-connected [(C₅Me₄)₂CH₂]²⁻ dianion, has been prepared from C₅Me₄H₂ (I) via (C₅Me₄H)₂CH₂ (II) and subsequent reaction with n-BuLi. III reacts with [Rh(C₂H₄)(PMe₃)Cl]₂ to give the dinuclear complex [(C₅Me₄)₂CH₂][Rh(C₂H₄)PMe₃]₂ (IV) from which on methylation the compounds {[(C₅Me₄)₂CH₂][RhCH₃(C₂H₄)PMe₃]₂} (PF₆)₂ (V) and [(C₅Me₄)₂CH₂][RhCH₃(PMe₃)I]₂ (VI) are obtained. Treatment of IV with excess trifluoroacetic acid leads to the formation of [(C₅Me₄)₂CH₂](Rh(PMe₃)(OCOCF₃)₂]₂ (VII) which reacts with chelating diphosphines in the presence of NH₄PF₆ to give the PF₆ salts of the doubly-bridged dications {[(C₅Me₄)₂CH₂][Rh₂(PMe₃)₂(OCOCF₃)₂(μ-P-P)]}²⁺ (PP = dppm, dppe, dppb) (IX–XI). The reaction of III with [Rh(CO)₂Cl]₂ produces a mixture of the dinuclear complexes [(C₅Me₄)₂CH₂][Rh(CO)₂]₂ (XII) and [(C₅Me₄)₂CH₂][Rh₂(μ-CO)₂] (XIII) which are easily interconverted under mild conditions.     

The Synthesis of (η3‐C3H5)Pd{Si[N(tBu)CH]2}Cl and the Catalytic Property for Heck Reaction

Treatment of N‐heterocyclic silylene Si[N(^tBu)CH]₂ ( 1 ) and [(η³‐C₃H₅)PdCl]₂ in toluene led to the formation of the mononuclear complex (η³‐C₃H₅)Pd{Si[N(^tBu)CH]₂}Cl ( 3 ), the silicon analogue to N‐heterocyclic carbene complex (η³‐C₃H₅)Pd{C[N(^tBu)CH]₂}Cl ( 2 ). Complex 3 was characterized with ¹H NMR and ¹³C NMR. Investigation shows that (η³‐C₃H₅)Pd{Si[N(^tBu)CH]₂}Cl is an active catalyst for Heck coupling reaction of styrene with aryl bromides.     

Synthesis and characterization of a cationic oxorhenium(V) complex containing the pentadentate N3O2-donor ligand bis ( N -methylsalicylideneiminopropyl)amine

The complex salt [ReO(bsa)]PF₆ (H₂bsa?=?bis(N-methylsalicylideneiminopropyl)amine) was prepared from the reaction of cis-[ReO₂I(PPh₃)₂] with H₂bsa in toluene. The dianionic pentadentate ligand bsa is coordinated to the ReO³⁺ moiety via one secondary amino and two imino nitrogens, and two anionic phenolate oxygens. The complex was characterized by spectroscopy and analytical data, and the structure has been determined by single-crystal X-ray diffraction analysis.     

The Nitrogen‐Assisted Triphenylphosphine Displacement of 3‐Hydroxypyridine and 3‐Aminopyridine Ligands in Palladium(II) Complexes: Crystal Structures of [Pd(PPh3)Br]2{μ,η2‐C5H3N(OH)}2 and [Pd(PPh3)Br]2{μ,η2‐C5H3N(NH2)}2

Treatment of Pd(PPh₃₎₄ with 2‐bromo‐3‐hydroxypyridine [C₅H₃N(OH)Br] and 3‐amino‐2‐bromopyridine [C₅H₃N(NH₂)Br] in dichloromethane at ambient temperature cause the oxidative addition reaction to produce the palladium complex [Pd(PPh₃₎₂{η¹‐C₅H₃N(OH)}(Br)], 2 and [Pd(PPh₃₎₂{η¹‐C₅H₃N(NH₂)}(Br)], 3 , by substituting two triphenylphosphine ligands, respectively. In dichloromethane solution of complexes 2 and 3 at ambient temperature for 3 days, it undergo displacement of the triphenylphosphine ligand to form the dipalladium complexes [Pd(PPh₃)Br]₂{μ,η²‐C₅H₃N(OH)}₂, 4 and [Pd(PPh₃)Br]₂{μ,η²‐C₅H₃N(NH₂)}₂, 5 , in which the two 3‐hydroxypyridine and 3‐aminopyridine ligands coordinated through carbon to one metal center and bridging the other metal through nitrogen atom, respectively. Complexes 4 and 5 are characterized by X‐ray diffraction analyses.     

Formation of Methane versus Benzene in the Reactions of (C5Me5)2Th(CH3)2 with [CH3PPh3]X (X=Cl,Br, I) Yielding Thorium‐Carbene or Thorium‐Ylide Complexes

The reaction of (C₅Me₅)₂Th(CH₃)₂ with the phosphonium salts [CH₃PPh₃]X (X=Cl, Br, I) was investigated. When X=Br and I, two equivalents of methane are liberated to afford (C₅Me₅)₂Th[CHPPh₃]X, rare terminal phosphorano‐stabilized carbenes with thorium. These complexes feature the shortest thorium–carbon bonds (≈2.30 Å) reported to date, and electronic structure calculations show some degree of multiple bonding. However, when X=Cl, only one equivalent of methane is lost with concomitant formation of benzene from an unstable phosphorus(V) intermediate, yielding (C₅Me₅)₂Th[κ²‐(C,C′)‐(CH₂)(CH₂)PPh₂]Cl. Density functional theory (DFT) investigations of the reaction energy profiles for [CH₃PPh₃]X, X=Cl and I showed that in the case of iodide, thermodynamics prevents the production of benzene and favors formation of the carbene.     

Formation of Methane versus Benzene in the Reactions of (C5Me5)2Th(CH3)2 with [CH3PPh3]X (X=Cl,Br, I) Yielding Thorium‐Carbene or Thorium‐Ylide Complexes

The reaction of (C₅Me₅)₂Th(CH₃)₂ with the phosphonium salts [CH₃PPh₃]X (X=Cl, Br, I) was investigated. When X=Br and I, two equivalents of methane are liberated to afford (C₅Me₅)₂Th[CHPPh₃]X, rare terminal phosphorano‐stabilized carbenes with thorium. These complexes feature the shortest thorium–carbon bonds (≈2.30 Å) reported to date, and electronic structure calculations show some degree of multiple bonding. However, when X=Cl, only one equivalent of methane is lost with concomitant formation of benzene from an unstable phosphorus(V) intermediate, yielding (C₅Me₅)₂Th[κ²‐(C,C′)‐(CH₂)(CH₂)PPh₂]Cl. Density functional theory (DFT) investigations of the reaction energy profiles for [CH₃PPh₃]X, X=Cl and I showed that in the case of iodide, thermodynamics prevents the production of benzene and favors formation of the carbene.     

New series of platinum group metal complexes bearing η- and η-cyclichydrocarbons and Schiff base derived from 2-acetylthiazole: Syntheses and structural studies

The mononuclear complexes [(η⁶-arene)Ru(ata)Cl]PF₆ {ata = 2-acetylthiazole azine; arene = C₆H₆ [(1)PF₆]; p-ⁱPrC₆H₄Me [(2)PF₆]; C₆Me₆ [(3)PF₆]}, [(η⁵-C₅Me₅)M(ata)]PF₆ {M = Rh [(4)PF₆]; Ir [(5)PF₆]} and [(η⁵-Cp)Ru(PPh₃)₂Cl] {η⁵-Cp = η⁵-C₅H₅ [(6)PF₆]; η⁵-C₅Me₅ (Cp^*) [(7)PF₆]; η⁵-C₉H₇ (indenyl); [(8)PF₆]} have been synthesised from the reaction of 2-acetylthiazole azine (ata) and the corresponding dimers [(η⁶-arene)Ru(μ-Cl)Cl]₂, [(η⁵-C₅Me₅)M(μ-Cl)Cl]₂, and [(η⁵-Cp)Ru(PPh₃)₂Cl], respectively. In addition to these complexes a hydrolysed product (9)PF₆, was isolated from complex (4)PF₆ in the process of crystallization. All these complexes are isolated as hexafluorophosphate salts and characterized by IR, NMR, mass spectrometry and UV–Vis spectroscopy. The molecular structures of [2]PF₆ and [9]PF₆ have been established by single-crystal X-ray structure analyses.