Synthesis,crystal structures and magnetic properties of two iron (II) tris(pyridyl)phosphine selenides complexes

We reported the synthesis of tris(pyridyl)phosphine selenide (TppSe) and tris(4-methylpyridin-2-yl)phosphine selenide (MeTppSe), which were prepared by a simple and straightforward one-pot method with red phosphorus in a KOH/DMSO suspension, and treatment of resulted phosphines with selenium in hot toluene. These compounds were characterized by mass spectroscopy, ¹H, ¹³C and ³¹P NMR spectroscopies and the structure of MeTppSe was characterised by a single-crystal X-ray diffraction. Furthermore, The reactions of selenides with Fe(ClO₄)₂·6H₂O afforded two new iron(II) mononuclear metal complexes [Fe(TppSe)₂][ClO₄]₂·3DMF (1) and [Fe(MeTppSe)₂][ClO₄]₂·2DMF (2). Detailed structural analyses and magnetic susceptibility measurements confirm no spin transition from low-spin to the high-spin state between 2 and 300 K in two iron(II) complexes.     

Rhodium carbonyl complexes of thetrans-[RhCl(CO)(PR3)2] type with pyridylphosphines

Summary Trans-[RhCl(CO)(PR₃)₂] complexes [PR₃=tris-(2-pyridyl)phosphine {P(2-pyl)₃}, phenylbis(2-pyridyl)phosphine {PPh(2-pyl)₂} or tris(3-pyridyl)phosphine {P(3-pyl)₃}] have been synthesized and examined by spectroscopic methods (i.r., u.v.-vis,³¹P{¹H} n.m.r.,¹H n.m.r.). In solution the P(2-pyl)₃ and PPh(2-pyl)₂ complexes exhibit equilibrium between the pentacoordinate state, with one of the phosphine molecules coordinated via nitrogen and phosphorus, and complexes with the phosphine coordinated only through nitrogens.     

A Novel Synthesis of AlCl[(NPh)2P(O)H] and SiCl2[(NPh)2P(O)H]: Two New Phosph(V)azane Derivatives

Reactions of phosph(V)azane derivatives of bis(anilino)phosphine oxide (PhNH)₂P(O)H (1) with AlCl₃ and SiCl₄ produce two new phosph(V)azane complexes, AlCl[(NPh)₂P(O)H] (2) and SiCl₂[(NPh)₂P(O)H] (3). In these reactions, an HCl elimination occurs and M─N bonds (M = Si, Al) form directly between a bis(anilino)phosphine oxide ligand with aluminum and silicon halides. The reactions do not require any base to deprotonate the phosphazane ligand. The final products have been fully characterized by means of elemental analysis and IR, MS, and multinuclear NMR (¹H, ¹³C, ³¹P, ²⁷Al, and ²⁹Si) spectroscopy.     

57Fe Mössbauer and 31P NMR Spectroscopic Characterisation of Fe(CO)3L2 Complexes (L=Phosphite and Phosphine)

Abstract

A series of mixed ligand complexes of the type [Fe(CO)₃L¹L²] (L¹=tri-phenylphosphite and L²=phosphine or phosphite) have been prepared to study the Fe-P bond. The ⁵⁷Fe Mössbauer spectra of trans-[Fe(CO)₃L¹L²] showed a quadrupole splitting doublet characteristic of the disubstituted iron carbonyls in trigonal bipyramidal symmetry. The linear dependence of the quadrupole splittings on the isomer shifts with a positive slope has revealed that the iron-to-phosphorus σ-donation is offset by the phosphorus-to-iron π-back donation. The ³¹P{¹H} NMR spectra showed a couple of doublets assigned to the coordinated phosphite and the coordinated phosphine. The doublet of the phosphite site was generally observed at the down field compared with that of the phosphine site. The coordination shifts increase with the Mössbauer isomer shifts, suggesting that the iron-to-phosphorus π-back donation plays an important role in the Fe-P bond of trans-[Fe(CO)₃L¹L²]. The relatively large coupling constants due to ²J(P,P) have demonstrated that there exists a strong interaction between trans phosphorus ligands through the d_π orbitals of the central iron. The coupling constant is a measure of the bond strength between Fe-P, while the Mössbauer isomer shift reflects the electron density at the iron nucleus. Thus, a linear correlation has been established between these two spectroscopic parameters.     

Gold(I) Complexation with Trialkyl/Triaryl Phosphine Selenide Ligands

Abstract

A number of phosphine selenide ligands and their gold(I) complexes of general formula R₃P?Se?Au?X (where X is Cl^?, Br^? and CN^? and R = phenyl, cyclohexyl and tolyl) were prepared. The complexes were characterized by elemental analysis, IR and ³¹P NMR spectroscopic methods. In the IR spectra of all complexes a decrease in frequency of P?Se bond upon coordination was observed, indicating a decrease in P?Se bond order. ³¹P NMR showed that the electronegativity of the substituents is the most important factor determining the ³¹P NMR chemical shift. It was observed that phosphorus resonance is more downfield in alkyl substituted phosphine selenides, as compared to the aryl substituted ones. Ligand disproportionation in the complex Cy₃P?SeAuCN in solution to form [Au(CN)₂]^? and [(Cy₃P?Se)₂Au]⁺ was investigated by ¹³C and ¹⁵N NMR spectroscopy.     

Synthesis,characterization, and solution behavior of mercury(II) chloride complexes with phosphine tellurides

The reaction of mercury(II) chloride with neutral phosphine telluride ligands (R₃PTe) produced new mercury(II) complexes, HgCl₂(R₃PTe)₂ [R = Me₂N (1), Et₂N (2), C₄H₈N (3), C₅H₁₀N (4) or ^n-Bu (5)]. Attempts to isolate the complex of HgCl₂ with the morpholinyl ligand, (OC₄H₈N)₃PTe, were unsuccessful. Complexes 1–5 have been characterized by elemental analyses, IR, and multinuclear (³¹P, ¹²⁵Te, and ¹⁹⁹Hg) NMR spectroscopy. The solution behavior of the complexes was investigated using variable temperature NMR spectroscopy in the presence of excess ligand and indicated fast ligand exchange on the NMR timescale at room temperature. The metal–ligand exchange barriers in these complexes were estimated to be in the range 8–11 kcal/mol. The results suggest that a slight change in the nature of the substituents on the phosphorus of the ligand can contribute considerably to the lability of the complex obtained. The NMR data are discussed and compared with those obtained for related phosphine chalcogenide systems.     

Synthesis and Characterization of a Novel Phosph(V)azane-Tin(IV) Complex

Abstract

The reaction of bis(anilino)phosphine oxide (C₆H₅NH)₂P(O)H, 1 with Bu₂ ⁿSnCl₂ in the presence of an excess of triethylamine (TEA) in dry tetrahydrofurane (THF) yields the novel N,O-bonded tin complex Bu₂ ⁿSn[NPh(O)P(H)NPh(HNEt₃)]₂, 2. TEA is used as a base to deprotonate the phosphazane ligand and is separated as Et₃NH⁺Cl^?, whereas HTEA⁺ exists in the final product 2 and act as a charge balancing and H-bond structure–directing agent. This new compound has been fully characterized by means of IR, MS, and multinuclear (¹H, ³¹P, and ¹¹⁹Sn NMR) spectroscopy.     

Facile synthesis,X-ray analysis,and spectroscopic studies of di-iron propanedithiolate complexes with tris(aromatic)phosphine ligands

Three new propanedithiolate-type iron–sulfur complexes containing tris(aromatic)phosphine ligands, [{(μ-SCH₂)₂CH₂}Fe₂(CO)₅L] (L?=?P(PhOMe-p)₃, 1; P(PhMe-p)₃, 2; P(PhF-p)₃, 3), have been prepared through carbonyl substitution in the presence of Me₃NO. The new complexes 1–3 were characterized by elemental analysis, IR, ¹H, ¹³C{¹H}, and ³¹P{H} NMR spectra. The molecular structures of 1–3 were unequivocally determined by single crystal X-ray diffraction, in which the tris(aromatic)phosphine coordinated to Fe resides in an apical position of the pseudo-square-pyramidal geometry. IR spectroscopy and X-ray crystallographic analysis for 1–3 have indicated that the highly electron rich tris(aromatic)phosphine ligands (where the corresponding electron-donating abilities display the following order of P(PhOMe-p)₃?>?P(PhMe-p)₃?>?P(PhF-p)₃) result in a considerable red shift of the CO-stretching frequencies and a clear change of the Fe–Fe bond distances in 1–3.     

Intramolecular Diastereoselective Cascade Cyclization Reaction of N,N′-Bis(Salicylidene)Cyclohexanediimine with Phosphoryltrichloride to a Bis(Chlorophosphorylated) Decahydro-2,4-DI (2-Hydroxyphenyl)Benzo[d][1,3,6]oxadiazepine

Abstract

A new type of cascade cyclization was observed in the phosphorylation reaction of (R,R)- or (S,S)-N,N′-bis(salicylidene)cyclohexanediimine with phosphoryltrichloride, which resulted in the formation of bis(chlorophosphorylated) decahydro-2,4-di(2-hydroxyphenyl)benzo[d][1,3,6]oxadiazepine with two new stereogenic phosphorus atoms and two new stereogenic carbon atoms in the oxadiazepine ring in the β-position to phosphorus. During the synthesis, the N atom attacks the phosphorodichloridate group with the formation of the P–N bond to give an asymmetric phosphorus atom and an iminium ion. This compound with six stereogenic centers crystallizes in the monoclinic centrosymmetric space group P2₁/c and the crystal structure together with solution and solid-state MAS ¹³C and ³¹P NMR studies reveals a preferential formation of stereoisomers.     

NMR studies of dynamic behavior of dialkyl(acetylacetonato)bis(tertiary phosphine)cobalt(III) and related complexes in solution

The ¹H, ³¹P and ¹³C NMR spectra of cis-dialkyl(acetylacetonato)bis(tertiary phosphine)cobalt(III) complexes were obtained in several solvents. These complexes have an octahedral configuration with trans tertiary phosphine ligands. The coordinated tertiary phosphine ligands are partly dissociated in solution. One of the phosphine ligands in CoR₂(acac)(PR₃′)₂ can be readily displaced with pyridine bases to give pyridine-coordinated complexes. From observation of the ¹H and ³¹P NMR spectra several kinetic and thermodynamic data for exchange reactions and displacement reactions of tertiary phosphines were obtained.     

Synthesis and Characterization of a Novel Phosph(V)azane-Platinum(II) Complex

The substitution reaction of bis(anilino)phosphine oxide (C ₆ H ₅ NH) ₂ P(O)H (1) with trans-PtCl ₂ (SEt ₂ ) ₂ yields the novel unprecedented phosph(V)azane-platinum complex cis-Pt(SEt ₂ ) ₂ Cl[HNPhP(O)NPh(HNEt ₃ )] (3). In this reaction, the bis(anilino)phosphine oxide undergoes P–H activation and a Pt(II)–P(V) bond instead of Pt–N bond forms. ³¹ P NMR spectra readily distinguish between the “N” and “P” bonding modes. The reaction requires the presence of triethylamine (TEA) as a base in order to deprotonate the phosphazane ligand and is separated as Et ₃ NH⁺Cl^?, whereas HTEA⁺ exists in the final product 3 and is acting as charge balancing and H-bond structure directing agent. The products have been fully characterized by means of IR; MS; UV-Vis; and ¹ H, ¹³ C, and ³¹ P NMR spectroscopy.     

Reaction of oxygen with a binuclear cobalt(II) hexaphosphine complex. Single-crystal X-ray structure of an extended chain cobalt(II) hexaphosphine oxide system

Molecular oxygen reacts rapidly with Co₂Cl_4-x,(eHTP)^x+ [x = 0 or 2; eHTP = (Et₂PCH₂CH₂)₂PCH₂P(CH₂CH₂PEt₂)₂] in dry acetonitrile to produce in approximately 66% yield the fully-oxygenated phosphine oxide eHTP (eHTPO) Co(II) complex [Co(eHTPO)²⁺][CoCl₄²⁻. The X-ray structure on this novel system shows an extended chain system in which the monomeric repeating unit has an octahedral Co(II) centre. The eHTPO ligand is adopting an unusual conformation with the phosphine oxide groups P(2)P(1)P(3) (P(1) is one of the internal phosphorus atoms) forming a P(1)P(2) chelate to the metal atom while P(3) bridges to another Co(eHTPO)²⁺ monomer unit making up the extended chain, instead of acting as an independent bis chelating group. The third unique coordination site on the cobalt centre is occupied by a phosphine oxide group from the other half of the eHTPO ligand which bridges over to the cobalt centre forming a facial set of three PO donor ligands. This mixed bridging/chelating conformation gives rise to fused seven- and nine-membered ring systems with a CoCo separation of 7.613(0) Å between symmetry related cobalt sites on the extended chain. This structure is the first reported for a Co(R₃PO)₆ⁿ⁺ (R = alkyl, phenyl) system.     

Cadmium(II) complexes with phosphine tellurides: synthesis and multinuclear (31P, 125Te,and 113Cd) NMR characterization in solution

New cadmium(II) complexes with phosphine telluride ligands of the type CdX₂(R₃PTe)_n [X?=?ClO₄^?, n?=?4: R?=?n-Bu (1), Me₂?N (2), C₅H₁₀?N (3), C₄H₈?N (4) or OC₄H₈?N (5); X?=?Cl^–, n?=?2: R?=?n-Bu (6), Me₂?N (7), C₅H₁₀?N (8), C₄H₈?N (9) or OC₄H₈?N (10)] have been synthesized and characterized by elemental analyses, IR and multinuclear (³¹P, ¹²⁵Te, and ¹¹³Cd) NMR spectroscopy. In particular, the solution structures of these complexes were confirmed by ¹¹³Cd NMR at low temperature, which displays a quintuplet for each of the perchlorate complexes and a triplet for each of the chloride complexes due to coupling with four and two equivalent phosphorus atoms, respectively, indicating a four-coordinate tetrahedral geometry for the metal center. These multiplet features were further accompanied by one bond Te–Cd couplings, clearly showing that the ligand is coordinated to the metal through tellurium. The results are discussed and compared with those obtained for closely related phosphine chalcogenide analogs.     

Interaction of Tris(3-Hydroxymethyl)Phosphine with Cinnamic Acids

Abstract

Phosphonium zwitterions of the known type R₃P⁺CH(Ar)CH₂CO₂ ^? (II) are obtained as a racemic mixture in moderate yield via a 1:1 reaction of cinnamic acids (Ar = phenyl, or substituted phenyl) with [HO(CH₂)₃]₃P in acetone at room temperature under Ar. The products are characterized by elemental analysis, ³¹P{¹H}-, ¹H-, and ¹³C{¹H}-NMR spectroscopies, and mass spectrometry, although they contain a minor coproduct formed via neutralization of the positive and negative charges of II with the respective acid and phosphine reactants (see Experimental Section). In CD₃OD, the monodeuterated salts R₃P⁺CH(Ar)CH(D)CO₂ ^? are formed as a mixture of diastereomers with d.r. values of ～2 to 8, depending on substituent groups present in the organic acid; in these studies, 2-HO-cinnamic acid is the most reactive, and β-methylcinnamic acid is the least reactive.     

Synthesis and reactivity of [(RRN)2PH]Fe(CO)4 complexes. X-ray crystal structure of [(Ph2N)2PH]Fe(CO)4

KHFe(CO)₄ reacts with tris(amino)phosphines by substitution at phosphorus leading to [bis(amino)phosphine]tetracarbonyliron complexes [(R¹R²N)₂PH]Fe(CO)₄. The X-ray structure has been determined for R¹=R²=Ph. Deprotonation of these complexes with KH affords stable potassium phosphidotetracarbonylferrates which can be alkylated or acylated at phosphorus.     

Reaction of diphenyl[2-(triethoxysilyl)ethyl]phosphine oxide with boron trifluoride etherate

Diphenyl[2-(trifluorosilyl)ethyl]phosphine oxide was synthesized by the reaction of diphenyl[2-(triethoxysilyl)ethyl]phosphine oxide with boron trifluoride etherate. As shown by the ¹H, ¹³C, ¹⁹F, ³¹P, ²⁹Si multinuclear NMR spectroscopy data, the silicon atom in the molecule is tetracoordinate. The absence of P=O→Si interaction in diphenyl[2-(trifluorosilyl)ethyl]phosphine oxide, as follows from the comparison of the calculated [GIAO B3LYP/6-311++G(2d,p)] and experimental δ(²⁹Si) and δ(³¹P) values, is due to the formation of complex with BF₃ by the phosphoryl oxygen.     

Preparation of complexes formed in the reaction between diironnanocarbonyl and tetraalkyl(phenyl)diphosphine disulfides,R2P(S)P(S)R2 (R=Et,n -Pr,n -Bu,Ph)

Fe₂(CO)₉ and R₂P(S)P(S)R₂ (R = Et, n-Pr, n-Bu, Ph) react to form two types of cluster complexes Fe₃(CO)₉(μ₃-S)₂ (1), Fe₂(CO)₆(μ-SPR₂)₂ (2A)–(2D), [2A, R = Et; 2B, R = n-Pr; 2C, R = n-Bu; 2D, R = Ph]. The complexes result from phosphorus–phosphorus bond scission; in the former sulfur abstraction has also occurred. The complexes have been characterized by elemental analyses, FT-IR and ³¹P-[¹H]-NMR spectroscopy and mass spectrometry.     

Ruthenium(II) carbonyl complexes of P,P and P,O donor diphosphine ligands,Ph2P(CH2)nPPh2 and Ph2P(CH2)nP(O)Ph2, n = 2, 3 and their activities in catalytic transfer hydrogenation reactions

The polymeric precursor [RuCl₂(CO)₂]_n reacts with the ligands, P∩P (a, b) and P∩O (c, d), in 1:1 M ratio to generate six-coordinate complexes [RuCl₂(CO)₂(?²-P∩P)] (1a, 1b) and [RuCl₂(CO)₂(?²-P∩O)] (1c, 1d), where P∩P: Ph₂P(CH₂)_nPPh₂, n = 2(a), 3(b); P∩O: Ph₂P(CH₂)_nP(O)Ph₂, n = 2(c), 3(d). The complexes are characterized by elemental analyses, mass spectrometry, thermal studies, IR, and NMR spectroscopy. 1a–1d are active in catalyzed transfer hydrogenation of acetophenone and its derivatives to corresponding alcohols with turnover frequency (TOF) of 75–290 h^?1. The complexes exhibit higher yield of hydrogenation products than catalyzed by RuCl₃ itself. Among 1a–1d, the Ru(II) complexes of bidentate phosphine (1a, 1b) show higher efficiency than their monoxide analogs (1c, 1d). However, the recycling experiments with the catalysts for hydrogenation of 4-nitroacetophenone exhibit a different trend in which the catalytic activities of 1a, 1b, and 1d decrease considerably, while 1c shows similar activity during the second run.     

Synthesis of cationic gold(III) complexes using iodine(III)

Abstract

We report the synthesis and characterization of cationic Au(III) complexes supported by nitrogen-based ligands. The syntheses are achieved by reacting Au(I) complexes [Au(N-Me-imidazole)₂]⁺ and [Au(pyridine)(NHC)]⁺ with iodine(III) reagents PhI(OTf)(OAc) and [PhI(pyridine)₂]²⁺ yielding a series of cationic gold(III) complexes. In contrast, reactions of phosphine ligated gold(I) complexes with iodine(III) reagents results in the oxidation of the phosphine ligand.     

Two Cd(II) coordination polymers based on tris(p-carboxylphenyl)phosphine oxide accompanied by in situ ligand formation

Two Cd(II) coordination polymers constructed from tris(p-carboxylphenyl)phosphine oxide (H₃TPO), [Cd(HTPO)(1,4-bix)·3H₂O]_n (1) and [Cd₂(HTPO)(HBPO)(H₂O)₂]_n (2) (1,4-bix = 1,4-bis(imidazol-1-ylmethyl)benzene, H₃BPO = bis(4-carboxylphenyl)phosphinic acid), were synthesized and identified by IR, elemental analysis, and single-crystal X-ray diffraction analysis. The 1,4-bix ligand leads to 1 as a ladder-like 1D chain structure. In 2, adjacent Cd₂ units are bridged by HBPO^2– and HTPO^2– ligands to form a 3D structure. The H₃BPO ligand is formed from the in situ reaction of H₃TPO. It is the first example from hydrated Cd(II) salt promoting partial hydrolysis of a phosphine oxide ligand. The thermal behavior and solid-state photoluminescence properties correlated with the corresponding structural features were investigated.