反离子对氟表面活性剂的影响1. 表面活性及胶团化作用

通过表面张力和荧光探针法研究了全氟辛酸钠、全氟辛酸铵以及全氟辛酸四烷基铵[C₇F₁₅COON(C_nH_2n+1)₄, n＝1, 2, 3, 4]的表面活性以及胶团化作用, 系统地讨论了各种反离子, 特别是反离子大小的影响. 结果表明, 与普通碳氢表面活性剂不同, 反离子对这类氟表面活性剂的表面活性以及胶团化作用有很大影响. 表面活性剂的临界胶束浓度(cmc)随反离子的增大而下降; 饱和吸附层中平均每个分子所占的面积则大致随反离子的增大而增大. 而表面张力的变化则较为复杂. cmc时的表面张力随反离子的增大先上升(从全氟辛酸铵到全氟辛酸四乙铵)后下降(从全氟辛酸四乙铵到全氟辛酸四丁铵). 通过反离子的空间位阻、疏水性、插入以及电荷屏蔽效应对上述结果做了解释.     

Interaction of Nonionic Surfactant Triton-X-100 with Ionic Surfactants

The interaction in two mixtures of a nonionic surfactant Triton-X-100 (TX-100) and different ionic surfactants was investigated. The two mixtures were TX-100/sodium dodecyl sulfate (SDS) and TX-100/cetyltrimethylammonium bromide (CTAB) at molar fraction of TX-100, α_TX-100 = 0.6. The surface properties of the surfactants, critical micelle concentration (CMC), effectiveness of surface tension reduction (γ_CMC), maximum surface excess concentration (Γ_max), and minimum area per molecule at the air/solution interface (A _min) were determined for both individual surfactants and their mixtures. The significant deviations from ideal behavior (attractive interactions) of the nonionic/ionic surfactant mixtures were also determined. Mixtures of both TX-100/SDS and TX-100/CTAB exhibited synergism in surface tension reduction efficiency and mixed micelle formation, but neither exhibited synergism in surface tension reduction effectiveness.     

Synthesis and Evaluation of Some Schiff Base Surfactants for Treating Crude Oil Emulsions

Water soluble nonionic surfactants based on Schiff base monomers were prepared by their etherification with β,^` β- dichlorodiethylether and PEG 400 in presence of NaOH. The surface properties of the prepared surfactants were determined by measuring the surface tension at different temperatures. The prepared nonionic surfactants were evaluated as demulsifiers for synthetic water in crude-oil emulsions that were pronounced at different ratios of crude oil: water at 45°C and 60°C. The experimental results showed that the dehydration rate of the prepared demulsifiers reached 90% and 100% at some concentrations.     

Novel highly fluorinated sulfamates: synthesis and evaluation of their surfactant properties

Two synthetic pathways have been elaborated to prepare new series of highly fluorinated sulfamates with excellent yields. Surface tension measurements at the air/water interface showed that these compounds constitute new excellent non-ionic surfactants exhibiting high surface activity in the range of the best non-ionic fluoro surfactants already described in the literature. The most important feature of this work is that, in comparison with the classical non-ionic fluoro surfactants, these sulfamates are easily synthesized in a monodisperse form from classical and relatively non-toxic starting materials. The critical micelle concentration (CMC), the maximum surface excess concentration (Γ) and the minimum area per molecule (a) have been calculated from the surface tension measurements on surfactant aqueous solutions. Relationships have been established between the length of both the fluorinated tail and hydrocarbon spacer linking the hydrophobic tail to the hydrophilic head, and the interfacial properties.     

Synthesis and combined properties of novel fluorinated cationic surfactants derived from hexafluoropropylene dimer

Three novel fluorinated surfactants with branched short fluorinated tails as hydrophobic groups, ammonium oxide as polar groups are prepared. Surface tension measurement shows that these fluorinated surfactants are ideal compounds to design new formulations in fire-fighting field.     

Effect of Surfactants on the Formation,Morphology, and Surface Property of Synthesized SiO2 Nanoparticles

Abstract

This study investigated the effect of cationic, anionic (saturated and unsaturated), and nonionic surfactants on the formation, morphology, and surface properties of silica nanoparticles synthesized by the ammonium‐catalyzed hydrolysis of tetraethoxysilane in alcoholic media. Results indicate that at a relatively low surfactant concentration (1 × 10^?3–1 × 10^?6 M), cationic surfactants significantly affected the growth of silica particles as measured by dynamic light scattering and transmission electron microscopic analyses. In contrast, the anionic and nonionic surfactants showed relatively minor effects in the low concentration range. The magnitude of negative zeta potential was reduced for silica colloids that were synthesized in the presence of cationic surfactant because of charge neutralization. The presence of anionic surfactants only slightly increased the negative zeta potential while the nonionic surfactant showed no obvious effects. At high surfactant concentrations (>1 × 10^?3 M), cationic and anionic surfactants both induced colloid aggregation, while the nonionic surfactant showed no effect on particle size. Raman spectroscopic analysis suggests that molecules of cationic surfactants adsorb on silica surfaces via head groups, aided by favorable electrostatic attraction, while molecules of anionic and nonionic surfactants adsorb via their hydrophobic tails.     

Interaction of Fluorocarbon Containing Hydrophobically Modified Polyelectrolyte with Nonionic Surfactants

ＩｎｔｒｏｄｕｃｔｉｏｎＷａｔｅｒ ｓｏｌｕｂｌｅｐｏｌｙｍｅｒｓｈａｖｅｇａｉｎｅｄｃｏｎｓｉｄｅｒａｂｌｅａｔ ｔｅｎｔｉｏｎｉｎｔｈｅｐａｓｔｄｅｃａｄｅｓｂｅｃａｕｓｅｏｆｔｈｅｉｒｗｉｄｅｌｙｉｎｄｕｓ ｔｒｉａｌａｐｐｌｉｃａｔｉｏｎｓａｎｄｆｒｉｅｎｄｌｉｎｅｓｓｔｏｅｎｖｉｒｏｎｍｅｎｔ .1 3Ｅｓｐｅ ｃｉａｌｌｙｈｙｄｒｏｐｈｏｂｉｃａｌｌｙｍｏｄｉｆｉｅｄｗａｔｅｒ ｓｏｌｕｂｌｅｐｏｌｙｍｅｒｓ(ＨＭＷＳＰ)ｗｈｉｃｈｂｅａｒａｓｍａｌｌａｍｏｕｎｔｏｆｈｙｄｒｏｐｈｏｂｅｓｏｎｔ…     

Interfacial Properties of Aqueous Nonionic Fluorocarbon Surfactant Solutions

The equilibrium, dynamic surface tensions, and surface dilatational elasticity of aqueous solutions of nonionic fluorocarbon surfactant are reported. The critical micellar concentration, CMC (0.023 mM) and equilibrium surface tension (24.6 m N . m^?1) at CMC were measured by Wilhelmy plate method for aqueous solution of C₈F₁₇SO₂N(C₃H₇)(C₂H₄O)_nH (n=20), abbreviated as EF122A. The surface tension decay is slower for C₈F₁₇SO₂N(C₃H₇)(C₂H₄O)_nH (n=10) system, abbreviated as EF122B compared to the EF122A system over short time region, which indicates the slow transport of the surfactant molecules to the surface. The relaxation time for surface tension decay is estimated by fitting a series of exponentials to the dynamic surface tension data and it decreases with temperature for EF122A. Slow exchange of monomers between bulk and interface is reflected in the high elasticity value of the air‐liquid interface for EF122B compared with EF122A within measured frequency window (0.125–1.25 Hz).     

Promoting Efficacy and Environmental Safety of Pesticide Synergists via Non-Ionic Gemini Surfactants with Short Fluorocarbon Chains

Improving the utilization rate of pesticides is key to achieve a reduction and synergism, and adding appropriate surfactant to pesticide preparation is an effective way to improve pesticide utilization. Fluorinated surfactants have excellent surface activity, thermal and chemical stability, but long-chain linear perfluoroalkyl derivatives are highly toxic, obvious persistence and high bioaccumulation in the environment. Therefore, new strategies for designing fluorinated surfactants which combine excellent surface activity and environmental safety would be useful. In this study, four non-ionic gemini surfactants with short fluorocarbon chains were synthesized. The surface activities of the resulting surfactants were assessed on the basis of equilibrium surface tension, dynamic surface tension, and contact angle. Compared with their monomeric counterparts, the gemini surfactants had markedly lower critical micelle concentrations and higher diffusivities, as well as better wetting abilities. We selected a single-chain surfactant and a gemini surfactant with good surface activities as synergists for the glyphosate water agent. Both surfactants clearly improved the efficacy of the herbicide, but the gemini surfactant had a significantly greater effect than the single-chain surfactant. An acute toxicity test indicated that the gemini surfactant showed slight toxicity to rats.     

Application of New Modified Poly(ethylene Oxide)-Block-Poly(propylene oxide)-Block-Poly(ethylene oxide) Copolymers as Demulsifier for Petroleum Crude Oil Emulsion

Water soluble nonionic amphiphilic block copolymers based on hydrophilic poly(ethylene glycol) (PEG) and hydrophobic poly(propylene glycol) (PPG) were prepared. Poly(ethylene glycol)-block-poly(propylene glycol)-block-poly(ethylene glycol) copolymers, PEG-PPG-PEG, were prepared in the normal condition. The chemical composition and molecular weights of the prepared copolymers were determined from ¹H NMR and GPC techniques. The surface properties of the prepared surfactants were determined by measuring the surface tension at different temperatures. The prepared nonionic surfactants were evaluated as demulsifiers for water in crude-oil emulsions that were pronounced at different ratios of crude oil: water at 318 K and 333 K. The experimental results showed that the dehydration rate of the prepared demulsifiers reached 100% based on demulsifier chemical compositions and concentrations.     

Adsorption of Some Surfactants onto Polyvinyl Alcohol as Hydrophobic Polymer Surface

The adsorption of different types of nonionic and anionic surfactants from aqueous solutions onto polyvinyl alcohol has been studied at different temperatures using surface tension measurements. The nonionic surfactants show Langmuirian L-shape isotherms whereas the adsorption isotherms of the anionic surfactants exhibit segmoidal shape. The experimental adsorption isotherms could be fitted to the Langmuir equation and the values of Γ_max and A_min have been calculated. The effect of temperature on the adsorption process as well as on both efficiency and effectiveness of adsorption has been studied.     

Preparation and Evaluation of Monodisperse Nonionic Surfactants Based on Fluorine-Containing Dicarbamates

Novel bipodal surfactants of fluorine-containing carbamate type were synthesized with satisfactory yields from the action of fluorinated diisocyanates on oligooxyethylmonomethylated ethers without solvent. The synthetic pathways via malonic intermediates were elaborated in order to use low-price commercially available compounds such as 2-F-alkylethyl iodides and oligooxyethylmonomethylated ethers as starting materials. This new class of nonionic surfactants contains one hydrophobic part and one oleophobic part, and shows peculiar properties due to the presence of two hydrophilic parts (bipodal). All these compounds are monodisperse, i.e, include a perfectly defined number of oxyethylene units. Compared with their bipodal homologues previously described within the F-alkylated series, these new structures were easily obtained from commercial raw materials and are stable against pH media. The evaluation of their behavior at the air-water interface has been studied by measurements of surface tension versus concentration. This allows us to show clearly the variation of the critical micelle concentration (cmc) from 1.1x10(-5) to 9.8x10(-3) mol.l(-1), and of the surface area per surfactant molecule versus studied structures. The dicarbamates of oligooxyethylmonomethylether of 3-(F-alkyl)propyl so realized exhibit noteworthy properties as nonionic fluorinated surfactants. Copyright 2000 Academic Press.     

Rheological properties of the aqueous solution for fluorocarbon‐containing hydrophobically modified sodium polyacrylic acid with various surfactants

The interaction of fluorocarbon‐ containing hydrophobically modified sodium polyacrylic acid (FMPAANa) (0.5 wt%) with various surfactants (anionic, nonionic and cationic) has been investigated by rheological measurements. Different rheological behaviors are displayed for ionic surfactants and nonionic surfactants. Fluorinated surfactants have stronger affinity with polyelectrolyte hydrophobes comparing with hydrogenated surfactants. The hydrophobic association of FMPAANa with a cationic surfactant (CTAB) and a fluorinated nonionic surfactant (FC171) is much stronger than with a nonionic surfactant (NP7. 5) and an anionic surfactant (FC143). Further investigation of the effects of temperature on solution properties shows that the dissociation energy E_m is correlated to the strength of the aggregated junctions.     

Synthesis and properties of novel fluorinated polyurethane based on fluorinated gemini diol

In the current study, the novel fluorinated polyurethanes (FPUs) that contained the gemini branched fluoroether side groups on the hard segments were developed. In brief, to obtain these FPUs, a new class of fluorinated gemini diol with double‐branched fluoroether side groups was first synthesized and characterized by using Fourier transform infrared spectroscopy, nuclear magnetic resonance, and mass spectrometry. Subsequently, a series of FPUs were designed and prepared by using hexamethylene diisocyanate, poly (tetramethylene oxide glycol), 1,4‐butanediol, and fluorinated gemini diol. Analysis of the FPUs' surface properties from contact angle analysis indicated that the water contact angle increased from 81° to more than 120° when the content of fluorinated gemini diol was increased. Differential scanning calorimetry results revealed that introduction of fluorinated gemini dio decreased the T_g of FPUs, causing a better phase separation. Results from thermogravimetric analysis studies indicated the thermal stability of FPUs was improved. Scanning electron microscopy and energy dispersive X‐ray spectroscopy revealed that fluoroether groups migrate to and enrich on the outmost surface of FPUs.     

Synthesis of a novel type of hybrid fluorocarbon ionic surfactants containing polyoxyethlene chain

A novel type of hybrid ionic surfactants containing oxyethylene chain and fluorocarbon chain in one molecule, n-C₈F₁₇SO₃⁻N⁺(C₂H₅)₃(CH₂CH₂O)_nH (n = 4.0, ∼4.1, 8.7, 13.2, 17.8, 22.3), were prepared. The compounds were achieved from the reaction of polyethylene glycol and perfluorooctanesulfonyl fluoride in the presence of Et₃N. The evaluation of their behavior at the air-water interface has been studied from measurements of surface tension versus variation of concentration, and the properties of the hybrid surfactants are not consistent with the empirical rule observed from the fluorinated nonionic surfactant.     

Polymers as Hydrophobic Adsorbent Surface for Some Surfactants

Polyvinyl alcohol (PVA) and polyacrilic acid (PAA) were used as hydrophobic adsorbent surfaces at 25°C for two nonionic surfactants, namely, tetradecyl polyoxyethylenated monolaurate [La(EO)₁₄] and tetradecyl polyoxyethylenated monooleate [Ol(EO)₁₄], and two anionic surfactants, namely, sodium oleic sulfonate [OlSO₃Na] and sodium dodecyl benzene sulfonate [SDBS]. Surface tension measurements were performed to determine the critical micelle concentration (CMC) and the adsorption isotherms of the tested surfactants. All the tested surfactants display L-shape isotherms except that of OlSO₃Na onto PVA. No adsorption behavior has been shown for the anionic SDBS onto both PVA and PAA. The adsorption data show higher adsorption affinity for all the tested nonionic surfactants onto PAA than onto PVA while the investigated anionic surfactant OlSO₃Na possesses close values of Γ_max. The study reveals that the nature of the polymer surface as adsorbent besides the molecular structure of the surfactant defined the types and mechanisms of adsorption.     

Micellization and Adsorption Parameters of Nonionic Polymeric Surfactants from Poly(ethylene terephthalate) Waste

Poly (ethylene terephthalate), PET, waste was recycled to oligomers in the presence of triethanolamine and manganese acetate as a catalyst. The produced oligomers were reacted with stearic acid and polyethylene glycol having different molecular weights 400, 1000, and 4000 to produce nonionic polymeric surfactants having different hydrophile‐hydrophobe balances (HLB). The surface tension, critical micelle concentration (CMC) and surface activities were determined at different temperatures. Surface parameters such as, surface excess concentration Γ_max, the area per molecule at interface A_min and the effectiveness of surface tension reduction (Π_CMC) were determined from the adsorption isotherms of the prepared surfactants. Some thermodynamic data for the adsorption process are calculated and discussed.     

Interaction between polymer and anionic/nonionic surfactants and its mechanism of enhanced oil recovery

Various experimental methods were used to investigate interaction between polymer and anionic/nonionic surfactants and mechanisms of enhanced oil recovery by anionic/nonionic surfactants in the present paper. The complex surfactant molecules are adsorbed in the mixed micelles or aggregates formed by the hydrophobic association of hydrophobic groups of polymers, making the surfactant molecules at oil-water interface reduce and the value of interfacial tension between oil and water increase. A dense spatial network structure is formed by the interaction between the mixed aggregates and hydrophobic groups of the polymer molecular chains, making the hydrodynamic volume of the aggregates and the viscosity of the polymer solution increase. Because of the formation of the mixed adsorption layer at oil and water interface by synergistic effect, ultra-low interfacial tension (～2.0?×?10^?3 mN/m) can be achieved between the novel surfactant system and the oil samples in this paper. Because of hydrophobic interaction, wettability alteration of oil-wet surface was induced by the adsorption of the surfactant system on the solid surface. Moreover, the studied surfactant system had a certain degree of spontaneous emulsification ability (D50?=?25.04?µm) and was well emulsified with crude oil after the mechanical oscillation (D50?=?4.27?µm).     

Synthesis and properties of mesogenic laterally fluorinated compounds containing benzoxazole unit

Series of mesogenic laterally fluorinated compounds, 2-(2′,3′-difluoro-4′-alkoxybiphenyl-4-yl)-benzoxazole derivatives (nB-Fx) bearing different substituents (H, CH₃, Cl, NO₂, coded as nB-FH, nB-FM, nB-FC and nB-FN, respectively) at 5-position, were prepared and characterised. Their phase transition behaviour was investigated by differential scanning calorimetry and polarising optical microscopy. nB-Fx with alkoxy chain lengths of 2 to 10 carbons exhibited enantiotropic mesophases, for which the mesophase ranges were 0°C–58°C and 0°C–71°C on heating and cooling for nB-FH, 41°C–93°C and 66°C–140°C for nB-FM, 44°C–133°C and 87°C–155°C for nB-FC, and 0°C–76°C and 0°C–95°C for nB-FN, respectively. Compared to non-fluorinated analogues, with the exception of nB-FC, fluorinated nB-Fx mainly exhibited nematic mesophase both in heating and cooling, which were attributed to the disruption of the side-to-side intermolecular packing caused by the two ortho-lateral fluoro substituents. For nB-Fx series, nB-FM, nB-FC and nB-FN exhibited a much wider mesophase range than the corresponding nB-FH series, which indicated that the substituent at benzoxazole moiety was helpful in increasing the mesophase stability. With the exception of nB-FN, the nB-Fx series displayed intense photoluminescence emission at 379–383 nm in methylene chloride solution, when it was excited at its absorption maxima.     

Synthesis and characterisation of benzoxazole-based liquid crystals possessing 3,5-difluorophenyl unit

Series of fluorinated compounds, 2-(3′,5′-difluoro-4′-alkoxybiphenyl-4-yl)-benzoxazole derivatives (nFBx), were prepared and characterised. Their phase transition behaviour was investigated by differential scanning calorimetry and polarising optical microscopy. In the case of carbon atoms in the alkoxy chain between 4 and 10, they exhibited enantiotropic mesophases with the mesophase ranges of 12–119°C and 23–152°C on heating and cooling for compounds bearing different substituents (H, CH₃, Cl, and NO₂). With the exception of nitro-substituted compounds, the nFBx series displayed intense photoluminescence emission at 380–385 nm in methylene chloride solution when they were excited at their absorption maxima. Compared to non-fluorinated analogues, fluorinated compounds nFBx (apart from nitro-substituted compounds) exhibited much lower melting points, but comparable or slightly narrower mesophase ranges during both heating and cooling, which were attributed to the disruption of the side-to-side intermolecular packing caused by the two lateral fluoro substituents.