Bifunctionalized allenes. Part XXII. Coinage metal-catalyzed cycloisomerization of phosphorylated 3-(α- or β-hydroxyalkyl)allenes to 2-phosphoryl-2,5-dihydrofurans or 2-phosphoryl-5,6-dihydro-2H-pyrans

Abstract

The present paper discusses the coinage metal-catalyzed cycloisomerization reaction of phosphorylated 3-(α- or β-hydroxyalkyl)allenes. 3-(α- or β-Hydroxyalkyl)-allenylphosphonates and -allenyl phosphine oxides were smoothly converted into the 2-phosphoryl-2,5-dihydrofurans or 2-phosphoryl-5,6-dihydro-2Н-pyrans by using 5?mol % of coinage metal salts as catalyst in 5-endo-trig or 6-endo-trig cycloisomerization, respectively. Experimental conditions such as the type of the solvent, the reaction temperature, the mol % and the type of the catalyst and its influence on the yields and the reaction time of the cycloisomerization reaction of the phosphorylated 3-(α- or β-hydroxyalkyl)allenes were optimized.     

Molybdic Acid-Catalysed Isomerization of D-Ribulose and D-Xylulose to the Corresponding 2-C-(Hydroxymethyl)-D-Tetroses

ABSTRACT

2-C-(Hydroxymethyl)-D-erythrose (2) and 2-C-(hydroxymethyl)-D-threose (4) have been stereospecifically synthesized in one-step by a molybdic acid-catalysed isomerization reaction from respective D-xylulose (1) and D-ribulose (3). In the case of interconversion of 1 to 2, the content of the 2-C-branched chain tetrose in the equilibrium mixture can be doubled if boric acid is present in the reaction mixture in addition to the catalyst.     

An Efficient Approach to the 2-Nonulosonic Acid Skeleton Through a Hetero-Diels-Alder Reaction

Abstract

The hetero-Diels-Alder reaction of 1,3-diene-polyols with glyoxylates is an expeditious way to build up the skeleton of ulosonic acids. This paper reports an efficient means to improve the yields and the stereoselectivity associated with the hetero-cycloaddition of the activated 1,3-diene, 2S,3S-4E-1-O-Benzyl-2,3-O-isopropylidene-6-ter-butyldimethylsilyloxyhepta-4,6-diene-1,2,3-triol (3) with the dienophile ethyl glyoxylate. The effects of temperature, catalyst, and solvent on the outcome of the Diels-Alder reaction were investigated. The cycloaddition can proceed smoothly even at ?78°C and the complex bis [3-(heptafluorobutyryl)camphorato]oxovanadium (8) was found to be a very efficient catalyst for the cycloaddition reaction. The satisfactory selectivity (endo/exo: 97:3 and re/si: 82:18) observed in this catalytic reaction shows that there is a match effect between the substrate and catalyst.     

Preparation of Calix[4]arene Alkylamine Derivatives by Mannich Reaction and use as Phase-Transfer Catalysts for Esterification Reaction

In this study, 5,11,17,23-tetrakis[(N-ethylpiperazine)methyl]-25,26,27,28-tetrahydroxycalix[4]arene (3) and 5,11,17,23-tetrakis[(4-carboethoxy-N-piperidino) methyl]-25,26,27,28-tetrahydroxycalix[4]arene (4) were synthesized in one step according to the Mannich reaction by the treatment of calix[4]arene with a secondary amine (N-ethylpiperazine, ethyl-4-piperidincarboxylate) and formaldehyde. The calix[4]arene derivatives (3, 4) were characterized by a combination of FTIR, ¹H NMR and elemental analyses. The synthesized compounds were used in an esterification reaction as the phase transfer catalyst. The catalytic efficiency of the calix[4]arenes 3 and 4 was evaluated by carrying out the ester-forming reaction of alkali metal carboxylates (sodium butyrate or sodium caprylate) with p-nitrobenzyl bromide. It was observed that the ester-forming reaction of alkali metal carboxylates with p-nitrobenzyl bromide, using calix[4]arene-based catalyst 3 as a phase-transfer catalyst in dichloromethan, provided the best yields.     

Synthesis of novel coumarinyl-pyrido[2,3-d]pyrimidine-2,4-diones using task-specific magnetic ionic liquid, [AcMIm]FeCl4 as catalyst

Abstract

An acid-functionalized magnetic ionic liquid, 1-acyl-3-methylimidazolium tetrachloroferrate, [AcMIm]-FeCl₄ has been utilized for the synthesis of a series of novel highly functionalized coumarinyl-pyrido[2,3-d]pyrimidine-2,4-dione derivatives (3a-3l) by the reactions of various 3-chloro-3-(2-oxo-2H-chromen-3-yl)acrylaldehydes (1) with functionalized aryl, 6-aminouracils. The major significant of the present procedure is the use of task-specific acidic ionic liquid which act as catalyst as well as reaction medium and thus avoiding use of organic solvent and/or protic acid catalyst. The other major advantages of the protocol are (i) shorter reaction time (1?h), (ii) easy work up procedure, (iii) excellent yields of products (91-94%), and (iv) recyclability of catalyst. The compounds (3a-3l) were identified using FT-IR, ¹H NMR, and ¹³C NMR and mass spectroscopic studies.     

Functionalized C-Glycosyl Compounds. III. Reaction of Tertiary Nucleophiles with Unsaturated Carbohydrates. Mechanism of the Anomerization

Abstract

Phenyl 2, 3-dideoxy-4, 6-di-O-benzyl-D-erythro-hex-2-enopyranoside 1α (or 1β) is alkylated regio- and stereospecifically at the anomeric center by stabilized tertiary nucleo-philes in the presence of Pd(0) as a catalyst, leading to the C-glycoside of α- (or β-) configuration. The observed loss of stereoselectivity using secondary stabilized nucleophiles is mainly due to a retro Michael reaction. The assignment of the α- (or β-) configuration at the anomeric center was accomplished using ¹³C NMR and NOE experiments.     

Water-mediated,green, and efficient synthesis of bisquinolones under catalyst-free conditions

Water-mediated, green, and efficient synthesis involving condensation of 4-hydroxy-1-methylquinoline-2(1H)-one (3) with different aromatic and heterocyclic aldehydes (4a–n) leading to 3,3′-(arylmethylene)-bis-(4-hydroxy-1-methylquinolin-2(1H)-one) 5(a–n) under catalyst-free conditions is described. This reaction has an easy workup without using column chromatography and provides excellent yields of the products in shorter reaction times. It does not require any catalyst and uses water as the medium which is the greenest solvent. 3 required in this work was itself obtained by condensation of N-methylaniline (1) with malonic acid (2) in the presence of POCl₃ using a previously reported procedure.     

Isospecific Polymerization of Propylene By ansa-Zirconocene Diamide Compound Cocatalyzed by Mao

Abstract

The kinetics of propylene polymerization initiated by racemic ethylene-1,2-bis(1-indenyl) zirconium bis(dimethylamide) [rac-(EBI) Zr(NMe₂)₂(rac-1)] cocatalyzed by methylaluminoxane (MAO) were studied. The polymerization behaviors of rac-1/MAO catalyst investigated by changing various experimental parameters are quite different from those of rac-(EBI) ZrCl₂ (rac-2)/MAO catalyst, due to the differences in the generation procedure of cationic actives species of each metallocene by the reaction with MAO. The activity of rac-1/MAO catalyst showed maximum when [Al]/[Zr] is around 2000, when [Zr] is 137.1 μM, and when polymerization temperature is 30°C. The negligible activity of rac-1/MAO catalyst at a very low MAO concentration seems to be caused by the instability of the cationic active species. The meso pentad values of polymers produced by rac-1/MAO catalyst at 30°C are in the range of 82.8% to 89.7%. The rac-1/MAO catalyst lost stereorigid character at the polymerization temperature above 60°C. The molecular weight of polymer decreased as [Al]/[Zr] ratio, polymerization temperature, and [Zr] increased. The molecular weight distributions of all polymers are in the range of 1.8–2.3, demonstrating uniform active species present in the polymerization system.     

Asymmetric Direct Aldol Reactions Catalyzed by a Simple Chiral Primary Diamine–Br⊘nsted Acid Catalyst in/on Water

Abstract

The direct asymmetric aldol reaction catalyzed by the simple and commercially available chiral primary diamines, (1S,2S)-1,2-diphenylethane-1,2-diamine and (1R,2R)-1,2-diphenylethane-1,2-diamine, is presented. The catalyst system is a primary amine with Br?nsted acid–catalyzed direct aldol reaction of p-nitrobenzaldehyde and cyclohexanone with high chemo- and stereoselectivity on water, which furnishes the corresponding β-hydroxyketone with up to 94% ee.     

Multicomponent one pot synthesis of C-glucosides of 1-azaindolizines

Abstract

A protocol based on Groebke-Blackburn-Bienayame (GBB) multicomponent reaction has been developed for efficient and atom economical synthesis of C-glucosides of 1-azaindolizine, i.e. 2-(β-D-glucopyranosyl)-3-N-alkylamino-1-azaindolizine. Thus, a series of fourteen novel 2-(β-D-glucopyranosyl)-3-N-alkylamino-1-azaindolizines have been synthesized in moderate to good yields by reaction of a perbenzylated β-C-glucopyranosyl aldehyde with differently substituted 2-aminopyridines and alkyl isocyanides using InCl₃ as acid catalyst. All synthesized β-C-glucosides were unambiguously characterized with the help of spectroscopic (IR, ¹H-NMR, ¹³C-NMR and mass spectra) data analysis.     

Synthesis and calming activity of 6<Emphasis Type="Italic">H</Emphasis>-2-Amino-4-Aryl-6-(4-<Emphasis Type="Italic">β</Emphasis>-D-Allopyranosyloxyphenyl)-1,3-Thiazine

E-(4-β-D-Allopyranosyloxyphenyl)-1-(4-substituted phenyl)propenone derivatives (1a–g) have been synthesized by the Claisen-Schmidt condensation of helicid with 4-substituted acetophenone using 10% NaOH aqueous solution as a catalyst. 6H-2-Amino-4-aryl-6-(4-β-D-allopyranosyloxyphenyl)-1,3-thiazine (2a–g) were synthesized by the 1,4-Michael reaction of 1a–g with thiourea. The structures of all the new products were established by ¹H NMR, IR, and MS spectroscopy. Compound 2b (200 mg·kg^–1) showed better sedative-hypnotic activity, so further modification of helicid should be worthwhile.     

Green synthesis of diethyl((2-iodo-4-(trifluoromethyl)phenyl)amino)(aryl)methyl)phosphonates as potent α-glucosidase inhibitors

Abstract

Novel diethyl((2-iodo-4-(trifluoromethyl)phenyl)amino)(aryl)methyl)phosphonates (4a-j) were synthesized via a simple and efficient one pot by three-component condensation reaction (Kabachnik-Fields reaction) of 2-iodo-4-trifluoromethyl aniline, aromatic aldehydes and diethyl phosphite in presence of anatase TiO₂ nanoparticles as catalyst under solvent free conditions. The molecular docking studies of synthesized compounds with α-glucosidase enzyme revealed that these compounds have strong α-glucosidase inhibitory activity. The synthesized compounds (4a-j) are also screened for in vitro α-glucosidase inhibitory activity and the results showed compound 4i as the strongest inhibitor and compounds 4a, 4b, 4f and 4g as stronger inhibitors even better than the reference standard acarbose.     

Catalytic Activity of Polymer Anchored Cu-tren Complex in the Oxidation of 2,6-Di-t-butyl Phenol

Poly(styrene-co-dimethylaminoethyl methacrylate) and poly(methyl methacrylate-co- dimethylaminoethyl methacrylate) were prepared by solution polymerization. These polymers were quaternized by methyl iodide and n-hexyl bromide. The produced polymers were used as support in the aqueous oxidation of 2,6-di-tert-butylphenol (DBP) using hydrogen peroxide catalyzed by tris(2-aminoethyl)amine copper(II) complex “Cu(II)-tren complex” anchored on the prepared polymers. The products obtained from the reactions were 3,3′-5,5′-tetra-tert-butyldiphenoquinine (DPQ) and 2,6-di-tert-butyl-p-benzoquinone (BQ). No reaction products were obtained when the reaction was carried out in the absence of polymeric catalyst. The polymer composition and reaction medium greatly affect product distribution of the reaction. Polar organic solvent like DMF and methanol favor the formation of DPQ, while nonploar organic solvent like benzene and methylene chloride favor the formation of BQ. Hydrophobic branches of polymers 6 (PS-HexBr-Cu-TREN) and 8 (PMMA-HexBr-Cu-TREN) favor BQ formation as the weight of support increased. On the other hand, DPQ is favored in the presence of hydrophilic branches as observed for both polymeric catalysts 5 (PS-MeI-Cu-TREN) and 7 (PMMA-MeI-Cu-TREN).     

Microwave Assisted Synthesis of Biologically Active α-Aminophosphonates Catalyzed by Nano-BF3·SiO2 under Solvent-Free Conditions

Abstract

An efficient and high-yield synthesis of a class of new α-aminophosphonate derivatives as diethyl α-aryl/2-thienyl-α-[2-(phenylthio)phenylamino]methylphosphonates 6a–j in short reaction times from three component coupling reactions (Kabachnik-Fields reaction) of 2-aminodiphenylsulfide 3, substituted phenyl/heterocyclic aldehydes 4a–j, and diethyl phosphite 5 is reported. The reaction proceeds smoothly in the presence of the catalyst, nano-silica-supported boron trifluoride (BF₃·SiO₂) without using solvent under microwave irradiation. The title compounds were tested for in vitro antibacterial and antifungal activities at concentrations of 100 and 200 μg/disc. Minimum inhibitory concentrations (MICs) were also examined.

Supplementary materials are available for this article. Go to the publisher's online edition of Phosphorus, Sulfer, and Silicon and the Related Elements for the following free supplemental files: Additional text, figures and tables.     

Acetylenchemie, 33. Mitt.: Synthese von 2-substituierten Dihydrofuro[2,3-b]chinolinen

Summary The reaction of 3-iodo-4-methoxy-2(1H)-quinolinone (1) and 3-iodo-4,6,8-trimethoxy-2(1H)-quinolinone (2) with 2-methyl-3-butyn-2-ol under modified Heck-conditions gave the 2-substituted derivatives 2-(1-hydroxy-1-methylethyl)-4-methoxyfuro[2,3-b]-quinoline (3) and 2-(1-hydroxy-1-methylethyl-4,6,8-trimethoxyfuro[2,3-b]-quinoline (4). By a subsequent hydrogenation-reaction with a homogeneous catalyst (PtO₂/Rh₂O₃), the furoquinoline-derivatives yielded the dihydrofuro-[2,3-b]quinolines, identified as 2-(1-hydroxy-1-methylethyl-4-methoxy-2,3-dihydrofuro[2,3-b]quinoline (5) (racemic platydesmine) and 2-(1-hydroxy-1-methylethyl)-4,6,8-trimethoxy-2,3-dihydrofuro-[2,3-b]quinoline (6) (racemic precursor of O⁴-methylptelefolonium salt).

     

Thiazolium Salt Immobilized on Ionic Liquid: An Efficient Catalyst and Solvent for Preparation of α-Hydroxyketones

Aldehydes were efficiently converted to acyloins and benzoins using a new ionic liquid, 3-[2-(1-butyl-1H-imidazol-1,3-ium-3-yl)ethyl]-4,5-dimethyl-1,3-thiazol-3-ium dibromide 1 . This ionic liquid is introduced as a catalyst and a solvent. Acyloins and benzoins were easily isolated from the reaction mixture via simple extraction, and the ionic liquid could be recycled for further use. Also, α-hydroxy ketones with an aromatic and aliphatic substituent were prepared starting from aromatic and aliphatic aldehydes in the presence of ionic liquid 1 .     

NaF-catalyzed efficient one-pot synthesis of dihydropyrano[2,3-c]pyrazoles under ultrasonic irradiation via MCR approach

Sodium fluoride was identified as an efficient catalyst for the preparation of series of dihydropyrano [2,3-c]pyrazoles (4a–l) by the three-component condensation of 3-Methyl-1-phenyl-2-pyrazoline-5-one (1), aromatic aldehydes (2) and malononitrile (3) in aqueous methanol at ambient temperature under ultrasonication. The cost and efficacy of the catalyst, mild reaction conditions, simple workup procedure, less reaction time and higher yields of the product with analytical purity keeping this protocol superior to the previously reported ones. Structures of all the compounds were in agreement with their spectroscopic data (¹H NMR, ¹³C NMR) and elemental (CHN) analyses.     

Synthesis,structural characterization and catalytic potential of oxidovanadium(IV) and dioxidovanadium(V) complexes with thiazole-derived NNN-donor ligand

Reaction between the tridentate NNN donor ligand, (E)-2-(2-(1-(pyridin-2-yl)ethylidene)hydrazinyl)benzo[d]thiazole (HL), and V₂O₅ in ethanol gave a new vanadium(V) complex, [VO₂L] (1), while the similar reaction by using [V^IVO(acac)₂] as the metal source gave two different types of crystals related to compounds [VO₂L] (1) and [V^IVO(acac)L] (2). The molecular structures of the complexes were determined by single-crystal X-ray diffraction and spectroscopic characterization was carried out by means of FT-IR, UV–vis and NMR experiments as well as elemental analysis. The oxidovanadium(IV) and dioxidovanadium(V) species were used as catalyst precursors for olefin oxidation in the presence of hydrogen peroxide (H₂O₂) as an oxidant. Under similar experimental conditions, the presence of 1 resulted in higher oxidation conversion than 2.     

手性二胺修饰的负载型钌催化剂催化芳香酮不对称加氢

研究了用手性修饰剂(1S,2S)-(－)-1,2-二苯基乙二胺修饰的负载型钌催化剂(Ru/γ-Al₂O₃)催化芳香酮的不对称加氢反应, 在KOH的异丙醇溶液中, 10～20 ℃, p_H2＝5 MPa条件下, 芳香酮及其衍生物加氢产物的ee值达79.5%～85.0%, 2-乙酰基噻吩加氢产物的ee值可达86.2%. 此催化剂制备简单, 容易与产物分离, 重复使用4次, 对映选择性基本保持不变.     

Reaction of Dimethyl Acetylenedicarboxylate With 2-Mercaptoperimidine and 2-Mercaptobenzimidazole

A mixture of equimolar quantities of dimethyl acetylenedicarboxylate ( 2 ) with either 2-mercaptoperimidine ( 1 ) or 2-mercaptobenzimidazole ( 5 ) was heated in absolute benzene in the presence of triphenylphosphine as a catalyst under reflux conditions for 1 h (the reaction was monitored by TLC until the consumption of the starting materials). The solvent was concentrated under vacuum and the residue was subjected to chromatographic plates using toluene-ethylacetate (2:1) as an eluent. The products in each reaction were separated as two migrating zones. Each zone was removed from the plate and recrystallized from the appropriate solvent. The products of the first reaction are 10-methoxy-11-oxo-11H-8-thia-7,11a-diaza-benzo[de]anthracene-9-carboxylic acid methyl ester ( 3 ) and 8-thia-7,10a-diaza-cyclopenta[a]phenalene-9,10-dicarboxylic acid dimethyl ester ( 4 ), while the products of the second reaction are 3-methoxy-4-oxo-4H-1-thia-4a,9-diaza-fluorene-2-carboxylic acid methyl ester ( 10 ) and benzo[4, 5]imidazo[2,1-b]thiazole-2,3-dicarboxylic acid dimethyl ester ( 11 ). The mechanisms of the observed reactions are suggested.