Reduction of silver cation in the cavity of diaza-18-crown-6: A theoretical study

The structure and stability of diaza-18-crown-6 (1) complex with silver cation was studied by the density functional method with the PBE functional. The reduction of the cation in the macrocycle cavity was simulated and possible stability of the resulting van der Waals complex of the crown ether 1 with silver atom was analyzed. It is shown that, after electron capture, two equilibrium conformers of Ag⁺·1 give two structures locally stable with respect to the dissociation into the silver atom and the crown ether in its nearest equilibrium conformation. One of the neutral structures, that of the C _s symmetry, corresponds to a global minimum on the potential energy surface of the Ag⁰—1 system. It ensures the thermodynamic stability of the reduced complex with respect to dissociation. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 3, pp. 395–399, March, 2007.     

Double-armed and tetra-armed cyclen-based cryptands

Double-armed and tetra-armed cyclen-based cryptands (1a–1d and 2) that bridge two aromatic rings by diethyleneoxy and triethyleneoxy units were prepared. The CSI-MS of 1:1 mixtures ([Ag⁺]/[ligand]) indicated that these new cryptands form 1:1 complexes with Ag⁺. The log K values for the interaction between Ag⁺ and 2 was greater than those of 1a–1d, double-armed cyclens (3a–3c and 4), and tetra-armed cyclen (5). The Ag⁺-ion-induced ¹H NMR spectral changes suggest that the Ag⁺–π interactions of the Ag⁺ complexes with the cryptands (1a–1d and 2) are stronger than those in Ag⁺/double-armed and tetra-armed cyclens. To visualise the Ag⁺?π interactions, the isosurfaces of the LUMO and HOMOs of the Ag⁺ complexes were calculated at the B3LYP/3–21G(*) theoretical level. The LUMO of the Ag⁺ ion is distorted by interaction with the HOMOs of the aromatic side arms. The calculations reveal Ag⁺?π interactions between the Ag⁺ ion and the aromatic side arms, and these are shown graphically.     

New Copper(II) Ion-Selective Membrane Electrode Based on Erythromycin Ethyl Succinate as a Neutral Ionophore

Abstract

The potentiometric response characteristics of a new copper(II) ion-selective PVC membrane electrode based on erythromycin ethyl succinate (EES) as ionophore were investigated. The electrode exhibited a Nernstian response to Cu²⁺ ions over the activity range of 1.5 × 10^?2 to 2.0 × 10^?6 mol L^?1 with a limit of detection of 6.3 × 10^?7 mol L^?1. Stable potentials were obtained in the pH range of 5.5–6.5. The potentiometric selectivity coefficients were calculated by using fixed interference method and revealed no important interferences except for Ag⁺. This electrode was successfully applied as an indicator electrode in determination of copper ions in real water samples.     

Excellent Ag+ selective receptors: Syntheses and complexation properties of novel biscalix[4]arene with benzalazine groups

By reacting mono-substituted or 1,3-bi-substituted [2-(p-formylphenyloxy)ethyloxy]-p-tert-butylcalix[4]arene (3 or 4) with hydrazine hydrate in ‘1+2’ or ‘2+2’ condensation mode, novel benzalazine-bridging biscalix[4]arenes 5 and 7 were conveniently obtained in the yields of 76 and 81%, respectively. Condensation of compound 4 and salicylide hydrazone gave a novel calix[4]arene benzalazine derivative 6 in the yield of 85%. The structures and conformations of all new compounds were characterised by elemental analyses, ESI-MS, ¹H NMR and ¹H–¹H COSY techniques. Biscalix[4]arene 7 adopts a symmetrical cone conformation with tube cavity. The liquid–liquid extraction experiment showed that all new hosts possessed excellent complexation abilities towards soft metal cations. Compound 7 exhibited high complexation selectivity towards Ag⁺. The Ag⁺/Na⁺ and Ag⁺/Hg²⁺ extraction percentages of host 7 were as high as 73.1 and 54.9, respectively. The UV–vis spectra complexation experiments revealed that the complexation constant of receptor 7 with Ag⁺ was 1.9 × 10⁵ M^? 1 and the 1:1 stoichiometry of receptor 7–Ag⁺ complex was formed. The ¹H NMR spectra complexation experiments suggested that Ag⁺ was bound in a cavity composed of two benzalazine groups on bridging chains.     

Autooxidation and stabilization of undoped and doped polyacetylenes

Autooxidations of polyacetylene have been measured by volumetric, infrared, and isothermal TGA weight uptake techniques. The rate of oxygen uptake is 9 × 10^?7 mol (g s)^?1 at 70°C and the overall activation energy is about 10 kcal mol^?1. The maximum oxygen uptake corresponds to [CHO_0.25]_x. Above 100°C there is oxidative degradation of the polymer completely to volatile products. The rate constant for the oxidative degradations at 160°C is ca. 1.5 × 10^?5s. Autooxidation does not result in formation of significant amounts of crosslinking because there are not carbonaceous residues. TGA under a stream of oxygen showed the degradation to be complete at ca. 420°C leaving no residues. Autooxidation is much slower if the polymer is compressed to higher bulk density. Radical scavengers such as BHT and 4010 are effective stabilizers. Hydroperoxide decomposers, such as DSTDP, does not help in the stabilization; spin trap BPN accelerates the oxidation of polyacetylene. Iodine and AsF₅ doped polyacetylenes are oxidatively much more stable than undoped polymers. Perchlorate doped polyacetylenes begin to lose weight as soon as heated above room temperature. Even in an inert atmosphere the polymers often undergo explosive decomposition.     

Solubility studies in formamide: II. Solubility product of silver iodate and standard electrode potential of silver—silver iodate electrode in formamide

The solubility and solubility product of silver iodate in formamide in sodium perchlorate solutions have been determined at 25, 30 and 35°C. The solubilities in pure formamide are found to be 2.169 × 10^?4, 2.488 × 10^?4, and 2.943 × 10^?4 mole I^?1, respectively, at these temperatures, and the corresponding solubility products are 4.609 × 10^?8, 6.053 × 10^?8, and 8.448 × 10^?8 mole² 1^?2. The standard potential of the Ag_(s)/AgIO_3(s)/IO₃^? electrode has been calculated and found to be 0.2562 V at 25°C. The mean activity coefficients of silver iodate at various rounded molarities of sodium perchlorate solutions, and the standard thermodynamic quantities for the process AgIO_3(s)åAg⁺ (solvated) + IO₃^? (solvated) have been calculated at these three temperatures.     

Synthesis,spectroscopic properties,and antimicrobial activity of some new 5-phenylazo-6-aminouracil-vanadyl complexes

Six complexes, [VO(L¹-H)₂]?·?5H₂O (1), [VO(OH)(L^2,3?H)(H₂O)]?·?H₂O (2,3), [VO(OH)(L^4,5?H)(H₂O)]?·?H₂O (4,5), [VO(OH)(L⁶?H)(H₂O)]?·?H₂O (6), were prepared by reacting different derivatives of 5-phenylazo-6-aminouracil ligands with VOSO₄?·?5H₂O. The infrared and ¹H NMR spectra of the complexes have been assigned. Thermogravimetric analyses (TG, DTG) were also carried out. The data agree quite well with the proposed structures and show that the complexes were finally decomposed to the corresponding divanadium pentoxide. The ligands and their vanadyl complexes were screened for antimicrobial activities by the agar-well diffusion technique using DMSO as solvent. The minimum inhibitory concentration (MIC) values for 1–4 and 6 were calculated at 30°C for 24–48?h. The activity data show that the complexes are more potent antimicrobials than the parent ligands.     

The Use of the CS2N− 3/HSO− 3/O2 Reaction for the Analytical Determination of Dissolved Oxygen

Abstract

A new analytical Spectrophotometric method has been developed for the determination of dissolved O₂ in the range 4.6 × 10^?6?4.1 × 10^?5M, based on the CS₂N^? ₃/HSO^? ₃/O₂ reaction. In one single experiment 2.3 × 10^?5 M of oxygen can be determined with an uncertainty of ± 7 × 10^?7M for a confidence level of 95%.     

Indole-based distinctive chemosensors for ‘naked-eye’ detection of CN and HSO4−, associated with hydrogen-bonded complex and their DFT study

Colorimetric detection of anions (HSO₄^? and CN^?) was achieved via analyte triggered colour changing of the dipodal and tripodal sensors in CH₃CN–H₂O (1:1). The sensors exhibited very sharp visual colour changes and fluorescence quenching–enhancing effect upon addition of the HSO₄^? and CN^?. The large downfield shift of the NH proton signals in ¹H-NMR complexation studies and quantum chemical DFT calculations proved the formation of hydrogen-bonded complexes where no proton transfer mechanism was found.     

Silver(I)-selective electrode based on [Bz2Oxo4(18)dieneS4] tetrathia macrocyclic carrier

A polystyrene-based membrane of 7,8:16,17-dibenzo-6,9,15,18-tetraoxo-1,5,10,14-tetrathiacyclooctadeca-7,16-diene [Bz₂Oxo₄(18)dieneS₄] was fabricated using sodium tetraphenylborate (NaTPB) and dioctyl phthalate (DOP) as anion excluder and plasticizing agent. The best performance was obtained from the membrane with the composition ionophore [Bz₂Oxo₄(18)dieneS₄]:polystyrene:DOP:NaTPB, 5:100:150:10 (w/w). The response of the electrode was linear over a wide range of concentration, 1.26×10^–6–1.00×10^–1 mol L⁻¹ for silver ion with a Nernstian slope of 58.4±0.1 mV per decade and a detection limit of 1.0×10⁻⁶ mol L⁻¹. The electrode was found to be chemically inert and of adequate stability with a response time of 10 s and could be used for a period of 3 months without change of potential. It worked satisfactorily in mixtures containing up to 35% (v/v) non-aqueous content. The proposed membrane sensor had good selectivity for Ag⁺ over a wide variety of metal ions in the pH range 2.2–8.5. It was successfully used as an indicator electrode in potentiometric titration of silver ion. The electrode was also useful for determination of Ag⁺ in waste from photographic films.     

Synthesis and characterization of ambient temperature superionic solids in the composite system CuI–Ag<Subscript>2</Subscript>O–TeO<Subscript>2</Subscript>

The present work deals with the composite system (CuI) _x –(Ag₂O–TeO₂)_{100– x} , where x=30, 35, 40, 45, 50, 55, 60, 65, 70 and 75 mol%, respectively, synthesized by a solid-state reaction route. Powder specimens were analysed using differential scanning calorimetry, X-ray diffraction and Fourier transform infrared techniques. These studies have revealed the formation of Cu₃TeO₆, AgI and/or other phases. The ambient temperature electrical conductivities obtained for the samples using a complex impedance method were found to lie in the range 10^–6–10^–4 Scm^–1, with low activation energies, thus indicating their superionic nature. The typical composition 35CuI–32.5Ag₂O–32.5TeO₂ was identified as the best conducting one, having an electrical conductivity of 6×10^–4 Scm^–1 at 296 K and an activation energy of 0.23 eV. Ion transport number measurements carried out using Wagner's polarization technique as well as by an electromotive force method suggested that silver ions were responsible for the observed transport features of the composite system. Electronic Publication     

Ionic conductivity of superionic conducting glasses in the pseudobinary system AgIAg2MoO4

The ionic conductivity was measured in the temperature range 250–300 K as a function of composition of superionic conducting glasses in the pseudobinary system AgIAg₂MoO₄. The conductivity, ranging from 10^?2 to 10^?4 Ω^?1 cm^?1 at room temperature, increases linearly in logarithmic scale with increasing AgI content, while the total silver ion concentration remains nearly constant in the whole glass-forming region of the present system. Such a composition dependence of conductivity is considered to be evidence that only a fraction of the silver ions in glass contributes to the ionic conduction. The conductivity and the activation energy for conduction differ slightly between bulk glasses and pressed pellets of pulverized glasses. The close agreement in bulk glasses and pellets suggests that bulk rather than grain boundary or surface diffusion dominates the conduction process in the present glasses.     

Preparation and characterization of conductive chitosan–ionic liquid composite membranes

Anhydrous conductive membranes composing of a composite of chitosan (CS) and ionic liquids with symmetrical carboxyl groups were explored. Scanning electron microscope images revealed that porous composite membranes could be obtained by combining CS with different amounts of 1,4‐bis(3‐carboxymethyl‐imidazolium)‐1‐yl butane chloride ([CBIm]Cl). Fourier transform infrared and proton nuclear magnetic resonance confirmed that the formation of ammonium salts after CS was combined with [CBIm]Cl. The thermal property of CS–ionic liquid composite membranes was studied through thermogravimetric analysis. The anhydrous ionic conductivities of CS–[CBIm]X (X = Cl, Ac, BF₄, and I) composite membranes were measured using ac impedance spectroscopy at room temperature in N₂ atmosphere. The conductivities (0.4–0.7 × 10^?4 Scm^?1), found to be in the same range as semiconductors, were significantly higher than those of pure CS membrane (<10^?8 Scm^?1). In addition, the anhydrous conductivity of composite membrane based on CS–[CBIm]I at room temperature reached a level as high as 0.91 × 10^?2 Scm^?1 when iodine was doped. Copyright © 2011 John Wiley & Sons, Ltd.     

Solubility studies in formamide: III. Solubility product of silver bromate and standard electrode potential of silver—silver bromate electrode in formamide

The solubility and solubility product of silver bromate in formamide in sodium perchlorate solutions have been determined at 25, 30 and 35°C. At these temperatures, the solubilities in pure formamide are found to be 1.837 × 10^?2, 1.967 × 10^?2, and 2.092 × 10^?2 moll^?1, respectively, and the corresponding solubility products are 3.375 × 10^?4, 3.869 × 10^?4, and 4.377 × 10^?4 mol² l^?2. The standard potentials of the Ag(s)/AgBrO₃(s)/BrO^?₃ electrode have been calculated and found to be 0.4997, 0.4948, and 0.4892 V, at 25, 30, and 35°C, respectively. The mean activity coefficients of silver bromate at various rounded molarities of sodium perchlorate solutions, and the standard thermodynamic quantities for the process AgBrO₃(s) → Ag⁺(solvated) + BrO^?₃(solvated) have been calculated at these three temperatures and compared with those for the process AgIO₃(s) → Ag⁺(solvated) + IO^?₃(solvated) in formamide.     

Effects of partial anion substitution on the thermoelectric properties of silver(I) chalcogenide halides in the system Ag5Q2X with Q=Te, Se and S and X=Br and Cl

A selection of mixed conducting silver chalcogenide halides of the general formula Ag₅Q₂X with Q=sulfur, selenium and tellurium and X=chlorine and bromine has been investigated due to their thermoelectric properties. Recently, the ternary counterpart Ag₅Te₂Cl showed a defined d¹⁰-d¹⁰ interaction in the disordered cation substructure at elevated temperatures where Ag₅Te₂Cl is present in its high temperature α-phase. A significant drop of the thermal diffusivity has been observed during the β−α phase transition reducing the values from 0.12 close to 0.08 mm² s⁻¹. At the same transition the thermopower reacts on the increasing silver mobility and jumps towards less negative values.Thermal conductivities, thermopower and thermal diffusivity of selected compounds with various grades of anion substitution in Ag₅Q₂X were determined around the silver-order/disorder β−α phase transition. A formation of attractive interactions could be observed for selenium substituted phases while no effect was detected for bromide and sulfide samples. Depending on the grade and type of substitution the thermopower changes significantly at and after the β−α phase transition. Thermal conductivities are low reaching values around 0.2-0.3 W m⁻¹ K⁻¹ at 299 K. Partial anion exchange can substantially tune the thermoelectric properties in Ag₅Q₂X phases.     

卤化银添加剂对125I在北山花岗岩岩粉中的吸附作用研究

利用柱法实验和批次实验研究了卤化银(AgCl、AgBr、AgI)对¹²⁵I在甘肃北山花岗岩中的吸附现象。结果表明在无载体的情况下,卤化银添加剂有利于¹²⁵I在北山花岗岩岩粉中的吸附,有效分配系数(K_d,e)均大于1.0×10³ mL·g^-1。在有载体的情况下,氯化银和溴化银仍然对¹²⁵I在北山花岗岩岩粉中有良好的吸附作用,K_d,e大于1.0×10³ mL·g^-1。其中,溴化银的吸附效果最好,这可能与其晶体结构和光解性质有关。     

SN-conducting polymers with heterocyclic spacer groups

Polymer-containing alternating sulfur nitrogen moieties separated by heterocyclic groups have been synthesized and characterized. The polymers have undoped conductivities of 10^?6 to 10^?9 (Ω cm)^?1; the intrinsic carriers are negatively charged as shown by thermopower coefficient of ?1.4 × 10³ to ?1.9 × 10³ μV K^?1. The polymers are degraded by AsF₅ and cannot be doped by iodine. Exposure to bromine resulted in reversible p-doping of the SN polymers to the thermopower values of +400 to +820 μV K^?1 and conductivities of 0.01 to 0.002 (Ω cm)^?1. Removal of dopant by evacuation returns most of the properties of the polymers to the undoped states. Magnetic properties of the materials have been studied.     

Synthesis and evaluation of multitopic bisbenzothiazolyl calix[4]arenes for ionic toxicants

Abstract

Two new benzothiazolyl calix[4]arene-based multitopic molecular receptors L-1 and L-2 have been synthesised and evaluated for recognition of ionic toxicants. The receptors selectively interact with copper, silver and fluoride ion toxicants as assessed through UV-visible, NMR and colorimetric techniques. The stability of L-1:Cu⁺² and L-2:Cu⁺² complexes was found to be higher than that of complexes formed with Ag⁺ and F^– complexes in the presence of trifluoroacetic acid. Superiority of L-1 over L-2 for analysis of identified toxicants has been determined by measurement of binding constants.     

Synthesis,characterization, and biological evaluation of silver(I) complexes of N′-(1-(pyrazin-2-yl)ethylidene)picolinohydrazide

Three Ag⁺ complexes, [Ag(L)(NO₃)]_n (1), {[Ag(L)]·SbF₆·CH₂Cl₂}_n (2), and {[Ag(L)]·SO₃CF₃·CHCl₃}_n (3), based on a hydrazone ligand L have been obtained (L = N′-(1-(pyrazin-2-yl)ethylidene)picolinohydrazide) and characterized. Complexes 1–3 all show 1-D chain-like structures. Their antibacterial activity and interaction with serum albumin were investigated. These results indicate that these complexes show good antibacterial activities and binding affinity to serum albumin.     

Synthesis and characterization of an anion triazole framework containing μ 3-Cl and μ 2-Cl bridges

Using 3,5-dimethyl-4-amino-1,2,4-triazole (L) and corresponding Ag(I), K(I) salts under ammonia solution and hydrothermal conditions, a triazole–silver(I)–potassium(I) complex {K[Ag₂L₂(μ ₃-Cl)(μ ₂-Cl)₂]} _n (1) has been isolated. In 1, μ ₃-Cl, μ ₂-Cl and L bridge Ag^I ions forming a rare 1-D [Ag₂L₂(μ ₃-Cl)(μ ₂-Cl)₂]^? anion while K⁺ cations are located between neighboring anion chains. Strong solid-state fluorescence spectrum of 1 was also investigated showing that the excited peak is located at 320 nm while the maximum emission peak is located at 440 nm.