1H-, 13C-UND 31P-NMR-SPEKTROSKOPISCHE UNTERSUCHUNGEN AN BIS-(DIALKOXYTHIOPHOSPHORYL)-UND-(DIALKOXYPHOSPHORYL)-SULFANEN UND-POLYSULFANEN

Abstract

Compounds of the following structure

(R¹O)₂(X)P[sbnd]Y–P(X)(OR²)₂

(X = O, Y = S_n (n = 1–4), R¹ = R² = Me, iPr;

X = S, Y = S_n (n = 1–4), R¹, R² = Me, Et, iPr, iBu;

X = S, Y = S-Se-S, S-Te-S, R¹ = R² = Me

were prepared and their NMR spectra were analysed. Depending on the number of sulfur atoms, bonded between the phosphorus atoms, typical ranges of the P-P coupling constants were found for the different sulfanes investigated: ²J_PP from-10 to-20 Hz, ³J_PP less than 3 Hz, ⁴J_PP from +10 to +13 Hz and ⁵J_PP less than 1 Hz. For the small vicinal coupling constants and the relatively large values of ⁴J_PP different possibilities of their interpretation are given.     

Coordination properties of N-(Thio)phosphorylated thioureas and thioamides with respect to Co(II), Ni(II), Zn(II), and Cd(II) ions in solution

The acid-base and coordination properties of N-(thio)phosphorylated thioureas and thioamides R¹C(X)NHP(Y)R ₂ ² , where X, Y = S, O (in various combinations); R¹ = t?Bu, i-Pr, PhNH, Ph; R² = (OPr?i), with respect to Co(II), Ni(II), Zn(II), and Cd(II) ions have been studied by pH-metry and UV spectrometry in an organic solvent. The pK values, the stability constants logβ and the maximum accumulated fractions of complex species in the solution have been calculated.     

Synthesis,Structure and Properties of C(X)NHP(Y) Fragment Containing Compounds

Abstract

N-(thio)carbonyl(thio)amidophosphate, their open-chain and crown-containing analogues with a C (X) NHP (Y) fragments are associated with intermolecular hydrogen bonds as C=X…H-N and P=Y…H-N or intramolecular hydrogen bonds of N-H…O(macrocycle). These compounds easily enter into alkylation reaction, are added according to C=N bonds of activated imines, take part in O → S and S → O exchanging reactions.     

Complexes of Co(II) and Zn(II) with N-(Thio)phosphorylthioureas AdNHC(S)NHP(O)(OiPr)2 and MeNHC(S)NHP(S)(OiPr)2

The reaction of the potassium salt of the N-(thio)phosphorylated thioureas AdNHC(S)NHP(O)(OiPr)₂ (HL^I , Ad = Adamantyl) and MeNHC(S)NHP(S)(OiPr)₂ (HL^II ) with Co(II) and Zn(II) in aqueous EtOH leads to [ML^I,II ₂] chelate complexes. They were investigated by UV-vis, ¹H and ³¹P NMR spectroscopy, and microanalysis. The molecular structures of [ML^I ₂] were elucidated by single crystal X-ray diffraction analysis. The metal centers in both complexes are found to be in a distorted-tetrahedral O₂S₂ environment formed by the C=S sulfur atoms and the P=O oxygen atoms of two deprotonated L^I ligands. The photoluminescence properties of [ZnL^II ₂] are also reported.     

New Organophosphorus Proligands and Amide Precursors: Crystal and Molecular Structures of Ph2P(X)NH(C6H3Pri 2-2,6) (X = O,S) and (OPPh2)(O2SMe)N(C6H3Pri 2-2,6)

The new organophosphorus proligand (OPPh₂)(O₂SMe)NR (R = C₆H₃Prⁱ ₂–2,6) (3) was prepared as a white crystalline solid by reacting the lithiated compound Li[Ph₂P(O)NR] with MeSO₂Cl in a 1:1 molar ratio. The precursor Ph₂P(O)NHR (1), as well as its thio analogue Ph₂P(S)NHR (2), were obtained in the reaction between the lithiated amine RNHLi and the corresponding organophosphorus chloride. All compounds were characterized by multinuclear (¹H, ¹³C, and ³¹P) NMR spectroscopy. The molecular structures of 1–3 were established by single-crystal X-ray diffraction. A zigzag polymeric chain is formed in the crystals of 1 and 2 by hydrogen N–H···X (X = O, S) bonding, while the crystal of 3 contains discrete monomeric units with a syn–syn conformation of the O?P(C)₂–N–S(C)(?O)₂ skeleton.

Supplemental materials are available for this article. Go to the publisher's online edition of Phosphorus, Sulfur, and Silicon and the Related Elements to view the free supplemental file.     

Alkyl and cyclic substituted thiuram disulphides as ligands. titanium(iv), vanadium(iv), and oxovanadium(iv) complexes

Summary Titanium(IV) hexacoordinate thiuram disulphide complexes of the type [TiX₄R₂NC(S)SSC(S)NR₂}] (X=Cl or Br; R=Me, Et, piperidinyl or morpholinyl) have been prepared by reaction between TiX₄ (X=Cl or Br) and the thiuram disulphide. Similar reactions with VOCl₃ lead to reduction of vanadium(V) and give rise to the oxovanadium(IV) pentacoordinate complexes [VOCl₂{R₂NC(S)SSC(S)NR₂}]. However, the reactions of these same thiuram disulphide ligands with [VCl₂(THF)₂] (THF=tetrahydrofuran) cause oxidation of vanadium and to the reduction of the disulphide to the corresponding dithiocarbamate [R₂NCS₂]^–, resulting in new dichlorobis (dithiocarbamate)vanadium(IV) complexes [VCl₂-(R₂NCS₂)₂]. All the compounds have been characterized by elemental analyses, i.r., visible and e.p.r. spectra. Both thiuram disulphides and dithiocarbamate ligands exhibit bidentate     

Isothiocyanatochloromethylphosphonates and Phosphinates – Versatile Synthones for Obtaining of S (Se), N,P–Containing Heterocycles

Abstract

Isothiocyanatochloromethyl(thio)phosphonates and (thio)-phosphinates 1 (X=O, S; R¹ = OPh, CH₂Cl, NCS; R² = H, Cl have been found to be convenient starting material for synthesis of a variety of S (Se), N, P-containing cyclic compounds. They react with different proton containing nucleophiles in the presence of a base with formation of saturated 2 and unsaturated 3 five membered phosphacyclanes. Diisothiocyanatodichloromethylphosphonates 1 (R¹ = NCS, R² =Cl) produce with amines and thiols appropriate bicyclic compounds 4.     

Preparation of complexes formed in the reaction between diironnanocarbonyl and tetraalkyl(phenyl)diphosphine disulfides,R2P(S)P(S)R2 (R=Et,n -Pr,n -Bu,Ph)

Fe₂(CO)₉ and R₂P(S)P(S)R₂ (R = Et, n-Pr, n-Bu, Ph) react to form two types of cluster complexes Fe₃(CO)₉(μ₃-S)₂ (1), Fe₂(CO)₆(μ-SPR₂)₂ (2A)–(2D), [2A, R = Et; 2B, R = n-Pr; 2C, R = n-Bu; 2D, R = Ph]. The complexes result from phosphorus–phosphorus bond scission; in the former sulfur abstraction has also occurred. The complexes have been characterized by elemental analyses, FT-IR and ³¹P-[¹H]-NMR spectroscopy and mass spectrometry.     

Zur Kenntnis gemischter Dicyanamido- (Thio)Cyanato-Kobaltate (II)

Mixed Dicyanamido (thio) cyanato-cobaltates(II) Preparation and properties of mixed anionic pseudohalide-complexes of cobalt(II) [CoX₂Y₂]^2? and [CoX₃Y]^2? (X = NCS, NCO, Y = N(CN)₂) are reported. The structures of the complexes are discussed using the results of infrared and electronic spectroscopy and of magnetic measurements.     

Fragmentation mechanism for the loss of XCY (X and Y = O,OR, S) from 2-phenyl-1,3,4-oxadiazole-5-one and related sulfur-containing compounds

The fragmentation mechanism for loss of X?C?Y (X and Y = O or S) from 2-phenyl-1-3-4-oxadiazole-5-one and related sulfur-containing compounds begins with the breaking of the C? N bond of the heterocyclic ring. Then a X?C?Y molecule is ejected with the initial formation of a non-rearranged ion. The major part of ΔH_R⁰ is associated with the stabilization of this neutral fragment. The initial fragment ion is further rearranged before it decomposes.     

Predicting Stable Molecular Structures for (RNC)2AuIX Complexes

Calculations have been performed at the MP2 and DFT levels for investigating the reasons for the difficulties in synthesizing bis(isocyanide)gold(I) halide complexes. Three‐coordinated gold(I) complexes of the type (R₃P)₂Au^IX ( 1 ) can be synthesized, whereas the analogous isocyanide complexes (RNC)₂Au^IX ( 2 ) are not experimentally known. The molecular structures of (R₃P)₂Au^IX (X = Cl, Br, and I) and (RNC)₂Au^IX with X = halide, cyanide, nitrite, methylthiolate, and thiocyanate are compared and structural differences are discussed. Calculations of molecular properties elucidate which factors determine the strength of the gold‐ligand interactions in (RNC)₂Au^IX. The linear bonding mode of RNC favors a T‐shaped geometry instead of the planar Y‐shaped trigonal structure of (R₃P)₂Au^IX complexes that have been synthesized. An increased polarity of the Au–X bond in 2 leads to destabilization of the Y‐shaped structure. Chalcogen‐containing ligands or cyanide appear to be good X‐ligand candidates for synthesis of (RNC)₂Au^IX complexes.     

A theoretical study of the activation of methane by Gold(III) homoleptic complexes

The density functional theory method with the PBE functional, SBK pseudopotential, and extended basis sets was used to study the reaction between methane and gold(III) homoleptic complexes, namely, [AuX₄]^? (X = Cl, Br, I, H, CN, NH₂, OH, CH₃, and SH), [Au(X(CY)₂X)₂]^? (X = S, Y = H; X = Y = O), Au₂Cl₆, [Au(X₂(CY))₂]⁺ (X = S, Y = NH₂; X = O, Y = H), and [Au(acac)₂]⁺, with the formation of electrophic substitution products. The activation of methane under mild conditions was found to be uncharacteristic of anionic and neutral complexes. According to calculations of cationic oxygen-containing complexes, the formation of methane complexes is possible in their reactions with methane. The energy barrier to this reaction noticeably decreases because of the activation of the C-H bond in this complex. The heat effects vary widely depending on the nature of the ligand. There is, however, no obvious correlation between their values and the activation energy of the reaction.     

Reactivity of radicals CCl3(CH2CHR)n (R=H,CH3, Cl; n=1, 2) in addition reactions with unsaturated compounds

Using EPR spectroscopy, the rate constants for the addition of radicals CC1₃(CH₂· CH₂)_n, (R¹ for n=1 and R² for n=2), CCl₃CH₂CHCH₃ (R³), and CCl₃CH₂CHCl (R⁴) to unsaturated compounds CH₂=CHX (X=C₆H₅, COOCH₃, CN) and CH₂=C(CH₃)Y (Y=C₆H₅, COOCH₃) at 22C have been determined. The radicals R¹ and R² exhibit ambiphilic, and R⁴ electrophilic character towards the selected unsaturated compounds. It has been shown that the presence of the CCl₃ group in the -position of the radical center has little effect on the reactivity of the radical. Replacement of a hydrogen on the -carbon in radical R¹ by a CH₃ group or chlorine atom leads to a considerable reduction in the rate of addition of the radicals to the unsaturated compounds examined.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 3, pp. 548–554, March, 1991.     

Phosphoniumsalze mit Hydrogendihalogenidanionen HCl2−, HBr2− Hl2− oder HBrCl−

Phosphonium Salts with Hydrogen Dihalide Anions HCl₂^?, HBr₂^?, HI₂^?, or HBrCl^? Phosphonium hydrogen dihalides [R₃PR′][XHY] (X = Y = Cl, Br, I; X = Br, Y = Cl) resp. [R₃PH]HBr₂ are obtained as extremely hydrolyzable crystals by reaction of phosphonium halides or tertiary phosphanes with hydrogen halide. According to IR spectroscopic results the solid compounds mostly contain anions [XHX]^? with symmetric hydrogen bonds. In solution ¹H NMR measurements show a slight (X = Cl, Br) or considerable (X = I) dissociation according to HX₂^? ? X^? + HX. On heating the solid compounds decompose with formation of hydrogen halide and [R₃PR′]X or [R₃PH]X. In this process the hydrogen bromidechlorides [R₃PR′][BrHCl] exclusively eliminate HCl. NMR studies (¹H und ³¹P) with solutions containing [R₃PH]HBr₂ (R = phenyl, 1-naphtyl) or HBr and Ph₃P in varying molar ratios show that a fast proton exchange between the competing Lewis bases R₃P and Br^? exists.     

Urea-water-anion Lattices Part 1. Crystal structures of (C2H5)4N+X−·(NH2)2CO·2 H2O (X=Cl,Br, CN), an isomorphous series of layer-type inclusion complexes

The title ternary complexes (1, X=Cl;2, X=Br;3, X=CN) have been prepared and characterized by X-ray crystallography. Crystal data: space groupP2₁/n,Z=4;1,a=7.505(2),b=14.556(4),c=14.453(3) Å, =98.13(2)^o, andR _F=0.088 for 1831 observed MoK data;2,a=7.483(1),b=14.643(6),c=14.443 Å, =98.25(2)^o, andR _F=0.113 for 923 data;3,a=7.490(2),b=14.646(5),c=14.594(5) Å, =98.85(5)^o, andR _F=0.082 for 915 data. In the isomorphous crystal structure of1 and2, ordered (C₂H₅)₄N⁺ cations are sandwiched between puckered layers matching the (020) family of planes, each being constructed from the cross-linking of planar zigzag chains of hydrogen-bonded urea molecules by the water molecules and halide ions. Compound3 has the same structure except that its cyanide group is disordered. Supplementary Data relating to this article are deposited with the British Library as Supplementary Publication No. SUP 82066 (30 pages).Operated under contract DE-AC02-76CH00016 with the U.S. Department of Energy, Office of Basic Energy Science.     

STEREOCHEMISTRY OF (R)-2-METHYLAZIRIDINE COMPLEXES OF COBALT(III) AND DIMERIZATION OF THE LIGAND

Abstract

A cobalt(III) complex containing (R)-2-methylaziridine (R-meaz), [Co(R-meaz)(NH₃)₅]³⁺, was prepared and the two diastereomers arising from the presence of the chiral nitrogen atom (N(R) and N(S)) were separated by column chromatography. Molecular mechanics calculations estimated the N(R)-isomer to be more stable. This result was supported by the x-ray structure determination of the more abundant (ca. 94%) isomer, N(R)-[Co(R-meaz)(NH₃)₅]Br₃H₂O. Crystal data: monoclinic, P2₁, a = 7.357(1), b = 9.780(1), c = 10.426(1) Å, μ = 93.58(1)°, V= 748.7(3) ų, Z= 2. Kinetic studies of isomerization (epimerization) between the two isomers revealed that inversion at the nitrogen center was very slow (5 × 10^?2 M^?1 S^?1at 25 °C). The small rate constant seems to be related to the strained three-membered structure of the meaz ligand. The reaction of Na₃[Co(N0₂)6] and R-meaz yielded a complex containing two dimerized R-meaz chelates, trans-[Co(NO₂)2(di-R-meaz)₂] (di-R-meaz =RR)-α,2-dimethyl-l-aziridineethanamine). The crystal strucrure of trans-[Co(NO₂)₂ (di-R-meaz)₂]C1O₄H₂O was established by x-ray crystallography. Crystal data: orthorhombic, P2₁2₁2₁, a = 11.784(6), b = 21.023(9), c = 8.608(7) Å, V = 2133(2) ų, Z = 4.     

Über den Phosphandiyl‐Transfer von invers‐polarisierten Phosphaalkenen R1P=C(NMe2)2 (R1 = tBu,Cy, Ph,H) auf Phospheniumkomplexe [(η5‐C5H5)(CO)2M=P(R2)R3] (R2 = R3 = Ph; R2 = tBu,R3 = H; R2 = Ph,R3 = N(SiMe3)2)

Phosphanediyl Transfer from Inversely Polarized Phosphaalkenes R¹P=C(NMe₂)₂ (R¹ = tBu, Cy, Ph, H) onto Phosphenium Complexes [(η⁵‐C₅H₅)(CO)₂M=P(R²)R³] (R² = R³ = Ph; R² = tBu, R³ = H; R² = Ph, R³ = N(SiMe₃)₂) Reaction of the freshly prepared phosphenium tungsten complex [(η⁵‐C₅H₅)(CO)₂W=PPh₂] ( 3 ) with the inversely polarized phosphaalkenes RP=C(NMe₂)₂ ( 1 ) ( a : R = tBu; b : Cy; c : Ph) led to the η²‐diphosphanyl complexes ( 9a‐c ) which were isolated by column chromatography as yellow crystals in 24‐30 % yield. Similarly, phosphenium complexes [(η⁵‐C₅H₅)(CO)₂M=P(H)tBu] (M = W ( 6 ); Mo ( 8 )) were converted into (M = W ( 11 ); Mo ( 12 )) by the formal abstraction of the phosphanediyl [PtBu] from 1a . Treatment of [(η⁵‐C₅H₅)(CO)₂W=P(Ph)N(SiMe₃)₂] ( 4 ) with HP=C(NMe₂)₂ ( 1d ) gave rise to the formation of yellow crystalline ( 10 ). The products were characterized by elemental analyses and spectra (IR, ¹H, ¹³C‐, ³¹P‐NMR, MS). The molecular structure of compound 10 was elucidated by an X‐ray diffraction analysis.     

Synthesis and reactivity of new methylallylpalladium(II) complexes with bidentate 2-(methylthio-N-benzylidene)anilines

This work describes the synthesis, characterisation and reactivity of new methylallyl Pd(II) complexes that contain bidentate 2-(methylthio-N-benzylidene)anilines as ligands. The reaction of the binuclear complex [(η³-Me-allyl)Pd(μ-Cl)₂] with AgBF₄ causes the total abstraction of the chloride bridges, with the subsequent formation of an intermediary fragment of Pd(II). This fragment in turn reacts with neutral bidentate 2-(methylthio-N-benzylidene)anilines to give cationic complexes of Pd(II) of general formula [(η³-Me-allyl)Pd(η²-S,N-MeSC₆H₄NCHC₆H₄(X)Y)]BF₄ [X=H, Y=H (1); X=F, Y=H (2); X=Me, Y=H (3); X=H, Y=Cl (4); X=H, Y=Me₂N (5); X=H, Y=NO₂ (6)]. The new complexes were characterised by means of elemental analysis, IR, NMR [¹H, ¹⁹F{¹H}, ¹³C{¹H}, ³¹P{¹H}, Dept, ¹H-¹H-COSY, HSQC, HMBC] and mass spectroscopies. The reaction of the Pd(II) complexes with nucleophiles such as NaI, (EtO)₂PS₂K, KCN, KSCN or NaH lead to the deco-ordination of the bidentate ligands to give dimeric or polymeric complexes of Pd(II). The reactivity pattern observed is discussed by a theoretical analysis based on Fukui functions.     

Perhalophenyl complexes of palladium(II) containing keto-stabilized phosphorus ylides of the type Ph2P(CH2)nPPh2CHC(O)R

From suitable perhalophenyl derivatives of palladium(II), viz.: Pd(C₆F₅)₂-(SC₄H₈)₂, [Pd(μ-X′) (C₆X₅)₂]₂(NBu₄)₂, [Pd(μ-Cl)(C₆X₅)(SC₄H₈)]₂ (X = F, Cl, X′ = Cl, Br), new complexes of various types have been prepared, viz.: trans-Pd(C₆F₅)₂(Y)₂, Pd(C₆X₅)₂(Y), PdCl(C₆X₅)(Y) (X = F, Cl). The neutral ligand Y is a keto-stabilized phosphorus ylide of the type Ph₂P(CH₂)_nPPh₂CHC(O)R (n = 1, R = CH₃, C₆H₅; n = 2, R = C₆H₅) acting in a terminal monodentate P-donor or a bidentate chelate P,C-donor mode. The reaction of PdCl(C₆F₅)(Y) complexes with HCl leads to the corresponding PdCl₂(C₆F₅)(YH) complexes in which the phosphonium cation [YH]⁺ behaves as monodentate P-donor at its phosphinic end.IR and ³¹P NMR spectroscopy were used to decide the coordination mode of the ligands and, in some cases, to reveal the presence of two isomers.     

Preparation and Structural Studies of [Mo(N3S2){R2(0)PNP(S)R2}2]

Abstract

The compounds [Mo(N₃S₂){Ph₂(O)PNP(S)Ph₂}₂] 1 [Mo(N₃S₂){ⁱPr₂(O)PNP(S)ⁱPr₂}₂] 2 have been synthesised by treating [MoCl₃(N₃S₂)] with KN(PPh₂S)₂ or KN(PⁱPr₂S)₂. X–Ray structures of 1 and 2 have been solved. On complexation, the MoN₃S₂ ring remained planar, but the Mo(OPNPS)₂ rings are puckered.