Azocalixarenes. 6: Synthesis, complexation, extraction and thermal behaviour of four new azocalix[4]arenes

Four new azocalix[4]arenes {5,11,17,23-tetrakis[(2-hydroxy-5-tert-butylphenylazo)]-25,26,27,28-tetrahydroxycalix[4]arene (1), 5,11,17,23-tetrakis[(2-hydroxy-5-nitro phenylazo)]-25,26,27,28-tetrahydroxycalix[4]arene (2), 5,11,17,23-tetrakis[(2-amino-5-carboxylphenylazo)]-25,26,27,28-tetrahydroxycalix[4]arene (3) and 5,11,17,23-tetrakis[(1-amino-2-hydroxy-4-sulfonicacidnapthylazo)]-25,26,27,28-tetrahydroxycalix[4]arene (4)} have been synthesized from p-tert-butylphenol, p-nitrophenol, p-aminobenzoic acid and 1-amino-2-hydroxy-4-sulphonic acid by diazo coupling reaction with p-aminocalix[4]arene. The resulting ligands (1–4) were treated with three transition metal salts (e.g., CuCl₂·2H₂O, NiCl₂·6H₂O or CoCl₂·6H₂O). Cu(II), Ni(II) and Co(II) complexes of the azocalix[4]arene derivatives were obtained and characterized by UV-vis, IR, ¹H-NMR spectroscopic techniques and elemental analysis. All the complexes have a metal:ligand ratio of 2:1. The Cu(II) and Ni(II) complexes of azocalix[4]arenes are square-planar, while the Co(II) complexes of azocalix[4]arenes are octahedral with water molecules as axial ligands. The solvent extraction of various transition metal cations from the aqueous phase to the organic phase was carried out by using azocalix[4]arenes (1–4). It was found that, azocalix[4]arenes 1, 2 and 3 examined selectivity for transition metal cations such as Ag⁺, Hg⁺ and Hg²⁺. In addition, the thermal stability of metal:azocalix[4]arene complexes were also reported. Dedicated to Prof. Dr. Mustafa Yılmaz on the occasion of his 50th birthday     

[1]Benzofuro[3,2-<Emphasis Type="Italic">c</Emphasis>]pyridine synthesis and coordination reactions

(E)-3-(1-Benzofuran-2-yl)propenoic acid (1) was prepared from 1-benzofuran-2-carbaldehyde under the Doebner’s conditions. The obtained acid was converted to the corresponding azide 2, which was cyclized by heating in diphenyl ether to [1]benzofuro[3,2-c]pyridine-1(2H)-one (3). This compound was aromatized with phosphorus oxychloride to chloroderivative 4 which was reduced with zinc and acetic acid to the title compound 5. [1]Benzofuro[3,2-c]pyridine-2-oxide (6) was synthesized by reaction of 5 with 3-chloroperoxybenzoic acid in dichloromethane. Treatment of 6 with benzoyl chloride and potassium cyanide (Reissert-Henze reaction) was shown to produce the corresponding [1]benzofuro[3,2-c]pyridine-1-carbonitrile (7). The title compound was used for preparation of complexes Cu₂(ac)₄(bfp)₂ (8) and CoCl₂(bfp)₂ (9), where ac=CH₃CO₂⁻ and bfp=[1]benzofuro[3,2-c]pyridine. Both oxygen atom of carboxylate ions is used in the coordination to Cu(II). Thermal properties of the complexes 8 and 9 have been studied by TG and DTA and both complexes exhibited high thermal stability while complex 9 are thermally more stable than complex 8.     

On triazoles XIX: The reaction of 5-amino-1,2,4-triazoles with functionalized acetoacetic esters

Summary Different functionalized alkyl 3-oxo-butyrates (2) were reacted with 5-amino-3-Q-1H-1,2,4-triazoles (1) to yield3 and4 type 1,2,4-triazolo[1,5-a]pyrimidinones. In case of2 (R ¹=methyl,R ²=1-ethoxycarbonylethyl,R ³=ethyl) beside the corresponding derivative4 the unexpected 5,6-dihydro-6,8-dimethyl-7-ethoxycarbonyl-3-methylthio-1,2,4-triazolo[4,3-a]-1,3-diazepin-5(9H)-one (7) was isolated, representing a novel ring system.

---

Über Triazole, 19. Mitt.: Die Reaktion von 5-Amino-1,2,4-triazolen mit funktionalisierten Acetoessigestern

Zusammenfassung Verschiedene funktionalisierte 3-Oxo-buttersäurealkylester (2) wurden mit 5-Amino-3-Q-1H-1,2,4-triazolen (1) umgesetzt, wobei 1,2,4-Triazolo[1,5-a]pyrimidinone der Typen3 und4 erhalten wurden. Im Fall von2 (R ¹=Methyl,R ²=1-Ethoxycarbonylethyl,R ³=Ethyl) wurde neben dem erwarteten Derivat4 das unerwartete 5,6-Dihydro-6,8-dimethyl-7-ethoxycarbonyl-3-me-thylthio-1,2,4-triazolo[4,3-a]-1,3-diazepin-5(9H)-on (7) isoliert, welches ein neues Ringsystem darstellt.

     

An Easy Preparation of Chemically Pure,High-Activity Tritium-Labelled N-Propionylampicillin for the Analysis of Penicillin-Binding Proteins

Abstract

The laboratory preparation of chemically pure, ³H-labelled β-propionylampicillin suitable for studies of the mode of action of β-lactam antibiotics has been investigated. The chemical purity of the labelled antibiotic is a crucial factor for the quantitative determination of penicillin-binding proteins. Ampicillin (D-α-aminobenzylpenicillin) was N-[³H]propionylated by N-succinimidyl [³H]propionate, the labelled reaction products were analyzed by thin-layer chromatography followed by fluorography. The synthesis and the purification of the resulting N-[³H]propionylampicillin have been optimized, the best conditions for the acylation reaction were at pH 8.25 for 2 h, giving both a high yield of the labelled antibiotic and minimal amounts of unwanted by-products. The reaction mixture was fractionated by a two-step procedure, the purified radioactive antibiotic did not contain any residual reactant, especially free ampicillin, or degradation products such as D-α.-[³H]propionamidobenzylpenicilloic acid. This improved procedure allows an easy, fast and rather inexpensive preparation of a good quality radiolabeled antibiotic for studies of penicillin-interacting proteins.     

Novel 99mTc labeled σ receptor ligand as a potential tumor imaging agent

A novel ^99mTc labeled complex, [N-[2-((2-oxo-2-(4-(3-phenylpropyl)piperazin-1-yl)ethyl) (2-mercaptoethyl)amino)acetyl]-2-aminoethanethiolato]Technetium(V) oxide (PPPE-MAMA’-^99mTcO) ([ ^99m Tc]-2) has been designed and prepared based on the integrated approach. The corresponding rhenium complex (PPPE-MAMA’-ReO)(Re-2) has been prepared and characterized. In vitro competition binding assays show moderate affinity of Re-2 towards σ₁ and σ₂ receptors with K _i values of 8.67 ± 0.07 and 5.71 ± 1.88 μmol, respectively. Planar images obtained at 0.5 h, 4 h, 20 h after i.v. injection indicate the accumulation of [ ^99m Tc]-2 in MCF-7 human breast tumor bearing mice at 20 h. Furthermore, the accumulation of [ ^99m Tc]-2 has been inhibited at 20 h after co-injection of [ ^99m Tc]-2 plus haloperidol (1 mg/kg). Biodistribution studies of [ ^99m Tc]-2 display an in vivo tumor uptake of 0.14% ± 0.01% ID/g at 24 h post i.v. injection with a tumor/muscle ratio of 6.02 ± 0.87. The above results suggest that [ ^99m Tc]-2, derived from a previously published lead compound, retains certain tumor uptake and affinity for σ receptors. [ ^99m Tc]-2 may be used as a basis for further structural modifications to develop tumor imaging agents with high affinity for σ receptors.     

Synthesis and structures of pyridoannelated 1,2,3,4-tetrazine 1,3-dioxides

Treatment of 2- and 4-amino-3-(tert-butyl-NNO-azoxy)pyridines with nitrating agents (N₂O₅or NO₂BF₄) afforded the first representatives of pyridoannelated 1,2,3,4-tetrazine di-N-oxides, viz., pyrido[2,3-e][1,2,3,4]tetrazine 1,3-dioxide (9), 7-nitropyrido[2,3-e][1,2,3,4]tetrazine 1,3-dioxide (10), and pyrido[3,4-e][1,2,3,4]tetrazine 2,4-dioxide (11). These compounds were studied by ¹H, ¹³C, and ¹⁴N NMR spectroscopy. The 1:1 complex of compound 10 with benzene was studied by X-ray diffraction analysis.__________Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 11, pp. 2471–2477, November, 2004.     

p-tert-Butyldihomooxacalix[4]arene/p-tert-Butylcalix[4]arene: Transition and Heavy Metal Cation Extraction and Transport Studies by Ketone and Ester Derivatives

The binding properties of two phenylketones (2a and 3a) and two ethylesters (2b and {3b) derived from p-tert-butyldihomooxacalix[4]arene or from p-tert-butylcalix[4]arene, in the cone conformation, towards transition (Ag⁺, Ni²⁺, Cu²⁺, Co²⁺, Zn²⁺, Fe²⁺ and Mn²⁺) and heavy (Cd²⁺, Hg²⁺ and Pb²⁺) metal cations have been determined by extraction studies with metal picrates and liquid membrane transport experiments with the same salts. The affinity of these ligands for Ag⁺ has also been investigated by ¹H NMR spectroscopy. Both ketones are better extractants than the esters, and show a strong preference for Ag⁺, while Cu²⁺ is the most extracted cation with the esters. ¹H NMR titrations with AgSO₃CF₃ indicate 1 : 1 complexes for all ligands, those with ketones are more stable, on the NMR time scale, than those with esters. Both esters are good carriers for Ag⁺, and 2b exhibits the highest transport rate (4.7 mol h^-1) found until now with dihomooxacalix[4]arene derivatives.     

Excellent Ag+ selective receptors: Syntheses and complexation properties of novel biscalix[4]arene with benzalazine groups

By reacting mono-substituted or 1,3-bi-substituted [2-(p-formylphenyloxy)ethyloxy]-p-tert-butylcalix[4]arene (3 or 4) with hydrazine hydrate in ‘1+2’ or ‘2+2’ condensation mode, novel benzalazine-bridging biscalix[4]arenes 5 and 7 were conveniently obtained in the yields of 76 and 81%, respectively. Condensation of compound 4 and salicylide hydrazone gave a novel calix[4]arene benzalazine derivative 6 in the yield of 85%. The structures and conformations of all new compounds were characterised by elemental analyses, ESI-MS, ¹H NMR and ¹H–¹H COSY techniques. Biscalix[4]arene 7 adopts a symmetrical cone conformation with tube cavity. The liquid–liquid extraction experiment showed that all new hosts possessed excellent complexation abilities towards soft metal cations. Compound 7 exhibited high complexation selectivity towards Ag⁺. The Ag⁺/Na⁺ and Ag⁺/Hg²⁺ extraction percentages of host 7 were as high as 73.1 and 54.9, respectively. The UV–vis spectra complexation experiments revealed that the complexation constant of receptor 7 with Ag⁺ was 1.9 × 10⁵ M^? 1 and the 1:1 stoichiometry of receptor 7–Ag⁺ complex was formed. The ¹H NMR spectra complexation experiments suggested that Ag⁺ was bound in a cavity composed of two benzalazine groups on bridging chains.     

Molecular design of calixarene-based ion-selective electrodes

In order to obtain insights into relationships between the calix[4]arene structure and the ion selectivity in the electrode system, 20 ionophoric calix[4]arenes were synthesized and their ion selectivity (with Na⁺ as a standard) estimated. Among these ionophoric calix[4]arenes, 25,26,27,28-tetrakis[(ethoxycarbonyl)methoxy]-p-t-octylcalix[4]arene afforded the highest logK _NA,M ^pot value (–3.1) in the presence of 2-fluorophenyl-2-nitrophenylether (10) as the best of 13 plasticizers. This is the first example in which the Na⁺/K⁺ selectivity exceeds a factor of 10³ in the electrode system based on the neutral carrier. The high Na⁺ selectivity is attributed to modification of the upper rim which ostensibly has no relation with the component of the cavity. This paper demonstrates the potential relationships between the unique structure of the calix[4]arene-based ligands and selectivity performance for the design of ion-selective electrodes.     

[1,3]Dioxolo[5,6][1]benzothieno[2,3-c]-quinolin-6(5H)-ones

Summary The reaction of 3,4-methylenedioxycinnamic acid (1) with thionyl chloride resulted in the formation of 7-chlorothieno[2,3-f]-1,3-benzodioxole-6-carbonyl chloride (2) and cinnamoyl chloride (3). Subsequent reaction of the former withp-substituted anilines led to the formation of 7-chloro-N-(p-substituted phenyl)-thieno[2,3-f]-1,3-benzodioxole-6-carboxamides (4a–c) which on photocyclization afforded 2-substituted [1,3]dioxolo[5,6][1]benzothieno[2,3-c]quinolin-6(5H)-ones (5a–c) in fairly good yields and high purity. The structures have been confirmed by IR,¹H NMR, and analytical methods.Accepted for presentation at the Hong Kong International Symposium on Heterocyclic Chemistry (August 13–16, 1995)     

Features of the reaction of unsymmetrical 2-mercapto-imidazoles with aromatic and aliphatic ketones

The cyclization of unsymmetrical 2-mercaptoimidazoles with aliphatic and aromatic ketones has been studied. Using ¹H NMR and X-ray analysis it has been shown that 4-R¹-1H-2-mercaptoimidazoles undergo selective oxidative cyclization to the corresponding 3-R³-2-R²-6-R¹-imidazo[2,1-b][1,3]thiazoles while 6-R⁴-1H-2-mercaptobenzo[d]imidazoles give a mixture of 6-R⁴-3-R²-2-R³-benzo[4,5]imidazo[2,1-b][1,3]thiazole and 7-R⁴-3-R²-2-R₃-benzo[4,5]imidazo[2,1-b][1,3]thiazole in the ratio 1: 1. __________ Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 1, pp. 115–122, January, 2007.     

The synthesis and characterization of a new (E,E)-dioxime containing 20-membered tetraazadioxa macrocyclic moieties and its mononuclear complexes

A new (E,E)-dioxime, (2Z,3Z)-9,20-bis[(4-methylphenyl)sulfonyl]-1,4,7,8,9,10,11,12,14,15,17, 18,19,20,21,22-hexadecahydro-13,16-ethano[1,4,7,11,14,18]dioxatetraazacycloicosino[2,3-g] quinoxaline-2,3-dione dioxime (6) (H₂L) has been synthesized by reacting cyanogen-di-N-oxide (5) with 4,15-bis[(4-methylphenyl)sulfonyl]-2,3,4,5,6,7,9,10,12,13,14,15,16,17-tetradecahydro-8,11-ethano-1,18,4,8,11,15-benzodioxatetraazacycloicosine-20,21-diamine (4). Mononuclear complexes (7) and (8) of this ligand have been synthesized by reacting the vic-dioxime (H₂L) with NiCl₂.6H₂O and CoCl₂.6H₂O respectively. The BF₂⁺ capped Ni(II) and Co(III) complexes (9) and (10) of the dioxime have been synthesized from (7) and (8), respectively. The new compounds were characterized by a combination of elemental analysis, ¹H- and ¹³C-NMR, IR. and MS. spectral data.     

2-[3-(Trifluoromethyl)phenyl]furo[3,2-b]pyrroles: synthesis and reactions

The synthesis and reactions of methyl 2-[3-(trifluoromethyl)phenyl]-4H-furo[3,2-b]pyrrole-5-carboxylate (1a) are described. Upon reaction with methyl iodide, benzyl chloride, or acetic anhydride, this compound gave N-substituted products 1b-d. By hydrolysis of compounds 1a-c, the corresponding acids 2a-c were formed, or by reaction with hydrazine-hydrate, the corresponding carbohydrazides 3a-c were formed. By heating 2-[3-(trifluoromethyl)phenly]-4H-furo[3,2-b]pyrrole-5-carboxylic acid (2a) in acetic anhydride, 4-acetyl-2-[3-(trifluoromethyl)phenyl]furo[3,2-b]pyrrole (4) was formed. By hydrolysis of 4, 2-[3-(trifluoromethyl)phenyl]-4H-furo[3,2-b]pyrrole (5a) was formed, and reactions with methyl iodide or benzyl chloride gave N-substituted products 5b-c. The reaction of 4 with dimethyl butynedioate gave substituted benzo[b]furan 6. Compound 3a reacted with triethyl orthoesters giving 7a-c, which afforded with phosphorus (V) sulphide the corresponding thiones 8a-c. The thiones 8a-c reacted with hydrazine hydrate to form hydrazine derivatives 9a-c. The reaction of triethyl orthoformiate with compounds 9a-c led to furo[2′,3′: 4,5]pyrrolo[1,2-d][1,2,4]triazolo[3,4-f][1,2,4]triazines 10a-c. Hydrazones 11a-c were formed from 3a-c and 5-[3-(trifluoromethyl)phenyl]furan-2-carboxaldehyde. The effect of microwave irradiation on some condensation reactions was compared with “classical” conditions. The results showed that microwave irradiation shortens the reaction time while affording comparable yields.     

pH-Driven Variation of the Outer-Sphere Binding Mode of cis-[Co(Ad)(en)2Cl]Cl (en-Ethylendiamine, Ad-Adeninate) with p-Sulfonatothiacalix[4]arene

The non-symmetrical cobalt (III) complex cis-[Co(Ad)(en)₂Cl]Cl (1Cl), possessing two flexible ethylendiaminate chelate rings (en) and monodentate N(9)-bound adeninate (Ad^-) was chosen as the guest of p-sulfonatothiacalix[4]arene (STCA) to study the inclusion complex formation at wide range of pH 2–10. It was shown by ¹H, NOE NMR methods and pH-metric procedure, that pH-driven variation of the inclusion mode of 1 ⁺ into calixarene cavity is the result of the protonation of 1 ⁺ via adeninate moiety.     

Calixcrowns and related molecules

The synthesis of 1,2- and 1,3-calix[4]-bis-crowns, double calix[4]arenes and double calixcrowns have been shown to depend on the reaction conditions (nature of the base, structure of the ditosylates, and the stoichiometry of the reactants). The 1,3-alternate conformation of the 1,3-calix[4]-bis-crowns was shown to be favourable to the selective complexation of cesium cation. The observed Na⁺/Cs⁺ selectivity was exploited in separation processes using them as carriers in transport through supported liquid membranes (SLMs). The best Na⁺/Cs⁺ selectivity (1/45 000) was observed for the naphthyl derivative 7. Calix(aza) crowns and 1,3-calix[4]-bis-(aza)-crowns were also produced through the preliminary formation of the Schiff base-calixarenes, which were further hydrogenated. The syntheses consisted of the 1,3-selective alkylation of calixarenes followed by cyclization into a 1,3-bridged calixarene or by the direct 1,3-capping of the calixarene with appropriate ditosylates. Soft metal complexation by these ligands is also presented.This paper is dedicated to the commemorative issue on the 50th anniversary of calixarenes.     

Synthesis and evaluation of multitopic bisbenzothiazolyl calix[4]arenes for ionic toxicants

Abstract

Two new benzothiazolyl calix[4]arene-based multitopic molecular receptors L-1 and L-2 have been synthesised and evaluated for recognition of ionic toxicants. The receptors selectively interact with copper, silver and fluoride ion toxicants as assessed through UV-visible, NMR and colorimetric techniques. The stability of L-1:Cu⁺² and L-2:Cu⁺² complexes was found to be higher than that of complexes formed with Ag⁺ and F^– complexes in the presence of trifluoroacetic acid. Superiority of L-1 over L-2 for analysis of identified toxicants has been determined by measurement of binding constants.     

Structure Determination of an Unusual [2.2]paracyclophane Derivative by NMR Spectroscopy

Our ongoing study on cycloaddition reactions of dienes with different dienophiles afforded a great variety of derivatives with interesting molecular structures and electronic behavior. A new type of angularly annelated [2.2]paracyclophane (3) has been synthesize by the Diels–Alder reaction of 4-(2-propenyl[2.2]paracyclophane (1) and 1,4-benzoquinone (2) under high pressure conditions. The structure determination of this compound has been achieved by NMR measurements and semiempirical calculations.     

Synthesis and Host Properties of (1,3)- p-tert-Butylcalix[5]crown-6 Derivatives Incorporating the 1,1'-Binaphthalene-2,2'-dioxy Subunit

Alkylation of p-tert-butylcalix[5]arene (1) with 2,2'-bis(5-tosyloxy-3-oxa-1-pentyloxy)-1,1'-binaphthalene ((±)-2) in the presence of CsF affords selectively racemic 1,3-bridged calix[5] [5]crown-6-triol 3, along with very small amounts of the (1,2)-bridged regioisomer 4. Compound 3 has been converted into tri-methoxy and tri--picolyloxy derivatives 5 and 6, respectively, by exhaustive alkylation with the appropriate electrophile and base. The direct separation of the enantiomers of racemates 3 and 6 was achieved by HPLC, using a chiral stationary phase (Chiralpak AD). Hosts 5 and 6 are able to selectively form 1 : 1 endo-cavity complexes with the linear RNH₃ ⁺ ions.     

Enantioselective syntheses of no-carrier-added (n.c.a.) (s)-4-chloro-2-[f] fluorophenylalanine and (s)-(α-methyl) -4-chloro-2-[f]fluorophenylalanine

(S)-4-Chloro-2-fluorophenylalanine and (S)-(α-methy)-4-chloro-2-fluorophenylalanine were synthesized and labeled with no carrier added (n.c.a.) fluorine-18 through a radiochemical synthesis relying on the highly enantioselective reaction between 4-chloro-2-[¹⁸F]fluorobenzyl iodide and the lithium enolate of (2S)-1-(tert-butyloxycarbonyl)-2-(tert-butyl)-3-methyl-1,3-imidazolidine-4-one for (S)-4-chloro-2-[¹⁸F]fluorophenylalanine and (2S,5S)-1-(tert-butyloxycarbonyl)-2-(tert-butyl)-3,5-dimethyl-1,3-imidazolidine-4-one for (S)-(α-methyl) -4-chloro-2-[¹⁸F] fluorophenylalanine. Quantities of about 20–25 mCi were obtained at the end of sy nthesi s, ready for injection after hydrolysis and high performance liquid chromatography (HPLC) purification, with a radiochemical yield of 17%–20% corrected to the end of bombardment after a total synthesis time of 90–105 min from [¹⁸F] fluoride. The enantiomeric excesses were shown to be 97% or more for both molecules without chiral separation and the radiochemical and chemical purities were 98% or better.