Persistent polarization in poly(vinylidene fluoride). I. Surface charges and piezoelectricity of poly(vinylidene fluoride) thermoelectrets

Persistent polarization in poly(vinylidene fluoride) (PVDF) thermoelectrets prepared under high electric field strengths has been studied by measurements of surface charge and piezoelectricity. An anomalous heterocharge appears after the normal homocharge disappears. A model is proposed to explain the surface charge phenomena; the anomalous heterocharge is expressed as a sum of a hidden homocharge and a hidden heterocharge. It is concluded that the anomalous heterocharge as well as the apparent homocharge are not responsible for the piezoelectricity of PVDF electrets. The piezoelectricity is shown to depend on the structure of the original PVDF films or the amount of β-form crystals. However, the piezoelectricity is not attributed to stress dependence of the spontaneous polarization in the β-form crystal of PVDF, but to the hidden polarization which bring about the anomalous heterocharge. The hidden polarizations are attributed to trapped charges.     

Effect of poly(ethylene glycol) on the dielectric properties of poly(vinylidene fluoride)/BiFeO<Subscript>3</Subscript>/poly(ethylene glycol) composite films for electronic applications

In the present work a series of poly(vinylidene fluoride)/BiFeO₃/poly(ethylene glycol) composite films were prepared by solvent casting method with poly(vinylidene fluoride) as polymer matrix, bismuth ferrite as ceramic filler and poly(ethylene glycol) as binding agent as well as enhancer. The structural analysis of the composite films by X-ray diffraction confirms that the composites have a distorted rhombohedral structure. The micro-structural analysis shows that the use of poly(ethylene glycol)in the composite films enhances the homogeneity as well as compatibility of BiFeO₃ particles within the poly(vinylidene fluoride) matrix. The dielectric and electrical study done by impedance analyzer reveals that with an increase in poly(ethylene glycol) concentration, there is a subsequent increase in dielectric constant as well as AC electrical conductivity. Finally, the ferroelectric behavior of the composite confirms that the ferroelectric properties of the composites are enhanced by the addition of BiFeO₃ with an increase in poly(ethylene glycol) concentrations. These preliminary results give an idea for possible applications of this type of composites in the field of electronic applications.     

Micropatterning of the Ferroelectric Phase in a Poly(vinylidene difluoride) Film by Plasmonic Heating with Gold Nanocages

Polymer thin films with patterned ferroelectric domains are attractive for a broad range of applications, including the fabrication of tactile sensors, infrared detectors, and non‐volatile memories. Herein, we report the use of gold nanocages (AuNCs) as plasmonic nanostructures to induce a ferroelectric–paraelectric phase transition in a poly(vinylidene fluoride) (PVDF) thin film by leveraging its photothermal effect. This technique allows us to generate patterned domains of ferroelectric PVDF within just a few seconds. The incorporation of AuNCs significantly enhances the pyroelectric response of the ferroelectric film under near‐infrared irradiation. We also demonstrate the use of such patterned ferroelectric films for near‐infrared sensing/imaging.     

Heat capacity of fluoropolymers

The heat capacities of poly(vinyl fluoride), poly(vinylidene fluoride), and polytrifluoroethylene have been measured between 80 and 340°K. The results can be expressed as the sum of two terms: the optical contribution calculated from the vibrational band assignments in the literature and the acoustical contribution calculated according to the Tarasov continuum model. Combining our data with those for polyethylene and polytetrafluoroethylene, it is concluded that the force constant for one-dimensional intrachain interaction is approximately constant for all polymers with carbon backbones. The force constant for three-dimensional interchain interaction is one order of magnitude smaller than the one-dimensional force constant, and decreases when the hydrogen atoms in polyethylene are replaced by fluorine atoms. The thermodynamic functions for the three polymers have been evaluated. Glass transitions at 228°K and 305°K have been found in poly(vinylidene fluoride) and polytrifluoroethylene, respectively.     

Increase in crystallinity in poly(vinylidene fluoride) by electron beam radiation

We examine the influence of high-energy radiation and subsequent aging and orientation on the degree of crystallinity of poly(vinylidene fluoride) (PVDF) films. In particular, PVDF films were exposed to electron beam radiation (doses up to 50 Mrad) and aged at room temperature for varying lengths of time followed by uniaxial orientation. The degree of crystallinity of these films was found to increase significantly with increasing radiation dose. In addition, a further substantial increase in the degree of crystallinity was observed upon subsequent aging of irradiated films at room temperature. Upon orientation, in addition to a further rise in the degree of crystallinity, the crystallites were observed to undergo the α form → β form transformation, the latter phase being the polar phase effective for piezo-electric/pyroelectric activity.     

Oligo(vinylidene fluoride) Langmuir-Blodgett films studied by spectroscopic ellipsometry and the density functional theory

Thin films of amphiphilic vinylidene fluoride oligomers prepared by Langmuir-Blodgett deposition on silicone substrates were investigated by comparing experimental and theoretical mid-infrared (IR) spectra. The experimental spectra were obtained using infrared spectroscopic ellipsometry. Theoretical spectra were calculated using density functional theory. Excellent correspondence of major IR bands in both data sets shows that the molecular backbone is oriented with the long axis normal to the substrate plane. This is in contrast to poly(vinylidene fluoride) LB films, in which the polymer chains are parallel to the substrate.     

压电高分子材料

本文介绍了有关压电性高分子材料研究的新进展及近几年来对于聚偏腈乙烯、聚酰胺、聚氯乙烯、聚磷腈等压电性的研究结果,并就高分子偶极结构、结晶性等因素与其压电性的关系进行了讨论.     

Aging of piezoelectricity in poly(vinylidene fluoride)

This report describes isothermal aging of piezoelectricity in poly(vinylidene fluoride) (PVDF) based on long-term heat treatments between 40 and 160°C. The results demonstrate that no piezoelectric decay occurs below about 60°C, that between 60 and 160°C the aging behavior follows logarithmic kinetics, and that aging is linearly dependent on temperature. Both uniaxial and biaxial PVDF show similar trends, but piezoelectric decay is more rapid for uniaxial film. Decay of permanent poling-induced polarization is identified as the likeliest cause of piezoelectric aging, and piezoelectric decay is found to be associated with long-range annealing effects which also produce macroscopic shrinkage of the PVDF film.     

Microhardness measurements of poly(methyl methacrylate) and poly(vinylidene fluoride) polyblends

The preparation of polymer blends of poly(methyl methacrylate) and poly(vinylidene fluoride) in different weight percentages is described. Vickers microhardness measurements have been made to study the effects of load and compositional ratio of the two polymers in polyblend. It is observed that poly(vinylidene fluoride) acts as a plasticizer for poly(methyl methacrylate). Evidence of increasing and decreasing strength of polyblends has been obtained for different compositional ratios of the two polymers.     

聚偏氟乙烯的辐射交联及其交联度的XPS表征

本文首次用XPS研究了聚偏氟乙烯的辐射交联机理,交联度的XPS表征。计算出聚偏氟乙烯的β值为0.7,发现聚偏氟乙烯的辐射交联的溶胶分数与辐照剂量的关系符合我们提出的通式^[1]。用XPS方法求得聚偏氟乙烯的凝胶化剂量为1.59mrad。     

Crystallization behavior and electroactive properties of PVDF,P(VDF-TrFE) and their blend films

PVDF, poly(vinylidene fluoride), as a semi-crystalline polymer, has interesting electroactive properties but usual melt and solution processing techniques result in its thermodynamically favored non-polar α-phase. By comparison, poly(vinylidene fluoride-trifluoroethylene) P(VDF-TrFE), PT for short, directly crystallizes in the polar β-phase under the same conditions as PVDF. In this study, blend thin films comprising PVDF and P(VDF-TrFE) were prepared by solvent casting method. The difference in the crystallization behavior is comprehensively investigated between the polymers: PVDF, P(VDF-TrFE), and the resulting blend films. It is found that replacement of the fluoride atom in TrFE monomer induces a strong steric hindrance that may alter the crystallization process to become more favorable for nucleation of the PVDF β-phase. To figure out the effect of TrFE content on the crystallization behavior and electroactive properties, films with different blend ratios of PVDF and P(VDF-TrFE) were prepared. We found that the PVDF films exhibit higher crystallization activation energy (ΔE) as PT content increases. The atomic force microscopy (AFM) in the piezoresponse force microscopy (PFM) mode illustrated that P5T5 films with equal contents of PVDF and P(VDF-TrFE) induced the highest d₃₃ values.     

Rotational isomerism and physical properties of long-chain molecules in solid states

Rotational isomerism occurring in solid state of organic long-chain compounds, including synthetic linear polymers, have been concerned in connection with the macroscopic physical properties of bulk materials. The conformational order in the non-crystalline part of polyethylene has been investigated by Raman spectra, and related to the elastic behaviors of bulk samples. In the solid-state phase transition induced by mechanical forces of poly(butylene terephthalate) the macroscopic strain has been related directly to the conformational conversion of the molecules. Concerning the piezoelectric and pyroelectric activities of poly(vinylidene fluoride), polymorphism, phase transition, and structural change on the poling process have been investigated. A ferroelectric-paraelectric phase transition has been found for a series of copolymers of vinylidene fluoride and trifluoroethylene. On the phase transition a great change in molecular conformation is accompanied with the scrambling of the dipolar orientation. This is the characteristic of polymer ferroelectrics in which the dipolar units are linked with each other by covalent bonds in a molecular chain. Spectroscopic evidences are presented indicating that the thermodynamic stability of polymorphs of n-fatty acids is closely related to the rotational isomerism occurring in the carboxyl groups.     

Persistent polarization in poly(vinylidene fluoride). III. Depolarization and pyroelectricity of poly(vinylidene fluoride) thermoelectrets

Persistent polarization in poly(vinylidene fluoride) thermoelectrets prepared under high electric field has been studied by measurements of depolarization and pyroelectricity. Various polarizations are examined in detail; the polarizations related to a characteristic molecular motion near 60°C and the polarizing temperature are not responsible for the major piezoelectric effect in β-form electrets. The piezoelectricity is attributed to a polarization appearing near the melting temperature. The persistent polarization corresponding to d₃₁ of 2 × 10^?11 coul/N is about 5 × 10^?6 coul/cm². The pyroelectricity of β-form electrets is linearly correlated with the piezoelectricity.     

脱氟化氢聚偏氟乙烯膜的制备, 表征和导电性能的研究

聚偏氟乙烯(PVDF)膜与一些有机弱碱作用脱氟化氢(HF)生成表面为一氟乙炔(PFA)的膜。红外、紫外可见光谱分析表明脱HF的PVDF膜的共轭链结构比较规整。X光电子能谱、反应深度和接触度的分析表明, PVDF脱HF反应主要发生在膜表面。脱HF的PVDF膜(PFA)经各种掺杂剂掺杂后电导率上升5~6个数量级, 最高可达10^-^4s/cm, 且在掺杂过程中出现出的性质不同于聚乙炔。     

Shear piezoelectricity in single‐wall carbon nanotube/poly(γ‐benzyl‐L‐glutamate) composites

Single‐wall carbon nanotubes (SWCNTs) have been added to high molecular weight poly(γ‐benzyl‐L ‐glutamate), or PBLG, to evaluate their effects on the polymer's shear piezoelectricity. While the addition of SWCNTs increased various PBLG physical properties such as electrical conductivity, dielectric constant, several mechanical properties, and electrostriction coefficient, the shear piezoelectricity remained constant up to a 0.3 wt % SWCNT concentration. The composite crystallinity, orientation, and SWCNT alignment (measured by X‐ray diffraction, birefringence, and polarized Raman spectroscopy, respectively) were found to be constant up to this same concentration, corroborating the shear piezoelectric findings. PBLG composites made with acid‐treated (and therefore less electrically conductive) SWCNTs exhibited similar shear piezoelectric behavior, indicating that neither the SWCNT type, concentration (up to the percolation threshold), nor electrical conductivity influences PBLG shear piezoelectricity. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2010     

Piezoelectricity of uniaxially stretched poly(vinylidene fluoride) corona poled at elevated temperature

X-ray diffraction, thermally stimulated depolarization, and piezoelectric current measurements have been carried out on uniaxially stretched poly(vinylidene fluoride) film, corona poled both negatively and positively at room temperature and at 90°C. Corona poling at elevated temperature considerably enhances the piezoelectric constant and is a more efficient way of charging the film than conventional thermal poling. Advantages over the latter are discussed.     

Simple synthesis of palladium nanoparticles, β-phase formation, and the control of chain and dipole orientations in palladium-doped poly(vinylidene fluoride) thin films

Palladium nanoparticles (Pd-NP's) are prepared by a simple one-step procedure when poly(vinylidene fluoride) (PVDF) is used as a polymer stabilizer. High-quality Pd-NP-doped PVDF thin films are fabricated where the heat-controlled spin-coating technique is adopted. The effect of Pd-NP's on the crystal modifications and lamellae orientation in PVDF films is investigated using Fourier transform infrared-grazing incidence reflection absorption spectroscopy. The electroactive β phase and edge-on crystalline lamellae are found to be formed preferentially in Pd-NP-doped PVDF films. As a result, Pd-NP-doped PVDF ultrathin films gave a very good discernible contrast between the written and erased data bits, which suggests that they can be used as a scanning-probe-microscopy-based ferroelectric memory device or a ferroelectric gate field-effect transistor memory device in the future.     

A facile approach to obtaining PVDF/graphene fibers and the effect of nanoadditive on the structure and properties of nanocomposites

The key factors in the design of nanocomposites include obtaining a good adhesion between components and homogeneous dispersion of the nanoadditive in the polymer matrix. Direct mixing of graphene with polymers which are then processed by melt compounding method results in strong tendency of nanoadditive to agglomerate. The article presents a new approach to obtaining poly(vinylidene fluoride)/graphene (PVDF/rGO) nanocomposites in the form of fibers. This method is characterized by the use of graphene oxide (GO) dispersed in the plasticizer instead of graphene. The combination of the fibers forming process with simultaneous reduction of GO to rGO allowed the authors to obtain nanocomposites with graphene homogeneously dispersed in the polymer matrix. Moreover, addition of graphene resulted in formation of β-phase in the nanocomposites, which is characteristic for PVDF and responsible for pyroelectric and piezoelectric properties of this polymer.     

Relationship between piezoelectricity and superstructure in highly oriented poly(vinylidene fluoride) film prepared by zone drawing

The oriented superstructure of poly(vinylidene fluoride) is controlled by using a forced-quenching type of zone drawing apparatus. Systematic variation of the weight fraction χ(I) of form-I crystals and the orientation function f_a of amorphous chains shows that the piezoelectricity increases with increasing χ(I) and f_a. A change in the state of molecular aggregation during poling is also effective in increasing the piezoelectricity and the orientation of the crystal b axis along the poling direction. Equations relating piezoelectricity to the form-I crystallinity, the orientation of amorphous chains, and the orientation of the crystal b axis along the poling direction are derived. These are based on a mechanical model having regions of taut tie molecules in parallel with composite regions consisting of crystalline and amorphous blocks in series.     

Study of a plasticized‐unoriented P(VF2/VF3) (73/27 mol%) copolymer. I. The effects of crystallization conditions on morphology,physical, and thermal properties

The results of a study on the effects of a plasticizer, tricresyl phosphate, on the mechanical and thermal properties of unoriented films of poly(vinylidene fluoride–trifluoroethylene) (VF₂/VF₃) copolymer (73/27 mol%) are presented. Films were prepared by both quenching and slow‐cooling from the melt with plasticizer concentrations of 0, 5, and 10% by weight. For the slow‐cooled films, a reduction in crystallinity by 25% was observed for the heavily plasticized films, together with a reduced dynamic mechanical modulus (≈ 58%) and an increased dielectric constant (≈ 200%). For the quenched films, a small increase in crystallinity was observed together with a reduced modulus and an increased dielectric constant. Measurements of the temperature dependence of the modulus and dielectric constant at 10 Hz. were also carried out from −100°C to 100°C. This data showed that for slow‐cooled films the glass transition temperature decreased from −28°C to ‐52°C at the highest doping level. DSC thermal analysis shows a decrease in the Curie transition (≈ 4°C) and melting temperatures (≈ 9°C) for the quenched films, while the slow‐cooled films only showed a decrease in melting temperature (≈ 10°C), while the Curie transition temperature was unaffected. In addition, evidence of a two‐phase system or a nonferroelectric crystal phase is noted by the presence of two Curie transition temperature peaks. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 19–28, 1999