An Efficient Procedure for the Synthesis of Benzoxazole and Benzothiazole Derivatives Using a H2O2/SiO2-FeCl3 System

A series of benzoxazole and benzothiazoles was readily prepared from the reaction of ortho-aminophenol/ortho-aminothiophenol and aldehydes using solid silica supported ferric chloride (SiO₂-FeCl₃) as catalyst followed by oxidation with H₂O₂ under ambient conditions. Some of advantages of this method are a simple and convenient procedure, easy purification, and shorter reaction times.

Supplemental materials are available for this article. Go to the publisher's online edition of Phosphorus, Sulfur, and Silicon and the Related Elements to view the free supplemental file.     

Syntheses and characterization of two oxoborates, (Pb3O)2(BO3)2MO4 (M=Cr, Mo)

Two oxoborates, (Pb₃O)₂(BO₃)₂MO₄ (M=Cr, Mo), have been prepared by solid-state reactions below 700 °C. Single-crystal XRD analyses showed that the Cr compound crystallizes in the orthorhombic group Pnma with a=6.4160(13) Å, b=11.635(2) Å, c=18.164(4) Å, Z=4 and the Mo analog in the group Cmcm with a=18.446(4) Å, b=6.3557(13) Å, c=11.657(2) Å, Z=4. Both compounds are characterized by one-dimensional chains formed by corner-sharing OPb₄ tetrahedra. BO₃ and CrO₄ (MoO₄) groups are located around the chains to hold them together via Pb–O bonds. The IR spectra further confirmed the presence of BO₃ groups in both structures and UV–vis diffuse reflectance spectra showed band gaps of about 1.8 and 2.9 eV for the Cr and Mo compounds, respectively. Band structure calculations indicated that (Pb₃O)₂(BO₃)₂MoO₄ is a direct semiconductor with the calculated energy gap of about 2.4 eV.     

NH3-SCR脱硝催化剂抗硫性能的研究进展

氮氧化物(NO_x)是一种重要的大气污染物, 它造成严重的环境问题, 同时威胁人类健康. 以钢铁烧结烟气为代表的固定源和以柴油机尾气为代表的移动源是氮氧化物的主要来源. 氨气选择性催化还原法(NH₃-SCR)是目前最有效且应用最广泛的NO_x脱除技术. 然而, 无论是固定源还是移动源上NH₃-SCR催化剂, 都不可避免地会被SO₂毒化, 造成催化剂失活, 限制了NH₃-SCR技术的进一步应用. 因此, 研究NH₃-SCR催化剂的SO₂中毒机制以及提高催化剂的抗硫性能至关重要. 我们对固定源脱硝的金属氧化物和移动源上脱硝的Cu基分子筛这两类不同催化剂体系的SO₂中毒机制的研究进展进行了介绍, 并对这两种催化剂上提高抗硫性能改性方法的研究进展进行了评述, 为未来的研究提供了参考.     

The compounds KAs4O6 X (X=Cl,Br, I) and NH4As4O6 X (X=Br,I): Hydrothermal syntheses and structure determinations

The crystal structures of five isotypic hexagonal compounds with general formulaMAs₄O₆ X [M=K, NH₄;X=Cl, Br, I; space group: P622;Z=1] were determined from 370 single crystal X-ray data and refined toR values <0.05. The structure type is characterized by neutral charged [As₂O₃] sheets arranged parallel (00.1). The As atoms of neighbouring two sheets point to each other and the sheets are combined by interlayeredM andX atoms, respectively. TheM atoms are coordinated to twelve oxygen atoms, theX atoms are coordinated to twelve arsenic atoms. In both cases the coordination polyhedron is a hexagonal prism. The compounds were synthesized by thermal treatments of cubic As₂O₃ and potassium or ammonium haloids in a saturated aqueous solution of potassium acetate resp. ammonia [500 K, saturation vapour pressure].

---

Die Verbindungen KAs₄O₆ X (X=Cl, Br, I) und NH₄As₄O₆ X (X=Br, I): Hydrothermalsynthese und Strukturbestimmung

Zusammenfassung Die Kristallstrukturen der fünf isotypen hexagonalen Verbindungen mit der allgemeinen FormelMAs₄O₆ X [M=K, NH₄;X=Cl, Br, I; Raumgruppe: P622;Z=1] wurden anhand von 370 Einkristall-Röntgendaten bestimmt und aufR-Werte <0.05 verfeinert. Der Strukturtyp ist ausgezeichnet durch neutrale [As₂O₃]-Schichten, die parallel (00.1) angeordnet sind. Die As-Atome zweier benachbarter Schichten weisen jeweils aufeinander zu, und die Schichten selbst werden durch zwischengelagerteM- bzw.X-Atome verbunden. DieM-Atome werden jeweils von zwölf O-Atomen, dieX-Atome von zwölf As-Atomen umgeben. Das Koordinationspolyeder ist in beiden Fällen ein hexagonales Primsa. Die einzelnen Verbindungen wurden unter Hydrothermalbedingungen aus kubischem As₂O₃ und dem jeweiligen Kalium- oder Ammoniumhalogenid in einer gesättigten wäßrigen Lösung von Kaliumacetat bzw. Ammoniak synthetisiert (500 K, Sättigungsdampfdruck).

     

合成方法对Rh/CeO2-ZrO2-La2O3催化剂的结构、表面性能及DeNOx活性的影响

用沉积沉淀法合成两种不同系列的CeO2-ZrO2-La2O3混合氧化物(ZrO2和La2O3沉积CeO2粒子(标记为A-x)以及CeO2和La2O3沉积ZrO2粒子(标记为B-x)),并用作Rh催化剂的载体。XRD、拉曼、TPR、XPS和O2脉冲等表征结果显示出不同的沉积顺序将导致不同的结构和氧化还原性能,且B-x具有更高的氧迁移性、储氧能力和表面Ce浓度。当其负载Rh后,Rh/B-x催化剂具有更高的NO和CO转化率及N2选择性,且Ce的最佳含量为50at%。这可能归因于Rh负载于富铈表面形成更多有利于NO分解的表面Ce3+活性位。     

Thermodynamic analysis of equilibria between binary liquid and solid solutions in ternary systems. Application to systems in which two guests compete for sites in the same host,tetrakis(4-methylpyridine)nickel(II) isothiocyanate

A thermodynamic analysis is presented of the equilibria between liquid solutions of guest A in guest B and solid solutions of HA in HB, where HA and HB are isomorphous 1:1 compounds of these guests with the host H. (The treatment is applicable whether or not HA and HB are inclusion compounds.) The mole ratio of A to B in the liquid,R ₁, is generally different from the same ratio in the solid,R _s. Data on many systems have indicated a linear relation between InR ₁, and InR _s, but to date no theoretical basis has been forthcoming. The present analysis shows that this relation is usually sigmoidal in shape but, with certain restrictions, is nearly linear. The slope and intercept are interpreted in terms of the equilibrium constant for the displacement of A from HA by B and the deviations from ideality in the liquid and solid phases. If the deviations from ideality in the liquid phase are known or can be estimated, those for the solid phase can be determined, and thermodynamic equilibrium constants and standard free energy changes for the displacement of A by B calculated. These methods were applied to available data for the following pairs of guests with the host Ni(4-mepy)₄(NCS)₂:p-xylene with each ofp-dibromobenzenp-xylene-d₆,p-xylene-d ₁₀,p-bromotoluene,p-chlorotoluene,p-dichlorobenzene,p-fluorotoluene, ethylbenzene, toluene, and benzene, and the pairsp-dichlorobenzene/p-chlorotoluene and ethylbenzene/ toluene.     

Electron scattering and dissociative attachment by SF6 and its electrical-discharge by-products

Discrete electron-molecule processes relevant to SF₆ etching plasmas are examined. Absolute, total scattering cross sections for 0.2–12-eV electrons on SF₆, SO₂, SOF₂, SO₂F₂, SOF₄, and SF₄, as well as cross sections for negative-ion formation by attachment of electrons, have been measured. These are used to calculate dissociative-attachment rate coefficients as a function ofE/N for SF₆ by-products in SF₆.     

M5(PO4)3F (M=Ca, Sr, Ba)中Sm3+的电荷迁移态及Sm3+和Eu3+的电荷迁移能量关系

采用高温固相反应合成了M_5-2xSm_xNa_x(PO₄)₃F(M=Ca,Sr,Ba)荧光体,研究了其在真空紫外-可见光范围的发光特性。发现在Ca₅(PO₄)₃F中Sm³⁺的电荷迁移带约在191 nm,在Sr₅(PO₄)₃F中约在199 nm,而在Ba₅(PO₄)₃F中约在204 nm,随着被取代碱土离子半径的增大电荷迁移能量逐渐减小。比较了M₅(PO₄)₃F (M=Ca,Sr,Ba)中Sm³⁺和Eu³⁺电荷迁移能量的关系。     

The Phase Relations in the System In2O3–TiO2–MgO at 1100 and 1350°C

The phase relations in the system In₂O₃–TiO₂–MgO at 1100 and 1350°C are determined by a classical quenching method. In this system, there are four pseudobinary compounds, In₂TiO₅, MgTi₂O₅ (pseudobrookite type), MgTiO₃ (ilmenite type), and Mg₂TiO₄ (spinel type) at 1100°C. At 1350°C, in addition to these compounds there exist a spinel-type solid solution Mg_2−xIn_2xTi_1−xO₄ (0≤x≤1) and a compound In₆Ti₆MgO₂₂ with lattice constants a=5.9236(7) Å, b=3.3862(4) Å, c=6.3609(7) Å, β=108.15(1)°, and q=0.369, which is isostructural with the monoclinic In₃Ti₂FeO₁₀ in the system In₂O₃–TiO₂–MgO. The relation between the lattice constants of the spinel phase and the composition nearly satisfies Vegard's law. In₆Ti₆MgO₂₂ extends a solid solution range to In₂₀Ti₁₇Mg₃O₆₇ with lattice constants of a=5.9230(5) Å, b=3.3823(3) Å, c=6.3698(6) Å, β=108.10(5)°, and q=0.360. The distributions of constituent cations in the solid solutions are discussed in terms of their ionic radius and site preference effect.     

Potential energy curves for the X1∑ g, B1△g and B''''1∑ g states of C2 using MRCI and approximate CI methods

The potential energy curves for the X1∑ g, B1△g and B′1∑ g states of C2 have been studied by using MRCI and approximate CI methods, and are benchmarked against the calculations of full configuration interaction (FCI). The results obtained by MRCI method agree with the FCI very well, and even are accurate enough to compare other approximate methods as benchmark, when the calculations of FCI are not feasible. The approximate CI methods mentioned in this paper are reliable for treating chemical problems.     

Osmotic Coefficients of the Li<Subscript>2</Subscript>B<Subscript>4</Subscript>O<Subscript>7</Subscript>+LiCl + H<Subscript>2</Subscript>O System at <Emphasis Type="Italic">T</Emphasis>=273.15 K

Osmotic coefficients and water activities for the Li₂B₄O₇+LiCl+H₂O system have been measured at T=273.15 K by the isopiestic method, using an improved apparatus. Two types of osmotic coefficients, φ _S and φ _E, were determined. φ _S is based on the stoichiometric molalities of the solute Li₂B₄O₇(aq), and φ _E is based on equilibrium molalities from consideration of the equilibrium speciation into H₃BO₃,B(OH)₄⁻ and B₃O₃(OH)₄⁻. The stoichiometric equilibrium constants K _m for the aqueous speciation reactions were estimated. Two types of representations of the osmotic coefficients for the Li₂B₄O₇+LiCl+H₂O system are presented with ion-interaction models based on Pitzer’s equations with minor modifications: model (I) represents the φ _S data with six parameters based on considering the ion-interactions between three ionic species of Li⁺, Cl⁻, and B₄O₇²⁻, and model (II) for represents the φ _E data based on considering the equilibrium speciation. The parameters of models (I) and (II) are presented. The standard deviations for the two models are 0.0152 and 0.0298, respectively. Model (I) was more satisfactory than model (II) for representing the isopiestic data.     

Die Kristallstruktur von Dikalium-trikobalt(II)-dihydroxid-trisulfat-dihydrat,K2Co3(OH)2(SO4)3·2H2O

Crystals of K₂Co₃(OH)₂(SO₄)₃·2H₂O were synthesized under hydrothermal conditions. The crystal structure [a=17.945 (4) Å,b=7.557 (2) Å,c=9.760 (3) Å, space group Cmc2₁,Z=4] was determined by direct methods and refined with single crystal X-ray data. The H atoms were located byFourier syntheses. Their structural parameters were refined, too. The finalR-values areR=0.025 andR _w =0.028 (w=1/) for 612 reflections withF ₀>3 (F ₀). Both Co(II) atoms are octahedral six coordinated and form zigzag chains running parallel [001]. These chains are connected via sulfate groups to built up sheets parallel (100). The KO₉ polyhedron and one of the four hydrogen bonds link these sheets.

     

The magnetic structure of clinopyroxene-type LiFeGe2O6 and revised data on multiferroic LiFeSi2O6

The clinopyroxene compounds LiFeSi₂O₆ and LiFeGe₂O₆ have been investigated by constant wavelength neutron diffraction at low temperatures and by bulk magnetic measurements. Both compounds are monoclinic, space group P2₁/c and do not exhibit a change in nuclear symmetry down to 1.4 and 5 K respective. However, they transform to a magnetically ordered state below 20 K. LiFeSi₂O₆ shows a simple magnetic structure with no indication of an incommensurate modulation. The magnetic space group is P2₁/c′ and the structure is described by a ferromagnetic coupling of spins within the infinite M1 chains of edge-sharing octahedra, while the coupling between these M1 chains is antiferromagnetic. The magnetic phase transition is accompanied by magnetostriction of the lattice when passing through the magnetic phase transition. The magnetic structure of LiFeGe₂O₆ is different to the silicate: the space group is and the magnetic unit cell doubled along the a-direction. Within the M1 chains spins are coupled antiferromagnetically, while the chain to chain coupling is antiferromagnetic when coupling goes via the GeB tetrahedron and ferromagnetic when it goes via the GeA tetrahedron.     

Zur Kenntnis der wasserhaltigen schichtförmigen Alkali- und Erdalkali-Thiochromite der FormelM x (H2O) y CrS2

Two different polytypic series (2s and 3s) of layered alkali and alkaline earth thiochromites of formulaM _x(H₂O) _y CrS₂ (x=0.2–0.4;y=0.18–0.5) were prepared by topotactic ion exchange in 2H- and 3R- K _x (H₂O) _y CrS₂. The products were studied by TGA and X-ray diffraction techniques. Hydrates with monomolecular (hydrates I) and bimolecular (hydrates II) water layers between the CrS₂ slabs were observed. In the 3s series the CrS₂ layers are stacked according to 3R (Ib) (hydrates I) and 3R (Ia) (hydrates II) structures. In the 2s series the layer stacking leads to a 2H (Ib) structure and to a new orthorhombic 2 O structure.

Herrn Prof. Dr.K. Komarek zu seinem 60. Geburtstag gewidmet.     

Gas-phase reactions of SF5, SF2, and SOF with O(3 P): Their significance in plasma processing

Reactions of both SF₅ and SF₂ with O(³ P) and molecular oxygen have been studied at 295 K in a gas flow reactor sampled by a mass spectrometer. For reactions with O(³ P), rate coefficients of (2.0±0.5)×10^–11 cm³ s^–1 and (10.8±2.0)×10^–11 cm³ s^–1 were obtained for SF₅ and SF₂ respectively. The rate coefficients for reactions with O₂ are orders of magnitude lower, with an estimated upper limit of 5×10^–16 cm³ s^–1 for both SF₅ and SF₂. Reaction of SF₂ with O(³ P) leads to the production of SOF which then reacts with O(³ P) with a rate coefficient of (7.9±2.0)×10^–11 cm³ s^–1. Both SO and SO₂ are products in the reaction sequence initiated by reaction between SF₂ and O(³ P). Although considerable uncertainty exists for the heat of formation of SOF, it appears that SO arises only from reaction between SOF and O atoms which is also the source of SO₂. These results are discussed in terms of a reaction scheme proposed earlier to explain processes occurring during the plasma etching of Si in SF₆/O₂ plasmas. A comparison between the results obtained here and those reported earlier for reactions of both CF₃ and CF₂ with O and O₂ shows that there is a marked similarity in the free radical chemistry which occurs in SF₆/O₂ and CF₄/O₂ plasmas.     

Synthesis,structure, magnetism,and electrochemical properties of a linear pentanuclear Ni5 compound derived from an oligo-α-pyridylamino ligand: Ni5(μ-dmpdda)4(NCS)2

The synthesis, crystal structures, electrochemical, and magnetic properties of a linear pentanuclear Ni₅ compound derived from an oligo-α-pyridylamino ligand, [Ni₅(μ-dmpdda)₄(NCS)₂] [dmpdda-H₂ = N,N′-di(4-methylpyridin-2-yl)pyridine-2,6-diamine], are reported. Ni₅(μ-dmpdda)₄(NCS)₂ involve a Ni₅ linear chain unit with all of the Ni–Ni–Ni angles being nearly 180°, terminated by two axial ligands. The pentanuclear linear metal chain is helically wrapped by four syn–syn–syn–syn type dmpdda^2? ligands. There are two types of Ni–Ni distances in this complex. Terminal Ni–Ni distances bonded with the axial ligand are longer (2.377 Å); the inner Ni–Ni distances are short at 2.2968 Å. Terminal Ni(II) ions bonded with the axial ligands are square-pyramidal (NiN₄NCS) with long Ni–N bonds (2.092 Å), consistent with a high-spin Ni(II) configuration. The inner three Ni(II) ions have short Ni–N (1.901–1.925 Å) bond distances, consistent with a square planar (NiN₄), diamagnetic arrangement of a low-spin Ni(II) configuration. This compound exhibits magnetic behavior similar to [Ni₅(μ-tpda)₄(NCS)₂], indicating an antiferromagnetic interaction of two terminal high-spin Ni(II) ions.     

Fe（HSO4）3： An efficient,heterogeneous and reusable catalyst for the synthesis of 14-aryl- or alkyl- 14H-dibenzo[a,j]xanthenes

Fe（HSO4）3 has been used as an efficient and recyclable catalyst for the one-pot synthesis of 14-aryl- or alkyl-14Hdibenzo[aj]xanthene derivatives by the reaction of 2-naphtol and aldehydes. Different types of aromatic and aliphatic aldehydes are used in the reaction and in all cases the products were obtained in good to excellent yields.     

Thermoelectric properties of Cu-doped n-type (Bi2Te3)0.9–(Bi2−xCuxSe3)0.1(x=0–0.2) alloys

n-Type (Bi₂Te₃)_0.9–(Bi_2−xCu_xSe₃)_0.1 (x=0–0.2) alloys with Cu substitution for Bi were prepared by spark plasma-sintering technique and their structural and thermoelectric properties were evaluated. Rietveld analysis reveals that approximate 9.0% of Bi atomic sites are occupied by Cu atoms and less than 4.0 wt% second phase Cu_2.86Te₂ precipitated in the Cu-doped parent alloys. Measurements show that an introduction of a small amount of Cu (x0.1) can reduce the lattice thermal conductivity (κ_L), and improve the electrical conductivity and Seebeck coefficient. An optimal dimensionless figure of merit (ZT) value of 0.98 is obtained for x=0.1 at 417 K, which is obviously higher than those of Cu-free Bi₂Se_0.3Te_2.7 (ZT=0.66) and Ag-doped alloys (ZT=0.86) prepared by the same technologies.     

Similarities in the Intensities of Analogous Rydberg–Rydberg Transitions in the Molecular Series CF x Cl y (x=3, 2, 1; y=1, 2, 3)

In this work, the photoabsorption behaviour of the molecular series CF₃Cl, CF₂Cl₂ and CFCl₃, involving their ground state and two different Rydberg series, has been studied. The discrepancies or similarities in the intensities of homologous transitions in the three CF _x Cl _y molecules have been analysed on account of their electronic structure. Absorption oscillator strengths have been calculated with the Molecular quantum defect orbital (MQDO) approach. Electronic transitions between states belonging to two different unperturbed Rydberg series of the same molecule have been calculated by us for the first time. The quality of the achieved oscillator strengths has been assessed by comparison with, to our knowledge, scarce experimental data available in the literature, through analysis of the discrepancies or similarities in the intensities of homologous transitions in the molecular series CF _x Cl _y when states of different type are involved, and by testing the compliance of regularities by the Rydberg series object of our study.Article for the special issue dedicated to J.-P. Malrieu