NMR transversal relaxivity of aqueous suspensions of particles of Ln(3+)-based zeolite type materials

A series of zeolite-type silicates containing stoichiometric amounts of Ln(3+) ions in the framework (Ln-AV-9 materials), with composition (Na(4)K(2))(Ln(2)Si(16)O(38)).10H(2)O (Ln = Nd, Sm, Eu, Tb, Gd, Dy) has recently been synthesized and characterized. They form paramagnetic microparticles, which as aqueous suspensions have negligible water (1)H longitudinal relaxivities (r(1)) for all Ln(3+) ions studied and quite large transverse relaxivities (r(2)). In this work we further analysed the size distribution of the Ln-AV-9 particles and their r(2)* and r(2) relaxivities. The r(2)* relaxivity effects are explained by the static dephasing regime (SDR) theory. The r(2) relaxivities appear to be strongly dependent on the interval between two consecutive refocusing pulses (tau(CP)) in the train of 180 degrees pulses applied. For long tau(CP) values, the r(2) of the systems saturates at a value, which is always an order of magnitude smaller than r(2)*. These features are explained by a crude model, which takes into account the residual diffusion effect in the static dephasing regime. The large microparticles, although not efficient in T(1) relaxation, are quite effective in enhancing T(2) relaxation, particularly at high magnetic fields. The r(2)* values and the saturation values for r(2) were found to increase linearly with B(0) and mu(0)(2). The largest transversal relaxation rate enhancements were observed for Dy-AV-9 with a saturation value of r(2) of 60 s(-1) mM(-1) and a r(2)* value of 566 s(-1) mM(-1) at 9.4 T and 298 K.     

Gd(1.33)Pt(3)(Al,Si)(8) and Gd(0.67)Pt(2)(Al,Si)(5): two structures containing a disordered Gd/Al layer grown in liquid aluminum

Gd(1.33)Pt(3)Al(8) was synthesized by the combination of Gd and Pt in excess liquid aluminum. Addition of silicon resulted in the incorporation of a small amount of this element into the material to form the isostructural Gd(1.33)Pt(3)Al(7)Si. Both compounds grow as rodlike crystals with hexagonal cross section. The structures were refined in the rhombohedral space group R(-)3m, with cell parameters a = 4.3359(6) A and c = 38.702(8) A for the ternary and a = 4.3280(8) A and c = 38.62(1) A for the quaternary compound. The structure is comprised of stuffed arsenic-like PtAl(2) layers and disordered Gd/Al layers. Analysis of the hk0 zone reflections indicate the presence of an a = radical 3a supercell, but the structure is not ordered along c, as revealed by the highly diffuse reflections in the 0kl zone photos. Therefore, the compounds are disordered variants of the Gd(4)Pt(9)Al(24) type. Magnetic susceptibility studies reveal antiferromagnetic transitions at 15 K for the ternary and 7 K for the quaternary compound. Variation of the reactant ratio produces a different structure comprised of the same structural blocks, including the disordered Gd/Al layer. Gd(0.67)Pt(2)Al(5) and its quaternary analogue Gd(0.67)Pt(2)Al(4)Si form in the hexagonal system P6(3)/mmc with cell parameters a = 4.2907(3) A and c = 16.388(2) A for the ternary and a = 4.2485(6) A and c = 16.156(3) A for the quaternary compound.     

Ab initio molecular orbital study of structures and energetics of Si(3)H(2), Si(3)H(2) (+), and Si(3)H(2) (-)

The geometric structures, isomeric stabilities, and potential energy profiles of various isomers and transition states in Si(3)H(2) neutral, cation and anion are investigated at the coupled-cluster singles, doubles (triples) level of theory. For the geometrical survey, the basis sets used are of the Dunning's correlation consistent basis sets of triple-zeta quality (cc-pVTZ) for the neutral and cation and the Dunning's correlation consistent basis sets of double-zeta quality with diffuse functions (aug-cc-pVDZ) for the anion. For the final energy calculations, the aug-cc-pVTZ: Dunning's correlation consistent basis sets of triple-zeta quality with diffuse functions and cc-pVQZ: Dunning's correlation consistent basis sets of quadruple-zeta quality basis sets are used for the neutral and the aug-cc-pVTZ ones for the cation and anion. The global minimum neutral (I-1: (1)A(1)) has the same framework as that (cyclopropenylidene) of the C(3)H(2) molecule. Other low-lying three isomers (I-2, I-3, and I-4) are also predicted to be within 20 kJ/mol. Five transition states are optimized and their energy relationships with the isomers are clarified. The geometric structure of the global minimum cation (C-1: (2)A(1)) has the same framework as that of the neutral, but that of the anion (A-1: (2)A(')) differs very much from those of the neutral and cation. The calculated vertical and adiabatic ionization potentials from the global minimum neutral (I-1) are 7.85 and 7.77 eV, respectively. The adiabatic electron affinity of the neutral I-1 and the electron detachment energy of the global minimum anion (A-1) are predicted to be 1.21 and 1.92 eV, respectively. The two-electron three-centered bond is widely observed in the present Si(3)H(2) neutral, cation, and anion. The contour plots of their localized molecular orbitals clearly show the existence of such nonclassical chemical bonds.     

Theoretical investigation of water exchange on the nanometer-sized polyoxocation AlO4Al12(OH)24(H2O)12(7+) (Keggin-Al13) in aqueous solution

Reaction pathways, solvent effects and reaction parameters have been investigated for the water exchange on Keggin-Al13 in the aqueous solution by performing supermolecule density functional theory calculations. The calculated results suggest a dissociative (D) mechanism for water exchange on Keggin-Al13 in the aqueous solution and indicate that both the explicit solvent effect and bulk solvent effect have obvious influence on the energy barriers.     

Effects of Mg: Al molar ratio on the rheology of aqueous suspensions containing cationic starch and Mg/Al-hydrotalcite-like compounds

Hydrotalcite-like compounds (HTlcs) Mg₂Al-HTlc, Mg₃Al-HTlc, and Mg₄Al-HTlc were synthesized by co-precipitation method. The effects of the Mg: Al molar ratio in the Mg/Al-HTlc samples on the rheological properties of the Mg/Al-HTlc–cationic starch (CS) suspensions were investigated. The Mg: Al molar ratio in the Mg _n /Al-HTlc samples affects the structural strength and the thixotropic type of the Mg _n /Al-HTlc–CS suspensions.     

Key factor affecting the basicity of mesoporous silicas MCM-41: effect of surfactant extraction time and Si/Al ratio

Mesoporous silica Si-MCM-41 was prepared by hydrothermal method using TEOS and CTAB as the source of silica and structuring agent, respectively. The surface of the as-synthesized material was treated using HCl/ETOH solvent to remove the CTA surfactant instead of using the calcination. Characterization of the catalysts was performed using X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), nitrogen sorption at 77 K, scanning and transmission electronic microscopy (SEM, TEM), and thermogravimetric analysis TGA. The catalytic properties of the prepared materials in the condensation of acetophenone with ethyl cyanoacetate were studied. The effects of the catalyst type, Si/Al ratio, reaction kinetics, and reaction temperature were also investigated to find an optimal parameter. The results show that an interesting yield was obtained (about 96%) in a short reaction time; it is found that the yields of products depend not only on the amount of surfactant inside the mesopores but also on the Si/Al ratio. The catalyst reuse shows that this catalyst can be used up to five cycles, and at temperatures higher than 50 °C, the yield of products decreases due to the slight destruction of the catalyst as confirmed by the XRD analysis. Based on the results obtained, a possible mechanism of the condensation reaction of acetophenone was proposed.     

Synthesis and photocatalytic activity of mesoporous TiO(2) with the surface area, crystallite size, and pore size

Mesoporous TiO(2) materials with various pore-size distributions were synthesized by using diblock copolymers via a sol-gel process in aqueous solution. The properties of these materials were characterized by FE-SEM, HR-TEM, XRD, DRS, BET, and BJH analysis. All particles have spherical morphology with a diameter range of 1-3 mum. The mesoporous TiO(2) materials calcined at 400 degrees C were found to have different specific surface areas - 186, 210, and 192 m(2) g(-1) - and average pore sizes depending on the type of diblock copolymer-5.1, 6.1, and 6.4 nm-and their crystallite sizes were found to be 8.1, 8.3, and 8.8 nm. The photocatalytic activity of each sample was investigated by measuring the photodecomposition of methylene blue (MB), and the small crystallite size, large surface area, and small pore size were found to exhibit better photocatalytic activities. In addition, the photocatalytic activities of all the mesoporous TiO(2) materials were found to be better than that of commercial TiO(2).     

Adsorption reactions of dimethylaluminum isopropoxide and water on the H/Si(100)-2 x 1 surface: initial reactions for atomic layer deposition of Al2O3

The surface reaction pathways of dimethylaluminum isopropoxide (DMAI) and water with the H/Si(100)-2 x 1 surface were theoretically investigated with SIMOMM:MP2/6-31G(d). The oxygen atom in DMAI stabilizes an initial complex, facilitating the approach of DMAI to the surface. The methane loss reaction, propane loss reaction, methylation, hydrogen loss reaction, and ring closing reaction channels of the DMAI-surface reactions were identified. Among these, the methane loss reaction depositing -Al(CH3)OCH(CH3)2 was found to be the major channel due to low barrier height and large exothermicity. The ring closing reaction is kinetically the second most accessible channel, even though it is not thermodynamically favorable. On the basis of these theoretical results, recent experimental data were reinterpreted such that the experimentally observed peaks of CH4 and CH(CH3)2OH are in fact the products of these two channels. The propane loss reaction is kinetically the third most probable channel. It produces the surface Si-O bond, which is a reaction unique to DMAI as compared to trimethylaluminum. In summary, the oxygen substitution not only affects the basic nature of the existing potential energy surfaces but also opens new possibilities.     

The influence of the Si(OC2H5)4/(CH3O)3Si(CH2)3SH ratio on the structure-adsorption characteristics of xerogels formed and accessibility of functional groups in their surface layers

It was shown for the example of the Si(OC₂H₅)₄/(CH₃O)₃Si(CH₂)₃SH system that successively increasing the fraction of tetraethoxysilane in it (from 1: 1 to 5: 1 (mol)) successively decreased the content of 3-mercaptopropyl groups in xerogels synthesized by the sol-gel method (in the presence of methanol as a solvent and fluorine ions as a catalyst) from 5.0 to 1.9 mmol/g, whereas the specific surface area of such xerogels simultaneously increased from 13 to 631 m²/g. The sorption volume of pores also increased, their mean diameter varying insignificantly. The mean diameter of pores (2.2–2.5 nm) was close to the boundary between meso-and micropores, which was in agreement with the form of nitrogen adsorption isotherms (type I according to the IUPAC classification). It was shown by scanning electron microscopy that virtually nonporous xerogels formed at a 1: 1 ratio between alkoxysilanes consisted of spherical partially united particles 2.5–3 μm in diameter. All the 3-mercaptopropyl groups of this and other samples were, however, accessible to silver(I) ions. It follows that these groups are situated in the surface layer of xerogels. The number of thiol groups per 1 nm² of the surface of nonporous xerogels was 1.7–7.0 groups/nm² and depended on the ratio between reacting alkoxysilanes and s _sp.     

Gd_(3(1-x))Al_5O_(12)∶RE_(3X)分立材料芯片制备及发光性能研究

将组合材料芯片技术中四元组合法应用于新型发光材料Gd3(1-x)Al5O12∶RE3X的RE激活剂和敏化剂种类优选.由Gd3Al5O12基体材料芯片获得如下的研究结果:1)在紫外激发下(254 nm)Gd3(1-x)Al5O3∶Eu3x材料具有红色荧光性能;2)Pr(n(Pr)∶n(Eu)<1∶10)、Ce(n(Ce)∶n(Eu)<1∶10)共掺杂时会降低发光强度.光谱分析表明:Pr、Ce能级嵌入,使得激活剂和敏化剂发生共振能量传递,是Gd3Al5O12∶Eu(简称为GAG∶Eu)发光效率降低的主要原因.筛选结果得到柠檬酸盐硝酸盐溶胶凝胶法制备粉体筛选实验结果验证.实验结果表明组合法在发光材料开发上具有高效性.     

Improved kinetics of LiNi(1/3)Mn(1/3)Co(1/3)O2 cathode material through reduced graphene oxide networks

An electronically conducting 3D network of reduced graphene oxide (RGO) was introduced into LiNi(1/3)Mn(1/3)Co(1/3)O(2) (LNMC) cathode material in a special nano/micro hierarchical structure. The rate test and cycling measurement showed that the hierarchical networks remarkably improve the high rate performance of LNMC electrode for lithium-ion batteries. The effect of RGO conducting networks on kinetic property was investigated by electrochemical impedance spectroscopy (EIS) and potentiostatic intermittent titration (PITT). The EIS results reveal that the RGO network greatly decreases the resistance of lithium batteries, especially the charge transfer resistance which can be attributed to the significantly improved conducting networks. The enhancement of apparent diffusion coefficient by the RGO conducting networks is shown by PITT. The power performance was found to be limited by the electrical conduction in the two-phase region, which can be greatly facilitated by the hierarchical RGO network together with carbon black. The as-obtained LNMC/RGO cathode exhibits an outstanding electrochemical property supporting the design idea of electronically conducting 3D networks for the high-energy and high-power lithium-ion batteries.     

Al(HSO4)3 and Al2O3-SO3H as Efficient Catalysts for Modified Preparation of 3,4-Dihydropyrimidin-2 (1H)-ones/thiones

An environmentally friendly procedure for the preparation of dihydropyrimidinone derivatives or their sulfur analogues under thermal solvent-free conditions in the presence of aluminium hydrogen sulfate [Al(HSO₄)₃] and alumina sulfuric acid (Al₂O₃-SO₃H) as heterogeneous catalysts was developed.     

稀土Gd5Ge2(Si2-xAlx)合金系的晶体结构和磁卡效应研究

用磁控电弧炉在氩气气氛下熔炼了Gd5Ge2(Si2-xAlx) (x=0, 0.1, 0.2, 0.5, 1.0)系样品.X射线粉末衍射分析表明, 样品基本为单相结构, 其晶体对称性不会随Al含量的增加而改变.用振动样品磁强计测量了样品的M-T曲线和不同温度下的M-H曲线.居里温度随Al含量x的增加略有减小, 当 x=0.2时Gd5Ge2(Si2-xAlx)有最大-ΔSM值.退火对样品的居里温度和磁卡效应影响不大, 退火前后的居里温度和磁卡效应基本保持一致.     

Efficient one-pot synthesis of 2,3-dihydroquinazoline-4(1H)-ones promoted by FeCl3/neutral Al2O3

Research on Chemical Intermediates - 2,3-Dihydroquinazolin-4(1H)-one derivatives have been synthesized via one-pot reaction of isatoic anhydride, aromatic aldehyde, and ammonium acetate catalyzed...     

Cubic aluminum silicides RE8Ru12Al49Si9(Al(x)Si12-x) (RE = Pr, Sm) from liquid aluminum. Empty (Si,Al)12 cuboctahedral clusters and assignment of the Al/Si distribution with neutron diffraction.

Two new quaternary aluminum silicides, RE8Ru12Al49Si9(Al(x)Si12-x) (x approximately 4; RE = Pr, Sm), have been synthesized from Sm (or Sm2O3), Pr, Ru, and Si in molten aluminum between 800 and 1000 degrees C in sealed fused silica tubes. Both compounds form black shiny crystals that are stable in air and NaOH. The Nd analog is also stable. The compounds crystallize in a new structural type. The structure, determined by single-crystal X-ray diffraction, is cubic, space group Pm3m with Z = 1, and has lattice parameters of a = 11.510(1) A for Sm8Ru12Al49Si9(Al(x)Si12-x) and a = 11.553(2) A for Pr8Ru12Al49Si9(Al(x)Si12-x) (x approximately 4). The structure consists of octahedral units of AlSi6, at the cell center, Si2Ru4Al8 clusters, at each face center, SiAl8 cubes, at the middle of the cell edges, and unique (Al,Si)12 cuboctohedral clusters, at the cell corners. These different structural units are connected to each other either by shared atoms, Al-Al bonds, or Al-Ru bonds. The rare earth metal atoms fill the space between various structural units. The Al/Si distribution was verified by single-crystal neutron diffraction studies conducted on Pr8Ru12Al49Si9(Al(x)Si12-x). Sm8Ru12Al49Si9(Al(x)Si12-x) and Pr8Ru12Al49Si9(Al(x)Si12-x) show ferromagnetic ordering at Tc approximately 10 and approximately 20 K, respectively. A charge of 3+ can be assigned to the rare earth atoms while the Ru atoms are diamagnetic.     

[Gd(Gly)3(H2O)2]Cl3·H2O的合成与晶体结构

氯化钆;甘氨酸;固态配合物;[Gd(Gly)3(H2O)2]Cl3·H2O的合成与晶体结构