脂溶性CdSe/ZnS量子点脂质体复合物的制备及表征

在油相中成功合成了脂溶性CdSe/ZnS核壳量子点纳米粒,粒径平均为4.5 nm,量子产率达29%,发射波长为540 nm。通过薄膜分散法,以蛋黄卵磷脂、胆固醇为膜材,将脂溶性的CdSe/ZnS核壳量子点包覆于脂质体磷脂双分子层中,由于磷脂分子的两亲性,使得脂溶性的CdSe/ZnS核壳量子点同时又具有亲水性。通过透射电镜对脂质体形态进行了表征,倒置荧光显微镜证实了发光CdSe/ZnS核壳量子点成功包埋于脂质体双分子层中,包裹的发光CdSe/ZnS核壳量子点具有更稳定的发光及抗光漂白性质。     

ZnO作为电子传输层的绿光胶体CdSe量子点LED(QD-LED)的制备与表征

通过调节作为发光层的量子点的尺寸,可以制作出覆盖可见光(380～780 nm)以及近红外光谱的量子点LED(QD-LED),其光谱范围很窄且半高宽可达30 nm。然而量子点LED的寿命、亮度以及效率需要进一步提高才能满足商业化的需求。为了研究QD-LED器件的特性,本文采用523 nm波长的CdSe/ZnS核壳型量子点为发光层、poly-TPD为空穴传输层、ZnO为电子传输层,制备了绿光量子点LED,并表征了器件的特性。     

壳层相关的CdSe核/壳量子点发光的热稳定性

测量了CdSe/ZnS(3 ML)核/壳结构及CdSe/CdS(3 ML)/ZnCdS(1 ML)/ZnS(2 ML)核/多壳层结构量子点在80~460 K范围内的光致发光光谱,研究了壳层结构对CdSe量子点发光热稳定性的影响。详细地分析了CdSe量子点的发光峰位能量、线宽和积分强度与温度之间的关系,发现CdSe量子点的发光热稳定性依赖于壳层结构。CdS/ZnCdS/ZnS多壳层结构包覆CdSe量子点在低温和高温部分的热激活能均大于ZnS壳层包覆的CdSe量子点,具有更好的发光热稳定性。此外,在300-460-300 K加热-冷却循环实验中,CdS/ZnCdS/ZnS多壳层结构包覆CdSe量子点的发光强度永久性损失更少,热抵御能力更强。     

核壳型ZnS∶Cu/ZnS量子点的制备及发光性质

本文采用水相合成方法制备了ZnS∶Cu量子点并进行了ZnS壳层修饰,研究了壳层厚度对ZnS∶Cu量子点光学性质的影响,采用TEM、XRD、PL、PLE和UV-Vis等测试方法对其进行了表征。实验结果表明,合成的ZnS∶Cu/ZnS量子点为立方闪锌矿,尺寸分布均匀呈球形,分散性良好,经过壳层修饰平均粒径由2 nm增加到3.2 nm。随着ZnS壳与ZnS核量的比的增加,量子点的PLE激发峰位置和UV-Vis吸收谱线出现红移,也说明了量子点的尺寸增大,证明ZnS在ZnS∶Cu量子点的表面生长,形成了核壳结构的ZnS∶Cu/ZnS量子点。随着壳层增厚,量子点与铜离子发光中心相关的发射峰强度先增大后减小,当壳核比n_s/n_c=2.5时,发光强度达到最大。     

核壳结构硒化镉/硫化镉/巯基乙酸量子点载流子输运特性

采用水溶液法合成了巯基乙酸(TGA) 包覆的CdSe 量子点. 通过X 射线粉末衍射和高分辨透射显微镜检测结果证实, 合成得到闪锌矿结构CdSe 量子点. 能谱图和傅里叶变换红外光谱图结果说明, 在核CdSe 纳米粒子表面与配体TGA 之间有CdS 壳层结构形成. 利用样品表面光电压(SPV) 谱, 指认CdSe 量子点精细能带结构以及各自对应的激发态特征: 475 nm (2.61 eV) 和400 nm (3.1 eV) 两个波长处的SPV 响应峰分别与CdSe 核和CdS 壳层带-带隙跃迁相对应; 370 nm (3.35 eV) 附近SPV 响应峰可能与TGA 中羰基与巯基或羧基之间发生的n →π^* 跃迁有关. 场诱导表面光电压谱结果证实, 合成的CdSe 量子点具有明显的N 型表面光伏特性, 而上述n→π^* 跃迁则具有P 型表面光伏特性. 荧光光谱谱线均匀增宽以及SPV 响应峰位蓝移, 说明样品具有明显的量子尺寸效应. 结合不同pH 值下合成的CdSe 量子点的SPV 谱和表面光声谱发现, SPV 响应强度与表面光声光谱信号强度变化趋势恰好相反. 上述样品表面光伏效应表明, CdSe 量子点表面和相界面处的精细电子结构以及光生载流子的输运特性均与量子点的尺寸大小存在某种内在联系. 关键词： 硒化镉量子点 光生载流子 表面光电压谱 表面光声光谱     

ZnS薄膜参数对有机/无机复合发光器件特性的影响

半导体量子点(QDs)具有发光效率高和发光波长可调等特点。采用胶体CdSe QDs作电致发光器件的有源材料,TPD(N,N′-biphenyl-N,N′-bis-(3-methylphenyl)-1,1′-biphenyl-4,4′-diamine)作空穴传输层,ZnS作电子传输层,研究了有机/无机复合发光器件ITO/TPD/CdSe QDs/ZnS/Ag的电致发光特性。TPD和CdSe QDs薄膜采用旋涂方法、ZnS薄膜采用磁控溅射方法沉积,器件表面平整。CdSe QDs的光致发光和电致发光谱峰位波长均位于～580 nm,属于量子点的带边激子发光。我们与以前的ITO/ZnS/CdSe QDs/ZnS/Ag发光器件结构进行了对比,发现新的器件结构的电致发光谱没有观察到QDs表面态的发光,而且新器件的发光强度是ITO/ZnS/CdSe QDs/ZnS/Ag结构的～10倍。发光效率的提高归因于碰撞激发与载流子注入两种发光机制并存的结果：一方面电子经过ZnS 层加速后,碰撞激发CdSe QDs发光;另一方面,空穴从TPD层注入CdSe QDs 与QDs中激发的电子复合发光。我们进一步研究了ZnS电子加速层厚度对发光特性的影响,选择ZnS薄膜的厚度分别是80,120 和160 nm,发现随着ZnS层厚度增大,器件启亮电压升高,EL强度增大,但是击穿电压降低。EL峰位随着ZnS厚度的减小发生明显蓝移,对上述实验现象进行了机理解释。     

ZnS/CdS/ZnS量子点量子阱的荧光衰减

采用反胶束方法制备了ZnS/CdS/ZnS量子点量子阱，并对其光谱性质进行了研究。结果表明所制得的量子点量子阱尺寸分布均匀，平均粒径为4.5nm，发光峰位于515nm左右，归属于CdS体内的施主－受主对复合。ZnS/CdS/ZnS量子点量子阱中CdS的发光比核－壳结构的ZnS/CdS量子点增强了近四倍，荧光寿命也有所增长。     

CdSe/CdS/ZnS量子点光纤的增益研究

采用油相法合成了CdSe/CdS/ZnS量子点,相对于CdSe量子点,其吸收光谱、发射光谱均发生了红移。利用COMSOL Multiphysics软件模拟CdSe/CdS/ZnS量子点光纤和甲苯光纤的电场分布,结果表明CdSe/CdS/ZnS量子点光纤的电场强度高于甲苯光纤。采用中心波长为532 nm的稳态半导体激光器作为光源,对甲苯光纤、CdSe/ZnS量子点光纤、CdSe/CdS/ZnS量子点光纤进行电压信号测试,发现CdSe/ZnS量子点光纤和CdSe/CdS/ZnS量子点光纤的电压信号值相对于甲苯光纤电压信号值分别增强了6.28 mV和18.43 mV,表明双壳型量子点光纤的增益高于单壳型量子点。     

CdSe/ZnSe/ZnS多壳层结构量子点的制备与表征

展示了一种简捷的多壳层量子点合成路线。在含有过量Se源的CdSe体系中直接注入Zn源,"一步法"合成了CdSe/ZnSe量子点;进一步以CdSe/ZnSe为"核",表面外延生长ZnS壳层制备了核/壳/壳结构CdSe/ZnSe/ZnS量子点。相对于以往报道的多壳层结构量子点的制备方法,该方法通过减少壳层的生长步骤有效地简化了实验操作,缩短了实验周期,同时减少对原料的损耗。对量子点进行高温退火处理,能够大幅提高CdSe/ZnSe/ZnS量子点的发光量子产率。透射电镜、XRD以及光谱研究表明:所制备的量子点接近球形,核与壳层纳米晶均为闪锌矿结构,最终获得的CdSe/ZnSe/ZnS量子点的光致发光量子产率达到53％。为了实现量子点的表面生物功能化,通过巯基酸进行了表面配体交换修饰,使量子点表面具有水溶性的羧基功能团,并且能够维持较高的光致发光量子产率。     

基于CuInS2/ZnS核壳结构量子点的高光效暖白光LED

采用逐步热注射法合成了用于白光LED的CuInS₂/ZnS(CIS/ZnS)核壳结构量子点.通过调整Cu/In的比率, 在CuInS₂(CIS)量子点的基础上, 合成了发射波长在570~650 nm之间可调的CIS/ZnS量子点.与CIS量子点的低量子产率相比, 具有核壳结构的CIS/ZnS量子点的量子产率达到了78%.通过在黄光荧光粉YAG :Ce³⁺表面旋涂CIS/ZnS量子点的方式制备了暖白光LED器件.在工作电流为10 mA时, 暖白光LED的发光效率达到了244.58 lm/W.由于CIS/ZnS量子点的加入, 所制备的白光LED器件的显色指数达到86.7且发光颜色向暖色调发生了转移, 相应的色坐标为(0.340 6, 0.369 0).     

Experimental investigation of energy transfer between CdSe/ZnS quantum dots and different-sized gold nanoparticles

Hybrid nanostructures of quantum dots(QDs) and metallic nanostructure are attractive for future use in a variety of optoelectronic devices. For photodetection applications, it is important that the photoluminescence (PL) of QDs is quenched by the metallic nanostructures. Here, the quenching efficiency of CdSe/ZnS core-shell quantum dots (QDs) with different sized gold nanoparticles (NPs) films through energy transfer is investigated by measuring the PL intensity of the hybrid nanostructures. In our research, the gold NPs films are formed by the post-annealing of the deposited Au films on the quartz substrate. We find that the energy transfer from the QDs to the Au NPs strongly depends on the sizes of the Au NPs. For CdSe/ZnS QDs direct contact with the Au NPs films, the largest energy transfer efficiency are detected when the resonance absorption peak of the Au NPs is nearest to the emission peak of the CdSe/ZnS QDs. However, when there is a PMMA spacer between the QDs layer and the Au NPs films, firstly, we find that the energy transfer efficiency is weakened, and the largest energy transfer efficiency is obtained when the resonant absorption peak of the Au NPs is farthest to the emission peak wavelength of CdSe/ZnS QDs. These results will be useful for the potential design of the high efficiency QDs optoelectronic devices.     

Re-charging the luminescence states in CdSe/ZnS quantum dots at the conjugation to Osteopontin antibodies

The paper presents the original study of photoluminescence (PL) and Raman scattering spectra of core–shell CdSe/ZnS quantum dots (QDs) covered by the amine-derivatized polyethylene glycol (PEG) with luminescence interface states. First commercially available CdSe/ZnS QDs with emission at 640 nm (1.94 eV) covered by PEG polymer have been studied in nonconjugated states. PL spectra of nonconjugated QDs are characterized by a superposition of PL bands related to exciton emission in a CdSe core and to the hot electron–hole recombination via high energy luminescence states. The study of high energy PL bands in QDs at different temperatures has shown that these PL bands are related to luminescence interface states at the CdSe/ZnS or ZnS/polymer interface. Then CdSe/ZnS QDs have been conjugated with biomolecules—the Osteopontin antibodies. It is revealed that the PL spectrum of bioconjugated QDs changed essentially with decreasing hot electron–hole recombination flow via luminescence interface states. It is shown that the QD bioconjugation process to Osteopontin antibodies is complex and includes the covalent and electrostatic interactions between them. The variation of PL spectra due to the bioconjugation is explained on the basis of electrostatic interaction between the QDs and biomolecule dipoles that stimulates re-charging QD interface states. The study of Raman scattering of bioconjugated CdSe/ZnS QDs has confirmed that the antibody molecules have the electric dipoles. It is shown that CdSe/ZnS QDs with luminescence interface states are promising for the study of bioconjugation effects with specific antibodies and can be a powerful technique in biology and medicine.     

Specific features of luminescence quenching in a nematic liquid crystal doped with nanoparticles

The change in the intensity of the photoluminescence (PL) spectra of nematic liquid crystal (NLC) composites as a function of the concentration of CdSe/ZnS semiconductor quantum dots (QDs) and TiO₂ and ZrO₂ nanoparticles ~5 nm in diameter has been investigated. It is shown that the PL-quenching intensity in composites with CdSe/ZnS QDs exceeds that in composites with TiO₂ and ZrO₂ nanoparticles. The lowfrequency spectra of these composites with a concentration of 0.1 wt %, recorded in the range of 10²–10³ Hz, and the content of mobile ions in them have been investigated. It is found that the dielectric loss in the composite with CdSe/ZnS QDs is much higher and the content of mobile ions is larger by a factor of 3 than in the composites with TiO₂ and ZrO₂ nanoparticles. It is shown that an increase in the CdSe/ZnS QD concentration in NLC composites leads to an increase in the dielectric loss and a decrease in the PL intensity. Possible mechanisms of the interaction between NLC molecules and CdSe/ZnS QDs are discussed.     

2018年2期电子期刊

光诱导功能退化是胶体量子点在应用中面临的主要挑战之一,本文针对这一问题研究了使用磁控溅射沉积SiO₂薄膜形成钝化层来提高CdSe/ZnS量子点发光稳定性的方法。首先,通过三正辛基膦辅助连续离子层吸附反应方法合成了615 nm发光的红色CdSe/ZnS量子点。然后将量子点旋涂在SiO₂/Si基片上,再通过磁控溅射方法在量子点上沉积了厚度为20 nm的SiO₂薄膜作为钝化层。使用连续波激光光源分别在空气气氛和真空条件下照射样品,研究了经过不同照射时间后钝化和未钝化量子点的稳态光致发光光谱。结果表明,随着照射时间的延长,没有SiO₂钝化的量子点的PL强度显著降低、PL峰值发生蓝移、FWHM不断增大。对比研究发现,由于SiO₂薄膜能够阻挡空气中的水和氧,减缓了量子点表面的光诱导氧化现象,因此显著提高了CdSe/ZnS量子点的稳定性。     

Study of the Optical Properties of CdZnSe/ZnS-Quantum Dot–Au-Nanoparticle Complexes

The interaction of gold nanoparticles (NPs) and semiconductor alloyed CdZnSe/ZnS quantum dots (QDs) in colloidal solutions is studied. It is shown that the photoluminescence intensity of QDs in a mixture decreases compared to that in the initial QD solution, which is caused by resonance nonradiative energy transfer from QDs to Au NPs in spontaneously formed aggregates. To control the formation of pairs of interacting QDs and Au NPs, we proposed have a method for creating QD–Au NP complexes bound by special molecules—ligands. It is shown that the morphology and optical properties of the samples obtained depend on the method of their preparation, in particular, on the chemical environment of QDs. It is found that the complexes form in the case of addition of hydrophilic Au NPs to hydrophobic QDs and that this almost does not change the optical properties of the latter compared to those of quasi-isolated QDs in colloidal solution.     

Au纳米颗粒和CdTe量子点复合体系发光增强和猝灭效应

利用金属蒸发真空多弧离子源注入机, 将Au离子注入到高纯石英玻璃来制备镶嵌有Au 纳米颗粒的衬底材料, 随后将化学方法合成的CdTe量子点旋涂在玻璃衬底上制备了Au纳米颗粒和CdTe量子点复合体系. 通过对镶嵌有Au纳米颗粒的衬底进行热退火处理来控制Au纳米颗粒的生长和分布, 系统研究了Au纳米颗粒的局域表面等离子体共振对CdTe量子点光致发光性能的影响. 利用光学吸收谱、原子力显微镜、透射电子显微镜和光致发光谱对样品进行了表征和测试. 光致发光谱表明, Au纳米颗粒的局域表面等离子体对CdTe量子点的发光有增强效应也有猝灭效应. 深入分析了Au纳米颗粒和CdTe量子点之间的相互作用过程, 提出了关于Au-CdTe 纳米复合体系中CdTe 发光增强和猝灭的新机理. 该实验结果为利用金属纳米颗粒表面等离子体技术制备高发光性能的光电子器件提供了较好的参考.     

Direct and stepwise energy transfer from excitons to plasmons in close-packed metal and semiconductor nanoparticle monolayer films

We studied the dynamics of photoluminescence (PL) and energy transfer in close-packed monolayer films of CdSe and Au nanoparticles (NPs) assembled using the Langmuir-Blodgett technique. The PL intensity and dynamics depended on the ratio of CdSe to Au NPs in the mixed films. The PL quenching of CdSe NPs occurs through rapid energy transfer from excitons in CdSe NPs to plasmons in Au NPs. The PL decay curves of the mixed NPs monolayers are determined by three decay rates: the direct energy transfer between the nearest-neighbor CdSe and Au NPs (CdSe-->Au), the stepwise energy transfer from CdSe to CdSe to Au NPs (CdSe-->CdSe-->Au), and the radiative recombination in CdSe NPs.     

Determination of Thermal History by Photoluminescence of Core‐Shelled Quantum Dots Going Through Heating Events

A kind of novel thermal history nanosensors are theoretically designed and experimentally demonstrated to permanently record thermal events. The photoluminescence (PL) spectrum of core‐shelled quantum dots (QDs) CdSe/ZnS irreversibly shifts with heating histories (temperature and duration) of thermal events. The induced PL shift of the QDs CdSe/ZnS is employed to permanently record thermal histories. We further model a kind of thermal history nanosensor based on the thermal‐induced phenomena of core‐shelled QDs to permanently record thermal histories at microscale and demonstrate to reconstruct temperature and duration of heating events simultaneously from PL spectra of the QDs. The physical mechanism of the sensors is discussed.     

Anti-Reflection Characteristics of Si Nanowires for Enhanced Photoluminescence from CdTe/CdS Quantum Dots

CdTe/CdS quantum dots(QDs) are fabricated on Si nanowires(NWs) substrates with and without Au nanoparticles(NPs). The formation of Au NPs on Si NWs can be certified as shown in scanning electron microscopy images. The optical properties of samples are also investigated. It is interesting to find that the photoluminescence(PL) intensity of Cd Te/Cd S QD films on Si nanowire substrates with Au NPs is significantly increased,which can reach 8-fold higher than that of samples on planar Si without Au NPs. The results of finite-difference time-domain simulation indicate that Au NPs induce stronger localization of electric field and then boost the PL intensity of QDs nearby. Furthermore, the time-resolved luminescence decay curve shows the PL lifetime, which is about 5.5 ns at the emission peaks of QD films on planar, increasing from 1.8 ns of QD films on Si NWs to4.7 ns after introducing Au NPs into Si NWs.     

Shell-dependent hole transport in highly luminescent CdSe-core CdS/ZnCdS/ZnS multi-shell nanocrystals

The photoinduced hole transfer dynamics from CdSe quantum dots (QDs), shelled with ZnS or CdS/CdZnS/ZnS layers, to organic hole transporting materials (HTMs) is investigated by absorption, steady-state and time-resolved photoluminescence (PL) spectroscopy. The PL intensity and lifetime of the QDs are dramatically quenched when HTMs are added into the dilute QD solution. The quenching efficiency of the QDs significantly decreases with increasing the shell thickness and increases with decreasing the oxidation potential of the HTMs. These facts are correlated with the photoinduced hole transfer from the QDs to the HTMs. The above results are helpful in understanding the photoexcitation dynamics-related phenomena of organic molecule conjugated nano-object.