现场显微红外光谱电化学技术及超微铂盘电极的反射吸收光谱测定

本文阐述了一种新的光谱电化学技术－现场显微红外光谱电化学法的反射式方法的技术特点和优势，报告了一种适于水溶剂和非水溶剂的反射式现场显微红外光谱电化学池的设计，并首次在２５ｕｍ直径的超微铂盘工作电极上，对Ｆｅ（ＣＮ）＾４－６／ＦＥ（ＣＮ）＾３－６进行了现场显微红外光谱电化学的测量。     

现场压电红外反射光谱电化学研究邻联甲苯胺的电化学行为

利用现场压电红外发射光谱电化学技术研究邻联甲苯胺(OTD)在金电极上的电化学行为.压电电化学结果表明:电位范围对OTD氧化的影响很大.当电位扫至0.6 V时,氧化过程中中间体的生成和溶解的同时,部分未溶中间体在电极表面沉积.当电位大于0.65 V时,还有OTD的电化学氧化聚合.压电红外反射光谱电化学结果表明中间体是OTD第一氧化产物之间相互作用形成的.进一步考察了肝素大阴离子对OTD的氧化的影响.     

铂电极上苯和苯磺酸吸附定向的现场红外反射吸收光谱电化学方法研究

本文用现场红外反射吸收光谱电化学方法和循环伏安法研究铂电极上苯和苯磺酸的吸附定向.对于苯/铂势系,电势在-0.6至0.0 V(相对饱和甘汞电极)内,苯主要以垂直方式吸附;在0.0至0.8 V内则主要以平躺方式吸附.对于苯磺酸/铂体系,电势在-0.4至0.0 V内,苯磺酸分子中的苯环主要呈垂直吸附且SO_3H基团远离电极表面;在0.0至1.0 V内则主要以倾斜平躺方式吸附,SO_3H基团通过其中的两个氧原子吸附于电极表面上.     

铂电极上苯和苯磺酸吸附定向的现场红外反射吸收光谱电化学方法研究

本文用现场红外反射吸收光谱电化学方法和循环伏安法研究铂电析上苯和苯磺酸的吸附定向。对于苯/铂势系, 电势在-0.6至0.0V(相对饱和甘汞电极)内, 苯主要以垂直方式吸附; 在0.0至0.8V内则主要以平躺方式吸附。对于苯磺酸/铂体系,电势在-0.4V至0.0V内, 苯磺酸分子中的苯环主要呈垂直吸附且SO~3H基团远离电极表面; 在0.0至1.0V内则主要以倾斜平躺方式吸附, SO~3H基团通过其中的两个氧原子吸附于电极表面上。     

外反射式微薄层现场显微红外光谱电化学池设计

本报道一种能很好适用于固态分析了现场研究的外反射式微盘电极薄层显微红外光谱电化学池设计。该池使用１００μｍ直径微铂盘工作电极，银盘参比电极和同心环形辅助电极。在ＰＥＧ４００／ＬｉＣＬＯ４体系中，池参数为：薄层厚０．６μｍ，表观薄层电阻１４ｍΩ，充电电容４×１０＾３ｐＦ，时间常数６０ｍｓ，并测得常温下Ｆｅ（ＣＮ）６＾３－／４－的表观扩散系数４×１０＾－７ｃｍ＾２／ｓ，获了良好分辨Ｆｅ（ＣＮ）６＾３     

基于超微电极的原位电化学拉曼光谱

原位电化学拉曼光谱是一种重要的光谱电化学技术.基于超微电极的原位电化学拉曼光谱将拉曼光谱反映的结构信息与电极表面的电化学过程从实验上严格对应和关联,为深刻理解电化学反应机理提供依据.本文综述了采用超微电极作为工作电极的原位电化学拉曼光谱的研究方法和应用进展,总结了应用超微电极作为工作电极开展电化学拉曼光谱实验的方法和具有表面增强拉曼活性的超微电极制备方法,展示了如何利用在超微电极表面获得的拉曼光谱与界面电化学过程的严格关联研究单个锌颗粒电化学氧化过程、吡啶分子在Au电极表面的电化学吸附过程,以及如何利用该技术能以高的信噪比和灵敏度同时测量光电流与分子反应这一特性研究对巯基苯胺选择性光氧化反应.采用超微电极作为工作电极的原位电化学拉曼光谱技术极大拓展了拉曼光谱技术的研究范围,有望成为探索(光)电化学反应的有力工具.     

电化学原位扫描显微红外反射光谱及其对铂表面CO吸附的红外成象

利用Fourier变换红外光谱仪 ,红外显微镜和X Y扫描平台 ,通过设计和研制原位红外显微池和计算机接口及控制软件 ,建立了电化学原位扫描显微红外反射光谱 .研究工作显示 ,这一新的空间分辨原位红外反射光谱技术不仅可以获得固 /液界面环境中表面微区振动光谱的信息 ,还可以用于电极表面红外成象 .获得的CO在Pt多晶电极表面吸附性能的化学图象在 10 -2 cm尺度上给出电极表面微区反应性能的不均一性及其分布 .     

Pt电极表面及附近水行为的现场红外反射吸收光谱电化学初探

本文用现场红外反射吸收光谱电化学方法和循环伏安法研究了Pt电极表面及附近水的行为. 据不同范围内得到的SNIFTIRS 谱中水峰的变化提出了三种可能的解释: (A)电极上水的吸附取向的改变; (B)电极附近水分子的长程有序的变化; (C)电极上水的氧化及还原, Pt-O化合物的形成导致薄层中水量的减少。     

铜电极上CN-、SCN-电化学行为的现场红外反射吸收光谱研究

本文用循环伏安法和现场红外光谱方法研究了铜电极上CN~-和SCN~-的电化学行为。对于0.5mol~(-1)L~(-1)NaCN+0.5 mol L~(-1)NaF/Cu体系, 电极电势在-1.60至0.30 V(相对SCE)范围内, 2030—2230 cm~(-1)范围内可得到三个吸收峰, 位置分别为2076, 2094和2170 cm~(-1)。2076和2170 cm~(-1)峰分别对应于溶液中CN~-和表面沉积难溶化合物CuCN。2094 cm~(-1)峰是吸附态CN~-和溶液中配合物Cu(CN)_3~2二物种的红外吸收叠加。对于0.5 molL~(-1)NaSCN+0.5 molL~(-1)NaF/Cu体系, 在上述电势范围内可得到2060, 2177和2170 cm~(-1)三个红外吸收峰, 分别对应于溶液中的SCN~-, 吸附态的SCN~-和表面难溶化合物CuNCS。     

利用毛细管效应的反射式显微红外光谱电化学池的设计与表征

报道一种新型的适用于水和非水溶剂的反射式现场显微红外光谱电化学池。该池利用毛细管效应来克服显微池中溶剂挥发和除氧的困难，保证电解薄层能长时间保持浸润和良好的工作状态。安装了５０μｍ直径的铂微盘工作电极，分别在水溶液和二氯甲烷溶液中，用Ｆｅ（ＣＮ）６＾４－／３－和二茂铁体系进行了表征。     

In-situ Microscopic FT-IR Spectroelectrochemical Investigation of Polythiophene Film Modified Electrode

ＩｎｔｒｏｄｕｃｔｉｏｎＰｏｌｙｔｈｉｏｐｈｅｎｅｉｓａｃｏｎｄｕｃｔｉｖｅｐｏｌｙｍｅｒｗｉｔｈｓｔａｂｌｅ ｐｒｏｐｅｒｔｉｅｓａｎｄｖａｒｉｏｕｓｓｔｒｕｃｔｕｒｅｓ ,ｗｈｉｃｈｉｓｉｎｐｒｏｓｐｅｃｔｏｆｂｅｉｎｇｕｓｅｄｉｎｍａｎｙｆｉｅｌｄｓｓｕｃｈａｓｅｌｅｃｔｒｏｄｅｍａｔｅｒｉａｌｓ ,ｏｒｇａｎｉｃｓｅｍｉｃｏｎ ｄｕｃｔｏｒｓ ,ｃｏｒｒｏｓｉｏｎｉｎｈｉｂｉｔｏｒ ,ａｎｄｅｎｅｒｇｙｒｅｓｅｒｖｅｅｔｃ .Ｍｅａｎｗｈｉｌｅ ,ｐｏｌｙｔｈｉｏｐｈｅｎｅｉｓａｌｓｏａｍｏｄ ｅｌｏ…     

Microscopic in situ diffuse reflectance spectroelectrochemistry of solid state electrochemical reactions of particles immobilized on electrodes

An instrumental setup is described which allows electrochemical measurements to be performed with solid particles immobilized on the surface of a graphite electrode with in situ recording of diffuse reflectance spectra under an incident light microscope. The instrument used includes a special electrochemical cell and a microscope which is interfaced by a light␣guide to a transputer-integrated photodiode-array spectrometer allowing measurements ranging from 320 to 950 nm with a resolution of 3.2 nm/pixel and a PC-interfaced potentiostat. The ₀R₀ geometry of the optical arrangement and the use of crossed polarization filters for blocking specular reflectance makes it possible to use the Kubelka-Munk function for quantifying the optical measurements. The above instrument has been used for the study of the electrochromic system of solid silver octacyanomolybdate(IV/V) adjacent to a silver nitrate solution. The in situ diffuse reflec tance spectroelectrochemical measurements prove that the electrochemical reaction starts at the graphite/sample interface and then advances into the bulk of the sample towards the sample/electrolyte interface. The ratios Red:Ox determined by spectrometry and chronocoulometry as a function of electrode potentials are identical.     

红外镜反射光谱的测试与解析

红外镜反射（infrared specular reflection，简称SR）光谱与被测样品和衬底的折射指数、吸收指数以及入射角有密切关系，往往由之产生畸变。要从红外镜反射技术测得的光谱处理得到人们熟悉的吸收光谱，需要经过较复杂的计算机数学处理。本文通过几个比较特殊的镜反射例子，以说明镜反射光谱的测试和解析必须注意多种影响因素。     

In-situ FTIR Spectroelectrochemical and Electrochemical Studies of Ferrocene and Derivatives at a Platinum Electrode

Redox mechanism of ferrocene, acetylferrocene, ferrocenyl cinnamenyl ketone at a platinum electrode was studied with cyclic voltammetry (CV) and in-situ Fourier transform infrared (FTIR) spectroelectrochemistry. The IR bands in the range of 2000-1000cm^-1 attributed to the stretching and ring vibrations of these materials show the main spectral changes in the processes.     

A New Infrared Spectroelectrochemical Cell for the Detection of Species Generated by Platinum and Screen‐Printed Carbon Electrodes

In this paper, we describe a simple and effective infrared (IR) spectroelectrochemical cell for detecting species generated from an electrochemical system featuring low‐IR‐reflectivity electrodes. The IR detection mode of attenuated total reflection (ATR) was employed to construct the spectroelectrochemical cell. Two kinds of electrodes, platinum (Pt) and screen‐printed carbon (SPC), were used to examine the performance of this new cell in detection of electroactive species generated by cyclic voltammetry. Because data generated from highly reflective electrodes are available in the literature, Pt electrode was used to characterize the performances of the developed spectroelectrochemical cell. Results indicated that species generated electrochemically can be observed readily and their responses were comparable to those described in the literature. The cell volume could be lower than 300 μL, which suggests that this approach may be very useful to obtain chemical information during electrochemistry for biological fluids with limited sample volumes. By examining the electrochemical behavior of several amino acids using both Pt and SPC electrodes, the redox behaviors can be readily observed indicating a new spectroelectrochemical cell was successfully developed for the purpose of using of SPC electrode.     

Pt、Cu电极上Fe(CN)_6~(4-)和SCN~-电化学行为的现场FTIR反射吸收光谱研究

本文报道了一种简单有效的现场红外反射吸收光谱电解池设计。对Fe(CN)_~(4-)和SCN~-在Pt、Cu电极上的吸附及电化学反应进行了研究。     

Electrochemical Deposition and Spectroelectrochemical Response of Bromophenol Blue Films on Gold

Bromophenol blue (BPB) was electropolymerized onto a Au substrate. The effects of voltammetric cycle number, BPB concentration, and pH on film thickness, density, optical absorption, and electrochemical susceptibility were evaluated, and favorable deposition conditions were identified. Quantitative measurement of the film mass via quartz crystal microbalance enabled determination of the molar volume and revealed a strong dependence of film density with deposition pH. Finally, electrochemical control of the optical properties of BPB films was demonstrated via in situ spectroelectrochemistry. We believe this is the first demonstration of electropolymerization of pure BPB on Au, and thus the first demonstration of poly(BPB) as an electrochemically switchable optical coating.     

Spectroelectrochemical Sensing Based on Multimode Selectivity Simultaneously Achievable in a Single Device. 15. Development of Portable Spectroelectrochemical Instrumentation

A portable spectroelectrochemical instrument capable of performing in situ sensing has been developed, extending the applicability of spectroelectrochemistry for chemical sensing. All components of the instrument were designed to facilitate real‐time simultaneous display of optical and electrochemical data for remote spectroelectrochemical measurements. Prior to this point in time, spectroelectrochemical measurements were confined to a laboratory setting, and remote analysis was not possible using custom or commercially available instrumentation. The novel instrumentation includes a software package for a portable computer, a small (paperback book sized) optical and electrochemical control unit, and an even smaller remote potentiostat. When the remote potentiostat is operated using fiber optic communication coupled with nine volt battery operation, the unit may operate for finite amounts of time at distances limited only by the attenuation of light in the optical fiber. Comparative studies of the custom instrument with commercially available electrochemical instrumentation were performed and showed excellent agreement. This unit was also tested using the ferricyanide/ferrocyanide reversible electrochemical couple by comparing it to bench top spectroelectrochemical instrumentation previously developed by our group.     

Electrochemical and Spectroelectrochemical Studies on Pyridoxine Hydrochloride Using a Poly(methylene blue) Modified Electrode

The electrochemical redox processes of pyridoxine hydrochloride (VB₆) at a poly(methylene blue) film modified glass carbon electrode (PMBE) in a phosphate buffer solution (PBS, pH 8.0) were studied by cyclic voltammetry. The VB₆ electrode reaction with quasi‐reversible characteristics was diffusion‐controlled at low scan rates and adsorption‐controlled at high scan rates. The anodic peak current positive to 0.6 V (vs. SCE) was found to be proportional to the concentration of VB₆ in the range of 0.010 to 1.03 mg?mL^?1 with a detection limit of 1.34 μg mL^?1. Fluorescence and UV‐vis absorption spectroelectrochemical measurements suggest that the pyridine ring was not destroyed over the potential range from ?0.8 to 1 V (vs. SCE), and the electrocatalytic generation of pyridoxal was anodically started at 0.57 V.     

Infrared and Raman spectroscopic study of 1,2-benzenedithiol adsorbed on silver

Adsorption of 1,2-benzenedithiol (1,2-BDT) on a silver surface has been investigated by surface-enhanced Raman (SER) and reflection-absorption infrared (RAI) spectroscopy. The molecule was adsorbed on silver very favorably by forming two Ag---S bonds after deprotonation. From the RAI spectral pattern, the benzene ring of adsorbed 1,2-BDT was presumed to be tilted by ca. 38° from the surface normal. This RAI information was used to test the validity of various proposed SER selection rules. Being frequently quoted in the literature, the presence or absence of the benzene ring CH stretching vibration in the SER spectrum seemed, in fact, to be a very useful indicator in judging the perpendicular or parallel orientation of the benzene ring with respect to the surface. However, the so-called in-plane/out-of-plane dichotomy as well as the more elaborate symmetry-based electromagnetic selection rule was found not to work in the present system.