Development of high-temperature pulsed slit nozzle and its application to supersonic jet absorption spectrometry

A high-temperature pulsed slit nozzle, consisting of a circular pulsed nozzle and an interface to convert a circular flow into a slit flow has been constructed. The absorption spectrum is measured by scanning the wavelength of the monochromator equipped with a xenon arc lamp and by detecting the transmitted light through a jet with a photomultiplier. A rotationally cooled spectrum is clearly observed for aniline only when a long slit nozzle is employed. The absorptivity increases proportionally to the slit length at least up to 6 cm. The time for recording a spectrum is 3.5 min, which is reduced to several seconds by transmitting a white light through a jet and by measuring the spectrum with an optical multichannel analyzer. The detection limit is estimated to a partial vapor pressure of 0.4 torr for aniline. The present system can be conveniently used in routine analysis, because of a wide spectral coverage of the lamp source.     

Probing the hydroxyl radical-mediated reactivity of peroxynitrite by a spin-labeling fluorophore.

The decomposition of peroxynitrite at physiological pH yielded a hydroxyl radical, which reacted rapidly with dimethyl sulfoxide (DMSO) to produce a methyl radical (*CH3), which was then trapped by a spin-label fluorophore nitroxide-linked naphthalene (NTEMPO), a carbon-centered radical probe with a low fluorescence intensity, and transformed to a stable diamagnetic O-alkoxyamine, a high-fluorescence compound. The fluorescence increment was proportional to the concentration of the hydroxyl radical, and then to the concentration of peroxynitrite. NTEMPO therefore was demonstrated to be capable of detecting hydroxyl radicals generated from peroxynitrite, and the method was proved to be simple and sensitive. The hydroxyl radical-mediated reactivities of peroxynitrite to several amino acids, such as tyrosine, phenylalanine and histidine, were then evaluated by the spin-labeling fluorophore NTEMPO at pH 7.4 and, 37 degrees C. The obtained data were in good agreement with the reference values, respectively.     

Monte Carlo simulations of a coarse grained model for an athermal all-polystyrene nanocomposite system

The structure of a polystyrene matrix filled with tightly cross-linked polystyrene nanoparticles, forming an athermal nanocomposite system, is investigated by means of a Monte Carlo sampling formalism. The polymer chains are represented as random walks and the system is described through a coarse grained Hamiltonian. This approach is related to self-consistent-field theory but does not invoke a saddle point approximation and is suitable for treating large three-dimensional systems. The local structure of the polymer matrix in the vicinity of the nanoparticles is found to be different in many ways from that of the corresponding bulk, both at the segment and the chain level. The local polymer density profile near to the particle displays a maximum and the bonds develop considerable orientation parallel to the nanoparticle surface. The depletion layer thickness is also analyzed. The chains orient with their longest dimension parallel to the surface of the particles. Their intrinsic shape, as characterized by spans and principal moments of inertia, is found to be a strong function of position relative to the interface. The dispersion of many nanoparticles in the polymeric matrix leads to extension of the chains when their size is similar to the radius of the dispersed particles.     

Dominant representations and a markaracter table for a group of finite order

Summary The concept of markaracter is proposed to discuss marks and characters for a group of finite order on a common basis. Thus, we consider a non-redundant set of dominant subgroups and a non-redundant set of dominant representations (SDR), where coset representations concerning cyclic subgroups are named dominant representations (DRs). The numbers of fixed points corresponding to each DR are collected to form a row vecter called a dominant markaracter (mark-character). Such dominant markaracters for the SDR are collected as a markaracter table. The markaracter table is related to a subdominant markaracter table of its subgroup so that the corresponding row of the former table is constructed from the latter. The data of the markaracter table are in turn used to construct a character table of the group, after each character is regarded as a markaracter and transformed into a multiplicity vector. The concept of orbit index is proposed to classify multiplicity vectors; thus, the orbit index of each DR is proved to be equal to one, while that corresonding to an irreducible representation is equal to zero.     

Oriented Nickel Nanonetworks and Their Submicron Fibres as a Basis for a Transparent Electrically Conductive Coating

The paper demonstrates a technique for applying an oriented nickel network to a glass surface. The method is based on the chemical reduction of nickel salt. The shaping and orientation of the resulting system are carried out using a micellar template of a surfactant and a magnetic field. Submicron nickel fibres are used to impart unity to the plurality of individual-oriented nickel nanonetworks. The result is a single conductive coating on the surface of the glass, which has a transparency in the optical range. Investigations of the structure, chemical composition, morphology and electrical conductivity of the coating were performed.     

On-line reaction monitoring by extractive electrospray ionisation

The design and development of a novel extractive electrospray ionisation (EESI) device for on-line reaction monitoring is described. The EESI apparatus uses a secondary, grounded nebuliser to produce an analyte aerosol and a Venturi pump is then used to transfer a sample of the aerosol to an electrospray source where it is ionised. The EESI apparatus was then tested with a variety of small, organic molecules to assess sensitivity, linearity and dynamic range. The performance of the technique will depend on the mass spectrometer used for the experiments; in the configurations used here it has a usable dynamic range of around 3.5 orders of magnitude with a linear range of around 2.5 orders of magnitude and is capable of analysing species present down to low μg/mL with signal-to-noise ratio greater than 2.5. The use of EESI for reaction monitoring was validated using a series of mock reaction mixtures and then used to monitor the base hydrolysis of ethyl salicylate to salicylic acid.     

UV dosimeters based on neotetrazolium chloride

A novel UV dosimeter is described comprising a tetrazolium dye, neotetrazolium chloride (NTC), dissolved in a film of polymer, polyvinyl alcohol (PVA). The dosimeter is pale yellow/colourless in the absence of UV light, and turns red upon exposure to UV light. The spectral characteristics of a typical UV dosimeter film and the mechanism through which the colour change occurs are detailed. The NTC UV dosimeter films exhibit a response to UV light that is related to the intensity and duration of UV exposure, the level of dye present in the films and the thickness of the films themselves. The response of the dosimeter is temperature independent over the range 20–40 °C and, like most UV dosimeters, exhibits a cosine-like response dependence upon irradiance angle. The introduction of a layer of a UV-screening compound which slows the rate at which the dosimeter responds to UVR enables the dosimeter response to be tailored to different UV doses. The possible use of these novel dosimeters to measure solar UV exposure dose is discussed.     

Stability-indicating high-performance liquid chromatographic assay of buspirone HCl

The United States Pharmacopoeia high-performance liquid chromatographic (HPLC) assay method of buspirone is not able to discriminate buspirone from its degradation products. The purpose of this work is to develop a sensitive, selective, and validated stability-indicating HPLC assay for the analysis of a buspirone hydrochloride in a bulk drug. Buspirone HCI and its potential impurities and degradation products are analyzed on an Ultrasphere C18 column heated to 40 degrees C using a gradient program that contains monobasic potassium phosphate buffer solution (pH 6.9) and acetonitrile-methanol mixture (13:17) of 35% for 5 minutes, then increased to 54% in 5.5 minutes. The samples are monitored using a photo-diode array detector and integrated at 244 and 210 nm. The stress testing of buspirone HCI shows that buspirone acid hydrochloride is the major degradation product. The developed method shows a separation of buspirone degradation product and its potential impurities in one run. The stability of buspirone HCI is studied under accelerated conditions in order to provide a rapid indication of differences that might result from a change in the manufacturing process or source of the sample. The forced degradation conditions include the effect of heat, moisture, light, acid-base hydrolysis, sonication, and oxidation. The compatibility of buspirone HCI with some pharmaceutical excipients is studied under stress conditions. The linear range of buspirone HCI is between 5 and 200 ng/microL with a limit of quantitation of 2.5 ng/microL. The intraassay percentage deviation is not more than 0.38%, and the day-to-day variation was not more than 0.80%. The selectivity, repeatability, linearity, range, accuracy, sample solution stability, ruggedness, and robustness show acceptable values.     

Long-term lens organ culture system with a method for monitoring lens optical quality

The Scan Tox System is a method for monitoring lens optical quality (focus or lack of focus) in culture conditions, which mimic conditions inside the eye. The ocular lens is an ideal organ for long-term culture experiments because it has no direct blood supply and no connection to the nervous system. The Scan Tox System makes it possible to keep lenses for long-term studies of up to a few weeks. The use of cultured lenses, mainly bovine, replaces the need for testing the effects of potentially damaging agents on live animals. This optical monitoring apparatus uses a computer-operated scanning laser beam, a video-camera system and a video frame analyzer to record the focal length and transmittance of the cultured lens. The scanner is designed to measure the focal length at points across the diameter of the lens. The lens container permits the lens to be exposed to a vertical laser beam from below. The laser source projects its light onto a plain mirror, which is mounted at 45 degrees C on a carriage assembly. The mirror reflects the laser beam directly up through the test lens. The mirror carriage is connected to a positioning motor, which moves the laser beam across the lens. The camera sees the cross section of the beams and, by examining the image at each position of the mirror, Scan Tox software is able to measure the quality of the lens by calculating the back vertex distance for each beam position. The cultured lenses continue to maintain their original refractive function. When foreign substances are introduced to a cultured lens, the Scan Tox System measures the resulting optical response. This provides a very sensitive means to follow early damage to the eye lens. Because the lens is maintained in an intact state in solutions that are similar to those inside the eye, the lens retains its normal recuperative powers. So in addition to measuring early damage, this system allows measurement of recovery from damage.     

Immobilization of ultra-thin layer of monoclonal antibody on glass surface

When preparing an affinity column and a biosensor, it is desirable to immobilize a unimolecular layer of pure protein on a matrix. In this work, we tried to immobilize a monoclonal antibody on a surface of a glass test-tube as a model, to confirm the stability of this ultra-thin layer by an enzyme immunoassay, and to estimate the thickness of the layer on a slide glass by Fourier transform infrared reflection spectrometry. A new test-tube was washed and dried. The tube was filled with 5% 3-aminopropyltriethoxysilane. The 3-aminopropylsilylated surface was treated with glutaraldehyde and 5.6.10(-2) mg/ml solution of a normal mouse monoclonal antibody. The Schiff base between glutaraldehyde and the antibody was further reduced with 7.9.10(-3)% NaBH4. The tube was washed with 0.05% Tween 20 to block non-specific binding. The antibody immobilized on the surface was measured by an enzyme immunoassay based on a reaction of anti-mouse immunoglobulin G labelled with alkaline phosphatase, with which p-nitrophenol was produced from p-nitrophenylphosphate as a substrate. Meanwhile, various amounts of the antibody were immobilized on slide glasses in the same manner. The antibody on each surface was measured by Fourier transform infrared reflection spectrometry. The antibody immobilized under the final conditions was detectable by the enzyme immunoassay, and stable at 4 degrees C for ten days. The antibody on the slide glass was a unimolecular layer, as judged from the Fourier transform infrared spectra referred to -CONH- band semiquantitatively. Thus, we found the optimal conditions for immobilizing an ultra-thin layer of the monoclonal antibody on the glass surface.(ABSTRACT TRUNCATED AT 250 WORDS)     

Calcium selective test strip for water and milk

We have developed a selective and reversible test strip based on an ion-exchange mechanism to determine calcium. The optical test strip contains a polymeric film of plasticised PVC that contains all of the reagents necessary to produce a response to calcium, among them the new ionophore, 4,13-bis[(N-adamantylcarbamoyl)propionyl]-1,7,10,16-tetraoxa-4,13-diazacyclooctadecane. The measurement of the absorbance at 655 nm in a standard photometer makes it possible to determine calcium activities. The composition of the membrane and reaction conditions have been adjusted to obtain adequate selectivity. The test strip responded linearly to calcium between 0.050 and 135 mM in activities. The reproducibility intermembrane at a medium level of the range was 6.2%, as RSD, of log a(Mg(2+)), and 3.4% as RSD intramembrane. The procedure was applied to the determination of calcium ion in different types of waters (tap, well, spring and mineral) and milks (whole, skimmed, skimmed with calcium added, special types) validating the results against a reference procedure.     

Microcomputer-aided optimal selection of control input for the precision water bath of a heat exchange calorimeter

In heat exchange calorimetry, sample and reference vessels are fixed differentially in a water bath. The heat evolved in the sample vessel is exchanged freely with the ambient water. The accuracy and precision of the calorimetry depend on the temperature range of the drift and fluctuation in the bath water. In the present report, a simple temperature-control system with no empirical factors is proposed for the precision water bath. The heat exchange between the inside of the vessels and the ambient water is expressed by a differential equation or a Newtonian cooling equation. Similarly, the thermal behaviour of a water bath placed in a non-air-conditioned laboratory was also considered to be expressed by the same equation. The heat exchanged with the surroundings, the non-stationary heat flow from warm stirrer motors, and other thermal factors were considered to be part of the heat sources. Cooling water about 2°C lower than the set temperature was circulated in the water bath. The difference between the set temperature and the observed temperature was fed into a microcomputer every second. The latest four data points were used to fit a modified Newtonian equation by the common method of least-squares. The control input to the bath was calculated and given to the heater circuit after power amplification. The program written in basic was about 3.3 kbyte. The controlled range of drift and fluctuation was almost the same, or better, as that previously reported.     

One-pot synthesis of hollow superparamagnetic CoPt nanospheres

Hollow metal nanospheres are of interest for a variety of academic and technological applications, including drug delivery, catalysis, plasmonics, and lightweight structural composites. Despite recent advances in synthesizing metal nanostructures with controlled morphologies, there are very few reports of hollow bimetallic nanospheres, although such systems promise to offer advantages over single-metal systems. Here, were report a one-pot synthetic strategy for accessing hollow CoPt nanospheres with a Co-Pt alloy structure. The approach utilizes an in situ Co template and exploits galvanic displacement reactions to selectively dissolve the Co core while depositing a Pt shell. The combination of reducing conditions and a polymer stabilizer appears to allow the Co and Pt to co-reduce and form a Co-Pt fcc alloy phase with a morphology that is templated by the sacrificial Co core. The hollow CoPt nanospheres, which show magnetic hysteresis at low temperatures, are thermally stable up to 300 degrees C. The approach, which adds to a growing toolbox of reactions that yield morphologically controlled magnetic CoPt and FePt nanomaterials, is likely to be general for a variety of alloy systems.     

Melting behavior of an idealized membrane model

The melting behavior of an idealized model giving rise to two-dimensional (2D) structures at low temperature and low density is investigated by Monte Carlo simulations. The system is made of particles carrying a spin of constant length and variable orientation, whose potential energy is the sum of a repulsive spherical pair interaction, and of a spin-spin contribution, reminiscent of but essentially different from the electrostatic dipole-dipole interaction. The simulation results show that the model phase diagram is determined by the interplay of a ferro- to paraelectric transition in the spin part and of the solid to fluid transition found in simple pair-potential models. The 2D solid melts into a three-dimensional (3D) fluid when the spin-spin interaction is weak. Strong spin-spin interactions give rise to two transitions, the first one corresponding to the melting of the 2D solid into a 2D fluid, and the second one corresponding to the crossover from a 2D to a 3D fluid. The fluid phase stable in between these two transitions provides a model for the liquid state arising in organic and biological membranes across their main transition.     

One-dimensional analysis of the wall region for a multiple-temperature argon plasma

The present analysis is restricted to the wall region for a confined gas plasma and applied specifically to an argon plasma. The wall may be either positive or negative in potential with respect to the plasma, and the electric current may flow either parallel or normal to the wall. Estimates of the Debye shielding distance and the mean free path of various components are made to obtain the range of validity of the analysis, in addition to the situation where the wall acts like a cathode, an anode, or an electrical insulation. Analysis is for a one-dimensional case with an outer boundary, where the plasma temperature is specified. The computational domain is split into a continuum region, where both equilibrium compositions for a two-temperature plasma and a chemically reacting plasma are studied, and a free-fall region. The results allow a quantitative assessment of temperature nonequilibrium and electrical potential distribution in the free-fall region.     

Direct coupling of polymer-based microchip electrophoresis to online MALDI-MS using a rotating ball inlet

We report on the coupling of a polymer-based microfluidic chip to a MALDI-TOF MS using a rotating ball interface. The microfluidic chips were fabricated by micromilling a mold insert into a brass plate, which was then used for replicating polymer microparts via hot embossing. Assembly of the chip was accomplished by thermally annealing a cover slip to the embossed substrate to enclose the channels. The linear separation channel was 50 microm wide, 100 microm deep, and possessed an 8 cm effective length separation channel with a double-T injector (V(inj) = 10 nL). The exit of the separation channel was machined to allow direct contact deposition of effluent onto a specially constructed rotating ball inlet to the mass spectrometer. Matrix addition was accomplished in-line on the surface of the ball. The coupling utilized the ball as the cathode transfer electrode to transport sample into the vacuum for desorption with a 355 nm Nd:YAG laser and analyzed on a TOF mass spectrometer. The ball was cleaned online after every rotation. The ability to couple poly(methylmethacrylate) microchip electrophoresis devices for the separation of peptides and peptide fragments produced from a protein digest with subsequent online MALDI MS detection was demonstrated.     

Excretion of iodide in 24-h urine as determined by ion-pair reversed-phase liquid chromatography with electrochemical detection

A simple method is presented for the routine analysis of iodide in urine. After a one-step sample clean-up, iodide was separated by ion-pair reversed-phase liquid chromatography and detected electrochemically with a silver electrode. The coefficient of variation of a single analysis of iodide in a pooled urine sample (530 nmol/l) was 7.6%. The detection limit, derived from a signal-to-noise ratio of 3, was 3 pmol, corresponding to 0.06 mumol/l. The recovery of iodide added to urine was 96 +/- 7%. The accuracy of the method was assessed by analysing ten different samples with neutron activation analysis. The data obtained with the two methods showed a high correlation (r = 0.991) and did not differ significantly. Excretion of iodide in samples of 24-h urine from a free-living population was shown to have a log-normal distribution and to be higher in men than in women. The iodide/creatinine ratio was independent of sex and increased with age.     

An easy access to bioactive 13-hydroxylated and 11,13-dihydroxylated sesquiterpene lactones (SLs) through Michael addition of a nucleophilic hydroxyl group

The addition of a hydroxyl group to α,β-unsaturated carbonyl systems provides a new and easy access to bioactive difunctionalized sesquiterpene lactones (SLs) through a Michael addition to the α-methylene-γ-lactone system. The use of HMPA to enhance the nucleophilic properties of the hydroxyl groups and to stabilize the enolate is discussed. Also, we present a proposal for the mechanism based on the experimental data obtained. The scope and usefulness of the reaction are explored with other substrates and is limited by the need for a certain level of steric hindrance to avoid chain polycondensations. Nevertheless, the reaction works with esters, ketones and aldehydes. The absolute stereochemistry of some products has been elucidated by X-ray diffraction analysis. The synthesis of a natural SL using this methodology and the correction of the structure of another illustrate the usefulness of this reaction.     

Experimental evidence supporting a CuIII intermediate in cross-coupling reactions of allylic esters with diallylcuprate species

The reaction between an allylic ester and a magnesium diallylcuprate, or an allylic Grignard reagent in combination with a catalytic amount of a copper salt, has been studied. These reactions yield a mixture of homo- and cross-coupled 1,5-diene products. The product ratios obtained are close to those expected for a reaction proceeding via a triallylcopper(III) intermediate consisting of three equivalent allyl groups bound to copper. When the reaction is performed with a stoichiometric amount of a preformed diallylcuprate, a homo-coupling/cross-coupling ratio larger than that predicted for a CuIII intermediate is observed. However, on dilution this ratio decreases and becomes close to the predicted ratio. The deviation from the predicted homo-coupling/cross-coupling ratio was accounted for by an olefin-induced homo-coupling, as demonstrated in control experiments. The possibility of the allylic ligands to coordinate to the metal center in a eta3 or eta1 fashion provides an opportunity for the stabilization of the intermediate CuIII species.     

Lev Germanovich Berg 1896–1974

The accuracy of a simple, well-known approximation to the solution of the adiabatic explosion problem is examined, and it is shown that, with a minor modification, the approximation can be converted to a form accurate to 1% or better for a wide range of the input parameters. The final result lies well within the capabilities of even the simpler scientific calculators. The effects of depletion of the reactant and a temperature-dependent heat capacity, not included in the development, are briefly evaluated.