Concentration dependence of critical exponents for gelation in gellan gum aqueous solutions upon cooling

The sol-gel transition in aqueous gellan gum solutions induced upon cooling was investigated by rheology measurements. The gelation temperature was determined from the crossover point of storage and loss moduli, i.e., G′ = G′′ (T_c) and from the Winter’s criterion (T_gel), respectively, which increased with gellan concentration. T_gel was higher than T_c and the difference became larger as the gellan concentration got higher. The relaxation critical exponent n was estimated with the Winter’s method and the self-similarity was observed from the critical gel. The scaling for the zero-shear viscosity η₀ before the gel point and the equilibrium modulus G_e after the gel point was established against the relative distance ε from the gel point over the gellan concentration C_g of 1.0-2.5 wt%, giving the critical exponents k and z. The critical exponent n calculated from k and z agrees well with n from the Winter’s criterion. However, no universal n was found for the gelation in aqueous gellan gum solutions, indicating that this gelation should be classified into the cross-linking category for the physical gelation. The critical exponent n decreased with increasing C_g for the gellan gum solution. The fractal dimension d_f calculated from n with the screened hydrodynamic interaction and the excluded volume effect suggested a denser structure in the critical gel with higher C_g.     

Immobilization of Phenylalanine Dehydrogenase and Its Application in Flow-Injection Analysis System for Determination of Plasma Phenylalanine

Phenylalanine dehydrogenase (l-PheDH) from Sporosarcina ureae was immobilized on DEAE-cellulose, modified initially with 2-amino-4,6-dichloro-s-triazine followed by hexamethylenediamine and glutaraldehyde. The highest activity of immobilized PheDH was determined as 95.75 U/g support with 56% retained activity. The optimum pH value of immobilized l-PheDH was shifted from pH 10.4 to 11.0. The immobilized l-PheDH showed activity variations close to the maximum value in a wider temperature range of 45–55 °C, whereas it was 40 °C for the native enzyme. The pH and the thermal stability of the immobilized l-PheDH were also better than the native enzyme. At pH 10.4 and 25 °C, K _m values of the native and the immobilized l-PheDH were determined as K _{m Phe} = 0.118, 0.063 mM and K _{m NAD}⁺ = 0.234, 0.128 mM, respectively. Formed NADH at the exit of packed bed reactor column was detected by the flow-injection analysis system. The conversion efficiency of the reactor was found to be 100% in the range of 5–600 μM Phe at 9 mM NAD⁺ with a total flow rate of 0.1 mL/min. The reactor was used for the analyses of 30 samples each for 3 h per day. The half-life period of the reactor was 15 days.     

The gelation of hydroxypropyl guar gum by nano‐ZrO2

In the study, hydroxypropyl guar gum (HPG) gel is prepared by using Nano‐ZrO₂ particles as the cross‐linking agent. The Nan‐ZrO₂ particles are prepared by using oil‐water interface method. The physical properties such as morphology, particle size, and crystal structure of the Nano‐ZrO₂ particles are analyzed by SEM, particle size analyzer, FT‐IR, and XRD, respectively. The results show that the Nano‐ZrO₂ particles are spherical particles with a little agglomeration; these spherical particles have a tetragonal structure and higher crystallinity, and the mean diameter of the first‐level grain is 24 nm. The rheological properties including shear stress, complex modulus, elasticity modulus (G′), and viscosity modulus (G′′) of the Nano‐ZrO₂ cross‐linked HPG gel are investigated. The results show that the Nano‐ZrO₂ cross‐linked HPG gel is a pseudo‐plastic non‐Newtonian fluid with higher elastic modulus (G′ > G′′) and lower tanδ (tanδ < 1, the ratio of viscous and elastic modulus), which indicate that the Nano‐ZrO₂ cross‐linked HPG gel may have potential application in fracturing.     

Two-Dimensional Proton Chemical Shift Correlated NMR Spectroscopy of Digitoxose1

Abstract

The hydroxyl proton coupled ¹H NMR spectra of solutions of β-d-digitoxopyranose and of an equilibrated mixture of the four ring forms of d-digitoxose in dimethylsulfoxide-d ₆ have been assigned completely by two-dimensional, proton chemical shift correlated NMR spectroscopy and spin decoupling at 400 MHz. Analysis of resolution enhanced, one-dimensional ¹H NMR spectra yielded an almost complete set of CH and OH proton-proton coupling constants for the four ring forms. The free aldehydo form of d-digitoxose in dimethylsulfoxide-d ₆ solution has been detected by means of its characteristic H-l quartet at 6 9.687. Quantitative analysis of the equilibrated mixture of the five forms of d-digitoxose gave the composition:- α-pyranose, β-pyranose, α-furanose, β-furanose, aldehydo form, 11.2, 67.3, 8.4, 13.0, and 0.1%, respectively. The ⁴ C ₁ chair conformations have been assigned to the α- and β-pyranose forms by analysis of the coupling constants and are discussed qualitatively in terms of their relative stabilities.     

Purification and Characterization of a Low Molecular Weight of β-Mannanase from Penicillium occitanis Pol6

The highest β-mannanase activity was produced by Penicillium occitanis Pol6 on flour of carob seed, whereas starch-containing medium gave lower enzymes titles. The low molecular weight enzyme was purified to homogeneity by ammonium sulfate precipitation, gel filtration, and ion-exchange chromatography procedures. The purified β-mannanase (ManIII) has been identified as a glycoprotein (carbohydrate content 5%) with an apparent molecular mass of 18 kDa. It was active at 40 °C and pH 4.0. It was stable for 30 min at 70 °C and has a broad pH stability (2.0–12.0). ManIII showed K _m, V _max, and K _cat values of 17.94 mg/ml, 93.52 U/mg, and 28.13 s⁻¹ with locust bean gum as substrate, respectively. It was inhibited by mannose with a K _I of 0.610⁻³ mg/ml. ManIII was activated by CuSO₄ and CaCl₂ (2.5 mM). However, in presence of 2.5 mM Co²⁺, its activity dropped to 60% of the initial activity. Both N-terminal and internal amino acid sequences of ManIII presented no homology with mannanases of glycosides hydrolases. During incubation with locust bean gum and Ivory nut mannan, the enzyme released mainly mannotetraose, mannotriose, and mannobiose.     

Structural characteristics of crosslinking domain in gellan gum gel

Gellan gum samples having different counterions of TMA⁺ (tetramethyl-ammonium ion), Na⁺, K⁺ and Cs⁺ were prepared, and the small-angle X-ray scattering was observed from the aqueous solutions of those samples. A sharp peak appears in the SAXS profile at low temperature, indicating the electrostatic interaction between the domains composed of multiple gellan gum chains. The SAXS profile revealed a rigid rod-like characteristics of gellan gum chain. The cross-sectional radius of gyration was evaluated from the scattering profiles, and the gelation mechanism was discussed from the change of the cross-sectional radius of gyration upon gel-sol transition. Taking the difference of the scattering power of counter ions into account, the ion condensation due to gelation was evaluated from the excess scattering of Cs⁺ gellan gum with respect to K⁺ gellan gum in respective aqueous solutions.     

Effect of polymer and ion concentration on mechanical and drug release behavior of gellan hydrogels using factorial design

Developing optimized hydrogel products requires an in-depth understanding of the mechanisms that drive hydrogel tunability. Here, we performed a full 4 × 4 factorial design study investigating the impact of gellan, a naturally derived polysaccharide (1%, 2%, 3%, or 4% w/v) and CaCl₂ concentration (1, 3, 7, or 10 mM) on the viscoelastic, swelling, and drug release behavior of gellan hydrogels containing a model drug, vancomycin. These concentrations were chosen to specifically provide insight into gellan hydrogel behavior for formulations utilizing polymer and salt concentrations expanding beyond those commonly reported by previous studies exploring gellan. With increasing gellan and CaCl₂ concentration, the hydrogel storage moduli (0.1–100 kPa) followed a power-law relationship and on average these hydrogels had higher liquid absorption capability and greater total drug release over 6 days. We suggest that the effects of gellan and CaCl₂ concentration and their interactions on hydrogel properties can be explained by various phenomena that lead to increased swelling and increased resistance to network expansion.     

Chiral separation of ofloxacin enantiomers by ligand exchange chromatography

Abstract  

The enantioseparation conditions of ligand exchange chromatography were examined using ofloxacin enantiomers. A C₁₈ column was used with the mobile phase consisting of a methanol–water solution (containing different concentrations of l-isoleucine and copper sulfate) at flow rate of 0.5 cm³ min⁻¹. The effect of different kinds and concentrations of ligands, bivalent ligand ions, and organic modifier, and temperature on enantioseparation were evaluated; the results showed that enantioselectivity was strongly affected by the ligand concentration of the mobile phase. Under the optimum conditions (methanol/water 20:80 v/v, containing 2.5 mmol dm⁻³ l-isoleucine and 0.6 mmol dm⁻³ Cu²⁺, room temperature), baseline separation of the two enantiomers was obtained with resolution of 1.32 in less than 30 min. The separation method was used to analyze the ofloxacin enantiomers in different commercial medicines.     

Low-temperature thermodynamic properties of <Emphasis Type="SmallCaps">dl</Emphasis>-cysteine

Heat capacity C _p(T) of the crystalline dl-cysteine was measured on heating the system from 6 to 309 K by adiabatic calorimetry; thermodynamic functions were calculated based on these data smoothed in the temperature range 6–273.15 K. The values of heat capacity, entropy, and enthalpy at 273.15 K were equal to 142.4, 153.3, and 213.80 J K⁻¹ mol⁻¹, respectively. At about 300 K, a heat capacity peak was observed, which was interpreted as an evidence of a first-order phase transition. The enthalpy and the entropy of the transition are equal, respectively, to 2300 ± 50 and 7.6 ± 0.1 J K⁻¹ mol⁻¹.     

Structure elucidation of uniformly <Superscript>13</Superscript>C-labeled bacterial celluloses from different <Emphasis Type="Italic">Gluconacetobacter xylinus</Emphasis> strains

The morphological and supramolecular structures of native cellulose pellicles from two strains of Gluconacetobacter xylinus (ATCC 53582, ATCC 23769) were investigated. Samples had been statically cultivated in Hestrin-Schramm medium containing fully ¹³C-labeled β-d-glucose-U-¹³C₆ as the sole source of carbon. The results are compared with structure data of bacterial celluloses with a natural ¹³C abundance of 1.1%. Non-enriched and ¹³C-labeled cellulose pellicles formed crystalline structures as revealed by cross-polarized/magic-angle spinning (CP/MAS) ¹³C{¹H}-NMR and near infrared (NIR) FT-Raman spectroscopic measurements as well as wide-angle X-ray diffraction (WAXD) investigations. Atomic force microscopy (AFM) was applied for analyzing fiber morphologies and surface properties. For the first time, details about the manipulation of fiber widths and pellicle formation were shown for different bacterial strains of G. xylinus depending on the use of β-d-glucose-U-¹³C₆ for the biosynthesis.     

Estimation of radiological indices in Indian Sundarbans: a mangrove habitat

Stereoscopic porous microspheres based gellan gum (GG–Ca) were successfully prepared by sol–gel method using ethyl acetate as porogen and glutaraldehyde as crosslinker. The obtained GG–Ca microspheres were mainly of mesoporous with the average pore diameter was about 4 nm. It displayed a higher ability for uranium removal. In addition, the uranium adsorption process was endothermic and spontaneous following a pseudo-second-order and the adsorption isotherm was the best fit with the Freundlich model with maximum uranium capacity of 202.26 mg g⁻¹. The UO²⁺ adsorption mechanism is ion-exchange with Ca²⁺ based on SEM, EDX and XPS data analysis.

     

High Soluble Expression of <Emphasis Type="SmallCaps">d</Emphasis>-Amino Acid Oxidase in <Emphasis Type="Italic">Escherichia coli</Emphasis> Regulated by a Native Promoter

To express high-active soluble d-amino acid oxidase (DAAO), a constitutive plasmid that is regulated by a native hydantoinase promoter (P_Hase), was constructed. A d-amino acid oxidase gene (dao) was ligated with the P_Hase and cloned into pGEMKT to constitutively express protein of DAAO without the use of any inducer such as isopropyl β-d-1-thiogalactopyranoside which is poisonous to the cells and environment. The ribosome binding site region, host strain, and fermentation conditions were optimized to increase the expression level. When cultivated in a 5-m³ fermenter, the enzyme activity of JM105/pGEMKT-R-DAAO grown at 37 °C was found to be 32 U/mL and increase 16-fold over cells of BL21(DE3)/pET-DAAO grown at 28 °C. These results indicate the success of our approaches to overproducing DAAO in soluble form in Escherichia coli.     

Activity coefficients of CaCl2 in (serine or proline + water) mixtures at T = 298.15 K

Activity coefficients for the (CaCl₂ + amino acid + water) system were determined at a temperature of 298.15 K using ion-selective electrodes. The range of molalities of CaCl₂ is (0.01 to 0.20) mol · kg^?1, and that of amino acids is (0.10 to 0.40) mol · kg^?1. The activity coefficients obtained from the Debye–Hückel extended equation and the Pitzer equation are in good agreement with each other. Results show that the interactions between CaCl₂ and amino acid are controlled mainly by the electrostatic interactions (attraction). Gibbs free energy interaction parameters (g_EA) and salting constants (k_S) are positive, indicating that these amino acids are salted out by CaCl₂. These results are discussed based on group additivity model.     

Comparative study of Factor Xa fluorogenic substrates and their influence on the quantification of LMWHs

Low molecular weight heparins (LMWHs) are recognised as the preferred anticoagulants in the prevention and treatment of venous thromboembolism. Anti-Factor Xa (anti-FXa) levels are used to monitor the anticoagulant effect of LMWHs and such assays are routinely employed in hospital diagnostic laboratories. In this study, a fluorogenic anti-FXa assay was developed using a commercially available fluorogenic substrate with an attached 6-amino-1-naphthalene-sulfonamide (ANSN) fluorophore and was used for the determination of two LMWHs, enoxaparin and tinzaparin and the heparinoid, danaparoid. The assay was based on the complexation of heparinised plasma with 100 nM exogenous FXa and 25 μM of the fluorogenic substrate Mes-D-LGR-ANSN (C₂H₅)₂ (SN-7). The assay was tested with pooled plasma samples spiked with anticoagulant concentrations in the range 0–1.6 U mL⁻¹. The statistically sensitive assay range was 0–0.4 U mL⁻¹ for enoxaparin and tinzaparin and 0–0.2 U mL⁻¹ for danaparoid, with assay variation typically below 10.5%. This assay was then compared with a previously published fluorogenic anti-FXa assay developed with the peptide substrate, methylsulfonyl-d-cyclohexylalanyl-glycyl-arginine-7-amino-4-methylcoumarin acetate (Pefafluor FXa). Both assays were compared in terms of fluorescence intensity, lag times and sensitivity to anticoagulants.     

Structural characterization of gentiobiosyl diglycerides fromBacillus pumilus associated with ascidiaHalocynthia aurantium

A mixture of 1(3),2-di-O-acyl-3(1)-O-β-gentiobiosylglycerols was isolated from a sea isolate ofBacillus pumilus. The components of the mixture were structurally characterized by mass spectrometry and¹H and¹³C NMR spectroscopy data for the native compounds and their derivatives. The predominant component contains two C₁₅ acyl groups, while the second component contains C₁₅ and C₁₇ fatty acids. Six minor components differ in residues of fatty acids and/or their combinations. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 1, pp. 166–170, January, 2000.     

Liquid-crystalline CuII and PdII complexes with nonmesogenic ferrocene-containing β-aminovinyl ketone

New liquid-crystalline heteropolynuclear complexes L₂M (M=Cu²⁺ (2a), Pd²⁺ (2b)) were synthesized by the reactions of C₅H₅FeC₅H₄−C₆H₄NH−C₂H₂−(CO)−C₆H₄OC₁₂H₂₅ (1, LH) with copper(ii) and palladium(ii) acetates. Compound2b was found to possess monotropic nematic and smectic phases;2a exhibits the monotropic nematic phase and a phenomenon of “double melting”. The compositions and structures of compounds1 and2a,b were established by elemental analysis,¹H and¹³C NMR, ESR, and IR spectroscopy. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 381–383, February, 1999.     

Radical scavenging efficiency of different fullerenes C60-C70 and fullerene soot

This investigation was undertaken to determine the antioxidant activity of a range of fullerenes C₆₀ and C₇₀ in order to rank them according to their comparative efficiency. The model reaction of initiated (2,2′- azobisisobutyronitrile, AIBN) cumene oxidation was used to determine rate constants for addition of radicals to fullerenes. Measurements of oxidation rates in the presence of different fullerenes showed that the antioxidant activity as well as the mechanism and mode of inhibition were different for fullerenes C₆₀ and C₇₀ and fullerene soot. All fullerenes - C₆₀ of gold grade, C₆₀/C₇₀ (93/7, mix 1), C₆₀/C₇₀ (80 ± 5/20 ± 5, mix 2) and C₇₀ operated as alkyl radical acceptora, whereas fullerene soot surprisingly retarded the model reaction by a dual mode similar to that for the fullerenes and with an induction period like many of the sterically hindered phenolic and amine antioxidants. For the C₆₀ and C₇₀ the oxidation rates were found to depend linearly on the reciprocal square root of the concentration over a sufficiently wide range thereby fitting the mechanism for the addition of cumylalkyl radicals to the fullerene core. This is consistent with literature data on the more ready and rapid addition of alkyl and alkoxy radicals to the fullerenes compared with peroxy radicals. Rate constants for the addition of cumyl radicals to the fullerenes were determined to be k_(333K) = (1.9 ± 0.2) × 10⁸ (C₆₀); (2.3 ± 0.2) × 10⁸ (C₆₀/C₇₀, mix 1); (2.7 ± 0.2) × 10⁸ (C₆₀/C₇₀, mix 2); (3.0 ± 0.3) × 10⁸ (C₇₀), M⁻¹ s⁻¹. The increasing C₇₀ constituent in the fullerenes leads to a corresponding increase in the rate constant.The fullerene soot inhibits the model reaction according to the mechanism of trapping of peroxy radicals; the oxidation proceeds with a pronounced induction period and kinetic curves are linear in semi-logarithmic coordinates.For the first time the effective concentration of inhibiting centres and inhibition rate constants for the fullerene soot have been determined to be fn[C₆₀−soot] = (2.0 ± 0.1) × 10⁻⁴ mol g⁻¹ and k_inh = (6.5 ± 1.5) × 10³ M⁻¹ s⁻¹ respectively.The kinetic data obtained specify the level of antioxidant activity for the commercial fullerenes and scope for their rational use in different composites. The results may be helpful for designing an optimal profile of composites containing fullerenes.     

Room-temperature ionic liquid as a new solvent to prepare high-quality dodecanethiol self-assembled monolayers on polycrystalline gold

This paper reports a new solvent, room-temperature ionic liquid (RTIL), for the preparation of dodecanethiol self-assembled monolayers (C₁₂SH-SAMs) on polycrystalline gold. The quality of C₁₂SH-SAMs was characterized by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). From CV experiments, we find that the differential capacitance C_d values of the C₁₂SH-SAM prepared in RTIL, 1-butyl-3-methylimidazolium hexafluorophosphate ([BMIM]PF₆) containing 10 μL neat C₁₂SH for 24 h (C₁₂SH-SAMs_{[BMIM]PF6,10 μL,24 h}) are independent of the scan rate, the effective thickness d_eff value and the average cant angle φ value of this monolayer are 18 ± 1 Å and 27 ± 4°, respectively. The difference value of the current density at −0.2 and 0.5 V (Δi_p) is only 0.73 ± 0.18 μA cm⁻². EIS experiments show that the phase angle value at 1 Hz Φ_1 Hz, the charge transfer resistance R_ct value and surface coverage θ value of this C₁₂SH-SAM are 88.2 ± 0.7°, 3.44 ± 1.91 MΩ cm² and 99.998 ± 0.001%, respectively. These results indicate that high-quality C₁₂SH-SAMs can be formed in [BMIM]PF₆. In addition, the rate of formations of high-quality C₁₂SH-SAMs in RTIL can be substantially improved by ultrasound.     

The Electrochemical Properties of 12-Molybdophosphoric Acid Modified Ionic Liquid Carbon Paste Electrode

A [C₈mim]₃PMo₁₂O₄₀-modified ionic liquid carbon paste electrode ([C₈mim]₃PMo₁₂O₄₀-ILCPE, C₈mim = 1-methyl-3-octylimidazolium) was successfully fabricated. Its electrochemical properties were carried out on the cyclic voltammograms. The results of the cyclic voltammograms indicated that [C₈mim]₃PMo₁₂O₄₀-ILCPE exhibited remarkable electrocatalytic activities toward the reduction of BrO₃ ⁻ and good stability. The value of I_pc was as a function with the concentration of bromate from 2 × 10⁻⁶ to 1 × 10⁻⁴ M, which indicated that the [C₈mim]₃PMo₁₂O₄₀-ILCPE can be a candidate for electrochemical sensor.     

Synthesis and properties of bis(biphenyl)chromium(<Emphasis Type="SmallCaps">i</Emphasis>) 1,4-di(2-cyanoisopropyl)-1,4-dihydrofulleride and 1-(2-cyanoisopropyl)-1,2-dihydrofullerene

Radical-ion salts bis(biphenyl)chromium(i) 1,4-di(2-cyanoisopropyl)-1,4-dihydrofulleride [(Ph₂)₂Cr]^+·[1,4-(CMe₂CN)₂C₆₀]^−· and bis(biphenyl)chromium(i) 1-(2-cyanoisopropyl)-1,2-dihydrofulleride [(Ph₂)₂Cr]^+·[1,2-(CMe₂CN)(H)C₆₀]^−·, the salt bis(biphenyl)chromium(i) (2-cyanoisopropyl)fulleride [(Ph₂)₂Cr]^+·[(CMe₂CN)C₆₀]⁻, and neutral 1-(2-cyanoisopropyl)-1,2-dihydrofullerene 1,2-(CMe₂CN)(H)C₆₀ have been synthesized for the first time. The compounds [(Ph₂)₂Cr]^+·[1,4-(CMe₂CN)₂C₆₀]^−· and [(Ph₂)₂Cr]^+·[1,2-(CMe₂CN)(H)C₆₀]^−· decompose in THF to form [(Ph₂)₂Cr]^+·[(CMe₂CN)C₆₀]⁻, whose protonation affords 1,2-(CMe₂CN)(H)C₆₀. 1,4-Di(2-cyanoisopropyl)-1,4-dihydrofullerene 1,4-(CMe₂CN)₂C₆₀ and 1,2-(CMe₂CN)(H)C₆₀ are stable in vacuo up to 513 K. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1935–1939, September, 2008.