Fluorobenziodoxole−BF3 Reagent for Iodo(III)etherification of Alkynes in Ethereal Solvent

A combination of fluorobenziodoxole (FBX) and BF₃ ? OEt₂ in cyclopentyl methyl ether promotes regio‐ and stereoselective addition of benziodoxole and methoxy groups to alkynes. This difunctionalization reaction tolerates a variety of functionalized internal and terminal alkynes to afford trans‐β‐alkoxyvinylbenziodoxoles, which represent versatile precursors to stereochemically well‐defined multisubstituted vinyl ethers. The reaction is proposed to involve cleavage of the I?F bond of FBX by BF₃, followed by electrophilic activation of the alkyne by the resulting cationic I^III species that triggers the nucleophilic addition of the ethereal oxygen.     

Mapping the Interactions of I2, I., I−, and I+ with Alkynes and Their Roles in Iodocyclizations

A combination of experiment and theory has been used to explore the mechanisms by which molecular iodine (I₂) and iodonium ions (I⁺) activate alkynes towards iodocyclization. Also included in the analysis are the roles of atomic iodine (I ^. ) and iodide ion (I^?) in mediating the competing addition of I₂ to the alkyne. These studies show that I₂ forms a bridged I₂–alkyne complex, in which both alkyne carbons are activated towards nucleophilic attack, even for quite polarized alkynes. By contrast, I⁺ gives unsymmetrical, open iodovinyl cations, in which only one carbon is activated toward nucleophilic attack, especially for polarized alkynes. Addition of I₂ to alkynes competes with iodocyclization, but is reversible. This fact, together with the capacity of I₂ to activate both alkyne carbons towards nucleophilic attack, makes I₂ the reagent of choice (superior to iodonium reagents) for iodocyclizations of resistant substrates. The differences in the nature of the activated intermediate formed with I₂ versus I⁺ can also be exploited to accomplish reagent‐controlled 5‐exo/6‐endo‐divergent iodocyclizations.     

Investigation and Comparison of the Mechanistic Steps in the [(Cp*MCl2)2] (Cp*=C5Me5; M=Rh,Ir)‐Catalyzed Oxidative Annulation of Isoquinolones with Alkynes

The mechanism of the [(Cp*MCl₂)₂] (M=Rh, Ir)‐catalyzed oxidative annulation reaction of isoquinolones with alkynes was investigated in detail. In the first acetate‐assisted C? H‐activation process (cyclometalated step) and the subsequent mono‐alkyne insertion into the M? C bonds of the cyclometalated compounds, both Rh and Ir complexes participated well. However, the desired final products, dibenzo[a,g]quinolizin‐8‐one derivatives, were only formed in high yield when the Rh species participated in the final oxidative coupling of the C? N bond. Moreover, a Rh^I sandwich intermediate was isolated during this transformation. The iridium complexes were found to be inactive in the oxidative coupling processes. All of the relevant intermediates were fully characterized and determined by single‐crystal X‐ray diffraction analysis. Based on this mechanistic study, a Rh^III→Rh^I→Rh^III catalytic cycle was proposed for this reaction.     

Polyvalent perfluoroorgano- and selected polyfluoroorgano-halogen(III and V) compounds

This review compiles important aspects of the chemistry of polyvalent perfluoroorganohalogen(III and V) compounds of the last three decades and reports on distinctions which are worth mentioning in comparison with non-fluorinated polyvalent organohalogen(III and V) analogues. Besides general synthetic paths to neutral (R_FHalX₂, (R_F)₂IX, (R_F)₃I, and R_FHalX₄), cationic ([R_F(R′)Hal]Y and [R_F(R′)HalF₂]Y), and anionic (M[R_FHalX₃] and M[(R_F)₂HalX₂]) derivatives of iodine and bromine, transformations at the halogen centre of those polyvalent compounds and selected applications and their use as reagents are referred. Trends of ¹⁹F and ¹³C NMR spectroscopic properties of prototypes of polyvalent perfluoroorgano-iodine and -bromine compounds are compiled and interpreted. Structural features of characteristic perfluoroalkyl-, pentafluorophenyliodine(III and V), and few -bromine(III) compounds are presented and compared.     

Benziodoxole Triflate as a Versatile Reagent for Iodo(III)cyclization of Alkynes

The utility of benziodoxole triflate, derived from α,α‐bis(trifluoromethyl)‐2‐iodobenzyl alcohol, as a versatile reagent for iodo(III)cyclization via electrophilic activation of alkyne, is reported herein. The reagent promotes cyclization of alkynes tethered to a variety of nucleophilic moieties, affording benziodoxole‐appended (hetero)arenes such as benzofurans, benzothiophenes, isocoumarins, indoles, and polyaromatics under mild conditions. This unprecedented class of (hetero)aryl‐I^III compounds proved easy to purify, stable, and amenable to various synthetic transformations.     

Stabilization of Low‐Valent Iron(I) in a High‐Valent Vanadium(V) Oxide Cluster

Low‐valent iron centers are critical intermediates in chemical and bio‐chemical processes. Herein, we show the first example of a low‐valent Fe^I center stabilized in a high‐valent polyoxometalate framework. Electrochemical studies show that the Fe^III‐functionalized molecular vanadium(V) oxide (DMA)[Fe^IIIClV^V₁₂O₃₂Cl]³⁻ (DMA=dimethylammonium) features two well‐defined, reversible, iron‐based electrochemical reductions which cleanly yield the Fe^I species (DMA)[Fe^IClV^V₁₂O₃₂Cl]⁵⁻. Experimental and theoretical studies including electron paramagnetic resonance spectroscopy and density functional theory computations verify the formation of the Fe^I species. The study presents the first example for the seemingly paradoxical embedding of low‐valent metal species in high‐valent metal oxide anions and opens new avenues for reductive electron transfer catalysis by polyoxometalates.     

Iodonium Cation-Pool Electrolysis for the Three-Component Synthesis of 1,3-Oxazoles

The synthesis of 1,3-oxazoles from symmetrical and unsymmetrical alkynes was realized by an iodonium cation-pool electrolysis of I₂ in acetonitrile with a well-defined water content. Mechanistic investigations suggest that the alkyne reacts with the acetonitrile-stabilized I⁺ ions, followed by a Ritter-type reaction of the solvent to a nitrilium ion, which is then attacked by water. The ring closure to the 1,3-oxazoles released molecular iodine, which was visible by the naked eye. Also, some unsymmetrical internal alkynes were tested and a regioselective formation of a single isomer was determined by two-dimensional NMR experiments.     

Pyridine‐Enhanced Head‐to‐Tail Dimerization of Terminal Alkynes by a Rhodium–N‐Heterocyclic‐Carbene Catalyst

A general regioselective rhodium‐catalyzed head‐to‐tail dimerization of terminal alkynes is presented. The presence of a pyridine ligand (py) in a Rh–N‐heterocyclic‐carbene (NHC) catalytic system not only dramatically switches the chemoselectivity from alkyne cyclotrimerization to dimerization but also enhances the catalytic activity. Several intermediates have been detected in the catalytic process, including the π‐alkyne‐coordinated Rh^I species [RhCl(NHC)(η²‐HC?CCH₂Ph)(py)] ( 3 ) and [RhCl(NHC){η²‐C(tBu)?C(E)CH?CHtBu}(py)] ( 4 ) and the Rh^III–hydride–alkynyl species [RhClH{? C?CSi(Me)₃}(IPr)(py)₂] ( 5 ). Computational DFT studies reveal an operational mechanism consisting of sequential alkyne C? H oxidative addition, alkyne insertion, and reductive elimination. A 2,1‐hydrometalation of the alkyne is the more favorable pathway in accordance with a head‐to‐tail selectivity.     

Platin(0)‐Komplexe mit amino‐substituierten Alkinen: Neue Metallorganische Bausteine für supramolekulare Architekturen und „Kristall‐Engineering”︁

Platinum(0) Complexes with Amino‐Substituted Alkynes: Novel Organometallic Building Blocks for Supramolecular Architectures and “Crystal Engineering” Homoleptic Bis(alkyne)platinum(0) compounds containing either NH₂‐ or NH₂‐/OH‐substituents are formed by reaction of Pt(cod)₂ with alkynes as stable compounds. They can be used as variable building blocks for supramolecular networks. The crystal structure analyses of Bis(2‐amino‐2,5dimethyl‐5‐hydroxy‐hex‐3‐yne)platinum(0) ( 1 ) and of Bis(1(3‐amino‐3‐methyl‐but‐1‐inyl)‐cyclohexane‐1‐ol)platinum(0) ( 2 ) exhibit that the low‐valent Pt atom is tetrahedrally surrounded by the four sp‐hybridizated carbonatoms of the alkynes. Despite the fact that the bond lengths and ‐angles of the PtC₄ units are equal, the supramolecular structures are different. While in 1 polymer strands are formed in which the bis(alkyne)‐Pt⁰ units are connected by (OH)₂(NH₂)₂‐ tetrahedrons, 2 yields only a dimer containing a network of four OH‐ and two NH₂‐groups. Platinum(0) complexes with cationic alkynes bearing ammonium substituents can be isolated as thermal stable compounds. The X‐ray structures of [Cl( FH ⁺)Pt(cod)]₄ ( 8 ) reveals that four molecular units form a cube with both four NH₃⁺ groups and Cl^– at the corners connected by hydrogen bridges. In the bis(alkyne)Pt⁰ complex [Cl_1.5( FH ⁺)_1.5( F )_0.5Pt] ( 9 ) only 1,33 of two NH₂ groups are protonated and a hydrogen bridged network connects four bis(alkyne)Pt⁰ units (cod: cycloocta‐1.5‐diene, F : 1‐(trimethylsilylethinyl)‐1‐amino‐cyclohexane).     

Nickel(0)-induzierte CC-verknüpfung zwischen kohlendioxid und alkinen sowie alkenen

CO₂ and alkynes or alkenes undergo a 1/1 coupling in the presence of (Lig)Ni⁰ complexes to give five-membered cyclic nickela complexes of types V and XVII. The influence of temperature and of the ligands upon the regioselectivity of the CC coupling in the case of monosubstituted olefins is reported, and the significance of these ring systems in preparative chemistry is emphasized. Oxanickelacyclopentenones (V) react with alkynes to form oxanickelacycloheptadienones (XIII). The structure of one of the compounds of this class has been determined by X-ray crystallography. Special features of these novel compounds, which can be readily prepared from CO₂, are discussed together with the probable reaction mechanisms.     

Binukleare Nickel(0)-Alkin-Koordinationsverbindungen – Zusammenhang zwischen Ligandperipherie und supramolekularer Struktur

Binuclear Nickel(0) Alkyne Coordination Compounds – Correlation between Ligand Periphery and Supramolecular Structure Reaction of Ni(cdt: 1,5,9-cyclododecatriene) with functionalized alkynes and subsequent reaction with ethylenediamines gives binuclear compounds of the type (diamine)Ni(μ-alkyne)Ni(alkyne). Compounds with alkyne-diols (N?N)Ni₂(HOR¹R²C? C?C? CR¹R²OH)₂ show supramolecular structures in which two identical intramolecular and one intermolecular hydrogen bonds are realized. 1 and 2 (chelate ligand in each case N,N,N′,N′-tetramethylethylenediamine, TMEDA, in 1 R¹ = R² = Me, in 2 R¹ = R² = Et) polymer-like chains are built up by connecting the binuclear units. Via two intermolecular hydrogen bonds per organometallic unit in 1 and via one intermoleculare hydrogen bond in 2 the chains are connected to give double chains. By substitution of one methyl group of TMEDA by hydrogen ( 3 : R¹ = R² = Me) a polymerlike network is produced by connecting the polymer-like chains. In compound 4 in which one of the methyl groups of TMEDA is substituted by CH₂CH₂NMe₂ the polymer-like chains remain unconnected. In 5 (diamine = TMEDA, alkyne = (CH₃)₃C? C?C? CMe₂OH) one intermolecular hydrogen bond per organometallic unit is observed forming again polymer-like chains that are independent of each other.     

Homogeneous hydrogenation of alk-1-enes and alkynes catalyzed by the 1-[Ir(CO)(PhCN)(PPh3)]-7-C6H5-1,7-(σ-C2B10H10) complex

The complex [Ir(σ-carb)(CO)(PhCN)(PPh₃)], where carb = -7-C₆H₅-1,2C₂B₁₀H₁₀, was found to be an effective catalyst for homogeneous hydrogenation of terminal olefins and acetylenes at room temperature and atmospheric or subatmospheric hydrogen pressure. Internal olefins are not hydrogenated, but simple alk-1-enes are readily converted into the corresponding alkanes. Isomerization of the double bond catalyzed by the metal complex occurs at very small extent. Catalytic hydrogenation of olefins having carboxylate substituents on the unsaturated carbon atoms is prevented by the formation of thermally stable chelate hydridoalkyl complexes of the type I$\text{(H)}$(σ-CHRCHR′C(O)OR″) (σ-carb)(CO)(PPh₃)]. Acetylenes are hydrogenated to alkenes. The alk-1-enes formed in the hydrogenation of the alkynes HCCR in turn undergo the more slow reactions either of hydrogenation to alkanes or isomerization to internal olefins which cannot be further hydrogenated. Hydrogenation of alkynes of the type RCCR′ is stereospecifically cis, yielding cis- olefins. Catalyzed cis → trans isomerization reaction of these internal olefins occurs only to a negligeable extent.     

Synthesis of beta- and gamma-carbolines by the palladium-catalyzed iminoannulation of alkynes

A variety of substituted beta- and gamma-carbolines have been prepared in moderate to excellent yields by the palladium-catalyzed annulation of internal and terminal acetylenes by the tert-butylimines of N-substituted 3-iodoindole-2-carboxaldehydes and 2-haloindole-3-carboxaldehydes, respectively. This annulation chemistry is effective for a wide range of alkynes, including aryl-, alkyl-, hydroxymethyl-, ethoxycarbonyl-, and trimethylsilyl-substituted alkynes. When an unsymmetrical internal alkyne is employed, this method generally gives two regioisomers. When a terminal alkyne is employed, only one regioisomer has been isolated. This palladium-catalyzed annulation chemistry has also been successfully applied to the synthesis of two biologically interesting beta-carboline alkaloids, ZK93423 and abecarnil (ZK112119).     

Regiospecific and stereoselective synthesis of functionalized and differently metalated alkenes by silyl- or stannylcupration of metalated acetylenes

Differently metalated vinylcuprate intermediates resulting from silyl- or stannylcupration of silyl- and tin-containing acetylenes reacted with a range of electrophiles, including chlorosilanes and chlorostannanes, affording regio- and stereodefined differently metalated vic and gem silyl- and tin-trisubstituted alkenes. Some of these functionalized polymetalated olefins are interesting synthons in organic chemistry.     

Gold(I) and Gold(III) Trifluoromethyl Derivatives

Trifluoromethylation of AuCl₃ by using the Me₃SiCF₃/CsF system in THF and in the presence of [PPh₄]Br proceeds with partial reduction, yielding a mixture of [PPh₄][Au^I(CF₃)₂] ( 1′ ) and [PPh₄][Au^III(CF₃)₄] ( 2′ ) that can be adequately separated. An efficient method for the high‐yield synthesis of 1′ is also described. The molecular geometries of the homoleptic anions [Au^I(CF₃)₂]^? and [Au^III(CF₃)₄]^? in their salts 1′ and [NBu₄][Au^III(CF₃)₄] ( 2 ) have been established by X‐ray diffraction methods. Compound 1′ oxidatively adds halogens, X₂, furnishing [PPh₄][Au^III(CF₃)₂X₂] (X=Cl ( 3 ), Br ( 4 ), I ( 5 )), which are assigned a trans stereochemistry. Attempts to activate C? F bonds in the gold(III) derivative 2′ by reaction with Lewis acids under different conditions either failed or only gave complex mixtures. On the other hand, treatment of the gold(I) derivative 1′ with BF₃?OEt₂ under mild conditions cleanly afforded the carbonyl derivative [Au^I(CF₃)(CO)] ( 6 ), which can be isolated as an extremely moisture‐sensitive light yellow crystalline solid. In the solid state, each linear F₃C‐Au‐CO molecule weakly interacts with three symmetry‐related neighbors yielding an extended 3D network of aurophilic interactions (Au???Au=345.9(1) pm). The high $\tilde \nu $ _CO value (2194 cm^?1 in the solid state and 2180 cm^?1 in CH₂Cl₂ solution) denotes that CO is acting as a mainly σ‐donor ligand and confirms the role of the CF₃ group as an electron‐withdrawing ligand in organometallic chemistry. Compound 6 can be considered as a convenient synthon of the “Au^I(CF₃)” fragment, as it reacts with a number of neutral ligands L, giving rise to the corresponding [Au^I(CF₃)(L)] compounds (L=CNtBu ( 7 ), NCMe ( 8 ), py ( 9 ), tht ( 10 )).     

Disposable screen-printed ring disk carbon electrode coupled with wall-jet electrogenerated iodine for flow injection analysis of arsenic(III)

We report here a wall-jet electrogenerated iodine approach for sensitive detection of arsenite (As^III) by using a disposable screen-printed ring disk carbon electrode. Iodide (I⁻) is first oxidized to iodine (I₂) at the disk electrode; the electrogenerated I₂ can be effectively reduced back to I⁻ in the presence of As^III. The inhibited reduction current of I₂ to I⁻ can thus be monitored at the ring electrode and used for As^III analysis. Various factors influencing the flow injection analysis (FIA) of As^III were thoroughly investigated in this study. Under the optimized conditions, a linear calibration plot up to 10 μM with a detection limit (S/N = 3) of 70 nM was obtained by using 50 μM KI as the mobile phase in FIA. Practical utility of the proposed method was demonstrated to detect As^III in “Blackfoot” disease endemic village groundwater from southwestern coast area of Taiwan (Pei-Men).     

The Varied Frustrated Lewis Pair Reactivity of the Germylene Phosphaketene (CH{(CMe)(2,6-iPr2C6H3N)}2)GePCO

The germylene species (CH{(CMe)(2,6-iPr₂C₆H₃N)}₂)GePCO 1 is shown to react with the Lewis acids (E(C₆F₅)₃ E=B, Al). Nonetheless, 1 participates in FLP chemistry with electron deficient alkynes or olefins, acting as an intramolecular FLP. In contrast, in the presence of B(C₆F₅)₃ and an electron rich alkyne, 1 behaves as Ge-based nucleophile to effect intermolecular FLP addition to the alkyne. This reactivity demonstrates that the reaction pathway is controlled by the nature of the electrophile and nucleophile generated in solution, as revealed by extensive DFT calculations.     

Cationic Nonporous Macrocyclic Organic Compounds for Multimedia Iodine Capture

Over the past two decades, progress in chemistry has generated various types of porous materials for removing iodine (¹²⁹I or ¹³¹I) that can be formed during nuclear energy generation or nuclear waste storage. However, most studies for iodine capture are based on the weak host-guest interactions of the porous materials. Here, we present two cationic nonporous macrocyclic organic compounds, namely, MOC-1 and MOC-2 , in which 6I^- and 8I⁻ were as counter anions, for highly efficient iodine capture. MOC-1 and MOC-2 were formed by reacting 1,1′-diamino-4,4′-bipyridylium di-iodide with 1,2-diformylbenzene or 1,3-diformylbenzene, respectively. The presence of a large number of I⁻ anions results in high I₂ affinity with uptake capacities up to 2.15 g ⋅ g⁻¹ for MOC-1 and 2.25 g ⋅ g⁻¹ for MOC-2 .     

Cobalt‐Catalyzed Annulation of Salicylaldehydes and Alkynes to Form Chromones and 4‐Chromanones

A unique cobalt(I)–diphosphine catalytic system has been identified for the coupling of salicylaldehyde (SA) and an internal alkyne affording a dehydrogenative annulation product (chromone) or a reductive annulation product (4‐chromanone) depending on the alkyne substituents. Distinct from related rhodium(I)‐ and rhodium(III)‐catalyzed reactions of SA and alkynes, these annulation reactions feature aldehyde C?H oxidative addition of SA and subsequent hydrometalation of the C=O bond of another SA molecule as common key steps. The reductive annulation to 4‐chromanones also involves the action of Zn as a stoichiometric reductant. In addition to these mechanistic features, the Co^I catalysis described herein is complementary to the Rh^I‐ and Rh^III‐catalyzed reactions of SA and internal alkynes, particularly in the context of chromone synthesis.     

Zur Struktur zweier Isothiazolium‐Polyiodide (C19H16FeNS)I5 und (C15H12NS)2I8

On the Structure of Two Isothiazolium Polyiodides (C₁₉H₁₆FeNS)I₅ and (C₁₅H₁₂NS)₂I₈ By oxidation of 3‐phenylamino thiopropenones with iodine two isothiazolium polyiodides were obtained, whose structures have been determined by X‐ray structure analysis. 2‐Phenyl‐5‐ferrocenyl‐isothiazolium pentaiodide(C₁₉H₁₆FeNS)I₅ forms a layer structure with isothiazolium cations and polyiodide anions. The polyiodide layers contain pentaiodide ions I₅^–, triiodide ions I₃^– and iodine molecules I₂. Bis(2,5‐diphenyl‐isothiazolium) octaiodide (C₁₅H₁₂NS)₂I₈ also forms a layer structure with isothiazolium cations and polyiodide anions. The polyiodide layers are built up by octaiodide ions I₈^2–, pentaiodide ions I₅^– and triiodide ions I₃^–.