Dynamic Helicates Self-Assembly from Homo- and Heterotopic Dynamic Covalent Ligand Strands

The understanding and the application of reversible covalent reactions and coordination chemistry together with the proper design of the molecular frameworks, allow to achieve not only well-defined output architectures but also different grades of complex behavior. In this work, the dynamic nature of the helical systems offers an additional level of complexity by combining self-sorting on two levels: 1) the build-up of the ligand strand constituents from their components through dynamic covalent chemistry; 2) the assembly of the helicates from the ligands and the metal cations through dynamic metallo-supramolecular chemistry. The information encoded in the ligands constituent molecule was read differently (and accurately at the same time) by metal cations that varied in the coordination algorithms. It enabled the selective formation of a specific type of helicates from a wide library of helicates formed by the possible combination of subcomponents. Ligands containing dynamic tridentate and/or bidentate binding motifs in the same strand were studied to explore the helicates self-assembly with appropriate metal cations.     

Constitutional Dynamics of Metal–Organic Motifs on a Au(111) Surface

Constitutional dynamic chemistry (CDC), including both dynamic covalent chemistry and dynamic noncovalent chemistry, relies on reversible formation and breakage of bonds to achieve continuous changes in constitution by reorganization of components. In this regard, CDC is considered to be an efficient and appealing strategy for selective fabrication of surface nanostructures by virtue of dynamic diversity. Although constitutional dynamics of monolayered structures has been recently demonstrated at liquid/solid interfaces, most of molecular reorganization/reaction processes were thought to be irreversible under ultrahigh vacuum (UHV) conditions where CDC is therefore a challenge to be achieved. Here, we have successfully constructed a system that presents constitutional dynamics on a solid surface based on dynamic coordination chemistry, in which selective formation of metal–organic motifs is achieved under UHV conditions. The key to making this reversible switching successful is the molecule–substrate interaction as revealed by DFT calculations.     

Light‐Induced Reversible Reconfiguration of DNA‐Based Constitutional Dynamic Networks: Application to Switchable Catalysis

The light‐induced reversible and cyclic reconfiguration of constitutional dynamic networks, consisting of supramolecular nucleic acid structures as constituents and a photoisomerizable trans/cis‐azobenzene‐functionalized nucleic acid as the trigger is demonstrated. In addition, the cyclic photochemical reconfiguration of the constitutional dynamic networks guides the switchable on/off operation of an emerging hemin/G‐quadruplex DNAzyme.     

Dynamic reaction-induced phase separation in tunable,adaptive covalent networks

A series of catalyst-free, room temperature dynamic bonds derived from a reversible thia-Michael reaction are utilized to access mechanically robust dynamic covalent network films. The equilibrium of the thiol addition to benzalcyanoacetate-based Michael-acceptors can be directly tuned by controlling the electron-donating/withdrawing nature of the Michael-acceptor. By modulating the composition of different Michael-acceptors in a dynamic covalent network, a wide range of mechanical properties and thermal responses can be realized. Additionally, the reported systems phase-separate in a process, coined dynamic reaction-induced phase separation (DRIPS), that yields reconfigurable phase morphologies and reprogrammable shape-memory behaviour as highlighted by the heat-induced folding of a predetermined structure.

Dynamic covalent networks comprised of tunable thia-Michael bonds result in phase separated networks with tailorable mechanical and adaptive properties.     

Merging constitutional and motional covalent dynamics in reversible imine formation and exchange processes

The formation and exchange processes of imines of salicylaldehyde, pyridine-2-carboxaldehyde, and benzaldehyde have been studied, showing that the former has features of particular interest for dynamic covalent chemistry, displaying high efficiency and fast rates. The monoimines formed with aliphatic α,ω-diamines display an internal exchange process of self-transimination type, inducing a local motion of either "stepping-in-place" or "single-step" type by bond interchange, whose rate decreases rapidly with the distance of the terminal amino groups. Control of the speed of the process over a wide range may be achieved by substituents, solvent composition, and temperature. These monoimines also undergo intermolecular exchange, thus merging motional and constitutional covalent behavior within the same molecule. With polyamines, the monoimines formed execute internal motions that have been characterized by extensive one-dimensional, two-dimensional, and EXSY proton NMR studies. In particular, with linear polyamines, nondirectional displacement occurs by shifting of the aldehyde residue along the polyamine chain serving as molecular track. Imines thus behave as simple prototypes of systems displaying relative motions of molecular moieties, a subject of high current interest in the investigation of synthetic and biological molecular motors. The motional processes described are of dynamic covalent nature and take place without change in molecular constitution. They thus represent a category of dynamic covalent motions, resulting from reversible covalent bond formation and dissociation. They extend dynamic covalent chemistry into the area of molecular motions. A major further step will be to achieve control of directionality. The results reported here for imines open wide perspectives, together with other chemical groups, for the implementation of such features in multifunctional molecules toward the design of molecular devices presenting a complex combination of motional and constitutional dynamic behaviors.     

Phase transfer of metal cations by induced dynamic carrier agents: biphasic extraction based on dynamic covalent chemistry

In contrast to the classical method where a single molecule is designed to extract metal cations under specific conditions, dynamic covalent chemistry provides an approach based on the implementation of an adaptive dynamic covalent library for inducing the generation of the extractant species. This approach has been applied to the liquid–liquid extraction of copper(ii) nitrate based on a dynamic library of acylhydrazones constituents that self-build and distribute through the interface of a biphasic system. The addition of copper(ii) cations to this library triggers a modification of its composition and the up-regulation of the ligand molecules driven by coordination to the metal cations. Among these, one species has proven to be sufficiently lipophilic to play the role of carrier agent and its formation by component exchange enables the partial extraction of the copper(ii). The study of different pathways to generate the dynamic covalent library demonstrates the complete reversibility and the adaptability of the system. The detailed analytical investigation of the system provides a means to assess the mechanism of the dynamic extraction process.

Phase transfer of Cu(ii) cations is achieved by component exchange in a dynamic covalent library of acylhydrazone ligands. B1/B2 component exchange leads to the generation of a lipophilic carrier agent that extracts Cu(ii) into chloroform.     

“Self-Lockable” Liquid Crystalline Diels–Alder Dynamic Network Actuators with Room Temperature Programmability and Solution Reprocessability

Novel main-chain liquid crystalline Diels—Alder dynamic networks (LCDANs) were prepared that exhibit unprecedented ease for actuator programming and reprocessing compared to existing liquid crystalline network (LCN) systems. Following cooling from 125 °C, LCDANs are deformed with aligned mesogens self-locked at room temperature by slowly formed Diels–Alder (DA) bonds, which allows for the formation of solid 3D actuators capable of reversible shape change, and strip walker and wheel-capable light-driven locomotion upon either thermally or optically induced order–disorder phase transition. Any actuator can readily be erased at 125 °C and reprogrammed into a new one under ambient conditions. Moreover, LCDANs can be processed directly from melt (for example, fiber drawing) and from solution (for example, casting tubular actuators), which cannot be achieved with LCNs using exchangeable covalent bonds. The combined attributes of LCDANs offer significant progress toward developing easily programmable/processable LCN actuators.     

Metal Ion-Driven Constitutional Adaptation in Dynamic Covalent C=C/C=N Organo-Metathesis

Knoevenagel barbiturate derivatives and imines are able to undergo efficient component recombination through dynamic covalent C=C/C=N organo-metathesis in absence of a catalyst. A [2×2] dynamic covalent library (DCL) containing two Knoevenagel derivatives Kn1 and Kn2 and two imines A1 and A2 has been established and its adaptive features in response to the addition of metal cations have been investigated. Addition of Cu(I) triflate as an effector, induces fast and remarkable constitutional selection of the DCL towards amplification of the Cu(I)- A2 complex and its agonist Kn1 . This adaptation process could be reversed by addition of neocuproine as a competitive Cu(I) ligand. Furthermore, separate addition of five other metal cations as input agents, i. e. Ag(I), Fe(II), Zn(II), Cu(II) and Li(I), led to the generation of cation-specific distribution patterns as outputs, showing the ability of the present DCL to recognize different effectors.     

Thermally Adjustable Dynamic Disulfide Linkages Mediated by Highly Air‐Stable 2,2,6,6‐Tetramethylpiperidine‐1‐sulfanyl (TEMPS) Radicals

Intrinsically exchangeable dynamic covalent bonds that can be triggered by readily usable stimuli offer easy incorporation of their dynamic properties in various molecular systems, but the library of such bonds is still being developed. Herein, we report the dynamic covalent chemistry of 2,2,6,6‐tetramethylpiperidine‐1‐sulfanyl (TEMPS) dimers derived from thermally reversible homolytic dissociation of disulfide linkages. High air stability of TEMPS was observed even at 100 °C, affording facile employment of thermal dissociation–association equilibria and adjustable bond exchange properties under atmospheric conditions. We also established an efficient synthetic route for a modifiable derivative of the dimer that enabled incorporation of dynamic properties into linear and network polymer structures. The obtained polymers showed controllable molecular weights, temperature‐dependent swelling properties, healing ability, and recyclability, reflecting the thermally tunable dynamics of the dimer.     

Driven evolution of a constitutional dynamic library of molecular helices toward the selective generation of [2 x 2] gridlike arrays under the pressure of metal ion coordination

Constitutional dynamics, self-assembly, and helical-folding control are brought together in the efficient Sc(OTf)3/microwave-catalyzed transimination of helical oligohydrazone strands, yielding highly diverse dynamic libraries of interconverting constituents through assembly, dissociation, and exchange of components. The transimination-type mechanism of the ScIII-promoted exchange, as well as its regioselectivity, occurring only at the extremities of the helical strands, allow one to perform directional terminal polymerization/depolymerization processes when starting with dissymmetric strands. A particular library is subsequently brought to express quantitatively [2 x 2] gridlike metallosupramolecular arrays in the presence of ZnII ions by component recombination generating the correct ligand from the dynamic set of interconverting strands. This behavior represents a process of driven evolution of a constitutional dynamic chemical system under the pressure (coordination interaction) of an external effector (metal ions).     

“Self‐Lockable” Liquid Crystalline Diels–Alder Dynamic Network Actuators with Room Temperature Programmability and Solution Reprocessability

Novel main‐chain liquid crystalline Diels—Alder dynamic networks (LCDANs) were prepared that exhibit unprecedented ease for actuator programming and reprocessing compared to existing liquid crystalline network (LCN) systems. Following cooling from 125 °C, LCDANs are deformed with aligned mesogens self‐locked at room temperature by slowly formed Diels–Alder (DA) bonds, which allows for the formation of solid 3D actuators capable of reversible shape change, and strip walker and wheel‐capable light‐driven locomotion upon either thermally or optically induced order–disorder phase transition. Any actuator can readily be erased at 125 °C and reprogrammed into a new one under ambient conditions. Moreover, LCDANs can be processed directly from melt (for example, fiber drawing) and from solution (for example, casting tubular actuators), which cannot be achieved with LCNs using exchangeable covalent bonds. The combined attributes of LCDANs offer significant progress toward developing easily programmable/processable LCN actuators.     

Self-sorting of two imine-based metal complexes: balancing kinetics and thermodynamics in constitutional dynamic networks

A major hurdle in the development of complex constitutional dynamic networks (CDNs) is the lack of strategies to simultaneously control the output of two (or more) interconnected dynamic processes over several species, namely reversible covalent imine bond formation and dynamic metal–ligand coordination. We have studied in detail the self-sorting process of 11 constitutional dynamic libraries containing two different amines, aldehydes and metal salts into two imine-based metal complexes, having no overlap in terms of their compositions. This study allowed us to determine the factors influencing the fidelity of this process (concentration, electronic and steric parameters of the organic components, and nature of the metal cations). In all 11 systems, the outcome of the process was primarily determined by the ability of the octahedral metal ion to select its pair of components from the initial pool of components, with the composition of the weaker tetrahedral complex being imposed by the components rejected by the octahedral metal ions. Different octahedral metal ions required different levels of precision in the “assembling instructions” provided by the organic components of the CDN to guide it towards a sorted output. The concentration of the reaction mixture, and the electronic and steric properties of the initial components of the library were all found to influence the lifetime of unwanted metastable intermediates formed during the assembling of the two complexes.

Constitutional dynamic networks have been developed to simultaneously control the output of two interconnected dynamic processes over several species of the same reaction mixture.     

Triple Self-Sorting in Constitutional Dynamic Networks: Parallel Generation of Imine-Based CuI,FeII, and ZnII Complexes

Three imine-based metal complexes, having no overlap in terms of their compositions, have been simultaneously generated from the self-sorting of a constitutional dynamic library (CDL) containing three amines, three aldehydes, and three metal salts. The hierarchical ordering of the stability of the three metal complexes assembled and the leveraging of the antagonistic and agonistic relationships existing between the constituents within the constitutional dynamic network corresponding to the CDL were pivotal in achieving the sorting. Examination of the process by NMR spectroscopy showed that the self-sorting of the Fe^II and Zn^II complexes depended on an interplay between the thermodynamic driving forces and a kinetic trap involved in their assembly. These results also exemplify the concept of “simplexity”—the fact that the output of a self-assembling system may be simplified by increasing its initial compositional complexity—as the two complexes could self-sort only in the presence of the third pair of organic components, those of the Cu^I complex.     

牛血清白蛋白手性毛细管整体柱的制备及对映体的分离

A silica-bonded bovine serum albumin (BSA) chiral monolithic stationary phase for capillary electrochromatography(CEC) was introduced. An inorganic-organic hybrid monolithic column was firstly prepared by sol-gel chemistry with homogeneously distributed aminopropyl groups throughout the silica matrix. Then the chiral stationary phase was synthesized by the in situ covalent immobilization of BSA on the monolithic column activated with glutaraldehyde. The effects of pH value and concentration of phosphate buffer on the separation of D,L-tryptophan were investigated. The separation factor of D,L-tryptophan reached 3.37 on CEC mode.     

Organocatalysis of CN/CN and CC/CN Exchange in Dynamic Covalent Chemistry

The reversibly formed C?N bond plays a very important role in dynamic covalent chemistry and the C?N/C?N exchange of components between different imine constituents to create dynamic covalent libraries has been extensively used. To facilitate diversity generation, we have investigated an organocatalyzed approach, using L ‐proline as catalyst, to accelerate the formation of dynamic libraries of [n×n] imine components. The organocatalysis methodology has also been extended, under somewhat modified conditions, to reversible C?C/C?N exchange processes between Knoevenagel derivatives of barbituric acid and imines, allowing for the generation of increased diversity.     

Reversible Thermal Switching of Aqueous Dispersibility of Multiwalled Carbon Nanotubes

Easily reversible aqueous dispersion/precipitation of multiwalled carbon nanotubes (MWNTs) has been demonstrated using small‐molecule non‐ionic pyrene‐based surfactants, which exhibit lower critical solution temperature (LCST) phase behaviour. The MWNTs are dispersed by means of non‐covalent interactions. The dispersibility can be switched “off” (i.e., MWNTs precipitated) upon heating and switched “on” (i.e., MWNTs re‐dispersed) upon cooling and merely swirling the sample at room temperature, that is, under very mild conditions. This effect is also observed under high ionic strength conditions with NaCl in the aqueous phase.     

Triple Self‐Sorting in Constitutional Dynamic Networks: Parallel Generation of Imine‐Based CuI,FeII, and ZnII Complexes

Three imine‐based metal complexes, having no overlap in terms of their compositions, have been simultaneously generated from the self‐sorting of a constitutional dynamic library (CDL) containing three amines, three aldehydes, and three metal salts. The hierarchical ordering of the stability of the three metal complexes assembled and the leveraging of the antagonistic and agonistic relationships existing between the constituents within the constitutional dynamic network corresponding to the CDL were pivotal in achieving the sorting. Examination of the process by NMR spectroscopy showed that the self‐sorting of the Fe^II and Zn^II complexes depended on an interplay between the thermodynamic driving forces and a kinetic trap involved in their assembly. These results also exemplify the concept of “simplexity”—the fact that the output of a self‐assembling system may be simplified by increasing its initial compositional complexity—as the two complexes could self‐sort only in the presence of the third pair of organic components, those of the Cu^I complex.     

Integrating replication-based selection strategies in dynamic covalent systems

In the past 15 years, the chemistry of reversible covalent bond formation (dynamic covalent chemistry (DCC)) has been exploited to engineer networks of interconverting compounds known as dynamic combinatorial libraries (DCLs). Classically, the distribution of library components is governed by their relative free energies, and so, processes that manipulate the free energy landscape of the DCL can influence the distribution of library members. Within the same time frame, the design and implementation of molecules capable of copying themselves--so-called replicators--has emerged from the field of template-directed synthesis. Harnessing the nonlinear kinetics inherent in replicator behavior offers an attractive strategy for amplification of a target structure within a DCL and, hence, engendering high levels of selectivity within that library. The instructional nature of replicating templates also renders the combination of replication and DCC a potential vehicle for developing complex reaction networks; a prerequisite for the development of the emerging field of systems chemistry. This Concept article explores the role of kinetically and thermodynamically controlled processes within different DCC frameworks. The effects of embedding a replicating system within these DCC frameworks is explored and the consequences of the different topologies of the reaction network for amplification and selectivity within DCLs is highlighted.     

Imine‐Based Architectures at Surfaces and Interfaces: From Self‐Assembly to Dynamic Covalent Chemistry in 2D

Within the last two decades, dynamic covalent chemistry (DCC) has emerged as an efficient and versatile strategy for the design and synthesis of complex molecular systems in solution. While early examples of supramolecularly assisted covalent synthesis at surfaces relied strongly on kinetically controlled reactions for post‐assembly covalent modification, the DCC method takes advantage of the reversible nature of bond formation and allows the generation of the new covalently bonded structures under thermodynamic control. These structurally complex architectures obtained by means of DCC protocols offer a wealth of solutions and opportunities in the generation of new complex materials that possess sophisticated properties. In this focus review we examine the formation of covalently bonded imine‐based discrete nanostructures as well as one‐dimensional (1D) polymers and two‐dimensional (2D) covalent organic frameworks (COFs) physisorbed on solid substrates under various experimental conditions, for example, under ultra‐high vacuum (UHV) or at the solid–liquid interface. Scanning tunneling microscopy (STM) was used to gain insight, with a sub‐nanometer resolution, into the structure and properties of those complex nanopatterns.     

Dynamic combinatorial libraries constructed on polymer scaffolds

Functionalized polymers were prepared by grafting acylhydrazides onto a polyvinylbenzaldehyde scaffold through reversible hydrazone linkages. The dynamic nature of these linkages allows the functionalized polymers to exchange and reshuffle their appendages, and the resultant mixture of polymers can be considered as a dynamic combinatorial library constructed upon a polymer scaffold. The dynamic nature of these functionalized polymers was demonstrated.