Synthesis, characterization, and surface properties of iron-doped boehmite nanofibers

Iron-doped boehmite nanofibers with varying iron contents have been prepared at low temperatures using hydrothermal treatment in the presence of poly(ethylene oxide) surfactant. The resulting nanofibers were characterized by transmission electron microscopy (TEM), X-ray diffraction, energy-dispersive X-ray analysis, and N2 adsorption. TEM images showed that the resulting nanostructures are predominantly nanofibers when the doped iron content is less than 5% (mol/mol); in contrast, nanosheets were formed when iron doping was above 4%. Nanotubes instead of nanofibers and iron-rich particles were observed in samples with 20% added iron. A detailed characterization and discussion on the iron-doped nanofibers is presented.     

Helical nanofibers of self-assembled bipolar phospholipids as template for gold nanoparticles

Bipolar phospholipids (bolalipids) represent an exciting class of amphiphilic molecules as they self-assemble in water to distinct structures of nanoscopic dimensions. Reported here are structural details of helical nanofibers, composed of achiral, symmetrical single-chain bolalipids with phosphocholine headgroups. These nanofibers are used as template for the fixation of gold nanoparticles (AuNPs) without prior functionalization. This realization of a metal array on bolalipid nanofibers is one of the rare examples of one-dimensional AuNP arrangements in solution. The loading and the heat of binding of AuNPs are determined applying transmission electron microscopy and isothermal titration calorimetry.     

静电纺丝法制备定向排列的铁氧体纳米纤维

以聚乙烯吡咯烷酮(PVP)和金属硝酸盐为原料,采用改进的静电纺丝法制备了直径均匀、表面光滑、定向排列的Co0.8Zn0.2Fe2O4/PVP纳米纤维前驱体,经热处理后得到定向排列的铁氧体纳米纤维.对前驱体纤维的热分解过程及Co0.8Zn0.2Fe2O4(CZFO)的结构、物相及形貌进行了表征.结果表明,在空气中经550～950℃热处理3 h后均得到纯相、结晶良好的尖晶石型钴锌铁氧体;在2000 r/min转速下收集的复合纤维形貌最佳,直径约300 nm;经750℃热处理后纤维直径约为70 nm,室温下测得饱和磁化强度为66.1 A.m2/kg,矫顽力达到最大值6.6 A/m,表明钴锌尖晶石型铁氧体单畴临界尺寸约为44 nm.与CoFe2O4相比,CZFO的饱和磁化强度升高,矫顽力下降,并且CZFO的纤维与粉末的磁特性有明显的区别.     

碳纤维表面原位SiC纳米纤维的合成与生长

基于化学气相反应法,以高纯Si和SiO₂为反应源材料,在碳纤维表面原位生长β-SiC纳米纤维。采用XRD、SEM和TEM 等分析测试手段对SiC纳米纤维进行了表征分析,研究了不同反应温度和时间对生成β-SiC纳米纤维微观形貌和结构的影响,并探讨了β-SiC纳米纤维的生长机制。研究结果表明：采取化学气相反应法能够制备高质量、高纯度的β-SiC纳米纤维,纳米纤维的直径约为100~300 nm。随着反应温度的提高和时间的延长,纳米纤维的产额增加,且微观组织形貌发生了变化。结合制备过程和纳米纤维微观结构的观察分析,表明气-固(VS)机制是SiC纳米纤维生长的主要机理。     

碳纤维表面原位SiC纳米纤维的合成与生长

基于化学气相反应法,以高纯Si和SiO₂为反应源材料,在碳纤维表面原位生长β-SiC纳米纤维。采用XRD、SEM和TEM 等分析测试手段对SiC纳米纤维进行了表征分析,研究了不同反应温度和时间对生成β-SiC纳米纤维微观形貌和结构的影响,并探讨了β-SiC纳米纤维的生长机制。研究结果表明：采取化学气相反应法能够制备高质量、高纯度的β-SiC纳米纤维,纳米纤维的直径约为100~300 nm。随着反应温度的提高和时间的延长,纳米纤维的产额增加,且微观组织形貌发生了变化。结合制备过程和纳米纤维微观结构的观察分析,表明气-固(VS)机制是SiC纳米纤维生长的主要机理。     

Core-sheath functional polymer nanofibers prepared by co-electrospinning

Core-sheath polymer nanofibers with optoelectronic materials as the sheath and easily spinnable polymer as the core were prepared by co-electrospinning. Three prototypical systems of polystyrene/poly(p-phenylene vinylene) (PS/PPV), poly(vinyl alcohol)/poly(p-phenylene vinylene) (PVA/PPV) and polystyrene/tris(8-quinolinolato) aluminum (PS/Alq₃) were investigated. The fluorescence microscopy images showed that the resulting nanofibers with uniform morphologies exhibited outstanding emission properties. The core-sheath structures of these nanofibers were observed by TEM investigation. The photoluminescence spectra indicated that the fluorescent properties of these functional core-sheath nanofibers could be influenced by the interaction between core and sheath materials.     

Large-scale synthesis of tungsten oxide nanofibers by electrospinning

We show in this communication that large-scale synthesis of orthorhombic WO3 nanofibers can be obtained via a simple electrospinning method. The morphology and the crystal structure are investigated by scanning electron microscopy (SEM), transmission electron microscopy (TEM), FTIR, X-ray diffraction patterns (XRD) and X-ray photoelectron spectra (XPS) spectra. SEM and TEM images showed that the diameter of the obtained WO3 nanofibers is between 100 and 500 nm. The structure of the obtained WO3 nanofibers was characterized by FTIR, XRD, and XPS spectra. The photoluminescence of the obtained WO3 nanofibers were also investigated.     

Electrospinning and characterization of medium-molecular-weight poly(vinyl alcohol)/high-molecular-weight poly(vinyl alcohol)/montmorillonite nanofibers

Submicron fibers of medium-molecular-weight poly(vinyl alcohol) (MMW-PVA), high-molecular-weight poly(vinyl alcohol) (HMW-PVA), and montmorillonite clay (MMT) in aqueous solutions were prepared by electrospinning technique. The effect of HMW-PVA and MMT on the morphology and mechanical properties of the MMW-PVA/HMW-PVA/MMT nanofibers were investigated for the first time. Scanning electron microscopy, viscometer, tensile strength testing machine, thermal gravimetric analyzer (TGA), and transmission electron microscopy (TEM) were utilized to characterize the PVA/MMT nanofibers morphology and properties. The MMW-PVA/HMW-PVA ratios and MMT concentration played important roles in nanofiber's properties. TEM data demonstrated that exfoliated MMT layers were well distributed within nanofibers. It was also found that the mechanical property and thermal stability were increased with HMW-PVA and MMT contents.     

SnO2/TiO2复合纳米纤维的制备及光催化性能

采用静电纺丝技术,以聚乙烯吡咯烷酮和钛酸正丁酯为前驱体,制得锐钛矿相TiO2纳米纤维。以TiO2纳米纤维为模板,通过水热合成法,制备了具有异质结构的SnO2/TiO2复合纳米纤维。利用扫描电镜(SEM)、X射线能量色散光谱（EDS）、透射电镜(TEM)和X射线衍射(XRD)等分析测试手段对其形貌和结构进行了表征,结果表明,SnO2纳米粒子均匀地生长在TiO2纳米纤维表面,形成了异质结构的SnO2/TiO2复合纳米纤维材料。通过改变反应物浓度,能有效地实现SnO2/TiO2复合纳米纤维的可控合成。以罗丹明B为模拟污染物,考察了SnO2/TiO2复合纳米纤维的光催化性能,与纯TiO2纳米纤维相比光催化活性明显提高,初步探讨了光催化反应机理。     

Ce掺杂In_2O_3纳米纤维的制备及其三乙胺气敏性能(英文)

用简单有效的静电纺丝法制备了Ce掺杂的In2O3纳米纤维材料.采用X射线衍射(XRD)、透射电子显微镜(TEM)、高分辨率透射电子显微镜(HRTEM)和扫描电子显微镜(SEM)对合成样品的晶体结构和形貌进行了表征.结果显示,此纤维材料的平均直径约为90nm,长度达到几十个微米.气敏性能测试结果表明,4%(w)Ce掺杂的In2O3纳米纤维对三乙胺的灵敏度最高,该气敏元件对3μL·L-1三乙胺的灵敏度达到2.6,响应时间为5s,恢复时间约为6s,且具有较好的选择性.     

Ag/ZnO纳米纤维的制备及光催化性能

采用静电纺丝技术及煅烧法制备了氧化锌纳米纤维, 然后采用水热法将银纳米颗粒负载到了氧化锌纳米纤维表面. 利用X射线衍射(XRD)、 X射线光电子能谱(XPS)、 能量色散X射线光谱(EDX)、 扫描电子显微镜(SEM)及透射电子显微镜(TEM)等技术对合成的Ag/ZnO纳米纤维的结构和组成进行了表征. SEM结果表明, 直径在5~100 nm之间的银纳米颗粒附着在直径在80~330 nm之间的氧化锌纤维表面形成了异质结构. 以常见的有机污染物甲基橙、 亚甲基蓝和罗丹明B等为降解底物, 对Ag/ZnO纳米纤维的光催化性能进行了表征. 结果表明, 负载银纳米颗粒后, 复合催化剂的光催化性能明显提高.     

FTIR study on the formation of TiO2 nanostructures in supercritical CO2

TiO(2) nanospherical and fibered structures were obtained via a one-step sol-gel method in supercritical carbon dioxide (scCO(2)) involving polycondensation of the alkoxide monomers titanium isopropoxide (TIP) and titanium butoxide (TBO) with acetic acid (HAc). The resulting materials were characterized by means of electron microscopy (SEM and TEM), X-ray diffraction (XRD), thermal analysis (TGA), and attenuated total reflection Fourier transmission infrared (ATR-FTIR) analysis. Depending on the experimental conditions, TiO(2) anatase nanospheres with a diameter of 20 nm or TiO(2) anatase/rutile nanofibers with a diameter of 10-100 nm were obtained. Fiber formation was enhanced by a higher HAc/Ti ratio and the use of the titanium isopropoxide (TIP) monomer. The mechanism of the microstructure formation was studied using in situ FTIR analysis in scCO(2). The FTIR results indicated that the formation of nanofibers was favored by a titanium hexamer that leads to one-dimensional condensation, while nanospheres were favored by a hexamer that permits three-dimensional condensation.     

p-CuO/n-In_2O_3异质结纳米纤维的制备及气敏特性

以电纺In_2O_3纳米纤维为模版,通过溶剂热法构建了p-CuO/n-In_2O_3异质结纳米纤维.采用扫描电子显微镜(SEM)、透射电子显微镜(TEM)、X射线衍射(XRD)和X射线光电子能谱(XPS)等方法对所得材料的形貌和结构进行表征.结果表明,CuO纳米颗粒可以均匀地负载在超细In_2O_3纳米纤维表面;随着反应液中乙酸铜浓度的增加,负载的CuO纳米颗粒密度也逐渐增加.通过制备旁热式气敏器件对复合纳米纤维材料的气敏特性进行了研究.结果表明,与纯In_2O_3纳米纤维相比,p-CuO/n-In_2O_3异质结纳米纤维对H_2S气体具有较高的灵敏度和较低的工作温度.     

Effect of pullulan/poly(vinyl alcohol) blend system on the montmorillonite structure with property characterization of electrospun pullulan/poly(vinyl alcohol)/montmorillonite nanofibers

Nanofibers of the composite of pullulan (PULL), poly(vinyl alcohol) (PVA), and montmorillonite clay (MMT) were prepared using electrospinning method in aqueous solutions. Pullulan is an interesting natural polymer for many of its merits and good properties. Because of biocompatibility and non-toxicity of PVA, it could be used in numerous fields. Scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared (FTIR), X-ray diffraction (XRD), and thermal gravimetric analysis (TGA) were done to characterize the PULL/PVA/MMT nanofibers morphology and properties. XRD patterns and FTIR data demonstrated that there were good interactions between PULL and PVA caused by possibly hydrogen bonds. Moreover, XRD data and TEM images indicated that intercalated and exfoliated MMT nanoplatelets can be obtained within the PULL/PVA/MMT nanofibers depending on the PULL/PVA blend ratios. Furthermore, the thermal stability and mechanical property (tensile strength) of PULL/PVA/MMT nanofibers could be enhanced more by exfoliated MMT nanoplatelets than intercalated structures of that nanoplatelets.     

Nanofibers of barium strontium titanate (BST) by sol-gel processing and electrospinning

This paper describes the fabrication of barium strontium titanate (Ba0.6Sr0.4TiO3 or BST) nanofibers by electrospinning method using a solution that contained poly(vinylpyrrolidone) and a sol-gel solution of BST. The as-spun and calcined BST/PVP composite nanofibers were characterized by TG-DTA, X-ray diffraction, FT-IR, SEM and TEM, respectively. After calcination of the as-spun BST/PVP composite nanofibers at above 700 degrees C in air for 2 h, BST nanofibers of 188+/-25 nm in diameter having well-developed cubic-perovskite structure were successfully obtained. The crystal structure and morphology of the nanofibers were influenced by the calcination temperature. Calcination at below 700 degrees C resulted in amorphous phase whereas BST with second phase such as barium titanate were formed at above 700 degrees C. Diameters of the nanofibers decreased from 208+/-35 to 161+/-18 nm with increasing calcination temperature between 600 and 800 degrees C.     

掺杂羧基化碳纳米管的纳米碳纤维前驱体的制备及表征

为获得结构完整、 性能优良的纳米碳纤维前驱体, 采用静电纺丝法制备了掺杂羧基化多壁碳纳米管(MWCNTs)的聚丙烯腈(PAN)纳米纤维. 用扫描电子显微镜、 偏振红外光谱、 透射电子显微镜、 拉曼光谱及拉伸性能测试等对杂化纳米纤维的微观结构和力学性能进行了研究, 分析了MWCNTs含量的影响. 实验结果表明, 5%(质量分数)的MWCNTs掺杂量为杂化纳米纤维直径的突变点, 且MWCNTs的加入有利于PAN分子链的取向, MWCNTs在PAN纤维中大体上沿纤维轴向取向分布. 3%MWCNTs/PAN杂化纳米纤维的拉伸强度和拉伸模量分别达到88.6 MPa和3.21 GPa.     

Preparation and Photocatalysis of Mesoporous TiO2 Nanofibers via an Electrospinning Technique

Mesoporous TiO₂ nanofibers have been synthesized by a new method that combines sol-gel chemistry and electrospinning technique. The obtained mesoporous TiO₂ nanofibers were characterized with scanning electron microscopy(SEM), X-ray diffraction(XRD), transmission electron microscopy(TEM) and nitrogen adsorption-desorption isotherms. The photocatalytic performance was evaluated by the photocatalytic degradation of Rhodamine B under UV light irradiation. The results show that mesoporous TiO₂ nanofibers exhibit higher photocatalytic activity compared with nonporous TiO₂ nanofibers.     

Synthesis of titanate, TiO2 (B), and anatase TiO2 nanofibers from natural rutile sand

Titanate nanofibers were synthesized by hydrothermal method (150 °C for 72 h) using natural rutile sand as the starting materials. TiO₂ (B) and anatase TiO₂ (high crystallinity) nanofibers with the diameters of 20-100 nm and the lengths of 10-100 μm were obtained by calcined titanate nanofibers for 4 h at 400 and 700 °C (in air), respectively. The samples characterized by XRD, SEM, TEM, SAED, HRTEM, and BET surface area. This synthesis method provides a simple route to fabricate one-dimensional nanostructured TiO₂ from low cost material.     

Isolation and characterization of stable nanofiber from turmeric spent using chemical treatment by acid hydrolysis and its potential as antimicrobial and antioxidant activities

Turmeric spent, a by-product of turmeric processing industries, was used as a source to prepare nanofibers (NF). The chemical treatments methods followed by acid hydrolysis accompanied with high pressure homogenization were used to prepare NF. The resulting turmeric nanofibers (TNF) were characterized by Fourier transform infrared spectroscopy (FT-IR), Raman spectroscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM), atomic force microscopy (AFM), X-ray diffraction (XRD) and thermogravimetric analysis (TGA/DTA). The TNF presented needle like structure, high thermal stability, an average width of 38.5?nm, average length of 245.7?nm, and giving an aspect ratio (L/D) of 23.15. The prepared TNF showed pronounced antimicrobial activity against Bacillus cereus, Escherichia Coli, Salmonella typhimurium and Staphylococcus aureus and also registered good antioxidant activity. The results showed that TNF were successfully obtained from turmeric spent and might be potentially applied in different fields, such as pharmaceutical, biological active species, nutraceuticals, components for food industries and bionanocomposites.     

Single-walled carbon nanotubes embedded in oriented polymeric nanofibers by electrospinning

The electrospinning process was used successfully to embed single-walled carbon nanotubes (SWCNTs) in a poly(ethylene oxide) (PEO) matrix, forming composite nanofibers. Initial dispersion of SWCNTs in water was achieved by the use of an amphiphilic alternating copolymer of styrene and sodium maleate. The resulting dispersions were stable, having a dark, smooth, ink-like appearance. For electrospinning, the dispersions were mixed with PEO solution in an ethanol/water mixture. The distribution and conformation of the nanotubes in the nanofibers were studied by transmission electron microscopy (TEM). Oxygen plasma etching was used to expose the nanotubes within the nanofibers to facilitate direct observation. Nanotube alignment within the nanofibers was shown to depend strongly on the quality of the initial dispersions. Well-dispersed and separated nanotubes were embedded in a straight and aligned form, while entangled nonseparated nanotubes were incorporated as dense aggregates. X-ray diffraction demonstrated a high degree of orientation of the PEO crystals in the electrospun nanofibers with embedded SWCNTs. This result is in pronounced distinction to the detrimental effect of incorporation of multiwalled carbon nanotubes on polymer orientation in electrospun nanofibers, as reported previously.