Determining Sodium Kryptate Adsorption Parameters on a Mercury Electrode in 1 M Na2SO4

The adsorption of a complex of sodium cations with a macrocyclic ligand (Kryptofix^R 222, composition C₁₈H₃₆N₂O₆) as a function of its concentration in 1 M Na₂SO₄ is studied by measuring the differential capacitance on a stationary Hg drop. Adsorption parameters of sodium kryptate are found using a regression analysis method and various versions of a model of two parallel capacitors complemented with the Frumkin adsorption isotherm. The differential capacitance curves, calculated on the basis of these, are compared with experimental data. The difference in model versions that most adequately describe the adsorption data, established for systems in 0.1 and 1 M Na₂SO₄, is explained by the influence of the supporting electrolyte on the adsorption layer structure. Conclusions are made on the absence in the system under study of the salting-out from the bulk solution and on a change in the properties of an adsorption layer of sodium kryptate in the region of potentials of the anodic adsorption–desorption peak following expansion of the adsorption region.     

阴离子特性吸附和Pt(111)电极表面结构对乙二醇解离吸附动力学的影响

运用电化学循环伏安和程序电位阶跃方法研究了阴离子特性吸附和Pt(111)电极表面结构对乙二醇解离吸附反应动力学的影响. 结果表明, 阴离子特性吸附显著影响乙二醇的解离吸附, 在高氯酸介质中(无特性吸附)测得乙二醇解离吸附反应的初始速率vi以及解离吸附物种(DA)的饱和覆盖度均明显大于硫酸溶液(发生SO2-4/HSO-4特性吸附)中的相应值; 其平均速率v随电极电位的变化呈类似火山型分布, 最大值位于0.22 V(vs SCE)附近. 还发现通过不同处理获得的Pt(111)电极的不同表面结构对这一表面过程也具有显著的影响.     

杯[6]冠醚接枝纤维素螯合树脂的合成及其吸附性能

四环氧丙基杯[6]-1,4-冠-4与纤维素多乙烯多胺衍生物反应,合成了一系列新型杯[6]冠醚纤维素螯合树脂。研究了其对阳离子吸附性能后发现该螯合树脂结合了纤维素和杯芳烃聚合物的各自优势,不仅具有较大的吸附容量,而且对Na^ 和Ag^ 有很好的吸附选择性。     

大孔吸附树脂的吸附机理

大孔吸附树脂(macroprous adsorption resin, MAR)是近几十年发展起来的一种具有多孔立体结构、人工合成的有机高分子聚合物。由于其特殊的理化性质和吸附性能,已被广泛应用于化学、医药、环保和食品等领域。本文介绍了近年来国内外对大孔吸附树脂在吸附机理研究方面的进展,重点介绍了不同温度条件下大孔吸附树脂对靶标分子的吸附热力学行为模式,靶标分子在大孔吸附树脂表面及孔内的吸附扩散行为模式。此外,大孔吸附树脂性能参数和靶标分子结构参数之间构效关系也对其吸附选择性规律具有重要的影响。因此,大孔吸附树脂与底物间构效关系的匹配程度及其对选择性的影响是大孔吸附树脂分离理论研究的核心。本文最后介绍了可以准确客观描述吸附过程并具有一定使用范围的大孔吸附树脂吸附模型的建立和评价。     

Kinetics of Adsorption of Neutral Molecules from a Thin Layer on a Rough Electrode

A theoretical model for the generalized finite adsorption impedance of a rough electrode is offered. A complex function of the roughness of the electrode surface is introduced and its frequency dependence is studied. The frequency characteristics of constituents of the adsorption impedance are shown to depend on the electrode roughness and the diffusion layer thickness. The frequency dependences of the phase angle and impedance components are found to considerably differ from the Frumkin–Melik-Gaikazyan result for an ideal smooth electrode.     

Correlation and Calculation of Multicomponent Adsorption Equilibria Data Using a Generalized Adsorption Isotherm

Enhanced by the need for reliable and accurate data of multicomponent gas adsorption equilibria on porous solids like activated carbons or zeolites, a new method to measure and correlate coadsorption equilibria has been developed. This method is a combination of gravimetric or volumetric measurements of the total load of pure or multicomponent adsorbates (Staudt, 1994; Gregg and Sing, 1982) and a correlation and calculation procedure using a new adsorption isotherm (AI) (Keller, 1990). This AI is thermodynamically consistent and describes adsorbates with fractal dimension for single- or multicomponent systems and load dependent adsorption energies. This method allows calculation of partial loads of multicomponent coadsorption equilibria from pure component data and the total loads of the mixture adsorption equilibria. This will be demonstrated for binary and ternary adsorption equilibria of CH₄, C₂H₄ and C₂H₆ on activated carbon (Reich et al., 1980).     

The Adsorption Effect of Quaternized Chitosan Derivatives on Bile Acid

Chitosan, which is easily derived from chitin by N-deacetylation. It is well known that hypercholesterolemia has been identified as a major risk factor in the development of atherosclerosis and its clinical sequelae like coronary heart disease and myocard…     

A Porous Polyaromatic Solid for Vapor Adsorption of Xylene with High Efficiency,Selectivity, and Reusability

Development of porous materials capable of capturing volatile organic compounds (VOCs), such as benzene and its derivatives, with high efficiency, selectivity, and reusability is highly demanded. Here we report unusual vapor adsorption behavior toward VOCs by a new porous solid, composed of a polyaromatic capsule bearing a spherical nanocavity with subnano-sized windows. Without prior crystallization and high-temperature vacuum drying, the porous polyaromatic solid exhibits the following five features: vapor adsorption of benzene over cyclohexane with 90 % selectivity, high affinity toward o-xylene over benzene and toluene with >80 % selectivity, ortho-selective adsorption ability (>50 %) from mixed xylene isomers, tight VOCs storage even under high temperature and vacuum conditions, and at least 5 times reusability for xylene adsorption. The observed adsorption abilities are accomplished at ambient temperature and pressure within 1 h, which has not been demonstrated by organic/inorganic porous materials reported previously.     

Adsorption of Carbon Dioxide on Activated Carbon

The adsorption of CO2 on a raw activated carbon A and three modified activated carbon samples B, C, and D at temperatures ranging from 303 to 333 K and the thermodynamics of adsorption have been investigated using a vacuum adsorption apparatus in order to obtain more information about the effect of CO2 on removal of organic sulfur-containing compounds in industrial gases. The active ingredients impregnated in the carbon samples show significant influence on the adsorption for CO2 and its volumes adsorbed on modified carbon samples B, C, and D are all larger than that on the raw carbon sample A. On the other hand, the physical parameters such as surface area, pore volume, and micropore volume of carbon samples show no influence on the adsorbed amount of CO2. The Dubinin-Radushkevich (D-R) equation was the best model for fitting the adsorption data on carbon samples A and B, while the Preundlich equation was the best fit for the adsorption on carbon samples C and D. The isosteric heats of adsorption on carbon samples A, B, C, and D derived from the adsorption isotherms using the Clapeyron equation decreased slightly increasing surface loading. The heat of adsorption lay between 10.5 and 28.4 kJ/mol, with the carbon sample D having the highest value at all surface coverages that were studied. The observed entropy change associated with the adsorption for the carbon samples A, B, and C (above the surface coverage of 7 ml/g) was lower than the theoretical value for mobile adsorption. However, it was higher than the theoretical value for mobile adsorption but lower than the theoretical value for localized adsorption for carbon sample D.     

溶液表面吸附实验的再讨论

In the solution adsorption experiment, different adsorption mode has been observed for aqueous ethanol and aqueous n-butanol, respectively. However, it is difficult to make an adjustment by the profiles of σ-c relationship. Choosing the experimental conditions improperly will give wrong results. Since there is no consistency between the Gibbs adsorption isotherm and Langmuir adsorption isotherm, the experimental data should not be fitted by using any algebraic equations or physical models. The data fitting for this experiment should be carried out according to the following steps:fitting the σ-lnc curve manually, making it monotonic and smooth; retrieving more data from this fitting curve, and re-plotting the σ-lnc curve; calculating the first derivatives at these data points (i.e., (∂σ/∂lnc)_T); calculating surface adsorptions by Gibbs adsorption isotherm, Γ=-(∂σ/∂lnc)_T/RT. As for the calculation of the cross-section area for the solute molecule, the effect of concentration of bulk solution (i.e., c) on the surface molecular density should be taken into account.     

固定化离子液体吸附黄酮类化合物性能研究

研究了吸附时间、固液比、样品浓度、上样流速对N-甲基咪唑键合硅胶固定化离子液体(SilprMim)吸附黄酮类化合物性能的影响.结果表明,受试化合物在30 min内均达到吸附平衡;吸附效率随固液比增大而增加,随样品浓度增大而降低;吸附等温线与拟合的Langmuir模型吻合良好.SilprMim对染料木素、木犀草素及槲皮素的饱和吸附量分别为47.7, 52.5和63.2 mg/g,上样流速在0.5～1.5 mL/min范围内吸附效率达90%以上;甲醇洗脱染料木素、木犀草素及槲皮素的解吸率分别为86.1%, 83.3%和84.6%;解吸顺序为:染料木素、木犀草素、槲皮素.SilprMim对3种受试黄酮类化合物具有较强吸附和分离能力,有望应用于黄酮类天然产物的分离纯化.     

烷基噻吩在MoS2团簇上吸附行为的密度泛函理论研究

运用密度泛函理论(DFT),采用Mo16S32团簇模型,在PW91/DNP水平上研究了噻吩(TP)及一系列烷基噻吩类硫化物如2-甲基噻吩(2-MT)、3-甲基噻吩(3-MT)、2,3-二甲基噻吩(2,3-DMT)、2,4-二甲基噻吩(2,4-DMT)、2,5-二甲基噻吩(2,5-DMT)及3,4-二甲基噻吩(3,4-DMT)等在加氢脱硫催化剂MoS2上的吸附行为.结果表明,在η1S吸附构型中,Mo16S32团簇对烷基噻吩吸附能力的顺序为2,5-DMT>2,4-DMT≈2,3-DMT>2-MT>3,4-DMT>3-MT>TP.通过键长、Mayer键级、Mulliken电荷分析可知,当噻吩环的2-或5-位不含甲基时,吸附能随硫原子电荷密度的增加而增大;2-或5-位含甲基时,甲基与团簇上相邻的Mo原子发生了弱的相互作用,使吸附能增大;虽然2,5-DMT的2-和5-位均含有甲基,但甲基离团簇上相邻的Mo较远,相互作用较小,吸附能较2,3-DMT和2,4-DMT增加的较少.文中还对各硫化物在MoS2催化剂上的加氢脱硫反应进行了讨论.     

Specific Features of the Adsorption of Carbon Monoxide on a Smooth Polycrystalline Platinum Electrode Modified with Adsorbed Silver Atoms

The adsorption of carbon monoxide at the surface of smooth polycrystalline platinum (smPt) is studied in conditions of a preliminary accumulation of various quantities of silver (θ_Ag) on the surface. A comparison with similar data obtained previously for Pt/Pt is conducted. It is discovered that on smPt, exactly as in the case of Pt/Pt, carbon monoxide undergoes adsorption at sites that are not occupied by adsorbed silver, without forcing the preliminarily adsorbed silver out. At small and intermediate Ag_ad, as opposed to Pt/Pt, a mere two peaks are observed in a voltametric curve in the region of electrodesorption of the mixed layer on smPt. It is shown that, in the region of potentials of the first peak, there occurs practically no transition of silver into solution in the course of oxidation of the mixed layer. Specific features that characterize the behavior of the CO_ads + Ag_ad mixed layer are discussed under the assumption about an “islet” character of the adsorption of silver.     

超高交联树脂对苯胺和对硝基苯胺的吸附行为

吸附热力学;化学吸附;超高交联树脂对苯胺和对硝基苯胺的吸附行为     

Hydrogen Evolution on a Mercury Electrode: The Effect of a Condensed Adsorption Layer

The electroreduction of hydrogen on a dropping mercury electrode with and without condensed adsorption layers (CAL) of organic compounds is studied by methods of classical polarography and laser photoemission. An analysis of effects CAL has on some reactions reveals that the CAL influence on the first-electron transfer and on reactions involving intermediates can retard or even completely block the process. The most profound changes occur in the processes that involve a proton donor. Possible reasons for different effects of CAL on the electron transfer processes are discussed.     

Adsorption kinetics and thermodynamics of acid dyes on a carboxymethylated chitosan-conjugated magnetic nano-adsorbent

The monodisperse chitosan-conjugated Fe(3)O(4) nanoparticles with a mean diameter of 13.5 nm were fabricated by the carboxymethylation of chitosan and its covalent binding onto Fe(3)O(4) nanoparticles via carbodiimide activation. The carboxymethylated chitosan (CMCH)-conjugated Fe(3)O(4) nanoparticles with about 4.92 wt.-% of CMCH had an isoelectric point of 5.95 and were shown to be quite efficient as anionic magnetic nano-adsorbent for the removal of acid dyes. Both the adsorption capacities of crocein orange G (AO12) and acid green 25 (AG25), as the model compounds, decreased with increasing pH, and the decreasing effect was more significant for AO12. On the contrary, the increase in the ionic strength decreased the adsorption capacity of AG25 but did not affect, obviously, the adsorption capacity of AO12. By the addition of NaCl and NaOH, both AO12 and AG25 could desorb and their different desorption behavior could be attributed to the combined effect of pH and ionic strength. From the adsorption kinetics and thermodynamics studies, it was found that both the adsorption processes of AO12 and AG25 obeyed the pseudo-second-order kinetic model, Langmuir isotherm, and might be surface reaction-controlled. Furthermore, the time required to reach the equilibrium for each one was significantly shorter than those using the micro-sized adsorbents due to the large available surface area. Also, based on the weight of chitosan, the maximum adsorption capacities were 1 883 and 1 471 mg x g(-1) for AO12 and AG25, respectively, much higher than the reported data. Thus, the anionic magnetic nano-adsorbent could not only be magnetically manipulated but also possessed the advantages of fast adsorption rate and high adsorption capacity. This could be useful in the fields of separation and magnetic carriers. [formula in text].     

尿嘧啶在银电极表面吸附状态的研究

综合分析了尿嘧啶在银电极表面不同条件的表面增强激光Ｒａｍａｎ光谱（ＳＥＲＳ）,利用扩展的Ｈüｃｋｅｌ分子轨道法（ＥＨＭＯ）对尿嘧啶分子在银电极表面的吸附状态进行了计算．结果表明：最稳定的吸附构型能较成功地阐明尿嘧啶吸附在银表面的ＳＥＲＳ谱;尿嘧啶在银表面主要是以Ｎ（３）去质子化的形式吸附;尿嘧啶在银表面的吸附取向是由其浓度和银表面电位共同决定;在较低浓度和较高电位时,Ｎ（３）去质子化的尿嘧啶离子在银表面主要是通过Ｃ（２）及整个嘧啶环上的π电子体系与银表面的相互作用平躺地吸附;在较高浓度和较低电位时,吸附取向发生改变,即主要是通过Ｎ（３）与Ｏ（１０）以及Ｎ（３）与Ｏ（８）垂直地共同吸附在银表面上     

金属-有机骨架材料中甲烷吸附机理的密度泛函理论研究

采用密度泛函理论研究了甲烷在MOF-5中的吸附位置、吸附构型和吸附能. 结果表明: 吸附位置主要有四种, Zn₄O簇为最佳吸附位, 其吸附能为17.38 kJ•mol^－1, 高于沸石中的甲烷吸附能. 从吸附能与MOF-5的结构关系分析得出: 在苯环中引入给电子基团, 有利于增强甲烷与MOFs的吸附作用; 引入含氧等极性官能团, 将增加甲烷吸附位, 有利于提高吸附储存量.     

Na2SeO3在Fe电极上还原和吸附机理

采用循环伏安法、恒电势电解法、恒电流阶跃法及交流阻抗法研究Na2SeO3提高锌锰合金电沉积电流效率的作用机理.证明在锌锰合金电沉积的条件下，Na2SeO3 阴极被还原为Se32－并吸附在阴极表面上，从而阻止了氢原子在阴极表面的吸附，因而减少了氢离子的阴极还原.拟定了Na2SeO3的反应和吸附机理，用交流阻抗法进一步证明了所拟机理的正确性.     

纳米Fe3O4@壳聚糖材料的制备及吸附性能的研究

以废弃的虾壳为原料制备壳聚糖,以壳聚糖为壳、磁性Fe_3O_4为核、液体石蜡为分散剂、T-80为乳化剂、戊二醛为交联剂制备了纳米Fe_3O_4@壳聚糖材料。利用扫描电镜、热重分析仪、红外光谱仪、X射线衍射仪对其进行了表征。结果显示,纳米Fe_3O_4@壳聚糖材料为表面光滑的球形结构,直径约75.82nm,壳聚糖和Fe_3O_4的质量比为2∶1。吸附动力学实验研究表明,纳米Fe_3O_4@壳聚糖材料对Cu~(2+)吸附符合准二级动力学,以化学吸附为主,平衡吸附容量为17.32mg/g。吸附等温线实验研究表明,吸附符合Freundlic模型,纳米Fe_3O_4@壳聚糖材料与Cu~(2+)之间的交互作用强烈,最大吸附容量为213.68mg/g。