Bending of an elastoplastic strip with isotropic and kinematic hardening

Summary  We propose an exact analysis for finite bending of a compressible elastoplastic strip with combined hardening at a given stretch normal to the bending plane. We apply the self-consistent eulerian rate-type elastoplastic model based on the logarithmic rate, in conjunction with a Tresca-type loading function. Utilizing the maximum circumferential stretch at the outer surface as an independent parameter, we derive exact analytic expressions for the bending angle, the bending moment, the outer and inner radii, the radii of the two elastic-plastic interfaces and the circumferential stretches at these two interfaces, as well as the stress distributions in every current cross section. In particular, we establish an explicit relation between the two circumferential stretches at the two elastic-plastic interfaces, and we show that this relation is universal for all cases of hardening. We show also that the maximum and minimum circumferential stretches at the outer and inner surfaces obey a reciprocal relation in the course of both elastic and elastic-plastic deformations. Received 4 June 2002; accepted for publication 14 November 2002 This research was carried out under financial support from the German Science Foundation (DFG) (Contract No.: Br. 580/26-2) and from Alexander von Humboldt Foundation. We wish to express our sincere gratitude to these Foundations.     

An inelastic material model for filled polytetrafluorethylen

Summary  This paper presents a viscoplastic model for PTFE designed to simulate numerically PTFE shaft seals. A rate-independent elastoplastic model with an endochronic flow rule is coupled in series with a rate-dependent Kelvin model, which has a highly nonlinear damper. In contrast to previous models for PTFE, this unified approach is suitable for numerical simulation of the loading and the stress relaxation behaviour at ambient temperature. Received 30 October 2001; accepted for publication 21 January 2002     

The implicit standard material theory for modelling the nonassociative behaviour of metals

Summary  Modelling the elastoplastic or elastoviscoplastic behaviour of metallic materials exhibiting strain hardening and damage leads to complex nonassociative constitutive equations, sources of many theoretical and numerical troubles. The usual modelling of a nonassociative constitutive equation leads to the loss of the interesting and very useful properties of generalised standard materials deriving from the key concepts of convexity and normality. The argument that will be developed is that the bipotential concept is an appropriate answer. In the first part, after introducing the state variables generally used to describe the behaviour of metallic materials, the constitutive equations subjected to the principles of thermodynamics are derived from two potentials. The state potential gives the state laws, and the bipotential of dissipation delivers the evolution laws for state variables, through the implicit normality assumption. The second part is devoted to several particular applications to metal elastoplasticity and elastoviscoplasticity models. Received 29 March 2000; accepted for publication 26 September 2000     

Griffith crack moving in a piezoelectric strip

Summary  The dynamic problem of an impermeable crack of constant length 2a propagating along a piezoelectric ceramic strip is considered under the action of uniform anti-plane shear stress and uniform electric field. The integral transform technique is employed to reduce the mixed-boundary-value problem to a singular integral equation. For the case of a crack moving in the mid-plane, explicit analytic expressions for the electroelastic field and the field intensity factors are obtained, while for an eccentric crack moving along a piezoelectric strip, numerical results are determined via the Lobatto–Chebyshev collocation method for solving a resulting singular integral equation. The results reveal that the electric-displacement intensity factor is independent of the crack velocity, while other field intensity factors depend on the crack velocity when referred to the moving coordinate system. If the crack velocity vanishes, the present results reduce to those for a stationary crack in a piezoelectric strip. In contrast to the results for a stationary crack, applied stress gives rise to a singular electric field and applied electric field results in a singular stress for a moving crack in a piezoelectric strip. Received 14 August 2001; accepted for publication 24 September 2002 The author is indebted to the AAM Reviewers for their helpful suggestions for improving this paper. The work was supported by the National Natural Science Foundation of China under Grant 70272043.     

Moving eccentric crack in a piezoelectric strip bonded to elastic materials

Summary  The steady-state of a propagation eccentric crack in a piezoelectric ceramic strip bonded between two elastic materials under combined anti-plane mechanical shear and in-plane electrical loadings is considered in this paper. The analysis based on the integral transform approach is conducted on the permeable crack condition. Field intensity factors and energy release rate are obtained in terms of a Fredholm integral equation of the second kind. It is shown for this geometry that the crack propagation speed has influence on the dynamic energy release rate. The initial crack branching angle for a PZT-5H piezoceramic structure is predicted by the maximum energy release rate criterion. Received 23 January 2001; accepted for publication 18 October 2001     

Finite viscoplasticity of semicrystalline polymers

Summary  A series of uniaxial tensile tests is performed on isotactic polypropylene at room temperature with cross-head speeds ranging from 5 to 100 mm/min. Prior to mechanical testing, injection-molded samples are annealed for 24 h at the temperature 160 ^°C that ensures that the specimens can be drawn up to the Hencky strain of 0.6 without necking. A constitutive model is derived for the viscoplastic behavior of a semicrystalline polymer at finite strains. The stress–strain relations are determined by five adjustable parameters that are found by matching the observations. Fair agreement is demonstrated between the experimental data and the results of numerical simulation. It is shown that the material parameters in the constitutive equations are strongly affected by the strain rate. Received 9 July 2002; accepted for publication 12 November 2002     

A semi-infinite interfacial crack between two bonded dissimilar elastic strips

Summary  This paper is concerned with a semi-infinite interfacial crack between two bonded dissimilar elastic strips with equal thickness. Solutions for the complex stress intensity factor (SIF) and energy release rate (ERR) are obtained in closed form under in-plane deformations. During the procedure, the mixed boundary-value problem is reduced by means of the conformal mapping technique to the standard Riemann–Hilbert problem. In some limiting cases, the present solutions can cover the results found in literature. Received 21 February 2002; accepted for publication 2 July 2002 X.-F Wu's work was supported in part by the Milton E. Mohr Research Fellowship (2001, 2002) of the Engineering College at University of Nebraska-Lincoln.     

Comparative study of an interface crack for different wedge-interface models

Summary  An interface crack problem is investigated under various assumptions on an interface between two elastic materials. The interface is modeled by an additional third structure (thin elastic wedge of differing elastic properties) matching the bonded materials, or by introducing special boundary conditions on the crack line ahead. The main emphasis of the paper is placed on a comparison of the asymptotic expansion of the elastic solutions near the crack tip obtained for the different models. In particular, the behaviour of the stress singularity exponent and the generalized SIF are discussed. Numerical examples are presented. Received 16 August 2000; accepted for publication 26 May 2001     

Generalized thermoelastic analysis of the stress-focusing effect in a solid cylinder under rotationally asymmetrical instantaneous thermal loading

Summary  This paper investigates the stress-focusing effect in an infinitely long cylinder under rotationally asymmetrical instantaneous thermal loading on the basis of the generalized thermoelastic Lord–Shulman (L-S) and Green–Lindsay (G-L) theories. Combined forms of the governing equations of both theories are given in a cylindrical coordinate system. The two-dimensional generalized thermoelastic problems are solved by numerical inversion of Laplace transform. Calculations have been performed to find distributions of thermal stresses on the basis of the L-S theory. Stress-focusing phenomena under different heating conditions are presented. The effects of thermomechanical coupling and relaxation time on the stress-focusing phenomena as well as the singularity of stresses are discussed. Received 15 November 2000; accepted for publication 15 November 2001     

Impact response of an interface crack in a hybrid piezoelectric laminate

Summary  In a hybrid laminate containing an interfacial crack between piezoelectric and orthotropic layers, the dynamic field intensity factors and energy release rates are obtained for electro-mechanical impact loading. The analysis is performed within the framework of linear piezoelectricity. By using integral transform techniques, the problem is reduced to the solution of a Fredholm integral equation of the second kind, which is obtained from one pair of dual integral equations. Numerical results for the dynamic stress intensity factor show the influence of the geometry and electric field. Received 29 June 2001; accepted for publication 3 December 2001     

Modelling of a resonant inertial oscillation within a torus

Summary  We consider the air contained in a pneumatic tyre with the purpose of investigating its inertial oscillations. We model the tyre as a torus limited by a membrane in contact with the ground. According to this model, we prove that the flow within this torus may be considered as one at low Mach number and that it is ruled by oscillations of incompressible rotating fluid. Investigating such inertial oscillations, we show that the geostrophic oscillation is resonant, and we study the resonance phenomenon. Received 6 June 2000; accepted for publication 22 November 2000     

On the uniaxial compression behavior of regular shaped cellular metals

The numerical simulation of random cellular metals is still connected to many unsolved problems due to their stochastic structure. Therefore, a periodic model of a cellular metal is developed for fundamental studies of the mechanical behavior and is numerically investigated under uniaxial compression. The influence of differing hardening behaviors and differing boundary conditions on the characteristics of the material is investigated. Recommendations for the numerical simulation are derived. In contrast to common models, experimental samples of the same geometry are easy to manufacture and the results of the experiments show good agreement with the finite element calculations. Based on the proposed concept of a unit cell with periodic boundary conditions, it is possible to derive constitutive equations of cellular materials under complex loading conditions.     

Statistical aspects of the identification of material parameters for elasto-plastic models

Summary The presented method to identify material parameters for inelastic deformation laws is based on the numerical analysis of inhomogeneous stress and strain fields received from suitable experiments. Tensile and bending tests were carried out to obtain elastic and hardening parameters. The deformation law for small elasto-plastic strains is presented as a system of nonlinear differential and algebraic equations (DAE) consisting of the stress–strain relation, evolution equations for the internal variables and the yield condition. Different rules for the evolution equations of isotropic, kinematic and distorsional hardening are proposed. The DAE are discretized using an implicit Euler method, and the resulting system of nonlinear algebraic equations is solved using the Newton method. Deterministic optimization procedures are preferred to identify material parameters from a least-squares functional of numerical and measured comparative quantities. The gradient of the objective function was calculated using a semianalytical sensitivity analysis. Due to measurement errors, the optimal sets of material parameters are non unique. The approximate estimation of confidence regions and the calculation of correlation coefficients is presented. The results of several optimization processes for material parameters of elasto-plastic deformation laws show a good agreement between measured and calculated values, but they show also problems which may occur if systematic errors will not be recognized and deleted. Received 30 September 1999; accepted for publication 8 March 2000     

A classification of higher-order strain-gradient models – linear analysis

Summary  The use of higher-order strain-gradient models in mechanics is studied. First, existing second-gradient models from the literature are investigated analytically. In general, two classes of second-order strain-gradient models can be distinguished: one class of models has a direct link with the underlying microstructure, but reveals instability for deformation patterns of a relatively short wave length, while the other class of models does not have a direct link with the microstructure, but stability is unconditionally guaranteed. To combine the advantageous properties of the two classes of second-gradient models, a new, fourth-order strain-gradient model, which is unconditionally stable, is derived from a discrete microstructure. The fourth-gradient model and the second-gradient models are compared under static and dynamic loading conditions. A numerical approach is followed, whereby the element-free Galerkin method is used. For the second-gradient model that has been derived from the microstructure, it is found that the model becomes unstable for a limited number of wave lengths, while in dynamics, instabilities are encountered for all shorter wave lengths. Contrarily, the second-gradient model without a direct link to the microstructure behaves in a stable manner, although physically unrealistic results are obtained in dynamics. The fourth-gradient model, with a microstructural basis, gives stable and realistic results in statics as well as in dynamics. Received 13 June 2001; accepted for publication 6 November 2001     

The rule of affine similitude for the force coefficients of a body oscillating in a uniformly stratified fluid

 This paper presents a study on affine similitude for the force coefficients of an arbitrary body oscillating in a uniformly stratified fluid. A simple formula is derived that gives a relation between the force coefficients for a body oscillating in homogeneous and uniformly stratified ideal fluids. In particular, it implies the existence of a universal nondimensional similitude criterion for a family of affinely similar bodies, namely, the bodies that can be transformed into each other by vertical dilation of the initial coordinate system. Theoretical results are verified by experiments with a set of spheroids having different length-to-diameter ratios. The experimental technique for evaluation of the frequency-dependent force coefficients is based on Fourier analysis of the time-history of damped oscillation tests. Received: 25 September 2000 / Accepted: 6 July 2001 Published online: 29 November 2001     

M-integral analysis for microcrack-damaged anisotropic composite materials

Summary  This paper presents an M-integral analysis for the microcracked anisotropic composite materials. By using an elementary solution derived for a single finite crack subjected to a concentrated force on crack faces, the problem of strong interacting, arbitrarily oriented and located microcracks in an anisotropic composite materials is reduced to a system of Fredholm integral equations. The crack-tip fracture parameters, such as the stress intensity factors, are evaluated from a numerical solution of the system of integral equations. Its dependence on the coordinate system, calculation, and physical interpretation of the M-integral are discussed in the interaction problem. Finally, a numerical example of the damage evaluation by the M-integral analysis is given. Received 24 September 1999; accepted for publication 8 February 2000     

On the modeling and design of piezocomposites with prescribed properties

Summary  Piezoelectric transversely isotropic matrix containing spheroidal piezoelectric inclusions with different properties and of, generally, diverse aspect ratios is considered. A full set of ten effective electrostatic constants is derived, using the method of effective field. The case, when the inclusions are circular cylinders (fibers) is analyzed in detail. The results are compared with those of several earlier works. They constitute the theoretical framework for the design of piezocomposites with prescribed overall properties. Received 3 May 2001; accepted for publication 26 June 2001     

Electro-mechanical analysis of an interfacial crack between a piezoelectric and two orthotropic layers

Summary  The problem of an interfacially cracked three-layered structure constructed of a piezoelectric and two orthotropic materials is analyzed using the theory of linear piezoelectricity and fracture mechanics. Anti-plane shear loading is considered, and the integral transform technique is used to determine the stress intensity factor. Numerical examples show the electro-mechanical effects of various material combinations and layer thicknesses on the stress intensity factor. Interesting results are obtained in comparison with earlier solutions for interfacially cracked piezoelectric structures. Received 29 December 2000; accepted for publication 3 May 2001     

Influence of unsteady wake on a turbulent separation bubble

 An experimental study was made of turbulent separated and reattaching flow over a blunt body, where unsteady wake was generated by a spoked-wheel type of wake generator with cylindrical rods. The influence of unsteady wake was scrutinized by altering the rotation direction (clockwise and counter-clockwise) and the normalized passing frequency (0 ≤ St _H  ≤ 0.20). The Reynolds number based on the cylindrical rod was Re _d =375. A phase-averaging technique was employed to characterize the unsteady wake. The effect of different rotation directions, which gave a significant reduction of x _R , was examined in detail. The wall pressure fluctuations on the blunt body were analyzed in terms of the spectrum and the coherence. Received: 15 January 2001 / Accepted: 17 July 2001     

The contact problem of a rubber half-space dented by a rigid cone apex

Summary  The smooth contact of a rubber half-space dented by a rigid cone apex is analyzed based on the large deformation theory. The problem is treated as an axially symmetric case, and the material is assumed to be incompressible. The asymptotic equations for the domain near the apex are derived. They are solved analytically for the shrinking domain, while a numerical solution is found for the expanding domain in the vicinity of the stress singularity. The purpose of this paper is not only to solve a typical problem but also to provide an analytical method to solve a large-strain problem with a singular point. Received 10 July 2001; accepted for publication 24 January 2002