Analytical applications of crown ethers : IV. Extraction and determination of gold

A method for determination of gold at low concentrations by flame and nonflame AAS is described. After the pretreatment and decomposition of the samples gold is extracted with MIBK containing dicyclohexyl-18-crown-6. The extract is aspirated into a flame or injected into a graphite furnace. Various interferences are examined and the precision of the method is evaluated.     

Analytical applications of crown ethers : I. Oxidation and determination of benzaldehyde

The use of dicyclohexyl-18-crown-6 (DCC) as charge transfer reagent for the oxidation of benzaldehyde in organic solvents by aqueous solution of potassium permanganate is presented. The oxidation in the presence of a catalyst is found to be quantitative and suitable for the determination of benzaldehyde. Results for the determination of benzaldehyde in benzene and cyclohexane are given.     

Analytical applications of crown ethers: II. Oxidation and determination of aldehydes

The oxidation of aldehydes by dicyclohexyl-18-crown-6-potassium permangante complex is presented. Results obtained by this procedure showed that the presence of crown ether (DCC) and the catalyst play an important role in the oxidation of the aldehydes. The stoichiometry found corresponds to 2 μeq of permanganate per 1 μmol of aldehydes in all cases. Alcohols and ketones are not oxidized. Finally, a method for quantitative evaluation of aldehydes is proposed.     

Analytical applications of picolinealdehyde salicyloylhydrazone: III. Extraction and determination of zinc by atomic absorption spectrophotometry

A rapid sensitive atomic absorption spectrophotometric method for the determination of trace amounts of zinc(II) is presented. The technique is based on the ability of picolinealdehyde salicyloylhydrazone (SHPA) to form stable neutral bis complex with zinc. This complex is quantitatively extractable into MIBK. Thus, the determination of zinc is free of interfering effects and easily estimated by a.a.s. The method has been applied to the determination of traces of zinc in inorganic salts, milk, and sea water. Recovery tests show the precision of the method.     

Extraction of technetium by crown ethers and cryptands

Extraction of technetium with dibenzo-18-crown-6 was studied from alkline media. Effects of crown cavity size, substitutions, organic solvents and type of base on the distribution coefficient were discussed. High separation factors of technetium from other elements in an irradiated uranium sample were attained.     

Polycarboxylate crown ethers: Synthesis,complexation, applications

Crown ethers derived from tartaric acid present a number of interesting features as receptor frameworks and offer a possibility of enhanced metal cation binding due to favorable electrostatic interactions. The synthesis of polycarboxylate crown ethers from tartaric acid is achieved by simple Williamson ether synthesis using thallous ethoxide or sodium hydride as base. Stability constants for the complexation of alkali metal and alkaline earth cations were determined by potentiometric titration. Complexation is dominated by electrostatic interactions but cooperative coordination of the cation by both the crown ether and a carboxylate group is essential to complex stability. Complexes are stable to pH 3 and the ligands can be used as simultaneous proton and metal ion buffers. The low extractibility of the complexes was applied in a membrane transport system which is a formal model of primary active transport.     

The separation and determination of nitrophenol isomers by high-performance capillary zone electrophoresis

o-Nitrophenol, m-nitrophenol, and p-nitrophenol could well be separated by capillary zone electrophoresis (CZE) by only adjusting the run buffer with methanol. Efficiency up to 10⁵ theoretical plates per meter was achieved. The effects of several important factors were investigated to find optimum conditions. The linear range, regression equation, and the recovery were given. This method possessed the advantages of simplicity, rapidity, and good reproducibility; it can be developed for the separation of practical samples in environment analysis.     

Extraction and determination of crown ethers from water samples using a membrane disk and gas chromatography

A method for rapid extraction and determination of some crown ethers in aqueous matrices using octadecyl-bonded silica membrane disks and gas chromatography is presented. Extraction efficiency and the influence of vacuum pressure. pH, and type and least amount of eluting solvent used to extract the crown ethers from the membrane disks were evaluated. Extraction efficiencies > 95% were obtained for benzo-15-crown-5, benzo-18-crown-6 and dicyclohexyl-18-crown-6 using 5 ml of acetonitrile as eluting solvent. The limit of detection of the proposed method for the determination of the crown ethers is reported.     

Analytical applications of picolinealdehyde salicyloylhydrazone: II. Extraction and spectrophotometric determination of vanadium(V)

Picolinealdehyde salicyloylhydrazone reacts with vanadium(V) to produce a yellow 1:1 complex (λ_max = 400 nm, ? = 2.17 × 10⁴ liters · mol^?1 cm^?1) in aqueous ethanolic solution. The yellow complex can be extracted into chlorobenzene (λ_max = 425 nm, ? = 2.16 × 10⁴ liters · mol^?1 cm^?1) and used for the spectrophotometric determination of trace amounts of vanadium. Interferences have been investigated. The method has been applied to the determination of vanadium in steel and in lead concentrates.     

The GC separation of C2-naphthalene isomers using cyclodextrins and crown ethers

Summary The twelve structural C₂ isomers of naphthalene are resolved on a single capillary column using , , or cyclodextrin as the stationary phase. A change in elution order is seen upon going from to and then cyclodextrin which can be related to the size of the cyclodextrin cavity and the stereochemical fit of the isomer. A crown-ether column and a liquid-crystal column were found to be unable to separate all of the isomers.     

Extraction of several lanthanide and actinide radionuclides with crown ethers

The solvent extraction of several lanthanide radionuclides (¹⁴⁴Ce,¹⁴⁷Nd,¹⁵⁴Eu,¹⁷⁰Tm and¹⁶⁹Yb from aqueous picric acid solutions with (4-methylbenzo-15-crown-5) in chloroform has been investigated. The extracted species are found to be 1∶2∶3 (metal/crown/ picrate) complexes from slope analysis. The extraction equilibrium constants (K_ex) have been determined at 25 °C. The order of K_ex values for trivalent lanthanides is Nd³⁺> >Eu³⁺>Ce³⁺>Tm³⁺>Yb³⁺. This suggests that the ionic size of Nd³⁺ (r=0.995 Å) may be nearer to the cavity size of (4-methylbenzo-15-crown-5) than the other lanthanides. The extraction of thorium(IV) and uranium(IV, VI) by some crown ethers from nitric, hydrochloric and picric acid solutins have been studied. In nitric acid media, thorium(IV) forms a 1∶2 complex with DC18C6 or DC24C8, resembling plutonium(IV) and neptunium(IV) (identification of these reagents is given in Table 1 and Fig. 1). In hydrochloric acid media, the extraction of uranium(IV, VI) leads to a large loading and may be suitable for practical application. The far infrared spectra of the extracted complex in 1,2-dichloroethane have been examined for the UO₂Cl₂?DCI8C6, UO₂Cl₂?DC24C8, Th(NO₃)₄?DC18C6 and Th (NO₃)₄?DC24C8 systems. The spectra show the existence of direct bonding between the extracted metal ion and the oxygen donor in the ring of these crown ethers.     

Extraction of Eu(III) by dinonylnaphthalenesulfonic acid and synergistic effects of crown ethers and trioctylphosphine oxide

The extraction of Eu(III) by dinonylnaphthalenesulfonic acid (HDNNS) in benzene from nitrate and perchlorate solutions has been investigated. For nitrate solutions the ionic strength of the aqueous phase was kept constant at 0.1M using NaNO₃–HNO₃ mixtures. The Eu distribution was measured at different temperatures. The following stoichiometric formulae for the Eu species in benzene were derived: Eu(NO₃) (H_n–1 (DNNS)_n)₂ and Eu(H_n–1 (DNNS)_n)₃, from the nitrate and perchlorate medium respectively (n being a small number, e.g. 1, 2 or 3). The equilibrium constants were calculated and the thermodynamic parameters of the system were determined. When adding dibenzo-24-crown-8, dicyclohexyl-18-crown-6 or trioctylphosphine oxide, no synergism, but rather antagonism was observed.     

Periphery-modified crown ethers. Synthesis of bis-5,8-dimethoxy-1,4-methanonaphthalene-fused crown ethers

The easily accessible and multi-functionalized 5,8-dimethoxy-6,7-dihydroxy methyl-1,4-dihydro-1,4-methanonaphthalene (1) has been utilized as the basic building material to synthesize the symmetric bis-methanonaphthalene-fused crown ethers 14a-d (BMN-16-crown-4, BMN-22-crown-6, BMN-28-crown-8, and BMN-34-crown-10), that are constructed based on the connection between the α,β-bis-benzylic carbon atoms of diol 1 and oligoethylene glycols (9a-d) via two synthetic routes keyed upon the method of Williamson ether synthesis.     

Synthesis of novel crown ethers. Part 1. Coumestan and coumestan analog derivatives of crown ethers

The presented ethylenedioxy compounds5a,5d,6a and6c are examples of novel cyclic ethers, while macrocyclic polyethers represent new crown ether analogues. New coumestan-crowns5a-f, derivatives of 6,7-dihydroxy-3,4-dihydro-2H-dibenzofuran-1-one and 6,7-dihydroxy-3,3-dimethyl-3,4-dihydro-2H-dibenzofuran-1-one6a-e were synthesized from the correspondingo-dihydroxy compounds3a-b,4a-b and ditosylates or dichlorides of di- or triethylene glycol in the presence of K₂CO₃, in DMF/H₂O (15/1) solutions at 65–75 °C for 35 hours. The structure of the macrocyclic ethers obtained were confirmed by¹H-NMR,¹³C-NMR, IR spectra and elemental analyses.Presented at the Sixth International Seminar on Inclusion Compounds, Istanbul, Turkey, 27–31 August, 1995.     

Chemistry of crown ethers. Synthesis of new crown ethers containing a pyridazine ring

A method for preparation of crown ethers containing a pyridazine ring based on 1,2-dihydro-3,6-dioxopyridazine was developed.     

Extraction of technetium from ascorbic acid medium with crown ethers

The extraction of technetium from ascorbic acid medium with dibenzene-18-crown-6 /DB-18C6/ and 18-crown-6 /18C6/ dissolved in benzene and nitrobenzene was studied. The effect of crown ether substition, concentration of the extracting agent as well as the pH of the aqueous solution on the distribution coefficient was investigated. Nitrobenzene was found to be a rather promising diluent.     

Dibenzotetraaza crown ethers: a new family of crown ethers based on o-phenylenediamine

Dibenzotetraaza (DBTA) crown ethers possess two o-phenylenediamine moieties. They are homologues of dibenzo crown ether phase-transfer catalysts and were prepared from the condensation of benzimidazoles with oligo(ethyleneglycol) dichlorides and oligo(ethyleneglycol) ditosylates. Compounds with ring sizes ranging from 18-crown-6 to 42-crown-14 were prepared. In addition, various altered benzimidizoles were used to produce DBTA crown ethers with modified substituents and ether bridges, as well as benzimidazolidine crown ethers. The synthetic approach presented here proved to be a convenient route to a new family of crown ethers with overall yields of up to 48% based on the benzimidazole. Yields for the ring-closing step were generally high, ranging from 51% to 94%, without the need for high-dilution conditions. Reaction of the DBTA crown ethers with alkyl and benzyl halides was found to be a facile way to obtain the corresponding tetra(N-organyl) compounds. Picrate extraction studies were carried out to determine phase-transfer catalytic capabilities. Extraction efficiencies for alkali-metal ions were lower than those for dibenzo-18-crown-6. Efficiencies were higher for other metal ions, with some selectivity for Pb(2+). Tetra(N-methyl) DBTA-18-crown-6 generally exhibited higher extraction efficiencies than its N-H analogue, but the selectivity was lower.     

From crown ethers to zeolites: Reaction of EtAlCl2 with crown ethers

In contrast to aluminum alkyls, alkyl aluminum halides such as EtAlCl₂ react with crown ethers to form cation-anion pairs which exhibit the liquid clathrate effect. Specifically, [12-C-4·AlCl₂][AlCl₃Et] and [18-C-6·AlCl₂][AlCl₃Et] have been isolated and characterized by X-ray diffraction techniques. The cations show aluminum in an octahedral environment made up of four of the oxygen atoms from the crown and two chlorine atoms. The 12-C-4 derivative crystallizes in the monoclinic space group P2₁/c with cell constants of a=7.497(4), b=22.121(8), c=12.339(5) Å, =94.99(3)^o, and Z=4 for =1.43 g cm^–3. Least-squares refinement based on 1413 observed reflections led to a final conventional R value of 0.093. The 18-C-6 complex belongs to the triclinic space group P1 with a=8.414(4), b=12.193(6), c=12.394(6) Å, =73.14(4), =86.07(4), =81.52(4)^o, and Z=2 for =1.45 g cm^–3. Refinement based on 2605 observed reflections led to R=0.063. The complex aluminum-containing species are related to a class of compounds called aluminoxanes.     

Voltammetric determination of lead at chemically modified electrodes based on crown ethers.

The feasibility of fabricating lead-sensitive chemically modified electrodes (CMEs) for trace analysis in aqueous and 40% (v/v) ethanol-water media was investigated. Carbon paste electrodes modified with crown ethers were constructed by mixing the crown ethers into a graphite powder-paraffin oil matrix. The thus-formed electrodes were able to bind Pb(II) ions chemically, and gave better voltammetric responses than unmodified ones. The crown ethers studied and compared were 18-crown-6 and dibenzo-18-crown-6. With a 5% 18-crown-6 CME, Pb(II) could be quantified at sub-ppm levels by differential pulse voltammetry with a detection limit of 0.02 ppm. It was possible to selectively pick up Pb(II) from a solution of several other ions at an open circuit through complexation. A simultaneous analysis of Cu(II) and Pb(II) was also attempted. By differential pulse anodic stripping voltammetry Pb(II) could be quantified over the range of 1 to 100 ppb. Interference from metal ions like Ni(II), Co(II), Mn(II), Zn(II), Cd(II), Ag(I), Fe(III), Ca(II) and Mg(II) was also studied. The method was successfully applied to artificial as well as commercial samples of alcoholic beverages.