Spectroscopic properties of Pr(3+) doped in tellurite glass

The absorption and fluorescence spectra of Pr(3+) doped in tellurite glass has been recorded and analyzed in terms of Judd-Ofelt theory. The lifetime of (3)P(0) and (3)P(1) levels has been measured. Fluorescence quenching has been observed for higher concentrations of Pr(3+) ion. The temperature dependence of the fluorescence intensity and the lifetime of the (3)P(0) level has been investigated and found that they decrease with the increase of the temperature.     

Enzyme electrode probes obtained by electropolymerization of monomers with PMS and selected dehydrogenase enzymes

5-methylphenazonium methylsulphate, (commonly named phenazine methosulphate, PMS) mediated electroxidation of beta-nicotinamide adenine dinucleotide (phosphate), reduced form, (NAD(P)h), on platinum, gold and carbon electrodes has been studied by electropolymerization of 1,2-, 1,3-, 1,4-diaminobenzene (DAB), pyrrole-2-carboxylic acid (PY-2-COOH) and 4,4'-dihydroxybenzophenone (DHB) in presence of PMS using cyclic voltammetry. The electroxidation of ascorbic acid has been evaluated on the electrodes electropolymerized in absence and in presence of PMS. The same experiments have been carried out with NAD(P)H in solution. Results showed that the NAD(P)H is oxidised by PMS coimmobilized with the polymer film on the electrode surface. NAD(P)H has been measured in the range 10(-6)-10(-2)mol l(-1) with a detection limit of 5 x 10(-7) mol 1(-1). Amperometric measurements of NAD(P)H have been carried out at -0.10 V and the efficiency of different elecrodes based on different materials has been studied. The electropolymerization has been also carried out in presence of PMS and selected dehydrogenase enzymes. The activity of these enzymes has been tested amperometrically at -0.1 V. Enzyme substrates such as glucose, lactate and glutamate have been measured in the range 5 x 10(-6)-1 x 10(-2) mol 1(-1) with a detection limit 1 x 10(-6) mol 1(-1). Also the stability of these probes during time has been evaluated.     

Cobalt(III) tetrabenzoporphyrin: Synthesis,spectral and coordination properties

Comparison of tetrabenzoporphyrin complexation reactions and transmetalation of cadmium(II) tetrabenzoporphyrinate with cobalt(II) acetate and chloride in dimethylformamide (DMF) has been carried out Cobalt(III) tetrabenzoporphyrinate has been prepared and identified. Acido ligands displacement in Co(III) tetrabenzoporphyrinate by pyridine, imidazole, and quinuclidine molecules has been studied.     

Synthesis and microstructure-mechanical property relationships of segmented polyurethanes based on a PCL-PTHF-PCL block copolymer as soft segment

The goal of this work has been the synthesis of novel materials based on a biodegradable polycaprolactone-block-polytetrahydrofurane-block-polycaprolactone diol (PCL-b-PTHF-b-PCL). The segmented thermoplastic polyurethanes (STPU) have been synthesised in bulk without catalyst at different molar ratios and their characterization has been performed by different techniques. The physic-chemical interactions, responsible for the unique polyurethane properties, have been evaluated by total attenuated Fourier transform infrared spectroscopy (ATR-IR) in the amide I region using a Gaussian deconvolution technique and, on the other hand, atomic force microscopy (AFM) has been employed to determine the phase microstructures. The effect of increase the hard segment content (HS) has been discussed from the viewpoint of the miscibility of hard and soft segments, analyzed by differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA) and thermogravimetric analysis (TGA). The influence of HS content on the microstructure-mechanical property relationships has also been investigated. Special attention has been focused on the wettability of the samples, measured through water contact angle measurements (WCA), to determine the tendency for biocompatibility of the samples.     

Reversed phase extraction chromatographic separation of ruthenium(III)

A new an innovative separation method has been developed using N-n-octylaniline (liquid anion exchanger) coated on silica gel. Ruthenium(III) has been extracted quantitatively from 0.05 M hydrochloric acid, striped with aqueous solution of various acids and then determined by spectrophotometric method. Mutual separation scheme for ruthenium(III), iridium(III) and osmium(VIII) has been developed. Ruthenium(III) has been separated from commonly associated elements. Different parameter are studied viz effect of acid concentration, reagent concentration, striping agent, flow rate, foreign ion and synthetic mixture corresponding to alloys. Validity of method has been verified by separation of ruthenium(III) from fissium alloy.     

The application of solid sorbents for the purification of aluminum contaminated chemicals used as modifiers in electrothermal atomic absorption spectrometry

Various microcolumns with solid sorbents (ion exchange resins, functionalised cellulose sorbents, chelating resins) have been tested with respect to their ability for the purification of aluminum contaminated chemicals used as modifiers in electrothermal atomic absorption spectrometry. The purification of NaNO(3), Mg(NO(3))(2), K(2)SO(4) and (NH(4))(2)HPO(4) has been the most effective with an almost 100% efficiency, when Spheron-Oxine was used as chelating resin. The sorption of aluminum from KOH solution has been found to be very high (around 90%) for all investigated sorbents. However, the best results have been obtained with anion-exchange resins. It has been difficult to purify concentrated mineral acids (HCl, H(2)SO(4)). A retention of aluminum above 80% has been achieved only when Cellex P, Chelex 100 or Amberlite XAD-2 have been used.     

Photomagnetic properties in a series of spin crossover compounds

The spin crossover (SC) compounds [Fe(PM-AzA)2(NCX)2] and [Fe(PM-FIA)2(NCX)2] (with PM-AzA = N-2'-pyridylmethylene-4-(phe-nylazo)aniline, PM-FIA = N-2'-pyridylmethylene-4-(2-amino)fluorene, and X = S, Se) have been prepared. The SC regimes have been deduced from variable-temperature magnetic susceptibility data. The enthalpy and entropy changes associated with the SC have been evaluated from DSC measurements. A cooperativity factor, C, has been defined, and its values for the different compounds have been deduced from the spin crossover curves. At 10 K, the light-induced excited spin state trapping (LIESST) effect has been observed within the cavity of the SQUID magnetometer. The critical temperatures Tc(LIESST) have been determined for [Fe(PM-AzA)2(NCS)2] and [Fe(PM-F1A)2(NCX)2], and the role of cooperativity has been analyzed. A linear correlation has been found between the Tc(LIESST) and C values. The kinetics of HS-->LS relaxation have been investigated; a thermally activated mechanism at elevated temperatures and a nearly temperature independent relaxation behavior at low temperatures have been found. Finally, the magnetic behavior recorded under light irradiation in the warming and cooling modes has revealed the occurrence of the light-induced thermal hysteresis (LITH) effect.     

Determination of cadmium and copper with ET-AAS after electrochemical deposition on a graphite electrode

The electrodeposition of cadmium and copper on a special graphite disk electrode has been performed at controlled potential. The electrode with the deposit has been inserted into the graphite atomizer HGA-400 by an adapted automatic sampler for the final determination by ET-ASS. The sensitivity of determination has been 0.371 (microg l(-1))(-1) for cadmium and 0.025 (microg l(-1))(-1) for copper for 2 min electrodeposition and increased linearly with the time of deposition. The limit of detection (3s(bl)) has been 7.9 ng l(-1) Cd(2+) and 0.11 microg l(-1) Cu(2+) for 2 min deposition and it has been improved with increased time of electrodeposition. The technique has been applied to the determination of both metals in seawater and to speciation in the presence of EDTA complexing agent.     

焦磷酸盐溶液中铜电沉积过程 Ⅱ. 用旋转电极的研究

焦磷酸铜络合物还原过程中要经过一价铜这个中间产物在一些文献中都假设过。这个问题不仅是有兴趣的理论问题,而且也很有实际价值。因为在工业电镀中经常出现的所谓“铜粉”,常常影响镀层的质量。简单的Cu~(2+)离子在氧化物溶液中进行阴极还原时,曾经用旋转圆环-圆盘电极(RRDE)的方法实验证实了一价铜中间产物的存在。但是在铜以络离子存在时,尤其是在过剩的焦磷酸离子存在下,使得还原在较负的电位下进行。这时是否有一价铜中间产物,尚未见到RRDE的研究。用RRDE研究络离子还原的工作还很少。可是这一有力方法的应用将会揭示许多一般方     

A novel tricarbonyl rhenium complex of 2-benzoylpyridine - Synthesis, spectroscopic characterization, X-ray structure and DFT calculations

The reaction of Re(CO)₅Cl with 2-benzoylpyridine (bopy) has been examined and a novel Re(CO)₃⁺ tricarbonyl - fac-[Re(CO)₃(bopy)Cl] - has been obtained. The compound has been studied by IR, UV-Vis spectroscopy and X-ray crystallography. The molecular orbital diagram of the tricarbonyl has been calculated with the density functional theory (DFT) method. The spin-allowed singlet-singlet electronic transitions of [Re(CO)₃(bopy)Cl] have been calculated with the time-dependent DFT method, and the UV-Vis spectrum of the title compound has been discussed on this basis.     

Reactivity of sulfur nucleophiles with N-methyl-N-nitroso-p-toluenesulfonamide

The transfer of the nitroso group from N-methyl-N-nitroso-p-toluenesulfonamide (MNTS) to cysteine (CYS) and 2-aminoethanethiol (AET) has been studied in a pH range between pH = 7 and pH = 13. Kinetic results clearly indicate that both nucleophiles react through the corresponding thiolate to give the corresponding nitrosothiol. The existence of two (AET) or three (CYS) macroscopic acidity constants has been kinetically evidenced and the nitrosation rates of the corresponding bases have been identified. Nitrosation rate constants of the different species present in the reaction medium have been determined and a Bronsted-type plot has been established giving a beta(nuc) value approximately equal to 0.08 clearly different from the values of beta(nuc) approximately equal to 0.7 obtained in the nitrosation of primary and secondary amines by MNTS. The low beta(nuc) value has been attributed to the need for previous desolvation of the nucleophile.     

Cytotoxicity of PMMA-Based Nanoparticles Synthesized Adopting SDS and Tween 80

Summary: in this work the cytotoxicity of PMMA-based nanoparticles against mouse mammary cancer cells (4T1) has been investigated. NPs have been synthesized using either monomer starved semi-batch emulsion polymerization (MSSEP) or standard batch emulsion polymerization (BEP) processes adopting potassium persulfate (KPS) as initiator and two different emulsifiers: sodium dodecyl sulfate (SDS) and Tween 80. The toxicity of NPs produced using SDS has been confirmed in in vitro experiments while it has been found that NPs stabilized with Tween 80 show a good biocompatibility. Moreover, the absence of toxicity of NPs in which the SDS is substituted with Tween 80 adopting ion exchange resins (IER) has been proved. Finally the biocompatibility of the sulfate chain end groups coming from the adopted initiator has been assessed.     

Measurement of absolute absorption cross sections for nitrous acid (HONO) in the near-infrared region by the continuous wave cavity ring-down spectroscopy (cw-CRDS) technique coupled to laser photolysis

Absolute absorption cross sections for selected lines of the OH stretch overtone 2ν(1) of the cis-isomer of nitrous acid HONO have been measured in the range 6623.6-6645.6 cm(-1) using the continuous wave cavity ring-down spectroscopy (cw-CRDS) technique. HONO has been generated by two different, complementary methods: in the first method, HONO has been produced by pulsed photolysis of H(2)O(2)/NO mixture at 248 nm, and in the second method HONO has been produced in a continuous manner by flowing humidified N(2) over 5.2 M HCl and 0.5 M NaNO(2) solutions. Laser photolysis synchronized with the cw-CRDS technique has been used to measure the absorption spectrum of HONO produced in the first method, and a simple cw-CRDS technique has been used in the second method. The first method, very time-consuming, allows for an absolute calibration of the absorption spectrum by comparison with the well-known HO(2) absorption cross section, while the second method is much faster and leads to a better signal-to-noise ratio. The strongest line in this wavelength range has been found at 6642.51 cm(-1) with σ = (5.8 ± 2.2) × 10(-21) cm(2).     

Studies on extraction of Cu(II), Ga(III), In(III) and Tl(III) with 1-phenyl-3-methyl-4-benzoylpyrazol-5-one Separation and spectrophotometric determination of copper and gallium

The extraction of Cu(II), Ga(III), In(III) and Tl(III) with 1-phenyl-3-methyl-4-benzoylpyrazol-5-one (HPMBzP) from aqueous solutions has been investigated. The mechanism of extraction and the composition of the species extracted has been determined. The effect of equilibration time, various organic solvents and salting-out agents on the extraction of copper and gallium has also been investigated. The green Cu(PMBzP)₂ chelate has absorption maxima at 298 and 670 nm, and PMBzP has maximum absorbance at 290 nm. A new and sensitive spectrophotometric method for copper has been devised, based on the absorbance at 670 nm. The presence of excess of reagent does not interfere and no special treatment is necessary to destroy it. The proposed method has some advantages and has been applied for the determination of copper in various soil samples. Gallium has been separated from indium, thallium, copper, iron and many other elements. The recovery of gallium and copper was 100 ± 0.2%.     

1-甲基-3,5-二苯基吡唑啉在氯化铜催化下的氧化脱氢反应(Ⅱ)——计量反应与氧分子的作用阶段

我们在合成1-甲基-3,5-二苯基吡唑(MDPP)的过程中,发现氯化铜、氯化钴等化合物对1-甲基-3,5-二苯基吡唑啉(H₂MDPP)的氧化脱氢反应具有优异的催化性能,对以氯化铜为催化剂的反应机理进行了初步研究,获得了反应过程中形成铜(Ⅱ)H₂MDPP、铜(Ⅱ)MDPP和铜(Ⅱ)H₂MDPP分子氧配合物的证据。另外,在催化氧化反应体系中曾检测到一价铜,这显然是氯化铜的还原产物,故本文对氯化铜与H₂MDPP的计量反应及在催化反应中氧分子参与作用的阶段进行了研究。     

Solvent extraction of Sb(III) with malachite green into chloroform

A rapid and selective method for the solvent extraction of Sb(III) using malachite green (C. I. Basic green 4) has been described. Effect of different parameters affecting the extraction coefficient value of Sb(III) such as acidity, time of equilibration, KI concentration, solvents, anions, etc. has been studied. For various elements the separation factor has been evaluated. The stoichiometry of the extracted species has been determined by the method of substoichiometric extraction. The decontamination factor for some elements using substoichiometric quantities of the extracting agent has been evaluated. Radiotracers were employed for the extraction studies. The method elaborated has been employed for the quantitative determination of antimony in normal, benign and cancerous tissues of the human brain.     

Studying the Adsorption of an Iron(II) Complex of 1,10-Phenanthroline on Laboratory Glassware Using Thermal Lens Spectrometry

The adsorption of iron(II) tris(1,10-phenanthroline) on the glass surface of laboratory ware from solutions has been studied by thermal lens spectrometry at a level of nanogram amounts. The effect of glass pretreatment on the fraction of the adsorbed substance has been studied, and the most appropriate variant of the pretreatment has been selected. The kinetics of iron(II) tris(1,10-phenanthroline) adsorption on the surface of laboratory glass has been studied, and an adsorption isotherm has been constructed for nanogram chelate contents of the solution. The process is most closely approximated by the Freundlich equation. Based on the obtained data, a procedure has been proposed for the preparation of solutions for constructing calibration relationships that can be used in thermal lens measurements of trace amounts of analytes. This procedure takes into account the loss of substances at the surface of laboratory glassware.     

Intermediate-spin state of a 3d ion in the octahedral environment and generalization of the Tanabe-Sugano diagrams

Electronic spectra of 3d(n) transition ions in an octahedral ligand surrounding have been studied using the modified crystal field approach (MCFA), which includes a relativistic spin-orbital interaction. A new variable parameter, the effective nuclear charge Z(eff) of a metal ion that allows accounting implicitly the covalence degree of a metal-ligand bond, has been introduced. Energy diagrams similar to the Tanabe-Sugano ones have been calculated. To study the spin state evolution of the metal ion in an arbitrary distorted octahedral complex, a spin state diagram approach has been proposed. The intermediate-spin (IS) state problem for 3d(4), 3d(5), and 3d(6) metal ions has been considered and conditions for the IS state realization have been formulated. The regions of the mixed high-, intermediate-, and low-spin states have been found. The possibility of coexistence of the different spin states of 3d ions in the octahedral complexes has been considered using crystallography data for the YBaCo(2)O(5.5) layered cobaltite.     

Separation of transition metal ions and preconcentration of platinum (IV) and chromium (III) on alumina-immobilized diethylenetriaminepentaacetic acid by ligand exchange

Summary Basic alumina-bonded diethylenetriaminepentaacetic acid (DTPA) has been utilized for the separation and preconcentration of some transition metal ions on the basis of ligand exchange. Breakthrough capacity and rate of sorption have been studied. The distribution coefficients of 16 transition metal ions have been determined in demineralized water, 0.01 M sodium citrate and in four different pH systems. On the basis of differences in Kd values some quantitative separations of metal ions have been achieved. The greater selectivity behaviour (higher Kd values) of the adsorbent for Pt(IV)and Cr(III) has been utilized for their preconcentration in the presence of other metal ions. The method has been employed for the recovery of Pt(IV) and Cr(III) from tapwater and sea-water samples.     

Fluorimetric determination traces of aluminium in soil extracts

Salicylaldehyde picolinoylhydrazone (SAPH) form a fluorescent complex with aluminium (lambda(ex) = 384 nm, lambda(em) = 468 nm) in acidic medium (stoichiometry 1:3, Al:SAPH). Two procedures based on the direct or standard additions methods has been proposed for the determination of concentrations down to 1-2 mug/dm(3) of Al(III). The effects of 72 ions in the method has been evaluated and different masking agent reactions have been tested. The method has been used satisfactorily for the determination of aluminium at a level of mug/dm(3) in acetate extracts of several agricultural soils. The method has been compared favourably with ICP spectroscopy emission.