Mechanism of dehydrodimerization of aromatic substrates by aluminium chloride-cupric chloride

The following results were obtained from oxidation of the appropriate aromatic hydrocarbons with AlCl₃-CuCl₂: 1-(2,4,6-trimethylphenyl)naphthalene from naphthalene-meistylene, 2,2'-bifluorene from nuorene, 2,2'-bifluorene from fluorene-mesitylene, and bimesityl and 3,3'-dichlorobimesityl from mesitylene. Mechanistically, radical cations are presumed to function as intermediates. Generally, coupling seems to proceed by cation attack on an aromatic molecule. Other pathways may pertain in certain cases, e.g. radical dimerization of radical cations.     

Enthalpies of solution and of crystallization of lithium nitrate and of lithium nitrate trihydrate in water at 25°C

The enthalpies of crystallization of LiNO₃ and LiNO₃–3H₂O from aqueous solutions at 25°C, measured by a calorimetric method and determined from the previously published data on the concentration dependence of the enthalpy of solution, are reported. The results are compared with the values obtained from the concentration dependences of the activity coefficients and from the temperature dependences of the solubilities. The enthalpy of solution at infinite dilution and the enthalpy of hydration are given.     

Radioactivity of coals and fly ashes

The level and the behavior of the naturally occurring primordial radionuclides ²³⁸U, ²²⁶Ra, ²¹⁰Pb, ²³²Th, ²²⁸Ra and ⁴⁰K in coals and fly ashes are described. The activity concentrations of the examined coals and originated from coal mines in Greece ranged from 117 to 435 Bq·kg⁻¹ for ²³⁸U, from 44 to 255 Bq·kg⁻¹ for ²²⁶Ra, from 59 to 205 Bq·kg⁻¹ for ²¹⁰Pb, from 9 to 41 Bq·kg⁻¹ for ²²⁸Ra and from 59 to 227 Bq·kg⁻¹ for ⁴⁰K. These levels are comparable to those appeared in coals of different countries worldwide. The activity concentrations of the examined fly ashes and produced in coal-fired power plants in Greece ranged from 263 to 950 Bq·kg⁻¹ for ²³⁸U, from 142 to 605 Bq·kg⁻¹ for ²²⁶Ra, from 133 to 428 Bq·kg⁻¹ for ²¹⁰Pb, from 27 to 68 Bq·kg⁻¹ for ²²⁸Ra and from 204 to 382 Bq·kg⁻¹ for ⁴⁰K. The results showed that there is an enrichment of the radionuclides in fly ash relative to the input coal during the combustion process. The enrichment factors (EF) ranged from 0.60 to 0.76 for ²³⁸U, from 0.69 to 1.07 for ²²⁶Ra, from 0.57 to 0.75 for ²¹⁰Pb, from 0.86 to 1.11 for ²²⁸Ra and from 0.95 to 1.10 for ⁴⁰K.     

HPLC Fingerprint Characteristics of Active Materials of Garlic and Other Allium Species

The bioactive molecules of garlic are classified according to their enzymatic activities as either alliinase activators or alliinase inactivators. The alliinase activation reaction system is mainly composed of sulfur-containing compounds, whereas the alliinase inactivation system is mainly composed of amino acid-based materials. The purpose of this study was to develop an effective way to digitally express features of complex active compounds of garlic as a basis for quality control. HPLC was used to develop the fingerprints of plants from different Allium species and different geographical regions according to whether the compounds were sulfur containing or based on amino acids. Using the Shannon equation, I values of sulfur-containing compounds from garlic ranged from 3.55 to 3.94, whereas I values of sulfur-containing compounds from other Allium plants, onions, leek, and Welsh onion, ranged from 3.38 to 3.53. The I values of amino acid-based compounds from garlic ranged from 3.67 to 3.91, whereas I values of these compounds from other Allium plants ranged from 3.88 to 3.99. This method effectively distinguished garlic from different species of Allium plants. This method also provided a way to digitally monitor the presence of complex active compounds of garlic and may allow evaluation of quality. This method may also provide a theoretical basis for quality control of bioactive compounds from other medicinal plants.     

Characterization of physical structure of silica nanoparticles encapsulated in polymeric structure of polyamide films

Polyamide nanocomposite films were prepared from nanometer sized silica particles and trimesoyl chloride–m-phenylene diamine based polyamides. The type of silica nanoparticles used is commercial LUDOX^® HS-40 and the particle size characterized by the radius of gyration (R_g) is about 66 Å. The immediately prepared films were easily broken into particles to form colloidal-like dilute suspension of the silica–polyamide composite particles in D₂O–H₂O solutions for SANS measurements, that in this dilute system SANS data the complication of scattering data from the interacting particles is minimized. At about 60% D₂O of the sample solution, the silica is contrasted out, therefore the SANS profiles are predominantly from the organic polyamide scattering. The SANS profile of the sample solutions measured at 90% D₂O clearly indicates scattering from both silica and polymer. The scattering heterogeneities for two-phase system were evident from the validity of the Debye–Bueche expression in case of the nanocomposite with high silica loading. At limited silica loading of the nanocomposite, interaction between the silica and polymer chains forming core–shell morphology was observed. The transport properties of the membranes made from the nanocomposite films were measured on a batch type test kit with an aqueous solution of 500 ppm dioxane concentration at pressures ranging from 50 to 200 psig, and correlated to their composite structure.     

Microdistributions of Electrolytic Alloys and Their Components

Microdistributions of Cu–Ni and Cu–Co alloys electrodeposited from pyrophosphate; Ni–Cu, from sulfate–chloride and pyrophosphate–ammonium; Cu–Zn, from pyrophosphate and cyanide; Cu–Cd, from sulfate and pyrophosphate; and Ni–Cd, Ni–Co–Cd, and Zn–Cd, from sulfate, sulfate–chloride, pyrophosphate, chloride–ammonium, and acetate electrolytes are studied. The coatings' microprofile depends on the kinetics of reduction of each component and mutual influence of electrochemical processes at the cathode. Copper accelerates and cadmium inhibits the reduction of the second component of alloys, no matter the electrolyte type, reduction kinetics, and metal nature. In antileveling conditions, the diffusion-controlled Cu reduction accelerates the reduction of the second component of alloys and ensures deposition of coatings whose microprofiles are more uniform than expected from diffusion limitations only. Depolarizing action of Cu during the Cu–Zn deposition from a cyanide electrolyte can completely neutralize differences in the rates of supply of reduced metal ions; hence a constant chemical composition of the coating over its microprofile. Inhibiting action of the diffusion-controlled Cd deposition provides for leveling properties of electrolytes from which Ni–Cd, Ni–Co–Cd, and Zn–Cd alloys are deposited; the chemical composition of these deposits is nonuniform over their microprofiles.     

Phytochemical analysis of non-polar solvent extracts of the Wisteria sinensis leaves

A comparative study on the phytochemical composition of the n-hexane and chloroform extracts from Wisteria sinensis leaves collected in June and October is described. Continuous extraction in Soxhlet apparatus, as well as ultrasound-assisted technique, was used for the preparation of the extracts. All the extracts were analysed by GC/MS method. As a result, α-tocopherol was identified as the main component (56%) of the extracts from October leaves, whereas, β-sitosterol was identified as the main compound (47%) in the extracts from the June leaves. Additionally, pure α-tocopherol was isolated from n-hexane extract of the October leaves using column chromatography. A total of 6.25 mg of α-tocopherol was isolated from 1 g of dried leaves. The presence of the vitamin E in extracts from W. sinensis leaves is described here for the first time.     

Radiochemical characterization of spring waters in Balaton Upland, Hungary, estimation of radiation dose to members of public

Hungary is rich in spring waters. A survey studying the naturally occurring alpha emitter radionuclides in 30 frequently visited and regularly consumed spring waters was conducted out in the Balaton Upland region of Hungary.²²⁶Ra, ²²⁴Ra, ²³⁴U, ²³⁸U and ²¹⁰Po activity concentrations were determined by using alpha spectrometry after separation from matrix elements. Average concentration (mBq L^{− 1}) of ²²⁶Ra, ²²⁴Ra, ²³⁴U, ²³⁸U and ²¹⁰Po in the spring waters is varied from 2.1 to 601, from < 1.1 to 65.4, from 3.9 to 741.9, from < 0.44 to 274.3 and from 2 to 15.2 respectively. In most cases radioactive disequilibrium was observed between uranium and radium isotopes. The doses for the analyzed samples of spring water are in the range 3.59–166.73 μSv y^{− 1} with an average 18.2 μSv y^{− 1} .This is well below the 100 μSv y^{− 1} reference level of the committed effective dose recommended by WHO. Only one water sample had a dose higher than 100 μSv y^{− 1}, mainly due to the contribution from radium (²²⁶Ra, ²²⁴Ra) and ²¹⁰Po isotopes. This study provides important information for consumers and authorities about their internal radiological exposure risk from spring water intake.     

Effect of conditions on fast pyrolysis of bamboo lignin

Products derived from bamboo EMAL pyrolysis were investigated by means of pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS) and the effects of temperature and catalyst (sodium chloride, permutite) on the yields of pyrolysis products were probed in detail. The results showed that thermal degradation of EMAL mainly occurred at the temperature range from 250 °C to 600 °C, and both the temperature and catalyst in EMAL pyrolysis were important factors in the formation or inhibition of products. The products that derived from p-hydroxyphenylpropanoid, guaiacylpropanoid, and syringylpropanoid of lignin units by pyrolytic reactions were classified as the heterocycle (2,3-dihydrobenzofuran), phenols, a small quantity of acetic acid and furans, etc. With an increase of pyrolysis temperature, the amount fraction of 2,3-dihydrobenzofuran (DHBF) decreased from 66.26% to 19.15%. Moreover, when the additive catalyst increased from 5% to 20%, permutite catalyst improved in the formation of DHBF from19.15% to 24.19%, whereas NaCl catalyst was effective to inhibit the production of DHBF from 19.15% to 13.08%. Permutite promoted the production of coke from EMAL pyrolysis, conversely, NaCl had an inhibiting effect on the generation of coke. And NaCl catalyst had a significant catalytic effect on raising or reducing of the product yields in bamboo lignin pyrolysis.     

Extraction of Co-Products from Biomass: Example of Thermal Degradation of Silymarin Compounds in Subcritical Water

In an effort to increase revenues from a given feedstock, valuable co-products could be extracted prior to biochemical or thermochemical conversion with subcritical water. Although subcritical water shows significant promise in replacing organic solvents as an extraction solvent, compound degradation has been observed at elevated extraction temperatures. First order thermal degradation kinetics from a model system, silymarin extracted from Silybum marianum, in water at pH 5.1 and 100, 120, 140, and 160 °C were investigated. Water pressure was maintained slightly above its vapor pressure. Silymarin is a mixture of taxifolin, silichristin, silidianin, silibinin, and isosilibinin. The degradation rate constants ranged from 0.0104 min⁻¹ at 100 °C for silichristin to a maximum of 0.0840 min⁻¹ at 160 °C for silybin B. Half-lives, calculated from the rate constants, ranged from a low of 6.2 min at 160 °C to a high of 58.3 min at 100 °C, both for silichristin. The respective activation energies for the compounds ranged from 37.2 kJ/gmole for silidianin to 45.2 kJ/gmole for silichristin. In extracting the silymarin with pure ethanol at 140 °C, no degradation was observed. However, when extracting with ethanol/water mixtures at and 140 °C, degradation increased exponentially as the concentration of water increased. An erratum to this article can be found at     

Terpenoids of the needles of Picea abies

The composition of the terpenoids of the neutral petroleum-ether-soluble substances from an isopropanol extract of the needles of the Norway spruce has been studied. The main components of the extractive substances are polyprenol acetates, alcohols with the labdane type of structure, and epimanool and epitorulosol. It has been shown that the terpenoids from the needles differ in composition from the extractive substances of the trunk part of the tree and those from the oleoresins of the sprucesPicea abies, P. ajanensis, andP. obovata.S. M. Kirov Leningrad Academy of Wood Technology. Translated from Khimiya Prirodnykh Soedinenii, No. 2, pp. 168–176, March–April, 1986.     

Observation of the phosphorescence spectra from the spin sublevels of low emissivity: quinoxaline

A method to observe the phosphorescence emissions from the spin sublevels of low emissivity is proposed, and its application to quinoxaline is attempted. The newly observed phosphorescence spectra from the T_x and T_y sublevels differ considerably in vibrational structures from the usually observed phosphorescence from the T_z sublevel.     

Synthesis and properties of polyesters of isomeric poly(oxynaphthyleneoxy-2-bromoterephthaloyl)s

A series of aromatic polyesters were prepared from 2-bromoterephthalic acid and naphthalenediol isomers. Only the polymers obtained from 1,4-, and 1,5- and 2,6-naphthalenediols were thermotropic nematogens and those from bent naphthalenediols were not liquid crystalline. Only the polyesters derived from 1,4-, 1,5-, and 2,6-naphthalenediols were semicrystalline. The melting temperatures ranged from 319 to 374°C depending on the structure of naphthalenediol moiety. The glass transition temperature, T_g, ranged from 95 to 168°C. TGA studied revealed that the polyesters have fairly good thermal stability     

Uncertainty of decay heat calculations originating from errors in the nuclear data and the yields of individual fission products

The calculation of the abundance pattern of the fission products with due account taken of feeding from the fission of²³⁵U,²³⁸U, and²³⁹Pu, from the decay of parent nuclei, from neutron capture, and from delayed-neutron emission is described. By means of the abundances and the average beta and gamma energies the decay heat in nuclear fuel is evaluated along with its error derived from the uncertainties of fission yields and nuclear properties of the individual fission products.     

Adsorption of traces of hafnium on manganese dioxide from acid solutions

Adsorption of hafnium on manganese dioxide from nitric and perchloric acid solutions has been studied and optimized with respect to shaking time, concentration of acid, oxide and metal. Maximum adsorption has been noticed from 0.1 mol · dm^–3 acid solutions in 20 minutes around 10^–5 mol · dm^–3 hafnium concentration. The adsorption of hafnium follows a Freundlich adsorption isotherm. Oxalate, thiosulfate, Na(I) and Al(III) from nitric acid and K(I) and Zn(II) from perchloric acid increase the adsorption, whereas all other anions and cations tested reduce the adsorption from both media Fe(III) and Sn(IV) significantly. Zn(II) and Co(II) show low adsorption affinity.     

Contribution to the study of the mechanism of curing of unsaturated polyester resins

The mechanism of copolymerization of monomethyl and dimethyl maleates and fumarates with styrene was studied by analysis of the conformation of the acid units of the resulting copolymers. The absorption bands for C?O stretching and OH stretching in the spectra of the copolymers are fully identical. They are quite different from the spectra of the copolymers obtained from maleic anhydride and styrene that are subsequently treated with absolute methanol to give the monoester which is then esterified with diazomethane to give the diester. The acid units of the copolymers derived from maleic anhydride exist in a gauche configuration; copolymers derived from fumaric units exist in a trans conformation. The identity of copolymers derived from maleic units with those derived from fumaric units but not with those derived from maleic anhydride indicates that the first step in the copolymerization of the maleic units is an isomerization to fumaric units, which are actually the genuine comonomers.     

Tuning the aspect ratio of hydrothermally grown ZnO by choice of precursor

Variable aspect ratio (length/diameter), one dimensional ZnO nanostructures are synthesized by reacting Zn²⁺ precursor derived from Zn·Ac₂, Zn·Cl₂ and Zn·(NO₃)₂ under hydrothermal treatment. The growth mechanism illustrating the formation of self-assembling from individual ZnO nanoparticles to rod-like form is explained briefly. XRD reveals that the ZnO obtained from various zinc salts are pure, wurtzite structure, with crystalline hexagonal phase. The qualitative analysis of ZnO formation and morphology of ZnO nanoparticles are estimated from FESEM and TEM micrographs. Strong UV absorption corresponding to the recombination of electron-hole pair is observed and the blue shift absorption obeys the size confinement effect. The extent of absorption relatively varies when the morphology is changed from nano-bundles to individual rod-like ZnO. When electrons are excited at wavelength of 240 nm, a strong near band edge (NBE) emission and surface defects emission are observed in the PL spectra. The broader emission situated in the blue-green region of the visible spectrum, originating from surface oxygen defects, is not observed in ZnO derived from Zn·Ac₂.     

The synthesis of thienocycloheptenoindoles

A synthesis of the methylthieno[3,2-c]cyclohepteno[b]indole 7 from 2-methylthieno[3,2-b]cycloheptanone 3 is described. Unsuccessful attempts to prepare the isomeric thienocycloheptenoindole system present in formula 2 , from the dihydrobenzothiophenone 8 , and from derivatives of 5-(2-thienyl)-4-oxopentanoic acid, 17 and 18 , and from N-benzylcycloheptindol-1-one 22 were unsuccessful. The preparation of 4,5-dihydro-2-phenyl-1-thienylmethyl-3H-pyridazin-3-one 20 and of the 5-aminopyrazole 21 are reported.     

Measurement of Photoionization Cross Sections of the Excited States of Titanium

Resonance-enhanced multiphoton ionization of the titanium atoms has been investigated in the 293 321 nm wavelength. We couple a laser-ablated metal target into a molecular beam to produce free atoms. Ions produced from photoionization of the neutral atoms are monitored by a home-built time-of-flight mass spectrometer. Photoionization cross sections of the excited states of Ti I were deduced from the dependence of the ion signal intensity on the laser intensity for photon energies close to the ionization threshold. The values obtained range from 0.2 Mb to 6.0 Mb. No significant isotope-dependence was found from measurements of the photoionization cross sections of ^46Ti, ^47Ti, and ^48Ti.     

Comparison of the nutritional and phytochemical composition and antioxidant activities of Aralia elata (Miq.) Seem fruits in Northeast China

Aralia elata (Miq.) Seem is a wild medicinal and culinary plant. The newly grown shoots are edible, and the stem and root bark are traditional materials used for medicinal extraction. However, few studies have examined the quality and biological activity of the fruit. In this study, we compared the nutritional and phytochemical composition and antioxidant activity of A. elata fruit (AF) picked from five regions (Harbin, Benxi, Raohe, Jiaohe, and Mudanjiang) in Northeast China. AF picked from Harbin had the highest saponin, anthocyanin, and flavonoid contents. UHPLC-MS/MS analyses showed that araloside A was one of the main saponin monomers in AF. The highest arloside A concentration was detected in fruits picked from Harbin and the lowest concentration was detected in fruits picked from Benxi. The relative reactive oxygen species production in cells after pretreatment with AFs from Harbin (50 μg/mL) was 0.78 ± 0.01, second only to those from Raohe. AFs (50 μg/mL) from Harbin had the highest catalase activity (43.61 ± 0.44 U/mg protein), followed by that of the AF collected from Jiaohe, Benxi, Mudanjiang and Raohe. The malondialdehyde levels of the AFs (50 μg/mL) obtained from Benxi, Raohe, Jiaohe, and Mudanjiang were significantly higher than those of the AF obtained from Harbin (2.67 ± 0.15 nmol/mg protein). Compared with AFs from Benxi, Raohe, Jiaohe, and Mudanjiang, the strongest H₂O₂ scavenging ability (144.95 ± 2.89 mmol TE/100 g dm) was observed for AF from Harbin. The ferric reducing antioxidant power of AFs ranged from 7.70 to 4.52 mmol TE/100 g dm in the order of Harbin > Mudanjiang > Raohe > Jiaohe > Benxi. The results provided support for the selection of the best quality AF and the expanded cultivation of A. elata.