Motion of a slender body in a fluid under a floating plate

This paper studies the three-dimensional unsteady problem of the hydroelastic behavior of a floating infinite plate under the impact of waves generated by horizontal rectilinear motion of a slender solid in a fluid of infinite depth. An analytic solution of the problem is found based on the known solutions for the unsteady motion of a point source of mass in a fluid of infinite depth under a floating plate. Asymptotic formulas are obtained which model the motion of a solid slender body in a fluid by replacing the body with a source-sink system. These formulas are used to numerically analyze the effect of plate thickness, depth of the body, its dimensions and the velocity of rectilinear motion on the amplitude of deflection of the floating plate. The motion of a submarine under a nonbreakable plate was modeled experimentally. Theoretical and experimental data are in good agreement.     

Asymptotic nonlinear solution of the problem of the penetration of a compressible fluid by a slender body

A combined solution of the problem of the penetration of a compressible fluid by a slender wedge and a cone is found by the method of matched asymptotic expansions. The new solution is based on taking into account the nonlinear terms in the Cauchy-Lagrange integral and is uniformly applicable in the neighborhood of the nose.Translated from Izvestiya Rossiiskoi Akademii Nauk, Mekhanika Zhidkosti i Gaza, No.4, pp. 49–57, May–June, 1993.     

Flow near the rear end of a slender axisymmetric body

The steady flow of a viscous incompressible fluid at high Reynolds numbers near a body of revolution of finite length whose radius coincides in order of magnitude with the thickness of the boundary layer is considered. The structure of the boundary layer in the neighborhood of the rear end of the body is investigated on the assumption that it has a power-law shape with values of the exponent n 1/2. A solution is also obtained for the near wake.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 5, pp. 10–18, September–October, 1990.     

Motion of a slender body in quiescent polymer solutions

The motion of a slender body falling in quiescent polymer solutions is investigated experimentally. It represents the simplest model of motion of single fibers in the flow of fiber suspensions. The fall behavior in quiescent polymer solutions is compared with that in water. It is demonstrated that a slender body falling in Newtonian liquids rotates to adopt a horizontal orientation, whereas in non-Newtonian liquids it rotates towards a vertical orientation but for less concentrated solutions is not able to reach the vertical orientation and moves sideways with a constant orientation angle. The effects of shear thinning and elasticity on the motion of the body are discussed.     

Entry of a disk into a compressible fluid at an angle to the free surface

The available experimental results are used to find the dependence on the Mach number of the maximal impact drag coefficient and the growth time of the impact load when a disk enters a compressible fluid at an angle to the free surface. The elastic properties of the disk are not taken into account, i.e., the disk is assumed to be absolutely rigid.     

Motion of a variable-volume sphere in an ideal fluid near a plane surface

The motion of a spherical cavity in a fluid is investigated. The radius of the sphere varies under the action of a constant pressure at infinity. The problems of the collapse of a cavity moving in an unbounded fluid and of the collapse of a cavity near a plane are solved in the exact formulation. The occurrence of an initial translational velocity or the presence of a solid surface, by contrast with the collapse of a sphere at rest in an unbounded fluid [1], yields a limiting radius at which the process of collapse ceases. A sphere initially at rest near a plane always comes into contact with the plane as a result of collapse. The radius and velocities at which the sphere arrives the plane are calculated for various initial distances from the latter. The possible mechanism of the action of a cavitation bubble on a solid surface is discussed.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 5, pp. 94–103, September–October, 1971.     

Motion of a cylinder below the free surface of a fluid at large froude numbers

A method of solving the problem of the motion of a cylinder of given shape below the free surface of an infinitely deep heavy fluid is perfected for large Froude numbers. The motion of a circular cylinder is investigated at small distances from the free surface. Solutions of the problem are given for cylinders with noncircular cross-sections. Kazan. Translated from Izvestiya Rossiiskoi Akademii Nauk, Mekhanika Zhidkosti i Gaza, No. 4, pp. 34–45, July–August, 2000. The work was carried out with financial support from the Russian Foundation for Basic Research (projects Nos. 99-01-00169 and 99-01-00173).     

Oblique entry of a slender body in an incompressible fluid

The plane problem of oblique penetration of a slender semiinfinite body in an ideal, weightless, and incompressible fluid is examined. Detailed numerical computations are performed for a wedge with rectilinear sides. The formulas obtained are applicable also for the calculation of the hydrodynamic reactions during emergence of a body from a fluid or during transverse motion of a half-blunt body with a low relative velocity. Moreover, the results of the present paper can be used to evaluate the hydrodynamic forces acting on underwater wings or propeller blades during intersection with a free surface.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 5, pp. 16–24, September–October, 1977.     

Experimental determination of the pressure on a disk entering a compressible fluid at an angle to the free surface

The results of experiments to determine the pressure on the surface of a disk entering a compressible fluid at an angle to the free surface are presented.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 2, pp. 21–25, March–April, 1988.     

Asymptotic theory of the flow near the rear end of a slender axisymmetric body

Steady high-Reynolds-number flow of a viscous incompressible fluid past a slender axisymmetric body is considered. The structure of the near wake and the boundary layer in the vicinity of the rear end of the body is studied. The relationship between the maximum relative body thickness and the rearend shape giving a local boundary layer — potential flow interaction zone in a small neighborhood of the rear end is found. The boundary value problem for this region is solved numerically.Translated from Izvestiya Rossiiskoi Akademii Nauk, Mekhanika Zhidkosti i Gaza, No. 5, pp. 68–77, September–October, 1993.     

Impact interaction of cylindrical body with a surface of cavity during supercavitation motion in compressible fluid

The paper deals with the early stage of impact of a solid cylindrical body on the surface of a cylindrical cavity for zero and non-zero gap between the cavity surface and the body surface. As a result, the stated mixed non-stationary boundary value problem with the unknown variable in the time boundary is formulated. Its solution is reduced to a joint solution of an infinite system of linear integral Volterra equations of the second kind and the differential equation of the body movement. In the case of simplified formulation, the solution is reduced to the infinite sequence of the linear integral Volterra equations. Hydrodynamic and kinematic characteristics are also obtained.     

Structure and evolution of the airflow generated by a slender body entry near a tube

When a slender body moving forward in open air enters into a confined region, two important unsteady aerodynamic phenomena are generated. An exiting flow is created with a direction opposite to the body movement and inside the confined region, a compression wave is formed. Generation mechanism of compression wave have been extensively studied but so far, no detailed investigation of the exiting flow has ever been reported. The experimental study presented in this paper was undertaken to gain insight into the structure and the evolution of the exit-flow. Experiments were conducted with an axisymmetric apparatus and the explored range of the moving body speed was 5–50 m/s. The study focused on the influence of the body speed and the body nose geometry on the flow. It was shown that the air ejected from the tube entrance generates an annulus jet accompanied by a vortex ring. The vortex development was clarified using laser sheet visualizations associated with unsteady pressure and velocity measurements at the tube entrance. It is constituted by four phases, the pre-vortex phase, the vortex development phase, the vortex convection phase and the vortex breakdown phase. The duration of each of these steps was found to be independent of both the studied parameters in a non-dimensional time scale. Furthermore, neither the body speed nor the nose geometry induced significant changes on the vortex ring evolution, except for extreme conditions (low body speed, V_M.B.<15 m/s, and/or very long nose geometry, L_nose/D_M.B.>6). The evolution of the vortex ring was compared to that of ‘classical’ vortex ring generated at a tube exit by a piston motion with large non-dimensional stroke length. Main similarities and differences were discussed in the paper. In particular, the formation number of vortex ring observed in our experiments was found to be significantly smaller.     

Motion of a slender body made of magnetizable composite in a traveling magnetic field

The motion of a slender body made of magnetizable composite in a channel, along which coils producing a heterogeneous “traveling” magnetic field are mounted, is investigated. The coil axes are vertical and lie in the same plane. A mathematical model of a slender body made of viscoelastic magnetizable material is proposed. The magnetic force is calculated from a formula used in ferrohydrodynamics of magnetic fluids with equilibrium magnetization. The problem of the motion of this body in a channel in a vertical plane under the action of the magnetic field produced in an experimental setup is numerically solved. The dependence of the body velocity on the coil switching frequency is calculated and the effect of different problem parameters on the form of this dependence is studied. The theoretical results are compared with the experimental data.     

Two-dimensional problem concerning the impact of a rigid body onto a thin elastic plate lying on the surface of a compressible fluid

Institute of Mechanics, Academy of Sciences of the UkrSSR, Kiev. Kiev Autorail Institute. Translated from Prikladnaya Mekhanika, Vol. 27, No. 9, pp. 59–66, September, 1991.     

Motion of a cylindrical cavity near a free boundary of a liquid

The dynamics of a cylindrical cavity in a liquid with no allowance for vertical displacement are considered in [1–3]. The present study investigates the pulsation motion of a cylindrical cavity near a free boundary of a liquid, allowing for displacement of the axis of the cavity in the vertical direction.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 6, pp. 173–176, November–December, 1988.     

Pressure distribution on the surface of a spherical segment entering a compressible fluid

The pressure on the progressively expanding wetted surface of a spherical segment entering a compressible fluid has been experimentally determined.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 2, pp. 9–14, March–April, 1986